sharpsl-nand driver model hookup
Subsystems (5)
Hi,
Please have a look at the patches making sharpsl-nand more clean driver, correctly hooked in the driver model.
The following changes since commit 6bb7a935489dab20802dde6c2cb7d8582f4849bf:
Linus Torvalds (1):
Merge branch 'for-linus' of git://git.kernel.org/.../tiwai/sound-2.6
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lumag/tosa-2.6.git misc/mtd/sharpsl-nand
Dmitry Baryshkov (6):
[MTD] sharpsl_nand: switch to driver model usage. [MTD] sharpsl_nand: make drvdata non-static
[MTD] sharpsl_nand: move io addr to struct sharpsl_nand [MTD] sharpsl-nand: cleanup partitions support
[MTD] sharpsl-nand: use platform_data for model-specific values [MTD] sharpsl-nand: move registration to board code
arch/arm/mach-pxa/corgi.c | 54 ++++++++++ arch/arm/mach-pxa/poodle.c | 51 +++++++++ arch/arm/mach-pxa/spitz.c | 76 +++++++++++++ drivers/mtd/nand/sharpsl.c | 248 +++++++++++++++++++++---------------------- include/linux/mtd/sharpsl.h | 20 ++++ 5 files changed, 324 insertions(+), 125 deletions(-) create mode 100644 include/linux/mtd/sharpsl.h
Signature · 2 lines
With best wishes Dmitry
Quoted 4 lines · Dmitry Baryshkov
Hi,
Please have a look at the patches making sharpsl-nand more clean driver, correctly hooked in the driver model.
Unfortunately patches from this branch have been held by mailman.
Signature · 2 lines
With best wishes Dmitry
PATCH 1/6 sharpsl_nand: switch to driver model usage.
In reply to Dmitry BaryshkovStart cleanup of sharpsl_nand driver. Convert it to platform driver. Corresponding device is temprorary registered in sharpsl.c but will be later moved to corresponding board files.
--- drivers/mtd/nand/sharpsl.c | 63 +++++++++++++++++++++++++++++++++++++++----- 1 files changed, 56 insertions(+), 7 deletions(-)
drivers/mtd/nand/sharpsl.c +56 -7
@@ -20,12 +20,13 @@#include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> #include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/io.h> #include <mach/hardware.h> #include <asm/mach-types.h> static void __iomem *sharpsl_io_base; -static int sharpsl_phys_base =0x0C000000 ;/* register offset */ #define ECCLPLB sharpsl_io_base+0x00/* line parity 7 - 0 bit */
@@ -150,10 +151,11 @@ const char *part_probes[] = { "cmdlinepart", NULL };/* * Main initialization routine */ -static int __init sharpsl_nand_init (void ) +static int __devinit sharpsl_nand_probe (struct platform_device *pdev) {struct nand_chip *this;struct mtd_partition *sharpsl_partition_info; +struct resource *r;int err =0 ;/* Allocate memory for MTD device structure and private data */
@@ -163,8 +165,15 @@ static int __init sharpsl_nand_init(void)return -ENOMEM ; } + r =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!r) { +dev_err (&pdev->dev,"no io memory resource defined!\n" ); + err = -ENODEV ; + goto err_get_res; + } +/* map physical address */ - sharpsl_io_base =ioremap (sharpsl_phys_base,0x1000 ); + sharpsl_io_base =ioremap (r->start,resource_size (r));if (!sharpsl_io_base) {printk ("ioremap to access Sharp SL NAND chip failed\n" );kfree (sharpsl_mtd);
@@ -242,14 +251,16 @@ static int __init sharpsl_nand_init(void)/* Return happy */ return 0 ; -} -module_init (sharpsl_nand_init); +err_get_res: +kfree (sharpsl_mtd); +return err; +}/* * Clean up routine */ -static void __exit sharpsl_nand_cleanup(void) +static int __devexit sharpsl_nand_remove(struct platform_device *pdev) {/* Release resources, unregister device */ nand_release (sharpsl_mtd);
@@ -258,9 +269,47 @@ static void __exit sharpsl_nand_cleanup(void)/* Free the MTD device structure */ kfree (sharpsl_mtd); + +return 0 ; +} + +static struct platform_driver sharpsl_nand_driver = { + .driver = { + .name ="sharpsl-nand" , + .owner =THIS_MODULE , + }, + .probe = sharpsl_nand_probe, + .remove =__devexit_p (sharpsl_nand_remove), +}; + +static struct resource sharpsl_nand_resources[] = { + { + .start =0x0C000000 , + .end =0x0C000FFF , + .flags =IORESOURCE_MEM , + }, +}; + +static struct platform_device sharpsl_nand_device = { + .name ="sharpsl-nand" , + .id =-1 , + .resource = sharpsl_nand_resources, + .num_resources =ARRAY_SIZE (sharpsl_nand_resources), +}; + +static int __init sharpsl_nand_init (void ) +{ +platform_device_register (&sharpsl_nand_device); +return platform_driver_register (&sharpsl_nand_driver); } +module_init (sharpsl_nand_init); -module_exit (sharpsl_nand_cleanup); +static void __exit sharpsl_nand_exit(void) +{ +platform_driver_unregister (&sharpsl_nand_driver); +platform_device_unregister (&sharpsl_nand_device); +} +module_exit (sharpsl_nand_exit);MODULE_LICENSE ("GPL" );MODULE_AUTHOR ("Richard Purdie <[email protected]>" );
Signature · 1 line
1.5.6.5
PATCH 2/6 sharpsl_nand: make drvdata non-static
Merge mtd_info and nand_chip info special struct and make it drvdata instead of plain static variable.
