Skip to contentSkip to conversation

Enable MSI for KVM

PATCH Applied Sheng Yang 2 participants 11 messages Nov 24, 2008 – Nov 26, 2008 KVM

lore
Share & tools
lore

Sheng Yang

author
#0 lore raw

v6 cover Enable MSI for KVM

Hi

MSI patchset v6 is coming...

v5->v6

Addressed all comments from Avi on v5. I also set msi2intx=0 in non-x86 architecture machines.

And the TODO list after this patchset:

1. A independence IOCTL to deliver MSI message data/address and related info, so that kvm_set_irq() can deliver MSI message directly.

2. Merge MSI parsing process with IOAPIC. Also speed it up with bit ops.

3. Separate lock for IOAPIC, maybe also LAPIC.

Thanks!

--
regards
Yang, Sheng

author
#1 lore raw

PATCH v6 1/9 KVM: Move ack notifier register and IRQ sourcd ID request

Distinguish common part for device assignment and INTx part, perparing for refactor later.

Signed-off-by Sheng Yang <[email protected]>
---
 virt/kvm/kvm_main.c |   30 +++++++++++++++++++-----------
 1 files changed, 19 insertions(+), 11 deletions(-)
virt/kvm/kvm_main.c +19 -11
index 4727c08..8966fd1 100644
@@ -192,16 +192,31 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 		return -EINVAL;
 	}
 
-	if (match->irq_requested) {
+	if (!match->irq_requested) {
+		INIT_WORK(&match->interrupt_work,
+				kvm_assigned_dev_interrupt_work_handler);
+		if (irqchip_in_kernel(kvm)) {
+			/* Register ack nofitier */
+			match->ack_notifier.gsi = -1;
+			match->ack_notifier.irq_acked =
+					kvm_assigned_dev_ack_irq;
+			kvm_register_irq_ack_notifier(kvm,
+					&match->ack_notifier);
+
+			/* Request IRQ source ID */
+			r = kvm_request_irq_source_id(kvm);
+			if (r < 0)
+				goto out_release;
+			else
+				match->irq_source_id = r;
+		}
+	} else {
 		match->guest_irq = assigned_irq->guest_irq;
 		match->ack_notifier.gsi = assigned_irq->guest_irq;
 		mutex_unlock(&kvm->lock);
 		return 0;
 	}
 
-	INIT_WORK(&match->interrupt_work,
-		  kvm_assigned_dev_interrupt_work_handler);
-
 	if (irqchip_in_kernel(kvm)) {
 		if (!capable(CAP_SYS_RAWIO)) {
 			r = -EPERM;

@@ -214,13 +229,6 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 			match->host_irq = match->dev->irq;
 		match->guest_irq = assigned_irq->guest_irq;
 		match->ack_notifier.gsi = assigned_irq->guest_irq;
-		match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq;
-		kvm_register_irq_ack_notifier(kvm, &match->ack_notifier);
-		r = kvm_request_irq_source_id(kvm);
-		if (r < 0)
-			goto out_release;
-		else
-			match->irq_source_id = r;
 
 		/* Even though this is PCI, we don't want to use shared
 		 * interrupts. Sharing host devices with guest-assigned devices
Signature · 1 line
1.5.4.5
author
#2 lore raw

PATCH v6 2/9 KVM: Separate update irq to a single function

In reply to Sheng Yang

Separate INTx enabling part to a independence function, so that we can add MSI enabling part easily.

Signed-off-by Sheng Yang <[email protected]>
---
 virt/kvm/kvm_main.c |   68 ++++++++++++++++++++++++++++----------------------
 1 files changed, 38 insertions(+), 30 deletions(-)
virt/kvm/kvm_main.c +38 -30
index 8966fd1..ef2f03c 100644
@@ -176,6 +176,41 @@ void kvm_free_all_assigned_devices(struct kvm *kvm)
 	}
 }
 
