Skip to contentSkip to conversation

ieee1394: struct device - replace bus_id with dev_name(), dev_set_name()

PATCH Kay Sievers 2 participants 2 messages Oct 30, 2008 – Oct 31, 2008

lore
Share & tools
lore
#0 lore raw

This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation.

Thanks,
Kay

From: Kay Sievers <[email protected]>

Subject: ieee1394: struct device - replace bus_id with dev_name(), dev_set_name()

CC Stefan Richter <[email protected]>

---

drivers/ieee1394/hosts.c +2 -2
index 8dd09d8..237d0c9 100644
@@ -155,11 +155,11 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
 	memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device));
 	h->device.parent = dev;
 	set_dev_node(&h->device, dev_to_node(dev));
-	snprintf(h->device.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
+	dev_set_name(&h->device, "fw-host%d", h->id);
 
 	h->host_dev.parent = &h->device;
 	h->host_dev.class = &hpsb_host_class;
-	snprintf(h->host_dev.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
+	dev_set_name(&h->host_dev, "fw-host%d", h->id);
 
 	if (device_register(&h->device))
 		goto fail;
drivers/ieee1394/nodemgr.c +5 -9
index 2376b72..9e39f73 100644
@@ -826,13 +826,11 @@ static struct node_entry *nodemgr_create_node(octlet_t guid,
 	memcpy(&ne->device, &nodemgr_dev_template_ne,
 	       sizeof(ne->device));
 	ne->device.parent = &host->device;
-	snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx",
-		 (unsigned long long)(ne->guid));
+	dev_set_name(&ne->device, "%016Lx", (unsigned long long)(ne->guid));
 
 	ne->node_dev.parent = &ne->device;
 	ne->node_dev.class = &nodemgr_ne_class;
-	snprintf(ne->node_dev.bus_id, BUS_ID_SIZE, "%016Lx",
-		(unsigned long long)(ne->guid));
+	dev_set_name(&ne->node_dev, "%016Lx", (unsigned long long)(ne->guid));
 
 	if (device_register(&ne->device))
 		goto fail_devreg;
@@ -932,13 +930,11 @@ static void nodemgr_register_device(struct node_entry *ne,
 
 	ud->device.parent = parent;
 
-	snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u",
-		 ne->device.bus_id, ud->id);
+	dev_set_name(&ud->device, "%s-%u", dev_name(&ne->device), ud->id);
 
 	ud->unit_dev.parent = &ud->device;
 	ud->unit_dev.class = &nodemgr_ud_class;
-	snprintf(ud->unit_dev.bus_id, BUS_ID_SIZE, "%s-%u",
-		 ne->device.bus_id, ud->id);
+	dev_set_name(&ud->unit_dev, "%s-%u", dev_name(&ne->device), ud->id);
 
 	if (device_register(&ud->device))
 		goto fail_devreg;
@@ -953,7 +949,7 @@ static void nodemgr_register_device(struct node_entry *ne,
 fail_classdevreg:
 	device_unregister(&ud->device);
 fail_devreg:
-	HPSB_ERR("Failed to create unit %s", ud->device.bus_id);
+	HPSB_ERR("Failed to create unit %s", dev_name(&ud->device));
 }	
 
 
#1 lore raw
Quoted 25 lines · Kay Sievers

This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation.

Thanks,
Kay

Quoted 7 lines

From: Kay Sievers <[email protected]>

Subject: ieee1394: struct device - replace bus_id with dev_name(), dev_set_name()

CC Stefan Richter <[email protected]>

---

Committed to linux1394-2.6.git. Thanks.

Quoted 66 lines
drivers/ieee1394/hosts.c +2 -2
index 8dd09d8..237d0c9 100644
@@ -155,11 +155,11 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
 	memcpy(&h->device, &nodemgr_dev_template_host, sizeof(h->device));
 	h->device.parent = dev;
 	set_dev_node(&h->device, dev_to_node(dev));
-	snprintf(h->device.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
+	dev_set_name(&h->device, "fw-host%d", h->id);
 
 	h->host_dev.parent = &h->device;
 	h->host_dev.class = &hpsb_host_class;
-	snprintf(h->host_dev.bus_id, BUS_ID_SIZE, "fw-host%d", h->id);
+	dev_set_name(&h->host_dev, "fw-host%d", h->id);
 
 	if (device_register(&h->device))
 		goto fail;
drivers/ieee1394/nodemgr.c +5 -9
index 2376b72..9e39f73 100644
@@ -826,13 +826,11 @@ static struct node_entry *nodemgr_create_node(octlet_t guid,
 	memcpy(&ne->device, &nodemgr_dev_template_ne,
 	       sizeof(ne->device));
 	ne->device.parent = &host->device;
-	snprintf(ne->device.bus_id, BUS_ID_SIZE, "%016Lx",
-		 (unsigned long long)(ne->guid));
+	dev_set_name(&ne->device, "%016Lx", (unsigned long long)(ne->guid));
 
 	ne->node_dev.parent = &ne->device;
 	ne->node_dev.class = &nodemgr_ne_class;
-	snprintf(ne->node_dev.bus_id, BUS_ID_SIZE, "%016Lx",
-		(unsigned long long)(ne->guid));
+	dev_set_name(&ne->node_dev, "%016Lx", (unsigned long long)(ne->guid));
 
 	if (device_register(&ne->device))
 		goto fail_devreg;
@@ -932,13 +930,11 @@ static void nodemgr_register_device(struct node_entry *ne,
 
 	ud->device.parent = parent;
 
-	snprintf(ud->device.bus_id, BUS_ID_SIZE, "%s-%u",
-		 ne->device.bus_id, ud->id);
+	dev_set_name(&ud->device, "%s-%u", dev_name(&ne->device), ud->id);
 
 	ud->unit_dev.parent = &ud->device;
 	ud->unit_dev.class = &nodemgr_ud_class;
-	snprintf(ud->unit_dev.bus_id, BUS_ID_SIZE, "%s-%u",
-		 ne->device.bus_id, ud->id);
+	dev_set_name(&ud->unit_dev, "%s-%u", dev_name(&ne->device), ud->id);
 
 	if (device_register(&ud->device))
 		goto fail_devreg;
@@ -953,7 +949,7 @@ static void nodemgr_register_device(struct node_entry *ne,
 fail_classdevreg:
 	device_unregister(&ud->device);
 fail_devreg:
-	HPSB_ERR("Failed to create unit %s", ud->device.bus_id);
+	HPSB_ERR("Failed to create unit %s", dev_name(&ud->device));
 }	
 
 
Signature · 3 lines
Stefan Richter
-=====-==--- =-=- =====
http://arcgraph.de/sr/