--- drivers/mtd/nand/sharpsl.c | 53 ++++++++++++++++++++++++-------------------- 1 files changed, 29 insertions(+), 24 deletions(-)
drivers/mtd/nand/sharpsl.c +29 -24
@@ -26,6 +26,11 @@#include <mach/hardware.h> #include <asm/mach-types.h> +struct sharpsl_nand { +struct mtd_info mtd; +struct nand_chip chip; +}; +static void __iomem *sharpsl_io_base;/* register offset */
@@ -46,11 +51,6 @@ static void __iomem *sharpsl_io_base;#define FLCE0 (1 << 0)/* -* MTD structure for SharpSL -*/ -static struct mtd_info *sharpsl_mtd =NULL ; - -/* * Define partitions for flash device */ #define DEFAULT_NUM_PARTITIONS 3
@@ -157,10 +157,11 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)struct mtd_partition *sharpsl_partition_info;struct resource *r;int err =0 ; +struct sharpsl_nand *sharpsl;/* Allocate memory for MTD device structure and private data */ - sharpsl_mtd =kmalloc (sizeof (struct mtd_info ) +sizeof (struct nand_chip ),GFP_KERNEL ); -if (!sharpsl_mtd) { + sharpsl =kzalloc (sizeof (struct sharpsl_nand ),GFP_KERNEL ); +if (!sharpsl) {printk ("Unable to allocate SharpSL NAND MTD device structure.\n" );return -ENOMEM ; }
@@ -176,20 +177,18 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) sharpsl_io_base =ioremap (r->start,resource_size (r));if (!sharpsl_io_base) {printk ("ioremap to access Sharp SL NAND chip failed\n" ); -kfree (sharpsl_mtd); -return -EIO ; + err = -EIO ; + goto err_ioremap; }/* Get pointer to private data */ - this = (struct nand_chip *)(&sharpsl_mtd[1 ]); - -/* Initialize structures */ -memset (sharpsl_mtd,0 ,sizeof (struct mtd_info )); -memset (this,0 ,sizeof (struct nand_chip )); + this = (struct nand_chip *)(&sharpsl->chip);/* Link the private data with the MTD structure */ - sharpsl_mtd->priv = this; - sharpsl_mtd->owner =THIS_MODULE ; + sharpsl->mtd.priv = this; + sharpsl->mtd.owner =THIS_MODULE ; + +platform_set_drvdata (pdev, sharpsl);/* * PXA initialize
@@ -218,16 +217,17 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) this->ecc.correct = nand_correct_data;/* Scan to find existence of the device */ - err =nand_scan (sharpsl_mtd,1 ); + err =nand_scan (&sharpsl->mtd,1 );if (err) { +platform_set_drvdata (pdev,NULL );iounmap (sharpsl_io_base); -kfree (sharpsl_mtd); +kfree (sharpsl);return err; }/* Register the partitions */ - sharpsl_mtd->name ="sharpsl-nand" ; - nr_partitions =parse_mtd_partitions (sharpsl_mtd, part_probes, &sharpsl_partition_info,0 ); + sharpsl->mtd.name ="sharpsl-nand" ; + nr_partitions =parse_mtd_partitions (&sharpsl->mtd, part_probes, &sharpsl_partition_info,0 );if (nr_partitions <=0 ) { nr_partitions =DEFAULT_NUM_PARTITIONS ;
@@ -247,13 +247,14 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) } } -add_mtd_partitions (sharpsl_mtd, sharpsl_partition_info, nr_partitions); +add_mtd_partitions (&sharpsl->mtd, sharpsl_partition_info, nr_partitions);/* Return happy */ return 0 ; +err_ioremap: err_get_res: -kfree (sharpsl_mtd); +kfree (sharpsl);return err; }
@@ -262,13 +263,17 @@ err_get_res:*/ static int __devexit sharpsl_nand_remove(struct platform_device *pdev) { +struct sharpsl_nand *sharpsl =platform_get_drvdata (pdev); +/* Release resources, unregister device */ -nand_release (sharpsl_mtd); +nand_release (&sharpsl->mtd); + +platform_set_drvdata (pdev,NULL );iounmap (sharpsl_io_base);/* Free the MTD device structure */ -kfree (sharpsl_mtd); +kfree (sharpsl);return 0 ; }
Signature · 1 line
1.5.6.5
PATCH 3/6 sharpsl_nand: move io addr to struct sharpsl_nand