+static int assigned_device_update_intx(struct kvm *kvm,
+			struct kvm_assigned_dev_kernel *adev,
+			struct kvm_assigned_irq *airq)
+{
+	if (adev->irq_requested) {
+		adev->guest_irq = airq->guest_irq;
+		adev->ack_notifier.gsi = airq->guest_irq;
+		return 0;
+	}
+
+	if (irqchip_in_kernel(kvm)) {
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+
+		if (airq->host_irq)
+			adev->host_irq = airq->host_irq;
+		else
+			adev->host_irq = adev->dev->irq;
+		adev->guest_irq = airq->guest_irq;
+		adev->ack_notifier.gsi = airq->guest_irq;
+
+		/* Even though this is PCI, we don't want to use shared
+		 * interrupts. Sharing host devices with guest-assigned devices
+		 * on the same interrupt line is not a happy situation: there
+		 * are going to be long delays in accepting, acking, etc.
+		 */
+		if (request_irq(adev->host_irq, kvm_assigned_dev_intr,
+				0, "kvm_assigned_intx_device", (void *)adev))
+			return -EIO;
+	}
+
+	adev->irq_requested = true;
+	return 0;
+}
+
 static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 				   struct kvm_assigned_irq
 				   *assigned_irq)

@@ -210,39 +245,12 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 			else
 				match->irq_source_id = r;
 		}
-	} else {
-		match->guest_irq = assigned_irq->guest_irq;
-		match->ack_notifier.gsi = assigned_irq->guest_irq;
-		mutex_unlock(&kvm->lock);
-		return 0;
 	}
 
-	if (irqchip_in_kernel(kvm)) {
-		if (!capable(CAP_SYS_RAWIO)) {
-			r = -EPERM;
-			goto out_release;
-		}
-
-		if (assigned_irq->host_irq)
-			match->host_irq = assigned_irq->host_irq;
-		else
-			match->host_irq = match->dev->irq;
-		match->guest_irq = assigned_irq->guest_irq;
-		match->ack_notifier.gsi = assigned_irq->guest_irq;
-
-		/* Even though this is PCI, we don't want to use shared
-		 * interrupts. Sharing host devices with guest-assigned devices
-		 * on the same interrupt line is not a happy situation: there
-		 * are going to be long delays in accepting, acking, etc.
-		 */
-		if (request_irq(match->host_irq, kvm_assigned_dev_intr, 0,
-				"kvm_assigned_device", (void *)match)) {
-			r = -EIO;
-			goto out_release;
-		}
-	}
+	r = assigned_device_update_intx(kvm, match, assigned_irq);
+	if (r)
+		goto out_release;
 
-	match->irq_requested = true;
 	mutex_unlock(&kvm->lock);
 	return r;
 out_release:
Signature · 1 line
1.5.4.5
author
#3 lore raw

PATCH v6 3/9 KVM: Replace irq_requested with more generic irq_requested_type

In reply to Sheng Yang

Separate guest irq type and host irq type, for we can support guest using INTx with host using MSI (but not opposite combination).

Signed-off-by Sheng Yang <[email protected]>
---
 include/linux/kvm_host.h |    4 +++-
 virt/kvm/kvm_main.c      |    9 +++++----
 2 files changed, 8 insertions(+), 5 deletions(-)
include/linux/kvm_host.h +3 -1
index 3a0fb77..c3d4b96 100644
@@ -307,7 +307,9 @@ struct kvm_assigned_dev_kernel {
 	int host_devfn;
 	int host_irq;
 	int guest_irq;
-	int irq_requested;
+#define KVM_ASSIGNED_DEV_GUEST_INTX	(1 << 0)
+#define KVM_ASSIGNED_DEV_HOST_INTX	(1 << 8)
+	unsigned long irq_requested_type;
 	int irq_source_id;
 	struct pci_dev *dev;
 	struct kvm *kvm;
virt/kvm/kvm_main.c +5 -4
index ef2f03c..638de47 100644
@@ -140,7 +140,7 @@ static void kvm_free_assigned_device(struct kvm *kvm,
 				     struct kvm_assigned_dev_kernel
 				     *assigned_dev)
 {
-	if (irqchip_in_kernel(kvm) && assigned_dev->irq_requested)
+	if (irqchip_in_kernel(kvm) && assigned_dev->irq_requested_type)
 		free_irq(assigned_dev->host_irq, (void *)assigned_dev);
 
 	kvm_unregister_irq_ack_notifier(&assigned_dev->ack_notifier);

