sh: ap325rxa: Moveed ap325rxa board in board/renesas
Subsystems (2)
PATCH 1/7 sh: ap325rxa: Moveed ap325rxa board in board/renesas
--- Makefile | 2 +- board/ap325rxa/Makefile | 51 ------- board/ap325rxa/ap325rxa.c | 162 --------------------- board/ap325rxa/config.mk | 26 ---- board/ap325rxa/cpld-ap325rxa.c | 206 --------------------------- board/ap325rxa/lowlevel_init.S | 243 -------------------------------- board/ap325rxa/u-boot.lds | 105 -------------- board/renesas/ap325rxa/Makefile | 51 +++++++ board/renesas/ap325rxa/ap325rxa.c | 162 +++++++++++++++++++++ board/renesas/ap325rxa/config.mk | 26 ++++ board/renesas/ap325rxa/cpld-ap325rxa.c | 206 +++++++++++++++++++++++++++ board/renesas/ap325rxa/lowlevel_init.S | 243 ++++++++++++++++++++++++++++++++ board/renesas/ap325rxa/u-boot.lds | 105 ++++++++++++++ 13 files changed, 794 insertions(+), 794 deletions(-) delete mode 100644 board/ap325rxa/Makefile delete mode 100644 board/ap325rxa/ap325rxa.c delete mode 100644 board/ap325rxa/config.mk delete mode 100644 board/ap325rxa/cpld-ap325rxa.c delete mode 100644 board/ap325rxa/lowlevel_init.S delete mode 100644 board/ap325rxa/u-boot.lds create mode 100644 board/renesas/ap325rxa/Makefile create mode 100644 board/renesas/ap325rxa/ap325rxa.c create mode 100644 board/renesas/ap325rxa/config.mk create mode 100644 board/renesas/ap325rxa/cpld-ap325rxa.c create mode 100644 board/renesas/ap325rxa/lowlevel_init.S create mode 100644 board/renesas/ap325rxa/u-boot.lds
Makefile +1 -1
@@ -3145,7 +3145,7 @@ sh7785lcr_config : unconfig ap325rxa_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h - @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa + @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas #======================================================================== # SPARC
board/ap325rxa/Makefile deleted +0 -51
51 lines not on this page · raw message
board/ap325rxa/ap325rxa.c deleted +0 -162
162 lines not on this page · raw message
board/ap325rxa/config.mk deleted +0 -26
@@ -1,26 +0,0 @@ -# -# Copyright (C) 2007 -# Nobuhiro Iwamatsu <[email protected]> -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA - -# -# TEXT_BASE refers to image _after_ relocation. -# -# NOTE: Must match value used in u-boot.lds (in this directory). -# - -TEXT_BASE = 0x8FFC0000
board/ap325rxa/cpld-ap325rxa.c deleted +0 -206
206 lines not on this page · raw message
board/ap325rxa/lowlevel_init.S deleted +0 -243
243 lines not on this page · raw message
board/ap325rxa/u-boot.lds deleted +0 -105
105 lines not on this page · raw message
board/renesas/ap325rxa/Makefile new file +51 -0
51 lines not on this page · raw message
board/renesas/ap325rxa/ap325rxa.c new file +162 -0
162 lines not on this page · raw message
board/renesas/ap325rxa/config.mk new file +26 -0
@@ -0,0 +1,26 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <[email protected]> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000
board/renesas/ap325rxa/cpld-ap325rxa.c new file +206 -0
206 lines not on this page · raw message
board/renesas/ap325rxa/lowlevel_init.S new file +243 -0
243 lines not on this page · raw message
board/renesas/ap325rxa/u-boot.lds new file +105 -0
105 lines not on this page · raw message
Signature · 1 line
1.5.6.5
PATCH 1/7 sh: ap325rxa: Moveed ap325rxa board in board/renesas
Hi Nobuhiro,
The titles for this patch series should be renamed with s/Moveed/Moved/ and maybe s/in/to/.