--- drivers/mtd/nand/sharpsl.c | 59 +++++++++++++++++++++++-------------------- 1 files changed, 32 insertions(+), 27 deletions(-)
drivers/mtd/nand/sharpsl.c +32 -27
@@ -29,18 +29,20 @@struct sharpsl_nand {struct mtd_info mtd;struct nand_chip chip; + +void __iomem *io; }; -static void __iomem *sharpsl_io_base; +#define mtd_to_sharpsl (_mtd) container_of(_mtd, struct sharpsl_nand, mtd)/* register offset */ -#define ECCLPLB sharpsl_io_base+0x00/* line parity 7 - 0 bit */ -#define ECCLPUB sharpsl_io_base+0x04/* line parity 15 - 8 bit */ -#define ECCCP sharpsl_io_base+0x08/* column parity 5 - 0 bit */ -#define ECCCNTR sharpsl_io_base+0x0C/* ECC byte counter */ -#define ECCCLRR sharpsl_io_base+0x10/* cleare ECC */ -#define FLASHIO sharpsl_io_base+0x14/* Flash I/O */ -#define FLASHCTL sharpsl_io_base+0x18/* Flash Control */ +#define ECCLPLB 0x00/* line parity 7 - 0 bit */ +#define ECCLPUB 0x04/* line parity 15 - 8 bit */ +#define ECCCP 0x08/* column parity 5 - 0 bit */ +#define ECCCNTR 0x0C/* ECC byte counter */ +#define ECCCLRR 0x10/* cleare ECC */ +#define FLASHIO 0x14/* Flash I/O */ +#define FLASHCTL 0x18/* Flash Control */ /* Flash control bit */ #define FLRYBY (1 << 5)
@@ -85,6 +87,7 @@ static struct mtd_partition sharpsl_nand_default_partition_info[] = {static void sharpsl_nand_hwcontrol (struct mtd_info *mtd,int cmd,unsigned int ctrl) { +struct sharpsl_nand *sharpsl =mtd_to_sharpsl (mtd);struct nand_chip *chip = mtd->priv;if (ctrl &NAND_CTRL_CHANGE ) {
@@ -94,7 +97,7 @@ static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd, bits ^=0x11 ; -writeb ((readb (FLASHCTL ) & ~0x17 ) | bits,FLASHCTL ); +writeb ((readb (sharpsl->io +FLASHCTL ) & ~0x17 ) | bits, sharpsl->io +FLASHCTL ); }if (cmd !=NAND_CMD_NONE )
@@ -128,20 +131,23 @@ static struct nand_ecclayout akita_oobinfo = {static int sharpsl_nand_dev_ready (struct mtd_info *mtd) { -return !((readb (FLASHCTL ) &FLRYBY ) ==0 ); +struct sharpsl_nand *sharpsl =mtd_to_sharpsl (mtd); +return !((readb (sharpsl->io +FLASHCTL ) &FLRYBY ) ==0 ); }static void sharpsl_nand_enable_hwecc (struct mtd_info *mtd,int mode) { -writeb (0 ,ECCCLRR ); +struct sharpsl_nand *sharpsl =mtd_to_sharpsl (mtd); +writeb (0 , sharpsl->io +ECCCLRR ); }static int sharpsl_nand_calculate_ecc (struct mtd_info *mtd,const u_char * dat,u_char * ecc_code) { - ecc_code[0 ] = ~readb (ECCLPUB ); - ecc_code[1 ] = ~readb (ECCLPLB ); - ecc_code[2 ] = (~readb (ECCCP ) <<2 ) |0x03 ; -return readb (ECCCNTR ) !=0 ; +struct sharpsl_nand *sharpsl =mtd_to_sharpsl (mtd); + ecc_code[0 ] = ~readb (sharpsl->io +ECCLPUB ); + ecc_code[1 ] = ~readb (sharpsl->io +ECCLPLB ); + ecc_code[2 ] = (~readb (sharpsl->io +ECCCP ) <<2 ) |0x03 ; +return readb (sharpsl->io +ECCCNTR ) !=0 ; }#ifdef CONFIG_MTD_PARTITIONS
@@ -174,8 +180,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) }/* map physical address */ - sharpsl_io_base =ioremap (r->start,resource_size (r)); -if (!sharpsl_io_base) { + sharpsl->io =ioremap (r->start,resource_size (r)); +if (!sharpsl->io) {printk ("ioremap to access Sharp SL NAND chip failed\n" ); err = -EIO ; goto err_ioremap;
@@ -193,11 +199,11 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)/* * PXA initialize */ -writeb (readb (FLASHCTL ) |FLWP ,FLASHCTL ); +writeb (readb (sharpsl->io +FLASHCTL ) |FLWP , sharpsl->io +FLASHCTL );/* Set address of NAND IO lines */ - this->IO_ADDR_R =FLASHIO ; - this->IO_ADDR_W =FLASHIO ; + this->IO_ADDR_R = sharpsl->io +FLASHIO ; + this->IO_ADDR_W = sharpsl->io +FLASHIO ;/* Set address of hardware control function */ this->cmd_ctrl = sharpsl_nand_hwcontrol; this->dev_ready = sharpsl_nand_dev_ready;
