Skip to contentSkip to conversation

FSL: Moved BR_PHYS_ADDR for localbus to common header

PATCH Superseded Kumar Gala 1 participant 1 message Nov 24, 2008

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Kumar Gala

author
#0 lore raw

PATCH 2/3 FSL: Moved BR_PHYS_ADDR for localbus to common header

The BR_PHYS_ADDR macro is useful on all machines that have local bus which is pretty much all 83xx/85xx/86xx chips.

Additionally most 85xx & 86xx will need it if they want to support 36-bit physical addresses.

---
 include/asm-ppc/fsl_lbc.h     |    8 ++++++++
 include/configs/MPC8641HPCN.h |    9 ---------
 2 files changed, 8 insertions(+), 9 deletions(-)
include/asm-ppc/fsl_lbc.h +8 -0
index cac7bf6..51fc5c1 100644
@@ -69,6 +69,14 @@
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
 #endif
 
+/* Convert an address into the right format for the BR registers */
+#ifdef CONFIG_PHYS_64BIT
+#define BR_PHYS_ADDR(x)	((unsigned long)((x & 0x0ffff8000ULL) | \
+					 ((x & 0x300000000ULL) >> 19)))
+#else
+#define BR_PHYS_ADDR(x) (x & 0xffff8000)
+#endif
+
 /* OR - Option Registers
  */
 #define OR0				0x5004		/* Register offset to immr */
include/configs/MPC8641HPCN.h +0 -9
index 69b4c44..08a88b0 100644
@@ -186,17 +186,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_FLASH_BASE_PHYS	(CONFIG_SYS_FLASH_BASE \
 					 | CONFIG_SYS_PHYS_ADDR_HIGH)
 
-
 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
 
-/* Convert an address into the right format for the BR registers */
-#ifdef CONFIG_PHYS_64BIT
-#define BR_PHYS_ADDR(x)	((unsigned long)((x & 0x0ffff8000ULL) | \
-					 ((x & 0x300000000ULL) >> 19)))
-#else
-#define BR_PHYS_ADDR(x) (x & 0xffff8000)
-#endif
-
 #define CONFIG_SYS_BR0_PRELIM	(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 				 | 0x00001001)	/* port size 16bit */
 #define CONFIG_SYS_OR0_PRELIM	0xff806ff7	/* 8MB Boot Flash area*/
Signature · 1 line
1.5.6.5