Also, git should be smart enough to know the files were moved as opposed to separate file deletions/creations. For example from "[PATCH 01/12]
gunzip: move to lib_generic":
---
common/Makefile | 1 -
lib_generic/Makefile | 1 +
{common => lib_generic}/gunzip.c | 0
3 files changed, 1 insertions(+), 1 deletions(-)
rename {common => lib_generic}/gunzip.c (100%)common/Makefile +0 -1
@@ -36,7 +36,6 @@ COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o COBJS-y += image.o -COBJS-y += gunzip.o COBJS-y += cmd_boot.o COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o COBJS-y += cmd_bootm.o
lib_generic/Makefile +1 -0
@@ -34,6 +34,7 @@ COBJS-y += crc32.o COBJS-y += ctype.o COBJS-y += display_options.o COBJS-y += div64.o +COBJS-y += gunzip.o COBJS-y += lmb.o COBJS-y += ldiv.o COBJS-$(CONFIG_MD5) += md5.o
lib_generic/gunzip.c renamed from common/gunzip.c +0 -0
Maybe you have to explicitly use the "git mv" command, I'm not sure... Without git noticing the files were only moved I'm doubtful the moved files would retain their history log and only having the relevant file changes in the diff would clean up the patches significantly.
Best,
Peter
Quoted 28 lines · Nobuhiro Iwamatsu
Signed-off-by Nobuhiro Iwamatsu <[email protected]>--- Makefile | 2 +- board/ap325rxa/Makefile | 51 ------- board/ap325rxa/ap325rxa.c | 162 --------------------- board/ap325rxa/config.mk | 26 ---- board/ap325rxa/cpld-ap325rxa.c | 206 --------------------------- board/ap325rxa/lowlevel_init.S | 243 -------------------------------- board/ap325rxa/u-boot.lds | 105 -------------- board/renesas/ap325rxa/Makefile | 51 +++++++ board/renesas/ap325rxa/ap325rxa.c | 162 +++++++++++++++++++++ board/renesas/ap325rxa/config.mk | 26 ++++ board/renesas/ap325rxa/cpld-ap325rxa.c | 206 +++++++++++++++++++++++++++ board/renesas/ap325rxa/lowlevel_init.S | 243 ++++++++++++++++++++++++++++++++ board/renesas/ap325rxa/u-boot.lds | 105 ++++++++++++++ 13 files changed, 794 insertions(+), 794 deletions(-) delete mode 100644 board/ap325rxa/Makefile delete mode 100644 board/ap325rxa/ap325rxa.c delete mode 100644 board/ap325rxa/config.mk delete mode 100644 board/ap325rxa/cpld-ap325rxa.c delete mode 100644 board/ap325rxa/lowlevel_init.S delete mode 100644 board/ap325rxa/u-boot.lds create mode 100644 board/renesas/ap325rxa/Makefile create mode 100644 board/renesas/ap325rxa/ap325rxa.c create mode 100644 board/renesas/ap325rxa/config.mk create mode 100644 board/renesas/ap325rxa/cpld-ap325rxa.c create mode 100644 board/renesas/ap325rxa/lowlevel_init.S create mode 100644 board/renesas/ap325rxa/u-boot.lds
PATCH 1/7 sh: ap325rxa: Moveed ap325rxa board in board/renesas
Hi, Peter.
Quoted 3 lines · On Tue, 28 Oct 2008 09:36:10 -0500 Peter Tyser <[email protected]> wrote:
Hi Nobuhiro,
The titles for this patch series should be renamed with s/Moveed/Moved/ and maybe s/in/to/.
Oh, Thanks.