@@ -218,12 +224,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)/* Scan to find existence of the device */ err =nand_scan (&sharpsl->mtd,1 ); -if (err) { -platform_set_drvdata (pdev,NULL ); -iounmap (sharpsl_io_base); -kfree (sharpsl); -return err; - } +if (err) + goto err_scan;/* Register the partitions */ sharpsl->mtd.name ="sharpsl-nand" ;
@@ -252,6 +254,9 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)/* Return happy */ return 0 ; +err_scan: +platform_set_drvdata (pdev,NULL ); +iounmap (sharpsl->io); err_ioremap: err_get_res:kfree (sharpsl);
@@ -270,7 +275,7 @@ static int __devexit sharpsl_nand_remove(struct platform_device *pdev)platform_set_drvdata (pdev,NULL ); -iounmap (sharpsl_io_base); +iounmap (sharpsl->io);/* Free the MTD device structure */ kfree (sharpsl);
Signature · 1 line
1.5.6.5
PATCH 4/6 sharpsl-nand: cleanup partitions support
--- drivers/mtd/nand/sharpsl.c | 22 ++++++++++++++++++---- 1 files changed, 18 insertions(+), 4 deletions(-)
drivers/mtd/nand/sharpsl.c +18 -4
@@ -2,6 +2,7 @@* drivers/mtd/nand/sharpsl.c * * Copyright (C) 2004 Richard Purdie +* Copyright (C) 2008 Dmitry Baryshkov * * Based on Sharp's NAND driver sharp_sl.c *
@@ -52,12 +53,12 @@ struct sharpsl_nand {#define FLCLE (1 << 1)#define FLCE0 (1 << 0) +#ifdef CONFIG_MTD_PARTITIONS /* * Define partitions for flash device */ #define DEFAULT_NUM_PARTITIONS 3 -static int nr_partitions; static struct mtd_partition sharpsl_nand_default_partition_info[] = { { .name = "System Area",
@@ -75,6 +76,7 @@ static struct mtd_partition sharpsl_nand_default_partition_info[] = { .size = MTDPART_SIZ_FULL, }, }; +#endif /* * hardware specific access to control-lines
@@ -151,7 +153,7 @@ static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, }#ifdef CONFIG_MTD_PARTITIONS -const char *part_probes[] = {"cmdlinepart" ,NULL }; +static const char *part_probes[] = {"cmdlinepart" ,NULL };#endif /*
@@ -160,7 +162,10 @@ const char *part_probes[] = { "cmdlinepart", NULL };static int __devinit sharpsl_nand_probe (struct platform_device *pdev) {struct nand_chip *this; +#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *sharpsl_partition_info; +int nr_partitions; +#endif struct resource *r;int err =0 ;struct sharpsl_nand *sharpsl;
@@ -229,10 +234,11 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)/* Register the partitions */ sharpsl->mtd.name ="sharpsl-nand" ; +#ifdef CONFIG_MTD_PARTITIONS nr_partitions =parse_mtd_partitions (&sharpsl->mtd, part_probes, &sharpsl_partition_info,0 );if (nr_partitions <=0 ) { - nr_partitions =DEFAULT_NUM_PARTITIONS ; + nr_partitions =ARRAY_SIZE (sharpsl_nand_default_partition_info); sharpsl_partition_info = sharpsl_nand_default_partition_info;if (machine_is_poodle ()) { sharpsl_partition_info[1 ].size =22 *1024 *1024 ;
@@ -249,11 +255,19 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) } } -add_mtd_partitions (&sharpsl->mtd, sharpsl_partition_info, nr_partitions); + err =add_mtd_partitions (&sharpsl->mtd, sharpsl_partition_info, nr_partitions); +#else + err =add_mtd_device (&sharpsl->mtd); +#endif +if (err) + goto err_add;/* Return happy */ return 0 ; +err_add: +nand_release (&sharpsl->mtd); + err_scan:platform_set_drvdata (pdev,NULL );iounmap (sharpsl->io);
Signature · 1 line
1.5.6.5
PATCH 5/6 sharpsl-nand: use platform_data for model-specific values
Add platform_data which holds all model-specific values, like badblocks pattern, oobinfo, partitions.
