Skip to contentSkip to conversation

Partitiontable destroyed with gentoo installer

linux-lvm Thomas Scheller 1 participant 1 message Sep 7, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

if someone is interested in the solution of this issue, have a look at:
http://forums.gentoo.org/viewtopic-p-3562137.html#3562137

Best regards
Thomas

Quoted 48 lines

-----Urspr�ngliche Nachricht-----
Von: LVM general discussion and development <[email protected]>
Gesendet: 02.09.06 23:27:59
An: [email protected]
Betreff: [linux-lvm] Partitiontable destroyed with gentoo installer

Hi,

I have a 250GB harddisk. I used the whole disk as a PV.

# pvcreate /dev/hdb

and did create a volume group

vgcreate vg_250GB /dev/hdb

and 2 logical volumes

lv_old_system with 50GB
and
lv_storage with the rest of the disk

then I did copy all the data from the old harddisk to lv_old_system.

With the Gentoo live CD I did then install gentoo linux to the old harddrive.
The gentoo installer did delete the partitiontable on all connected harddrives :-(
So my logicalvolumes are not available anymore.
But vgchange shows that lv_old_system is somehow still available. Can you help me please, to recover that volume?
As I did create the logical volume with the old SuSE 8 installation, which I did overwrite with the gentoo installation, I do not have the metadata backup in /etc :-(

thinkpad ~ # vgchange -v -ay vg_250GB
Using volume group(s) on command line
Finding volume group "vg_250GB"
Logical volume (lv_old_system) contains an incomplete mapping table.
Wiping cache of LVM-capable devices
Logical volume (lv_old_system) contains an incomplete mapping table. Volume group "vg_250GB" not found
thinkpad ~ #

Thank you in advance
Thomas

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/