@@ -180,7 +180,7 @@ static int assigned_device_update_intx(struct kvm *kvm,
 			struct kvm_assigned_dev_kernel *adev,
 			struct kvm_assigned_irq *airq)
 {
-	if (adev->irq_requested) {
+	if (adev->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_INTX) {
 		adev->guest_irq = airq->guest_irq;
 		adev->ack_notifier.gsi = airq->guest_irq;
 		return 0;

@@ -207,7 +207,8 @@ static int assigned_device_update_intx(struct kvm *kvm,
 			return -EIO;
 	}
 
-	adev->irq_requested = true;
+	adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_INTX |
+				   KVM_ASSIGNED_DEV_HOST_INTX;
 	return 0;
 }
 

@@ -227,7 +228,7 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 		return -EINVAL;
 	}
 
-	if (!match->irq_requested) {
+	if (!match->irq_requested_type) {
 		INIT_WORK(&match->interrupt_work,
 				kvm_assigned_dev_interrupt_work_handler);
 		if (irqchip_in_kernel(kvm)) {
Signature · 1 line
1.5.4.5
author
#4 lore raw

PATCH v6 4/9 KVM: Clean up assigned_device_update_irq

In reply to Sheng Yang
Signed-off-by Sheng Yang <[email protected]>
---
 virt/kvm/kvm_main.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)
virt/kvm/kvm_main.c +4 -6
index 638de47..2089f8b 100644
@@ -180,11 +180,11 @@ static int assigned_device_update_intx(struct kvm *kvm,
 			struct kvm_assigned_dev_kernel *adev,
 			struct kvm_assigned_irq *airq)
 {
-	if (adev->irq_requested_type & KVM_ASSIGNED_DEV_GUEST_INTX) {
-		adev->guest_irq = airq->guest_irq;
-		adev->ack_notifier.gsi = airq->guest_irq;
+	adev->guest_irq = airq->guest_irq;
+	adev->ack_notifier.gsi = airq->guest_irq;
+
+	if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_INTX)
 		return 0;
-	}
 
 	if (irqchip_in_kernel(kvm)) {
 		if (!capable(CAP_SYS_RAWIO))

@@ -194,8 +194,6 @@ static int assigned_device_update_intx(struct kvm *kvm,
 			adev->host_irq = airq->host_irq;
 		else
 			adev->host_irq = adev->dev->irq;
-		adev->guest_irq = airq->guest_irq;
-		adev->ack_notifier.gsi = airq->guest_irq;
 
 		/* Even though this is PCI, we don't want to use shared
 		 * interrupts. Sharing host devices with guest-assigned devices
Signature · 1 line
1.5.4.5
author
#5 lore raw

PATCH v6 5/9 KVM: Add fields for MSI device assignment

In reply to Sheng Yang

Prepared for kvm_arch_assigned_device_msi_dispatch().

Signed-off-by Sheng Yang <[email protected]>
---
 include/linux/kvm.h      |    7 +++++++
 include/linux/kvm_host.h |    4 ++++
 2 files changed, 11 insertions(+), 0 deletions(-)
include/linux/kvm.h +7 -0
index 44fd7fa..bb283c3 100644
@@ -507,10 +507,17 @@ struct kvm_assigned_irq {
 	__u32 guest_irq;
 	__u32 flags;
 	union {
+		struct {
+			__u32 addr_lo;
+			__u32 addr_hi;
+			__u32 data;
+		} guest_msi;
 		__u32 reserved[12];
 	};
 };
 
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
+#define KVM_DEV_IRQ_ASSIGN_ENABLE_MSI	(1 << 0)
+
 #endif
include/linux/kvm_host.h +4 -0
index c3d4b96..8091a4d 100644
@@ -16,6 +16,7 @@
 #include <linux/mm.h>
 #include <linux/preempt.h>
 #include <linux/marker.h>
+#include <linux/msi.h>
 #include <asm/signal.h>
 
 #include <linux/kvm.h>

@@ -307,8 +308,11 @@ struct kvm_assigned_dev_kernel {
 	int host_devfn;
 	int host_irq;
 	int guest_irq;
+	struct msi_msg guest_msi;
 #define KVM_ASSIGNED_DEV_GUEST_INTX	(1 << 0)
+#define KVM_ASSIGNED_DEV_GUEST_MSI	(1 << 1)
 #define KVM_ASSIGNED_DEV_HOST_INTX	(1 << 8)
+#define KVM_ASSIGNED_DEV_HOST_MSI	(1 << 9)
 	unsigned long irq_requested_type;
 	int irq_source_id;
 	struct pci_dev *dev;
Signature · 1 line
1.5.4.5
author
#6 lore raw

PATCH v6 6/9 KVM: Export ioapic_get_delivery_bitmask

In reply to Sheng Yang

It would be used for MSI in device assignment, for MSI dispatch.