--- drivers/mtd/nand/sharpsl.c | 158 +++++++++++++++++++++++-------------------- include/linux/mtd/sharpsl.h | 20 ++++++ 2 files changed, 104 insertions(+), 74 deletions(-) create mode 100644 include/linux/mtd/sharpsl.h
drivers/mtd/nand/sharpsl.c +84 -74
@@ -20,6 +20,7 @@#include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/sharpsl.h> #include <linux/interrupt.h> #include <linux/platform_device.h>
@@ -53,31 +54,6 @@ struct sharpsl_nand {#define FLCLE (1 << 1)#define FLCE0 (1 << 0) -#ifdef CONFIG_MTD_PARTITIONS -/* -* Define partitions for flash device -*/ -#define DEFAULT_NUM_PARTITIONS 3 - -static struct mtd_partition sharpsl_nand_default_partition_info[] = { - { - .name ="System Area" , - .offset =0 , - .size =7 *1024 *1024 , - }, - { - .name ="Root Filesystem" , - .offset =7 *1024 *1024 , - .size =30 *1024 *1024 , - }, - { - .name ="Home Filesystem" , - .offset =MTDPART_OFS_APPEND , - .size =MTDPART_SIZ_FULL , - }, -}; -#endif -/* * hardware specific access to control-lines * ctrl:
@@ -106,31 +82,6 @@ static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,writeb (cmd, chip->IO_ADDR_W); } -static uint8_t scan_ff_pattern[] = {0xff ,0xff }; - -static struct nand_bbt_descr sharpsl_bbt = { - .options =0 , - .offs =4 , - .len =2 , - .pattern = scan_ff_pattern -}; - -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options =0 , - .offs =4 , - .len =1 , - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes =24 , - .eccpos = { -0x5 ,0x1 ,0x2 ,0x3 ,0x6 ,0x7 ,0x15 ,0x11 , -0x12 ,0x13 ,0x16 ,0x17 ,0x25 ,0x21 ,0x22 ,0x23 , -0x26 ,0x27 ,0x35 ,0x31 ,0x32 ,0x33 ,0x36 ,0x37 }, - .oobfree = {{0x08 ,0x09 }} -}; -static int sharpsl_nand_dev_ready (struct mtd_info *mtd) {struct sharpsl_nand *sharpsl =mtd_to_sharpsl (mtd);
@@ -169,6 +120,12 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev)struct resource *r;int err =0 ;struct sharpsl_nand *sharpsl; +struct sharpsl_nand_platform_data *data = pdev->dev.platform_data; + +if (!data) { +dev_err (&pdev->dev,"no platform data!\n" ); +return -EINVAL ; + }/* Allocate memory for MTD device structure and private data */ sharpsl =kzalloc (sizeof (struct sharpsl_nand ),GFP_KERNEL );
@@ -218,11 +175,8 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) this->ecc.mode =NAND_ECC_HW ; this->ecc.size =256 ; this->ecc.bytes =3 ; - this->badblock_pattern = &sharpsl_bbt; -if (machine_is_akita () ||machine_is_borzoi ()) { - this->badblock_pattern = &sharpsl_akita_bbt; - this->ecc.layout = &akita_oobinfo; - } + this->badblock_pattern = data->badblock_pattern; + this->ecc.layout = data->ecc_layout; this->ecc.hwctl = sharpsl_nand_enable_hwecc; this->ecc.calculate = sharpsl_nand_calculate_ecc; this->ecc.correct = nand_correct_data;
@@ -236,29 +190,16 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) sharpsl->mtd.name ="sharpsl-nand" ;#ifdef CONFIG_MTD_PARTITIONS nr_partitions =parse_mtd_partitions (&sharpsl->mtd, part_probes, &sharpsl_partition_info,0 ); -if (nr_partitions <=0 ) { - nr_partitions =ARRAY_SIZE (sharpsl_nand_default_partition_info); - sharpsl_partition_info = sharpsl_nand_default_partition_info; -if (machine_is_poodle ()) { - sharpsl_partition_info[1 ].size =22 *1024 *1024 ; - }else if (machine_is_corgi () ||machine_is_shepherd ()) { - sharpsl_partition_info[1 ].size =25 *1024 *1024 ; - }else if (machine_is_husky ()) { - sharpsl_partition_info[1 ].size =53 *1024 *1024 ; - }else if (machine_is_spitz ()) { - sharpsl_partition_info[1 ].size =5 *1024 *1024 ; - }else if (machine_is_akita ()) { - sharpsl_partition_info[1 ].size =58 *1024 *1024 ; - }else if (machine_is_borzoi ()) { - sharpsl_partition_info[1 ].size =32 *1024 *1024 ; - } + nr_partitions = data->nr_partitions; + sharpsl_partition_info = data->partitions; } - err =add_mtd_partitions (&sharpsl->mtd, sharpsl_partition_info, nr_partitions); -#else - err =add_mtd_device (&sharpsl->mtd); +if (nr_partitions >0 ) + err =add_mtd_partitions (&sharpsl->mtd, sharpsl_partition_info, nr_partitions); + else#endif + err =add_mtd_device (&sharpsl->mtd);if (err) goto err_add;
