Skip to contentSkip to conversation

post x86 merge section mismatch fixes

PATCH Applied Marcin Slusarz 2 participants 9 messages Oct 12, 2008 – Oct 22, 2008 x86

lore
Share & tools
lore
#0 lore raw

cover post x86 merge section mismatch fixes

[PATCH 1/7] x86, xsave: fix section mismatch warning - setup_xstate_init [PATCH 2/7] x86: fix section mismatch warning - reserve_region_with_split [PATCH 3/7] x86: fix section mismatch warning - apic_flat [PATCH 4/7] x86: fix section mismatch warning - apic_physflat [PATCH 5/7] x86: fix section mismatch warning - apic_x2apic_uv_x [PATCH 6/7] x86: fix section mismatch warning - apic_x2apic_cluster [PATCH 7/7] x86: fix section mismatch warning - apic_x2apic_phys

 arch/x86/kernel/genapic_flat_64.c   |    4 ++--
 arch/x86/kernel/genx2apic_cluster.c |    2 +-
 arch/x86/kernel/genx2apic_phys.c    |    2 +-
 arch/x86/kernel/genx2apic_uv_x.c    |    2 +-
 arch/x86/kernel/xsave.c             |    2 +-
 kernel/resource.c                   |    2 +-
 6 files changed, 7 insertions(+), 7 deletions(-)

One warning left:

WARNING: vmlinux.o(.cpuinit.text+0x4ad): Section mismatch in reference from the function fpu_init() to the function .init.text:init_thread_xstate() The function __cpuinit fpu_init() references
a function __init init_thread_xstate().
If init_thread_xstate is only used by fpu_init then
annotate init_thread_xstate with a matching annotation.

x86_64 cpu_init() (marked __cpu_init) calls fpu_init() (marked __cpu_init) and fpu_init calls init_thread_xstate (which is __init) if smp_processor_id() == 0. So it's probably OK, but it should be fixed properly (without ugly __ref)

Marcin

#1 lore raw

PATCH 1/7 x86, xsave: fix section mismatch warning - setup_xstate_init

setup_xstate_init calls __init function (alloc_bootmem) and is called only from __init function (xsave_cntxt_init), so mark it static __init

WARNING: vmlinux.o(.text+0x8f7b): Section mismatch in reference from the function setup_xstate_init() to the function .init.text:__alloc_bootmem() The function setup_xstate_init() references
the function __init __alloc_bootmem().
This is often because setup_xstate_init lacks a __init
annotation or the annotation of __alloc_bootmem is wrong.

Cc Suresh Siddha <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Ingo Molnar <[email protected]>
---
 arch/x86/kernel/xsave.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/kernel/xsave.c +1 -1
index 07713d6..ed5274a 100644
@@ -272,7 +272,7 @@ void __cpuinit xsave_init(void)
 /*
  * setup the xstate image representing the init state
  */
-void setup_xstate_init(void)
+static void __init setup_xstate_init(void)
 {
 	init_xstate_buf = alloc_bootmem(xstate_size);
 	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
Signature · 1 line
1.5.6.4
#2 lore raw

PATCH 2/7 x86: fix section mismatch warning - reserve_region_with_split

In reply to Marcin Slusarz

reserve_region_with_split calls __init function (__reserve_region_with_split) and is called only from __init function (e820_reserve_resources_late), so mark it __init

WARNING: vmlinux.o(.text+0x30299): Section mismatch in reference from the function reserve_region_with_split() to the function .init.text:__reserve_region_with_split() The function reserve_region_with_split() references
the function __init __reserve_region_with_split().
This is often because reserve_region_with_split lacks a __init
annotation or the annotation of __reserve_region_with_split is wrong.

---
 kernel/resource.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
kernel/resource.c +1 -1
index 414d6fc..914cea6 100644
@@ -575,7 +575,7 @@ static void __init __reserve_region_with_split(struct resource *root,
 
 }
 
-void reserve_region_with_split(struct resource *root,
+void __init reserve_region_with_split(struct resource *root,
 		resource_size_t start, resource_size_t end,
 		const char *name)
 {
Signature · 1 line
1.5.6.4
#3 lore raw

PATCH 3/7 x86: fix section mismatch warning - apic_flat

In reply to Marcin Slusarz

WARNING: vmlinux.o(.data+0xbe08): Section mismatch in reference from the variable apic_flat to the function .init.text:flat_acpi_madt_oem_check() The variable apic_flat references
the function __init flat_acpi_madt_oem_check()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

