driver core: check bus->match without holding device lock
PATCH 1/1 driver core: check bus->match without holding device lock
From: Ming Lei <[email protected]>
This patch moves bus->match out from driver_probe_device and does not hold device lock to check the match between a device and a driver.
The idea has been verified by the commit 6cd495860901, which leads to a faster boot. But the commit 6cd495860901 has the following drawbacks: 1),only does the quick check in the path of __driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver).
This patch adds a helper of driver_match_device to check the match in all paths, and testes the match only once.
--- drivers/base/bus.c | 8 +++++++- drivers/base/dd.c | 19 +++++++------------ include/linux/device.h | 6 ++++++ 3 files changed, 20 insertions(+), 13 deletions(-)
drivers/base/bus.c +7 -1
@@ -199,6 +199,12 @@ static ssize_t driver_bind(struct device_driver *drv, dev =bus_find_device_by_name (bus,NULL , buf);if (dev && dev->driver ==NULL ) { + +if (!driver_match_device (drv, dev)) { + err =0 ; + goto not_match; + } +if (dev->parent)/* Needed for USB */ down (&dev->parent->sem);down (&dev->sem);
@@ -206,7 +212,7 @@ static ssize_t driver_bind(struct device_driver *drv,up (&dev->sem);if (dev->parent)up (&dev->parent->sem); - +not_match:if (err >0 ) {/* success */ err = count;
drivers/base/dd.c +7 -12
@@ -172,14 +172,8 @@ int driver_probe_done(void)* @drv: driver to bind a device to * @dev: device to try to bind to the driver * -* First, we call the bus's match function, if one present, which should -* compare the device IDs the driver supports with the device IDs of the -* device. Note we don't do this ourselves because we don't know the -* format of the ID structures, nor what is to be considered a match and -* what is not. -* -* This function returns 1 if a match is found, -ENODEV if the device is -* not registered, and 0 otherwise. +* This function returns -ENODEV if the device is not registered, +* and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well.
@@ -190,21 +184,22 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)if (!device_is_registered (dev))return -ENODEV ; -if (drv->bus->match && !drv->bus->match (dev, drv)) - goto done;pr_debug ("bus: '%s': %s: matched device %s with driver %s\n" , drv->bus->name, __func__,dev_name (dev), drv->name); ret =really_probe (dev, drv); -done:return ret; }static int __device_attach (struct device_driver *drv,void *data) {struct device *dev = data; + +if (!driver_match_device (drv, dev)) +return 0 ; +return driver_probe_device (drv, dev); }
@@ -257,7 +252,7 @@ static int __driver_attach(struct device *dev, void *data)* is an error. */ -if (drv->bus->match && !drv->bus->match (dev, drv)) +if (!driver_match_device (drv, dev))return 0 ;if (dev->parent)/* Needed for USB */
include/linux/device.h +6 -0
@@ -466,6 +466,12 @@ static inline int device_is_registered(struct device *dev)return dev->kobj.state_in_sysfs; } +static inline int driver_match_device (struct device_driver *drv, +struct device *dev) +{ +return drv->bus->match && drv->bus->match (dev, drv); +} +void driver_init (void );/*
Signature · 1 line
1.6.0
Quoted 6 lines · On Tue, 20 Jan 2009 21:34:08 +0800, [email protected] wrote:
From: Ming Lei <[email protected]>
This patch moves
bus->matchout fromdriver_probe_deviceand does not hold device lock to check the match between a device and a driver.
Quoted 7 lines
The idea has been verified by the commit
6cd495860901, which leads to a faster boot. But the commit6cd495860901has the following drawbacks: 1),only does the quick check in the path of__driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver).
I agree with the goal of that patch, as it essentially cleanly seperates the quick check (->match) from the deeper probing (->probe).