@@ -306,6 +247,58 @@ static struct platform_driver sharpsl_nand_driver = { .remove = __devexit_p(sharpsl_nand_remove), }; +/* +* Define partitions for flash device +*/ +static struct mtd_partition sharpsl_nand_partitions[] = { + { + .name ="System Area" , + .offset =0 , + .size =7 *1024 *1024 , + }, + { + .name ="Root Filesystem" , + .offset =7 *1024 *1024 , + .size =30 *1024 *1024 , + }, + { + .name ="Home Filesystem" , + .offset =MTDPART_OFS_APPEND , + .size =MTDPART_SIZ_FULL , + }, +}; + +static uint8_t scan_ff_pattern[] = {0xff ,0xff }; + +static struct nand_bbt_descr sharpsl_bbt = { + .options =0 , + .offs =4 , + .len =2 , + .pattern = scan_ff_pattern +}; + +static struct nand_bbt_descr sharpsl_akita_bbt = { + .options =0 , + .offs =4 , + .len =1 , + .pattern = scan_ff_pattern +}; + +static struct nand_ecclayout akita_oobinfo = { + .eccbytes =24 , + .eccpos = { +0x5 ,0x1 ,0x2 ,0x3 ,0x6 ,0x7 ,0x15 ,0x11 , +0x12 ,0x13 ,0x16 ,0x17 ,0x25 ,0x21 ,0x22 ,0x23 , +0x26 ,0x27 ,0x35 ,0x31 ,0x32 ,0x33 ,0x36 ,0x37 }, + .oobfree = {{0x08 ,0x09 }} +}; + +static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { + .badblock_pattern = &sharpsl_bbt, + .partitions = sharpsl_nand_partitions, + .nr_partitions =ARRAY_SIZE (sharpsl_nand_partitions), +}; +static struct resource sharpsl_nand_resources[] = { { .start =0x0C000000 ,
@@ -319,10 +312,27 @@ static struct platform_device sharpsl_nand_device = { .id = -1, .resource = sharpsl_nand_resources, .num_resources = ARRAY_SIZE(sharpsl_nand_resources), + .dev.platform_data = &sharpsl_nand_platform_data, };static int __init sharpsl_nand_init (void ) { +if (machine_is_poodle ()) { + sharpsl_nand_partitions[1 ].size =22 *1024 *1024 ; + }else if (machine_is_corgi () ||machine_is_shepherd ()) { + sharpsl_nand_partitions[1 ].size =25 *1024 *1024 ; + }else if (machine_is_husky ()) { + sharpsl_nand_partitions[1 ].size =53 *1024 *1024 ; + }else if (machine_is_spitz ()) { + sharpsl_nand_partitions[1 ].size =5 *1024 *1024 ; + }else if (machine_is_akita ()) { + sharpsl_nand_partitions[1 ].size =58 *1024 *1024 ; + sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; + sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; + }else if (machine_is_borzoi ()) { + sharpsl_nand_partitions[1 ].size =32 *1024 *1024 ; + } +platform_device_register (&sharpsl_nand_device);return platform_driver_register (&sharpsl_nand_driver); }
include/linux/mtd/sharpsl.h new file +20 -0
@@ -0,0 +1,20 @@ +/* +* SharpSL NAND support +* +* Copyright (C) 2008 Dmitry Baryshkov +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/mtd/nand.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/mtd/partitions.h> + +struct sharpsl_nand_platform_data { +struct nand_bbt_descr *badblock_pattern; +struct nand_ecclayout *ecc_layout; +struct mtd_partition *partitions; +unsigned int nr_partitions; +};
Signature · 1 line
1.5.6.5
PATCH 6/6 sharpsl-nand: move registration to board code
Finally move registration of sharpsl-nand device to board-specific code. sharpsl nand driver is now clean and simple.
