Skip to contentSkip to conversation

b43: use the b43_phy masking/setting helpers where possible from lo.c

PATCH In review Harvey Harrison 1 participant 1 message Oct 3, 2008 Networking drivers (wireless)

lore
Share & tools
lore

Harvey Harrison

author
#0 lore raw

PATCH 4/8 b43: use the b43_phy masking/setting helpers where possible from lo.c

Signed-off-by Harvey Harrison <[email protected]>
---
 drivers/net/wireless/b43/lo.c |   31 ++++++++-----------------------
 1 files changed, 8 insertions(+), 23 deletions(-)
drivers/net/wireless/b43/lo.c +8 -23
index a6c185b..b41f2de 100644
@@ -393,18 +393,10 @@ static void lo_measure_setup(struct b43_wldev *dev,
 		sav->phy_cck_14 = b43_phy_read(dev, B43_PHY_CCK(0x14));
 		sav->phy_hpwr_tssictl = b43_phy_read(dev, B43_PHY_HPWR_TSSICTL);
 
-		b43_phy_write(dev, B43_PHY_HPWR_TSSICTL,
-			      b43_phy_read(dev, B43_PHY_HPWR_TSSICTL)
-			      | 0x100);
-		b43_phy_write(dev, B43_PHY_EXTG(0x01),
-			      b43_phy_read(dev, B43_PHY_EXTG(0x01))
-			      | 0x40);
-		b43_phy_write(dev, B43_PHY_DACCTL,
-			      b43_phy_read(dev, B43_PHY_DACCTL)
-			      | 0x40);
-		b43_phy_write(dev, B43_PHY_CCK(0x14),
-			      b43_phy_read(dev, B43_PHY_CCK(0x14))
-			      | 0x200);
+		b43_phy_set(dev, B43_PHY_HPWR_TSSICTL, 0x100);
+		b43_phy_set(dev, B43_PHY_EXTG(0x01), 0x40);
+		b43_phy_set(dev, B43_PHY_DACCTL, 0x40);
+		b43_phy_set(dev, B43_PHY_CCK(0x14), 0x200);
 	}
 	if (phy->type == B43_PHYTYPE_B &&
 	    phy->radio_ver == 0x2050 && phy->radio_rev < 6) {

@@ -421,17 +413,10 @@ static void lo_measure_setup(struct b43_wldev *dev,
 		sav->phy_cck_3E = b43_phy_read(dev, B43_PHY_CCK(0x3E));
 		sav->phy_crs0 = b43_phy_read(dev, B43_PHY_CRS0);
 
-		b43_phy_write(dev, B43_PHY_CLASSCTL,
-			      b43_phy_read(dev, B43_PHY_CLASSCTL)
-			      & 0xFFFC);
-		b43_phy_write(dev, B43_PHY_CRS0, b43_phy_read(dev, B43_PHY_CRS0)
-			      & 0x7FFF);
-		b43_phy_write(dev, B43_PHY_ANALOGOVER,
-			      b43_phy_read(dev, B43_PHY_ANALOGOVER)
-			      | 0x0003);
-		b43_phy_write(dev, B43_PHY_ANALOGOVERVAL,
-			      b43_phy_read(dev, B43_PHY_ANALOGOVERVAL)
-			      & 0xFFFC);
+		b43_phy_mask(dev, B43_PHY_CLASSCTL, 0xFFFC);
+		b43_phy_mask(dev, B43_PHY_CRS0, 0x7FFF);
+		b43_phy_set(dev, B43_PHY_ANALOGOVER, 0x0003);
+		b43_phy_mask(dev, B43_PHY_ANALOGOVERVAL, 0xFFFC);
 		if (phy->type == B43_PHYTYPE_G) {
 			if ((phy->rev >= 7) &&
 			    (sprom->boardflags_lo & B43_BFL_EXTLNA)) {
Signature · 1 line
1.6.0.2.471.g47a76