2.6.23-rc3 is not booting

Hai,
I am using the kernel 2.6.23-rc3. i am trying to boot this kernel
to my 8641D board. It was not booting.
I go the following message

Bytes transferred = 1505 (5e1 hex)
## Booting image at 00200000 ...

   Image Name:   Linux-2.6.23-rc3
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1801717 Bytes =  1.7 MB

Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Booting using flat device tree at 0x800000

Whether the problem belongs to device tree? I am using the mpc8641_hpcn.dts file

Pls Advice me.

View this message in context: http://www.nabble.com/2.6.23-rc3-is-not-booting-tf4309661.html#a12268833
Sent from the linuxppc-dev mailing list archive at Nabble.com.

What rev board/silicon do you have? I'd suggest building the kernel w/o PCI support and see what happens. Make sure you've got the latest dts from the kernel tree.

- k

Hi,
I am using 8641D processor and the silicon revision is 2.0.

Part : MPC8641D
Revision:  2.0
e600 Core Revision:  2.2
DeviceMarking:  B
Processor Version Register Value: 0x8004_0202
System Version Register Value:   0x8090_0120

by
Sivaji

What rev board/silicon do you have? I'd suggest building the kernel w/o PCI support and see what happens. Make sure you've got the latest dts from the kernel tree.

- k

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

View this message in context: http://www.nabble.com/2.6.23-rc3-is-not-booting-tf4309661.html#a12290295
Sent from the linuxppc-dev mailing list archive at Nabble.com.