--- arch/arm/mach-pxa/corgi.c | 54 +++++++++++++++++++++++++++ arch/arm/mach-pxa/poodle.c | 51 ++++++++++++++++++++++++++ arch/arm/mach-pxa/spitz.c | 76 ++++++++++++++++++++++++++++++++++++++ drivers/mtd/nand/sharpsl.c | 87 +------------------------------------------- 4 files changed, 182 insertions(+), 86 deletions(-)
arch/arm/mach-pxa/corgi.c +54 -0
@@ -21,6 +21,7 @@#include <linux/mmc/host.h> #include <linux/pm.h> #include <linux/backlight.h> +#include <linux/mtd/sharpsl.h> #include <video/w100fb.h> #include <asm/setup.h>
@@ -483,6 +484,55 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { .gpio_pullup = CORGI_GPIO_USB_PULLUP, }; +static struct mtd_partition sharpsl_nand_partitions[] = { + { + .name ="System Area" , + .offset =0 , + .size =7 *1024 *1024 , + }, + { + .name ="Root Filesystem" , + .offset =7 *1024 *1024 , + .size =25 *1024 *1024 , + }, + { + .name ="Home Filesystem" , + .offset =MTDPART_OFS_APPEND , + .size =MTDPART_SIZ_FULL , + }, +}; + +static uint8_t scan_ff_pattern[] = {0xff ,0xff }; + +static struct nand_bbt_descr sharpsl_bbt = { + .options =0 , + .offs =4 , + .len =2 , + .pattern = scan_ff_pattern +}; + +static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { + .badblock_pattern = &sharpsl_bbt, + .partitions = sharpsl_nand_partitions, + .nr_partitions =ARRAY_SIZE (sharpsl_nand_partitions), +}; + +static struct resource sharpsl_nand_resources[] = { + { + .start =0x0C000000 , + .end =0x0C000FFF , + .flags =IORESOURCE_MEM , + }, +}; + +static struct platform_device sharpsl_nand_device = { + .name ="sharpsl-nand" , + .id =-1 , + .resource = sharpsl_nand_resources, + .num_resources =ARRAY_SIZE (sharpsl_nand_resources), + .dev.platform_data = &sharpsl_nand_platform_data, +}; +static struct platform_device *devices[]__initdata = { &corgiscoop_device,
@@ -492,6 +542,7 @@ static struct platform_device *devices[] __initdata = { &corgibl_device, &corgits_device, &corgiled_device, + &sharpsl_nand_device, };static void corgi_poweroff (void )
@@ -537,6 +588,9 @@ static void __init corgi_init(void) platform_scoop_config = &corgi_pcmcia_config; +if (machine_is_husky ()) + sharpsl_nand_partitions[1 ].size =53 *1024 *1024 ; +platform_add_devices (devices,ARRAY_SIZE (devices)); }
arch/arm/mach-pxa/poodle.c +51 -0
68 lines not on this page · raw message
arch/arm/mach-pxa/spitz.c +76 -0
104 lines not on this page · raw message
drivers/mtd/nand/sharpsl.c +1 -86
104 lines not on this page · raw message
Signature · 1 line
1.5.6.5
Eric Miao
Acked-byHi Dmitry,
Sorry for late reply, I had nearly ignored this patch set. All 6 patches look good to me (I was long hoping someone can get this cleaned up). With the remaining board patches in your branch, poodle/corgi/spitz all boot up without problems. So all
David,
Could you help to merge this patch series into the mtd tree?