Signed-off-by Sheng Yang <[email protected]>
---
 virt/kvm/ioapic.c |    7 ++++---
 virt/kvm/ioapic.h |    2 ++
 2 files changed, 6 insertions(+), 3 deletions(-)
virt/kvm/ioapic.c +4 -3
index c8f939c..23b81cf 100644
@@ -153,8 +153,8 @@ static void ioapic_inj_nmi(struct kvm_vcpu *vcpu)
 	kvm_vcpu_kick(vcpu);
 }
 
-static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
-				       u8 dest_mode)
+u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
+				    u8 dest_mode)
 {
 	u32 mask = 0;
 	int i;

@@ -208,7 +208,8 @@ static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
 		     "vector=%x trig_mode=%x\n",
 		     dest, dest_mode, delivery_mode, vector, trig_mode);
 
-	deliver_bitmask = ioapic_get_delivery_bitmask(ioapic, dest, dest_mode);
+	deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic, dest,
+							  dest_mode);
 	if (!deliver_bitmask) {
 		ioapic_debug("no target on destination\n");
 		return 0;
virt/kvm/ioapic.h +2 -0
index cd7ae76..49c9581 100644
@@ -85,5 +85,7 @@ void kvm_ioapic_update_eoi(struct kvm *kvm, int vector, int trigger_mode);
 int kvm_ioapic_init(struct kvm *kvm);
 void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level);
 void kvm_ioapic_reset(struct kvm_ioapic *ioapic);
+u32 kvm_ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
+				u8 dest_mode);
 
 #endif
Signature · 1 line
1.5.4.5
author
#7 lore raw

PATCH v6 7/9 KVM: Add assigned_device_msi_dispatch()

In reply to Sheng Yang

The function is used to dispatch MSI to lapic according to MSI message address and message data.

Signed-off-by Sheng Yang <[email protected]>
---
 virt/kvm/kvm_main.c |   55 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 55 insertions(+), 0 deletions(-)
virt/kvm/kvm_main.c +55 -0
index 2089f8b..228c1d1 100644
@@ -47,6 +47,10 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 
+#ifdef CONFIG_X86
+#include <asm/msidef.h>
+#endif
+
 #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
 #include "coalesced_mmio.h"
 #endif

@@ -78,6 +82,57 @@ static long kvm_vcpu_ioctl(struct file *file, unsigned int ioctl,
 bool kvm_rebooting;
 
 #ifdef KVM_CAP_DEVICE_ASSIGNMENT
+
+#ifdef CONFIG_X86
+static void assigned_device_msi_dispatch(struct kvm_assigned_dev_kernel *dev)
+{
+	int vcpu_id;
+	struct kvm_vcpu *vcpu;
+	struct kvm_ioapic *ioapic = ioapic_irqchip(dev->kvm);
+	int dest_id = (dev->guest_msi.address_lo & MSI_ADDR_DEST_ID_MASK)
+			>> MSI_ADDR_DEST_ID_SHIFT;
+	int vector = (dev->guest_msi.data & MSI_DATA_VECTOR_MASK)
+			>> MSI_DATA_VECTOR_SHIFT;
+	int dest_mode = test_bit(MSI_ADDR_DEST_MODE_SHIFT,
+				(unsigned long *)&dev->guest_msi.address_lo);
+	int trig_mode = test_bit(MSI_DATA_TRIGGER_SHIFT,
+				(unsigned long *)&dev->guest_msi.data);
+	int delivery_mode = test_bit(MSI_DATA_DELIVERY_MODE_SHIFT,
+				(unsigned long *)&dev->guest_msi.data);
+	u32 deliver_bitmask;
+
+	BUG_ON(!ioapic);
+
+	deliver_bitmask = kvm_ioapic_get_delivery_bitmask(ioapic,
+				dest_id, dest_mode);
+	/* IOAPIC delivery mode value is the same as MSI here */
+	switch (delivery_mode) {
+	case IOAPIC_LOWEST_PRIORITY:
+		vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector,
+				deliver_bitmask);
+		if (vcpu != NULL)
+			kvm_apic_set_irq(vcpu, vector, trig_mode);
+		else
+			printk(KERN_INFO "kvm: null lowest priority vcpu!\n");
+		break;
+	case IOAPIC_FIXED:
+		for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) {
+			if (!(deliver_bitmask & (1 << vcpu_id)))
+				continue;
+			deliver_bitmask &= ~(1 << vcpu_id);
+			vcpu = ioapic->kvm->vcpus[vcpu_id];
+			if (vcpu)
+				kvm_apic_set_irq(vcpu, vector, trig_mode);
+		}
+		break;
+	default:
+		printk(KERN_INFO "kvm: unsupported MSI delivery mode\n");
+	}
+}
+#else
+static void assigned_device_msi_dispatch(struct kvm_assigned_dev_kernel *dev) {}
+#endif
+
 static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
 						      int assigned_dev_id)
 {
Signature · 1 line
1.5.4.5
author
#8 lore raw