Quoted 16 lines
This patch adds a helper of
driver_match_deviceto check the match in all paths, and testes the match only once.Signed-off-by Ming Lei <[email protected]>--- drivers/base/bus.c | 8 +++++++- drivers/base/dd.c | 19 +++++++------------ include/linux/device.h | 6 ++++++ 3 files changed, 20 insertions(+), 13 deletions(-)drivers/base/bus.c +0
-0
drivers/base/bus.c static ssize_t driver_bind(struct device_driver *drv, · line 207
Quoted 9 lines
drivers/base/bus.c +6
-0@@ -199,6 +199,12 @@ static ssize_t driver_bind(struct device_driver *drv, dev =bus_find_device_by_name (bus,NULL , buf);if (dev && dev->driver ==NULL ) { + +if (!driver_match_device (drv, dev)) { + err =0 ; + goto not_match; + } +
This looks too complicated, I'd just change the if to
if (dev && dev->driver == NULL && driver_match_device(drv,dev))
Quoted 20 lines
drivers/base/bus.c +1
-1if (dev->parent)/* Needed for USB */ down (&dev->parent->sem);down (&dev->sem);@@ -206,7 +212,7 @@ static ssize_t driver_bind(struct device_driver *drv,up (&dev->sem);if (dev->parent)up (&dev->parent->sem); - +not_match:if (err >0 ) {/* success */ err = count;drivers/base/dd.c +0
-0@@ -172,14 +172,8 @@ int driver_probe_done(void)* @drv: driver to bind a device to * @dev: device to try to bind to the driver *
drivers/base/dd.c int driver_probe_done(void) · line 176
Quoted 10 lines
drivers/base/dd.c +2
-8-* First, we call the bus's match function, if one present, which should -* compare the device IDs the driver supports with the device IDs of the -* device. Note we don't do this ourselves because we don't know the -* format of the ID structures, nor what is to be considered a match and -* what is not. -* -* This function returns 1 if a match is found, -ENODEV if the device is -* not registered, and 0 otherwise. +* This function returns -ENODEV if the device is not registered, +* and 0 otherwise.
This is incorrect, really_probe() still returns 1 if the device could be bound.
Quoted 43 lines
drivers/base/dd.c +5
-4* * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well. @@ -190,21 +184,22 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)if (!device_is_registered (dev))return -ENODEV ; -if (drv->bus->match && !drv->bus->match (dev, drv)) - goto done;pr_debug ("bus: '%s': %s: matched device %s with driver %s\n" , drv->bus->name, __func__,dev_name (dev), drv->name); ret =really_probe (dev, drv); -done:return ret; }static int __device_attach (struct device_driver *drv,void *data) {struct device *dev = data; + +if (!driver_match_device (drv, dev)) +return 0 ; +return driver_probe_device (drv, dev); }@@ -257,7 +252,7 @@ static int __driver_attach(struct device *dev, void *data)* is an error. */ -if (drv->bus->match && !drv->bus->match (dev, drv)) +if (!driver_match_device (drv, dev))return 0 ;if (dev->parent)/* Needed for USB */ include/linux/device.h +0
-0
include/linux/device.h static inline int device_is_registered(struct device *dev) · line 474
Quoted 9 lines
include/linux/device.h +6
-0@@ -466,6 +466,12 @@ static inline int device_is_registered(struct device *dev)return dev->kobj.state_in_sysfs; } +static inline int driver_match_device (struct device_driver *drv, +struct device *dev) +{ +return drv->bus->match && drv->bus->match (dev, drv); +} +
This should go into drivers/base/base.h instead, as no code outside the driver core should use it.
Quoted 3 lines
include/linux/device.h +0
-0void driver_init (void );/*
Thanks a lot for your reply.
I'll resend a patch with your suggestions.
2009/1/20 Cornelia Huck <[email protected]>:
Quoted 143 lines
Quoted 6 lines · On Tue, 20 Jan 2009 21:34:08 +0800, [email protected] wrote:
From: Ming Lei <[email protected]>
This patch moves
bus->matchout fromdriver_probe_deviceand does not hold device lock to check the match between a device and a driver.Quoted 7 lines
The idea has been verified by the commit
6cd495860901, which leads to a faster boot. But the commit6cd495860901has the following drawbacks: 1),only does the quick check in the path of__driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver).I agree with the goal of that patch, as it essentially cleanly seperates the quick check (->match) from the deeper probing (->probe).
