tg3: Refine power management and WOL code
Subsystems (2)
PATCH 8/15 tg3: Refine power management and WOL code
Commit 12dac0756d357325b107fe6ec24921ec38661839 introduced the new PCI PM API to the tg3 driver. The patch was understandably conservative, so this patch elaborates on that work.
The patch starts by creating a single point in tg3_set_power_state() to decide whether or not to enable WOL. The rest of the code in tg3_set_power_state() was then pivoted to use the result of this decision.
The patch then makes sure the device is allowed to wakeup before reporting whether or not WOL is currently enabled. The final hunks of the patch consolidate where the WOL capability and WOL enabled flags are set to a single location.
--- drivers/net/tg3.c | 40 +++++++++++++++++++++++----------------- 1 files changed, 23 insertions(+), 17 deletions(-)
drivers/net/tg3.c +23 -17
@@ -2052,6 +2052,7 @@ static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)static int tg3_set_power_state (struct tg3 *tp,pci_power_t state) {u32 misc_host_ctrl; +bool device_should_wake;/* Make sure register accesses (indirect or otherwise) * will function correctly.
@@ -2085,6 +2086,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)tw32 (TG3PCI_MISC_HOST_CTRL , misc_host_ctrl |MISC_HOST_CTRL_MASK_PCI_INT ); + device_should_wake =pci_pme_capable (tp->pdev, state) && +device_may_wakeup (&tp->pdev->dev) && + (tp->tg3_flags &TG3_FLAG_WOL_ENABLE ); +if (tp->tg3_flags3 &TG3_FLG3_USE_PHYLIB ) {if ((tp->tg3_flags3 &TG3_FLG3_PHY_CONNECTED ) && !tp->link_config.phy_is_low_power) {
@@ -2106,7 +2111,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)ADVERTISED_10baseT_Half ;if ((tp->tg3_flags &TG3_FLAG_ENABLE_ASF ) || - (tp->tg3_flags &TG3_FLAG_WOL_ENABLE )) { + device_should_wake) {if (tp->tg3_flags &TG3_FLAG_WOL_SPEED_100MB ) advertising |= ADVERTISED_100baseT_Half |
@@ -2160,7 +2165,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)WOL_DRV_WOL | WOL_SET_MAGIC_PKT); -if (tp->tg3_flags &TG3_FLAG_WOL_ENABLE ) { +if (device_should_wake) {u32 mac_mode;if (!(tp->tg3_flags2 &TG3_FLG2_PHY_SERDES )) {
@@ -2192,15 +2197,12 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)if (!(tp->tg3_flags2 &TG3_FLG2_5750_PLUS ))tw32 (MAC_LED_CTRL , tp->led_ctrl); -if (pci_pme_capable (tp->pdev, state) && - (tp->tg3_flags &TG3_FLAG_WOL_ENABLE )) { - mac_mode |=MAC_MODE_MAGIC_PKT_ENABLE ; -if (((tp->tg3_flags2 &TG3_FLG2_5705_PLUS ) && - !(tp->tg3_flags2 &TG3_FLG2_5780_CLASS )) && - ((tp->tg3_flags &TG3_FLAG_ENABLE_ASF ) || - (tp->tg3_flags3 &TG3_FLG3_ENABLE_APE ))) - mac_mode |=MAC_MODE_KEEP_FRAME_IN_WOL ; - } + mac_mode |=MAC_MODE_MAGIC_PKT_ENABLE ; +if (((tp->tg3_flags2 &TG3_FLG2_5705_PLUS ) && + !(tp->tg3_flags2 &TG3_FLG2_5780_CLASS )) && + ((tp->tg3_flags &TG3_FLAG_ENABLE_ASF ) || + (tp->tg3_flags3 &TG3_FLG3_ENABLE_APE ))) + mac_mode |=MAC_MODE_KEEP_FRAME_IN_WOL ;if (tp->tg3_flags3 &TG3_FLG3_ENABLE_APE ) { mac_mode |= tp->mac_mode &
@@ -2272,7 +2274,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) } } -if (!(tp->tg3_flags &TG3_FLAG_WOL_ENABLE ) && +if (!(device_should_wake) && !(tp->tg3_flags &TG3_FLAG_ENABLE_ASF ) && !(tp->tg3_flags3 &TG3_FLG3_ENABLE_APE ))tg3_power_down_phy (tp);
@@ -2298,7 +2300,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)tg3_write_sig_post_reset (tp,RESET_KIND_SHUTDOWN ); -if (tp->tg3_flags &TG3_FLAG_WOL_ENABLE ) +if (device_should_wake)pci_enable_wake (tp->pdev, state, true);/* Finally, set the new power state. */
@@ -9082,7 +9084,8 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)else wol->supported =0 ; wol->wolopts =0 ; -if (tp->tg3_flags &TG3_FLAG_WOL_ENABLE ) +if ((tp->tg3_flags &TG3_FLAG_WOL_ENABLE ) && +device_can_wakeup (&tp->pdev->dev)) wol->wolopts =WAKE_MAGIC ;memset (&wol->sopass,0 ,sizeof (wol->sopass)); }
@@ -11315,7 +11318,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) (val &VCPU_CFGSHDW_WOL_MAGPKT ) && device_may_wakeup(&tp->pdev->dev)) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; -return ; + goto done; }tg3_read_mem (tp,NIC_SRAM_DATA_SIG , &val);
@@ -11447,8 +11450,7 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) tp->tg3_flags &= ~TG3_FLAG_WOL_CAP ;if ((tp->tg3_flags &TG3_FLAG_WOL_CAP ) && - (nic_cfg &NIC_SRAM_DATA_CFG_WOL_ENABLE ) && -device_may_wakeup (&tp->pdev->dev)) + (nic_cfg &NIC_SRAM_DATA_CFG_WOL_ENABLE )) tp->tg3_flags |=TG3_FLAG_WOL_ENABLE ;if (cfg2 & (1 <<17 ))
@@ -11474,6 +11476,10 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)if (cfg4 &NIC_SRAM_RGMII_EXT_IBND_TX_EN ) tp->tg3_flags3 |=TG3_FLG3_RGMII_EXT_IBND_TX_EN ; } +done: +device_init_wakeup (&tp->pdev->dev, tp->tg3_flags &TG3_FLAG_WOL_CAP ); +device_set_wakeup_enable (&tp->pdev->dev, + tp->tg3_flags &TG3_FLAG_WOL_ENABLE ); }static int __devinit tg3_issue_otp_command (struct tg3 *tp,u32 cmd)
Signature · 1 line
1.5.6.4
From: "Matt Carlson" <[email protected]>
Date: Mon, 3 Nov 2008 02:13:10 -0800
Quoted 9 lines
Commit
12dac0756d357325b107fe6ec24921ec38661839introduced the new PCI PM API to the tg3 driver. The patch was understandably conservative, so this patch elaborates on that work.The patch starts by creating a single point in
tg3_set_power_state()to decide whether or not to enable WOL. The rest of the code intg3_set_power_state()was then pivoted to use the result of this decision.
Quoted 7 lines
The patch then makes sure the device is allowed to wakeup before reporting whether or not WOL is currently enabled. The final hunks of the patch consolidate where the WOL capability and WOL enabled flags are set to a single location.
Signed-off-by Matt Carlson <[email protected]>Signed-off-by Michael Chan <[email protected]>
Applied.