PATCH v6 8/9 KVM: Enable MSI for device assignment

In reply to Sheng Yang

We enable guest MSI and host MSI support in this patch. The userspace want to enable MSI should set KVM_DEV_IRQ_ASSIGN_ENABLE_MSI in the assigned_irq's flag. Function would return -ENOTTY if can't enable MSI, userspace shouldn't set MSI Enable bit when KVM_ASSIGN_IRQ return -ENOTTY with KVM_DEV_IRQ_ASSIGN_ENABLE_MSI.

Userspace can tell the support of MSI device from #ifdef KVM_CAP_DEVICE_MSI.

Signed-off-by Sheng Yang <[email protected]>
---
 include/linux/kvm.h |    3 ++
 virt/kvm/kvm_main.c |   81 +++++++++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 78 insertions(+), 6 deletions(-)
include/linux/kvm.h +3 -0
index bb283c3..0997e6f 100644
@@ -392,6 +392,9 @@ struct kvm_trace_rec {
 #endif
 #define KVM_CAP_IOMMU 18
 #define KVM_CAP_NMI 19
+#if defined(CONFIG_X86)
+#define KVM_CAP_DEVICE_MSI 20
+#endif
 
 /*
  * ioctls for VM fds
virt/kvm/kvm_main.c +75 -6

111 lines not on this page · raw message

Signature · 1 line
1.5.4.5
author
#9 lore raw

PATCH v6 9/9 KVM: MSI to INTx translate

In reply to Sheng Yang

Now we use MSI as default one, and translate MSI to INTx when guest need INTx rather than MSI. For legacy device, we provide support for non-sharing host IRQ.

Provide a parameter msi2intx for this method. The value is true by default in x86 architecture.

We can't guarantee this mode can work on every device, but for most of us tested, it works. If your device encounter some trouble with this mode, you can try set msi2intx modules parameter to 0. If the device is OK with msi2intx=0, then please report it to KVM mailing list or me. We may prepare a blacklist for the device that can't work in this mode.

Signed-off-by Sheng Yang <[email protected]>
---
 virt/kvm/kvm_main.c |   70 +++++++++++++++++++++++++++++++++++++++-----------
 1 files changed, 54 insertions(+), 16 deletions(-)
virt/kvm/kvm_main.c +54 -16
index bf36ae9..54d25e6 100644
@@ -64,6 +64,9 @@
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
+static int msi2intx = 1;
+module_param(msi2intx, bool, 0);
+
 DEFINE_SPINLOCK(kvm_lock);
 LIST_HEAD(vm_list);
 

@@ -250,7 +253,8 @@ static int assigned_device_update_intx(struct kvm *kvm,
 		return 0;
 
 	if (irqchip_in_kernel(kvm)) {
-		if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) {
+		if (!msi2intx &&
+		    adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI) {
 			free_irq(adev->host_irq, (void *)kvm);
 			pci_disable_msi(adev->dev);
 		}

@@ -285,21 +289,33 @@ static int assigned_device_update_msi(struct kvm *kvm,
 {
 	int r;
 