Quoted 16 lines
This patch adds a helper of
driver_match_deviceto check the match in all paths, and testes the match only once.Signed-off-by Ming Lei <[email protected]>--- drivers/base/bus.c | 8 +++++++- drivers/base/dd.c | 19 +++++++------------ include/linux/device.h | 6 ++++++ 3 files changed, 20 insertions(+), 13 deletions(-)drivers/base/bus.c +0
-0drivers/base/bus.c static ssize_t driver_bind(struct device_driver *drv, · line 207
Quoted 9 lines
drivers/base/bus.c +6
-0@@ -199,6 +199,12 @@ static ssize_t driver_bind(struct device_driver *drv, dev =bus_find_device_by_name (bus,NULL , buf);if (dev && dev->driver ==NULL ) { + +if (!driver_match_device (drv, dev)) { + err =0 ; + goto not_match; + } +This looks too complicated, I'd just change the if to
if (dev && dev->driver == NULL && driver_match_device(drv,dev))Quoted 20 lines
drivers/base/bus.c +1
-1if (dev->parent)/* Needed for USB */ down (&dev->parent->sem);down (&dev->sem);@@ -206,7 +212,7 @@ static ssize_t driver_bind(struct device_driver *drv,up (&dev->sem);if (dev->parent)up (&dev->parent->sem); - +not_match:if (err >0 ) {/* success */ err = count;drivers/base/dd.c +0
-0@@ -172,14 +172,8 @@ int driver_probe_done(void)* @drv: driver to bind a device to * @dev: device to try to bind to the driver * drivers/base/dd.c int driver_probe_done(void) · line 176
Quoted 10 lines
drivers/base/dd.c +2
-8-* First, we call the bus's match function, if one present, which should -* compare the device IDs the driver supports with the device IDs of the -* device. Note we don't do this ourselves because we don't know the -* format of the ID structures, nor what is to be considered a match and -* what is not. -* -* This function returns 1 if a match is found, -ENODEV if the device is -* not registered, and 0 otherwise. +* This function returns -ENODEV if the device is not registered, +* and 0 otherwise. This is incorrect,
really_probe()still returns 1 if the device could be bound.Quoted 43 lines
drivers/base/dd.c +5
-4* * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well. @@ -190,21 +184,22 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)if (!device_is_registered (dev))return -ENODEV ; -if (drv->bus->match && !drv->bus->match (dev, drv)) - goto done;pr_debug ("bus: '%s': %s: matched device %s with driver %s\n" , drv->bus->name, __func__,dev_name (dev), drv->name); ret =really_probe (dev, drv); -done:return ret; }static int __device_attach (struct device_driver *drv,void *data) {struct device *dev = data; + +if (!driver_match_device (drv, dev)) +return 0 ; +return driver_probe_device (drv, dev); }@@ -257,7 +252,7 @@ static int __driver_attach(struct device *dev, void *data)* is an error. */ -if (drv->bus->match && !drv->bus->match (dev, drv)) +if (!driver_match_device (drv, dev))return 0 ;if (dev->parent)/* Needed for USB */ include/linux/device.h +0
-0include/linux/device.h static inline int device_is_registered(struct device *dev) · line 474
Quoted 9 lines
include/linux/device.h +6
-0@@ -466,6 +466,12 @@ static inline int device_is_registered(struct device *dev)return dev->kobj.state_in_sysfs; } +static inline int driver_match_device (struct device_driver *drv, +struct device *dev) +{ +return drv->bus->match && drv->bus->match (dev, drv); +} +This should go into
drivers/base/base.hinstead, as no code outside the driver core should use it.Quoted 3 lines
include/linux/device.h +0
-0void driver_init (void );/*
Signature · 1 line
Lei Ming
Hi,
this patch breaks soc-camera because of this change in behaviour:
Quoted 72 lines · On Tue, 20 Jan 2009, [email protected] wrote:
From: Ming Lei <[email protected]>
This patch moves
bus->matchout fromdriver_probe_deviceand does not hold device lock to check the match between a device and a driver.The idea has been verified by the commit
6cd495860901, which leads to a faster boot. But the commit6cd495860901has the following drawbacks: 1),only does the quick check in the path of__driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver).This patch adds a helper of
driver_match_deviceto check the match in all paths, and testes the match only once.Signed-off-by Ming Lei <[email protected]>--- drivers/base/bus.c | 8 +++++++- drivers/base/dd.c | 19 +++++++------------ include/linux/device.h | 6 ++++++ 3 files changed, 20 insertions(+), 13 deletions(-)drivers/base/bus.c +7
-1@@ -199,6 +199,12 @@ static ssize_t driver_bind(struct device_driver *drv, dev =bus_find_device_by_name (bus,NULL , buf);if (dev && dev->driver ==NULL ) { + +if (!driver_match_device (drv, dev)) { + err =0 ; + goto not_match; + } +if (dev->parent)/* Needed for USB */ down (&dev->parent->sem);down (&dev->sem);@@ -206,7 +212,7 @@ static ssize_t driver_bind(struct device_driver *drv,up (&dev->sem);if (dev->parent)up (&dev->parent->sem); - +not_match:if (err >0 ) {/* success */ err = count;drivers/base/dd.c +2
-8@@ -172,14 +172,8 @@ int driver_probe_done(void)* @drv: driver to bind a device to * @dev: device to try to bind to the driver * -* First, we call the bus's match function, if one present, which should -* compare the device IDs the driver supports with the device IDs of the -* device. Note we don't do this ourselves because we don't know the -* format of the ID structures, nor what is to be considered a match and -* what is not. -* -* This function returns 1 if a match is found, -ENODEV if the device is -* not registered, and 0 otherwise. +* This function returns -ENODEV if the device is not registered, +* and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well.
