Skip to contentSkip to conversation

broadcom: Add flow control support

PATCH Applied Matt Carlson 2 participants 2 messages Nov 3, 2008 – Nov 4, 2008

Subsystems (4)
Networking Network drivers Ethernet PHY Broadcom Ethernet PHY drivers
lore
Share & tools
lore

Matt Carlson

author
#0 lore raw

PATCH 12/15 broadcom: Add flow control support

This patch adds flow control support to Broadcom phys.

Signed-off-by Matt Carlson <[email protected]>
Signed-off-by Michael Chan <[email protected]>
---
 drivers/net/phy/broadcom.c |   18 ++++++++++++------
 1 files changed, 12 insertions(+), 6 deletions(-)
drivers/net/phy/broadcom.c +12 -6
index 4b4dc98..0fe3749 100644
@@ -335,7 +335,8 @@ static struct phy_driver bcm5411_driver = {
 	.phy_id		= 0x00206070,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5411",
-	.features	= PHY_GBIT_FEATURES,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,

@@ -349,7 +350,8 @@ static struct phy_driver bcm5421_driver = {
 	.phy_id		= 0x002060e0,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5421",
-	.features	= PHY_GBIT_FEATURES,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,

@@ -363,7 +365,8 @@ static struct phy_driver bcm5461_driver = {
 	.phy_id		= 0x002060c0,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5461",
-	.features	= PHY_GBIT_FEATURES,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,

@@ -377,7 +380,8 @@ static struct phy_driver bcm5464_driver = {
 	.phy_id		= 0x002060b0,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5464",
-	.features	= PHY_GBIT_FEATURES,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,

@@ -391,7 +395,8 @@ static struct phy_driver bcm5481_driver = {
 	.phy_id		= 0x0143bca0,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5481",
-	.features	= PHY_GBIT_FEATURES,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= bcm5481_config_aneg,

@@ -405,7 +410,8 @@ static struct phy_driver bcm5482_driver = {
 	.phy_id		= 0x0143bcb0,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5482",
-	.features	= PHY_GBIT_FEATURES,
+	.features	= PHY_GBIT_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
 	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 	.config_init	= bcm5482_config_init,
 	.config_aneg	= genphy_config_aneg,
Signature · 1 line
1.5.6.4