Quoted 43 lines
Also, git should be smart enough to know the files were moved as opposed to separate file deletions/creations. For example from "[PATCH 01/12]
gunzip: move tolib_generic":Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- common/Makefile | 1 - lib_generic/Makefile | 1 + {common => lib_generic}/gunzip.c | 0 3 files changed, 1 insertions(+), 1 deletions(-) rename {common => lib_generic}/gunzip.c (100%)common/Makefile +0
-1@@ -36,7 +36,6 @@ COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o COBJS-y += image.o -COBJS-y += gunzip.o COBJS-y += cmd_boot.o COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o COBJS-y += cmd_bootm.olib_generic/Makefile +1
-0@@ -34,6 +34,7 @@ COBJS-y += crc32.o COBJS-y += ctype.o COBJS-y += display_options.o COBJS-y += div64.o +COBJS-y += gunzip.o COBJS-y += lmb.o COBJS-y += ldiv.o COBJS-$(CONFIG_MD5) += md5.olib_generic/gunzip.c renamed from common/gunzip.c +0
-0
Quoted 4 lines
Maybe you have to explicitly use the "git mv" command, I'm not sure... Without git noticing the files were only moved I'm doubtful the moved files would retain their history log and only having the relevant file changes in the diff would clean up the patches significantly.
OK, I will check and resend.
Thnak you for your check.
Best regards,
Nobuhiro
Signature · 1 line
Nobuhiro Iwamatsu
PATCH 1/7 sh: ap325rxa: Moveed ap325rxa board in board/renesas
Hi Nobuhiro,
Quoted 62 lines · Nobuhiro Iwamatsu
Hi, Peter.
Quoted 4 lines · On Tue, 28 Oct 2008 09:36:10 -0500 Peter Tyser <[email protected]> wrote:
Hi Nobuhiro,
The titles for this patch series should be renamed with s/Moveed/Moved/ and maybe s/in/to/.Oh, Thanks.
Quoted 42 lines
Also, git should be smart enough to know the files were moved as opposed to separate file deletions/creations. For example from "[PATCH 01/12]
gunzip: move tolib_generic":Signed-off-by Jean-Christophe PLAGNIOL-VILLARD <[email protected]>--- common/Makefile | 1 - lib_generic/Makefile | 1 + {common => lib_generic}/gunzip.c | 0 3 files changed, 1 insertions(+), 1 deletions(-) rename {common => lib_generic}/gunzip.c (100%)common/Makefile +0
-1@@ -36,7 +36,6 @@ COBJS-$(CONFIG_CMD_BDI) += cmd_bdinfo.o COBJS-$(CONFIG_CMD_BEDBUG) += cmd_bedbug.o COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o COBJS-y += image.o -COBJS-y += gunzip.o COBJS-y += cmd_boot.o COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o COBJS-y += cmd_bootm.olib_generic/Makefile +1
-0@@ -34,6 +34,7 @@ COBJS-y += crc32.o COBJS-y += ctype.o COBJS-y += display_options.o COBJS-y += div64.o +COBJS-y += gunzip.o COBJS-y += lmb.o COBJS-y += ldiv.o COBJS-$(CONFIG_MD5) += md5.olib_generic/gunzip.c renamed from common/gunzip.c +0
-0Quoted 5 lines
Maybe you have to explicitly use the "git mv" command, I'm not sure... Without git noticing the files were only moved I'm doubtful the moved files would retain their history log and only having the relevant file changes in the diff would clean up the patches significantly.
OK, I will check and resend.
Quoted 5 lines
Thnak you for your check.
Best regards,
Nobuhiro
Use 'git mv' and then 'git format-patch -C'
regards,
Ben
PATCH 1/7 sh: ap325rxa: Moveed ap325rxa board in board/renesas
Hi, Ben.
Quoted 1 line · On Tue, 28 Oct 2008 09:35:09 -0700 Ben Warren <[email protected]> wrote:
Use 'git mv' and then 'git format-patch -C'
OK, Thank you.
I will use and resend.
Best regards,
Nobuhiro
Signature · 1 line
Nobuhiro Iwamatsu