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 194
Quoted 5 lines
drivers/base/dd.c +0
-2@@ -190,21 +184,22 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)if (!device_is_registered (dev))return -ENODEV ; -if (drv->bus->match && !drv->bus->match (dev, drv)) - goto done;
Previously, if no .match() was specified, the normal probing has been called.
Quoted 7 lines
drivers/base/dd.c +0
-1pr_debug ("bus: '%s': %s: matched device %s with driver %s\n" , drv->bus->name, __func__,dev_name (dev), drv->name); ret =really_probe (dev, drv); -done:
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 202
Quoted 10 lines
drivers/base/dd.c +4
-0return ret; }static int __device_attach (struct device_driver *drv,void *data) {struct device *dev = data; + +if (!driver_match_device (drv, dev)) +return 0 ; +
Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
Quoted 38 lines
drivers/base/dd.c +1
-1return driver_probe_device (drv, dev); }@@ -257,7 +252,7 @@ static int __driver_attach(struct device *dev, void *data)* is an error. */ -if (drv->bus->match && !drv->bus->match (dev, drv)) +if (!driver_match_device (drv, dev))return 0 ;if (dev->parent)/* Needed for USB */ include/linux/device.h +6
-0@@ -466,6 +466,12 @@ static inline int device_is_registered(struct device *dev)return dev->kobj.state_in_sysfs; } +static inline int driver_match_device (struct device_driver *drv, +struct device *dev) +{ +return drv->bus->match && drv->bus->match (dev, drv); +} +void driver_init (void );/* Signature · 7 lines
1.6.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
2009/3/25 Guennadi Liakhovetski <[email protected]>:
Quoted 97 lines
Hi,
this patch breaks soc-camera because of this change in behaviour:
Quoted 72 lines · On Tue, 20 Jan 2009, [email protected] wrote:
From: Ming Lei <[email protected]>
This patch moves
bus->matchout fromdriver_probe_deviceand does not hold device lock to check the match between a device and a driver.The idea has been verified by the commit
6cd495860901, which leads to a faster boot. But the commit6cd495860901has the following drawbacks: 1),only does the quick check in the path of__driver_attach->driver_probe_device, not in other paths; 2),for a matched device and driver, check the same match twice. It is a waste of cpu ,especially for some drivers with long device id table (eg. usb-storage driver).This patch adds a helper of
driver_match_deviceto check the match in all paths, and testes the match only once.Signed-off-by Ming Lei <[email protected]>---
drivers/base/bus.c | 8 +++++++-drivers/base/dd.c| 19 +++++++------------include/linux/device.h| 6 ++++++3 files changed, 20 insertions(+), 13 deletions(-)drivers/base/bus.c +6
-0@@ -199,6 +199,12 @@ static ssize_t driver_bind(struct device_driver *drv, dev = bus_find_device_by_name(bus, NULL, buf); if (dev && dev->driver == NULL) { + + if (!driver_match_device(drv, dev)) { + err = 0; + goto not_match; + } +if (
dev->parent) /* Needed for USB */down(&dev->parent->sem);down(&dev->sem);drivers/base/bus.c +1
-1@@ -206,7 +212,7 @@ static ssize_t driver_bind(struct device_driver *drv, up(&dev->sem); if (dev->parent) up(&dev->parent->sem); - +not_match: if (err > 0) { /* success */ err = count;drivers/base/dd.c +2
-8@@ -172,14 +172,8 @@ int driver_probe_done(void) * @drv: driver to bind a device to * @dev: device to try to bind to the driver * - * First, we call the bus's match function, if one present, which should - * compare the device IDs the driver supports with the device IDs of the - * device. Note we don't do this ourselves because we don't know the - * format of the ID structures, nor what is to be considered a match and - * what is not. - * - * This function returns 1 if a match is found, -ENODEV if the device is - * not registered, and 0 otherwise. + * This function returns -ENODEV if the device is not registered, + * and 0 otherwise. * * This function must be called with @dev->sem held. When called for a * USB interface, @dev->parent->sem must be held as well.drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 194
Quoted 5 lines
drivers/base/dd.c +0
-2@@ -190,21 +184,22 @@ int driver_probe_device(struct device_driver *drv, struct device *dev) if (!device_is_registered(dev)) return -ENODEV; - if (drv->bus->match && !drv->bus->match(dev, drv)) - goto done;Previously, if no .match() was specified, the normal probing has been called.
