mfd: Don't mark WM8350 security register as volatile
Subsystems (2)
PATCH 1/2 mfd: Don't mark WM8350 security register as volatile
There's no need to read this back from the chip each time.
Signed-off-by Mark Brown <[email protected]>
--- drivers/mfd/wm8350-regmap.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/mfd/wm8350-regmap.c +1 -1
@@ -1307,7 +1307,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = { { 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */ { 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */ { 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */ - { 0xFFFF, 0xFFFF, 0xFFFF }, /* R219 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */ { 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */ { 0x0000, 0x0000, 0x0000 }, /* R221 */ { 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
Signature · 1 line
1.5.6.5
PATCH 2/2 mfd: Make WM8400 depend on I2C until SPI is submitted
Otherwise we could build in WM8400 but not I2C.
Signed-off-by Mark Brown <[email protected]>
--- drivers/mfd/Kconfig | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/mfd/Kconfig +1 -0
@@ -105,6 +105,7 @@ config MFD_TC6393XB config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" + depends on I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio CODEC. This driver adds provides common support for accessing
Signature · 1 line
1.5.6.5