backlight: don't default y
Subsystems (2)
PATCH 1/1 backlight: don't default y
Not all the backlight drivers make sense, especially not the "generic" one that works on some sharp devices. "default n" is also absolutely pointless, and not everybody needs LCD backlight support either.
--- drivers/video/backlight/Kconfig | 13 ------------- 1 file changed, 13 deletions(-)
drivers/video/backlight/Kconfig +0 -13
@@ -14,7 +14,6 @@ menuconfig BACKLIGHT_LCD_SUPPORT config LCD_CLASS_DEVICE tristate "Lowlevel LCD controls" depends on BACKLIGHT_LCD_SUPPORT - default m help This framework adds support for low-level control of LCD. Some framebuffer devices connect to platform-specific LCD modules
@@ -34,7 +33,6 @@ config LCD_CORGI config LCD_LTV350QV tristate "Samsung LTV350QV LCD Panel" depends on LCD_CLASS_DEVICE && SPI_MASTER - default n help If you have a Samsung LTV350QV LCD panel, say y to include a power control driver for it. The panel starts up in power
@@ -46,7 +44,6 @@ config LCD_LTV350QV config LCD_ILI9320 tristate depends on LCD_CLASS_DEVICE && BACKLIGHT_LCD_SUPPORT - default n help If you have a panel based on the ILI9320 controller chip then say y to include a power driver for it.
@@ -54,7 +51,6 @@ config LCD_ILI9320 config LCD_TDO24M tristate "Toppoly TDO24M and TDO35S LCD Panels support" depends on LCD_CLASS_DEVICE && SPI_MASTER - default n help If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to include the support for it.
@@ -63,7 +59,6 @@ config LCD_VGG2432A4 tristate "VGG2432A4 LCM device support" depends on BACKLIGHT_LCD_SUPPORT && LCD_CLASS_DEVICE && SPI_MASTER select LCD_ILI9320 - default n help If you have a VGG2432A4 panel based on the ILI9320 controller chip then say y to include a power driver for it.
@@ -79,7 +74,6 @@ config LCD_TOSA tristate "Sharp SL-6000 LCD Driver" depends on LCD_CLASS_DEVICE && SPI depends on MACH_TOSA - default n help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its LCD.
@@ -114,7 +108,6 @@ config BACKLIGHT_ATMEL_LCDC config BACKLIGHT_ATMEL_PWM tristate "Atmel PWM backlight control" depends on BACKLIGHT_CLASS_DEVICE && ATMEL_PWM - default n help Say Y here if you want to use the PWM peripheral in Atmel AT91 and AVR32 devices. This driver will need additional platform data to know
@@ -126,7 +119,6 @@ config BACKLIGHT_ATMEL_PWM config BACKLIGHT_GENERIC tristate "Generic (aka Sharp Corgi) Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE - default y help Say y to enable the generic platform backlight driver previously known as the Corgi backlight driver. If you have a Sharp Zaurus
@@ -160,7 +152,6 @@ config BACKLIGHT_HP680 config BACKLIGHT_PROGEAR tristate "Frontpath ProGear Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && PCI && X86 - default n help If you have a Frontpath ProGear say Y to enable the backlight driver.
@@ -168,7 +159,6 @@ config BACKLIGHT_PROGEAR config BACKLIGHT_CARILLO_RANCH tristate "Intel Carillo Ranch Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 - default n help If you have a Intel LE80578 (Carillo Ranch) say Y to enable the backlight driver.
@@ -190,7 +180,6 @@ config BACKLIGHT_DA903X config BACKLIGHT_MBP_NVIDIA tristate "MacBook Pro Nvidia Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && X86 - default n help If you have an Apple Macbook Pro with Nvidia graphics hardware say Y to enable a driver for its backlight
@@ -199,7 +188,6 @@ config BACKLIGHT_TOSA tristate "Sharp SL-6000 Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && I2C depends on MACH_TOSA && LCD_TOSA - default n help If you have an Sharp SL-6000 Zaurus say Y to enable a driver for its backlight
@@ -207,7 +195,6 @@ config BACKLIGHT_TOSA config BACKLIGHT_SAHARA tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && X86 - default n help If you have a Tabletkiosk Sahara Touch-iT, say y to enable the backlight driver.
drivers/video/backlight/Kconfig config BACKLIGHT_ATMEL_PWM · line 122
Quoted 9 lines · Johannes Berg
Not all the backlight drivers make sense, especially not the "generic" one that works on some sharp devices. "default n" is also absolutely pointless, and not everybody needs LCD backlight support either.
config
BACKLIGHT_GENERICdrivers/video/backlight/Kconfig +0
-1tristate "Generic (aka Sharp Corgi) Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE - default y help
I asked about this one recently - apparently it's planned to be much more generic, but the help text still implies it's Sharp-specific.
Quoted 5 lines · On Tue, 2009-01-13 at 18:30 -0500, [email protected] wrote:
Quoted 3 lines · Johannes Berg
Not all the backlight drivers make sense, especially not the "generic" one that works on some sharp devices. "default n" is also absolutely pointless, and not everybody needs LCD backlight support either.
Quoted 8 lines
drivers/video/backlight/Kconfig config BACKLIGHT_ATMEL_PWM · line 122
Quoted 5 lines
config
BACKLIGHT_GENERICdrivers/video/backlight/Kconfig +0
-1tristate "Generic (aka Sharp Corgi) Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE - default y helpI asked about this one recently - apparently it's planned to be much more generic, but the help text still implies it's Sharp-specific.
Even if, it still shouldn't be default y.
johannes