---
 arch/x86/kernel/genapic_flat_64.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/kernel/genapic_flat_64.c +1 -1
index 9eca5ba..56d552c 100644
@@ -25,7 +25,7 @@
 #include <acpi/acpi_bus.h>
 #endif
 
-static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	return 1;
 }
Signature · 1 line
1.5.6.4
#4 lore raw

PATCH 4/7 x86: fix section mismatch warning - apic_physflat

In reply to Marcin Slusarz

WARNING: vmlinux.o(.data+0xbe88): Section mismatch in reference from the variable apic_physflat to the function .init.text:physflat_acpi_madt_oem_check() The variable apic_physflat references
the function __init physflat_acpi_madt_oem_check()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

---
 arch/x86/kernel/genapic_flat_64.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/kernel/genapic_flat_64.c +1 -1
index 56d552c..59a732f 100644
@@ -170,7 +170,7 @@ struct genapic apic_flat =  {
  * We cannot use logical delivery in this case because the mask
  * overflows, so use physical mode.
  */
-static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 #ifdef CONFIG_ACPI
 	/*
Signature · 1 line
1.5.6.4
#5 lore raw

PATCH 5/7 x86: fix section mismatch warning - apic_x2apic_uv_x

In reply to Marcin Slusarz

WARNING: vmlinux.o(.data+0xbf08): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .init.text:uv_acpi_madt_oem_check() The variable apic_x2apic_uv_x references
the function __init uv_acpi_madt_oem_check()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

---
 arch/x86/kernel/genx2apic_uv_x.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/kernel/genx2apic_uv_x.c +1 -1
index ae2ffc8..b1369f4 100644
@@ -30,7 +30,7 @@ DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 static enum uv_system_type uv_system_type;
 
-static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
 		if (!strcmp(oem_table_id, "UVL"))
Signature · 1 line
1.5.6.4
#6 lore raw

PATCH 6/7 x86: fix section mismatch warning - apic_x2apic_cluster

In reply to Marcin Slusarz

WARNING: vmlinux.o(.data+0xbf88): Section mismatch in reference from the variable apic_x2apic_cluster to the function .init.text:x2apic_acpi_madt_oem_check() The variable apic_x2apic_cluster references
the function __init x2apic_acpi_madt_oem_check()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

---
 arch/x86/kernel/genx2apic_cluster.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/kernel/genx2apic_cluster.c +1 -1
index e4bf2cc..f6a2c8e 100644
@@ -12,7 +12,7 @@
 
 DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
 
-static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (cpu_has_x2apic)
 		return 1;
Signature · 1 line
1.5.6.4
#7 lore raw

PATCH 7/7 x86: fix section mismatch warning - apic_x2apic_phys

In reply to Marcin Slusarz

WARNING: vmlinux.o(.data+0xc008): Section mismatch in reference from the variable apic_x2apic_phys to the function .init.text:x2apic_acpi_madt_oem_check() The variable apic_x2apic_phys references
the function __init x2apic_acpi_madt_oem_check()
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

---
 arch/x86/kernel/genx2apic_phys.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/x86/kernel/genx2apic_phys.c +1 -1
index 8f1343d..d042211 100644
@@ -19,7 +19,7 @@ static int set_x2apic_phys_mode(char *arg)
 }
 early_param("x2apic_phys", set_x2apic_phys_mode);
 
-static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (cpu_has_x2apic && x2apic_phys)
 		return 1;
Signature · 1 line
1.5.6.4
Applied
#8 lore raw
In reply to Marcin Slusarz
Quoted 7 lines · Marcin Slusarz

[PATCH 1/7] x86, xsave: fix section mismatch warning - setup_xstate_init [PATCH 2/7] x86: fix section mismatch warning - reserve_region_with_split [PATCH 3/7] x86: fix section mismatch warning - apic_flat [PATCH 4/7] x86: fix section mismatch warning - apic_physflat [PATCH 5/7] x86: fix section mismatch warning - apic_x2apic_uv_x [PATCH 6/7] x86: fix section mismatch warning - apic_x2apic_cluster [PATCH 7/7] x86: fix section mismatch warning - apic_x2apic_phys

applied these to tip/x86/urgent:

3cfba08: x86: fix section mismatch warning - apic_x2apic_phys 2caa371: x86: fix section mismatch warning - apic_x2apic_cluster
f8827c0: x86: fix section mismatch warning - apic_x2apic_uv_x
fae1721: x86: fix section mismatch warning - apic_physflat 983f91f: x86: fix section mismatch warning - apic_flat

the warnings are harmless but worth fixing nevertheless.

Thanks Marcin!

Ingo