-	/* x86 don't care upper address of guest msi message addr */
-	adev->guest_msi.address_lo = airq->guest_msi.addr_lo;
-	adev->guest_msi.data = airq->guest_msi.data;
-	adev->ack_notifier.gsi = -1;
+	if (airq->flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI) {
+		/* x86 don't care upper address of guest msi message addr */
+		adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_MSI;
+		adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_INTX;
+		adev->guest_msi.address_lo = airq->guest_msi.addr_lo;
+		adev->guest_msi.data = airq->guest_msi.data;
+		adev->ack_notifier.gsi = -1;
+	} else if (msi2intx) {
+		adev->irq_requested_type |= KVM_ASSIGNED_DEV_GUEST_INTX;
+		adev->irq_requested_type &= ~KVM_ASSIGNED_DEV_GUEST_MSI;
+		adev->guest_irq = airq->guest_irq;
+		adev->ack_notifier.gsi = airq->guest_irq;
+	}
 
 	if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_MSI)
 		return 0;
 
 	if (irqchip_in_kernel(kvm)) {
-		if (adev->irq_requested_type & KVM_ASSIGNED_DEV_HOST_INTX)
-			free_irq(adev->host_irq, (void *)adev);
-
-		r = pci_enable_msi(adev->dev);
-		if (r)
-			return r;
+		if (!msi2intx) {
+			if (adev->irq_requested_type &
+					KVM_ASSIGNED_DEV_HOST_INTX)
+				free_irq(adev->host_irq, (void *)adev);
+
+			r = pci_enable_msi(adev->dev);
+			if (r)
+				return r;
+		}
 
 		adev->host_irq = adev->dev->irq;
 		if (request_irq(adev->host_irq, kvm_assigned_dev_intr, 0,

@@ -307,8 +323,10 @@ static int assigned_device_update_msi(struct kvm *kvm,
 			return -EIO;
 	}
 
-	adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_MSI |
-				   KVM_ASSIGNED_DEV_HOST_MSI;
+	if (!msi2intx)
+		adev->irq_requested_type = KVM_ASSIGNED_DEV_GUEST_MSI;
+
+	adev->irq_requested_type |= KVM_ASSIGNED_DEV_HOST_MSI;
 	return 0;
 }
 #endif

@@ -346,10 +364,19 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 				goto out_release;
 			else
 				match->irq_source_id = r;
+
+#ifdef CONFIG_X86
+			/* Determine host device irq type, we can know the
+			 * result from dev->msi_enabled */
+			if (msi2intx)
+				pci_enable_msi(match->dev);
+#endif
 		}
 	}
 
-	if (assigned_irq->flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI) {
+	if ((!msi2intx &&
+	     (assigned_irq->flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI)) ||
+	    (msi2intx && match->dev->msi_enabled)) {
 #ifdef CONFIG_X86
 		r = assigned_device_update_msi(kvm, match, assigned_irq);
 		if (r) {

@@ -362,8 +389,16 @@ static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
 #endif
 	} else if (assigned_irq->host_irq == 0 && match->dev->irq == 0) {
 		/* Host device IRQ 0 means don't support INTx */
-		printk(KERN_WARNING "kvm: wait device to enable MSI!\n");
-		r = 0;
+		if (!msi2intx) {
+			printk(KERN_WARNING
+			       "kvm: wait device to enable MSI!\n");
+			r = 0;
+		} else {
+			printk(KERN_WARNING
+			       "kvm: failed to enable MSI device!\n");
+			r = -ENOTTY;
+			goto out_release;
+		}
 	} else {
 		/* Non-sharing INTx mode */
 		r = assigned_device_update_intx(kvm, match, assigned_irq);

@@ -2209,6 +2244,9 @@ int kvm_init(void *opaque, unsigned int vcpu_size,
 
 	kvm_preempt_ops.sched_in = kvm_sched_in;
 	kvm_preempt_ops.sched_out = kvm_sched_out;
+#ifndef CONFIG_X86
+	msi2intx = 0;
+#endif
 
 	return 0;
Signature · 1 line
1.5.4.5
Applied
#10 lore raw
In reply to Sheng Yang
Quoted 9 lines · Sheng Yang

Hi

MSI patchset v6 is coming...

v5->v6

Addressed all comments from Avi on v5. I also set msi2intx=0 in non-x86 architecture machines.

Applied all, thanks.

Signature · 1 line
error compiling committee.c: too many arguments to function