Thanks very much!
Quoted 38 lines · Dmitry Baryshkov
Hi,
Please have a look at the patches making sharpsl-nand more clean driver, correctly hooked in the driver model.
The following changes since commit
6bb7a935489dab20802dde6c2cb7d8582f4849bf:
Linus Torvalds (1):Merge branch 'for-linus' of git://git.kernel.org/.../tiwai/sound-2.6are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lumag/tosa-2.6.gitmisc/mtd/sharpsl-nandDmitry Baryshkov (6):
[MTD]sharpsl_nand: switch to driver model usage. [MTD]sharpsl_nand: make drvdata non-static
[MTD]sharpsl_nand: move io addr to structsharpsl_nand[MTD] sharpsl-nand: cleanup partitions support
[MTD] sharpsl-nand: useplatform_datafor model-specific values [MTD] sharpsl-nand: move registration to board codearch/arm/mach-pxa/corgi.c | 54 ++++++++++ arch/arm/mach-pxa/poodle.c | 51 +++++++++ arch/arm/mach-pxa/spitz.c | 76 +++++++++++++ drivers/mtd/nand/sharpsl.c | 248 +++++++++++++++++++++---------------------- include/linux/mtd/sharpsl.h | 20 ++++ 5 files changed, 324 insertions(+), 125 deletions(-) create mode 100644 include/linux/mtd/sharpsl.h--
With best wishes
Dmitry______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
Signature · 2 lines
Cheers - eric
Hi,
2008/11/25 Eric Miao <[email protected]>:
Quoted 7 lines
Hi Dmitry,
Sorry for late reply, I had nearly ignored this patch set. All 6 patches look good to me (I was long hoping someone can get this cleaned up). With the remaining board patches in your branch, poodle/corgi/spitz all boot up without problems. So all
Quoted 5 lines
Acked-by Eric Miao <[email protected]>David,
Could you help to merge this patch series into the mtd tree?
I still don't see this serie merged. David, are there any objections from your side,
will it be merged later, or did you just miss this patchserie? Thank you.
Quoted 49 lines
Thanks very much!
Quoted 29 lines · Dmitry Baryshkov
Hi,
Please have a look at the patches making sharpsl-nand more clean driver, correctly hooked in the driver model.
The following changes since commit
6bb7a935489dab20802dde6c2cb7d8582f4849bf:
Linus Torvalds (1):Merge branch 'for-linus' of git://git.kernel.org/.../tiwai/sound-2.6are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lumag/tosa-2.6.gitmisc/mtd/sharpsl-nandDmitry Baryshkov (6):
[MTD]sharpsl_nand: switch to driver model usage. [MTD]sharpsl_nand: make drvdata non-static
[MTD]sharpsl_nand: move io addr to structsharpsl_nand[MTD] sharpsl-nand: cleanup partitions support
[MTD] sharpsl-nand: useplatform_datafor model-specific values [MTD] sharpsl-nand: move registration to board codearch/arm/mach-pxa/corgi.c | 54 ++++++++++ arch/arm/mach-pxa/poodle.c | 51 +++++++++ arch/arm/mach-pxa/spitz.c | 76 +++++++++++++ drivers/mtd/nand/sharpsl.c | 248 +++++++++++++++++++++---------------------- include/linux/mtd/sharpsl.h | 20 ++++ 5 files changed, 324 insertions(+), 125 deletions(-) create mode 100644 include/linux/mtd/sharpsl.hQuoted 9 lines
--
With best wishes
Dmitry______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/--
Cheers
- eric
Signature · 2 lines
With best wishes Dmitry
Quoted 5 lines · Dmitry
I still don't see this serie merged. David, are there any objections from your side,
will it be merged later, or did you just miss this patchserie? Thank you.
It's merged now. I had some other things to go to Linus before 2.6.28, and now I'm collecting bits for 2.6.29. Thanks.
Signature · 2 lines
David Woodhouse Open Source Technology Centre [email protected] Intel Corporation
2008/12/10 David Woodhouse <[email protected]>:
Quoted 9 lines · Dmitry
Quoted 5 lines
I still don't see this serie merged. David, are there any objections from your side,
will it be merged later, or did you just miss this patchserie? Thank you.It's merged now. I had some other things to go to Linus before 2.6.28, and now I'm collecting bits for 2.6.29. Thanks.
Thank you.
Signature · 2 lines
With best wishes Dmitry