Quoted 10 lines
drivers/base/dd.c +0
-1pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); ret = really_probe(dev, drv); -done: return ret; }
Quoted 10 lines
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 202
Quoted 7 lines
drivers/base/dd.c +4
-0static int __device_attach(struct device_driver *drv, void *data) { struct device *dev = data; + + if (!driver_match_device(drv, dev)) + return 0; +Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
It is not a driver-core bug, and soc-camera should be fixed.
Quoted 46 lines
Quoted 33 lines
drivers/base/dd.c +1
-1return driver_probe_device(drv, dev); }@@ -257,7 +252,7 @@ static int __driver_attach(struct device *dev, void *data)* is an error. */ - if (drv->bus->match && !drv->bus->match(dev, drv)) + if (!driver_match_device(drv, dev)) return 0;if (
dev->parent) /* Needed for USB */include/linux/device.h +6
-1@@ -466,6 +466,12 @@ static inline int device_is_registered(struct device *dev) return dev->kobj.state_in_sysfs; } +static inline int driver_match_device (struct device_driver *drv, + struct device *dev) +{ + return drv->bus->match && drv->bus->match(dev, drv); +} + void driver_init(void); /* -- 1.6.0
Quoted 6 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
Signature · 1 line
Lei Ming
Quoted 31 lines · Ming Lei
Quoted 20 lines
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 194
Quoted 6 lines
drivers/base/dd.c +0
-2@@ -190,21 +184,22 @@ int driver_probe_device(struct device_driver *drv, struct device *dev) if (!device_is_registered(dev)) return -ENODEV; - if (drv->bus->match && !drv->bus->match(dev, drv)) - goto done;Previously, if no .match() was specified, the normal probing has been called.
Quoted 10 lines
drivers/base/dd.c +0
-1pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); ret = really_probe(dev, drv); -done: return ret; }Quoted 10 lines
drivers/base/dd.c int driver_probe_device(struct device_driver *drv, struct device *dev) · line 202
Quoted 7 lines
drivers/base/dd.c +4
-0static int __device_attach(struct device_driver *drv, void *data) { struct device *dev = data; + + if (!driver_match_device(drv, dev)) + return 0; +Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
Quoted 1 line
It is not a driver-core bug, and soc-camera should be fixed.
So, you're saying this used to be a bug and it has been fixed by this patch? Then why isn't this mentioned in the commit message? The commit text seems to suggest, that this patch shouldn't introduce any change in behaviour, but it does. So, before .match == NULL lead to .probe() being called, and now it doesn't anymore?
And in which way should soc-camera be fixed? Just provide a dummy match with just "return 1;" in it?
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
include/linux/device.h +0
-0@@ -466,6 +466,12 @@ static inline int device_is_registered(struct device *dev) return dev->kobj.state_in_sysfs; }
Quoted 7 lines
Quoted 7 lines
include/linux/device.h static inline int device_is_registered(struct device *dev) · line 475
Quoted 7 lines
include/linux/device.h +6
-0+static inline int driver_match_device (struct device_driver *drv, + struct device *dev) +{ + return drv->bus->match && drv->bus->match(dev, drv); +} + void driver_init(void);
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
Quoted 10 lines
Quoted 4 lines
Quoted 2 lines
Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
It is not a driver-core bug, and soc-camera should be fixed.
So, you're saying this used to be a bug and it has been fixed by this patch? Then why isn't this mentioned in the commit message? The commit text seems to suggest, that this patch shouldn't introduce any change in behaviour, but it does. So, before .match == NULL lead to .probe() being called, and now it doesn't anymore?
Where is soc-camera driver in kernel tree? Which bus is soc-camera device (driver) attached to ?
Why doesn't soc-camera driver have a match method?
Thanks!
Signature · 1 line
Lei Ming
Quoted 5 lines · Ming Lei
Quoted 5 lines
Quoted 4 lines
Quoted 2 lines
Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
It is not a driver-core bug, and soc-camera should be fixed.
Quoted 7 lines
Quoted 5 lines
So, you're saying this used to be a bug and it has been fixed by this patch? Then why isn't this mentioned in the commit message? The commit text seems to suggest, that this patch shouldn't introduce any change in behaviour, but it does. So, before .match == NULL lead to .probe() being called, and now it doesn't anymore?
Where is soc-camera driver in kernel tree?
drivers/media/video/soc_camera.c
Quoted 1 line
Which bus is soc-camera device (driver) attached to ?
camera bus.
Quoted 1 line
Why doesn't soc-camera driver have a match method?
Why should it? Because there is only one driver on this bus by definition (and I only register a device on the bus when I find a match between a device and its parent / driver).
What I in any case see wrong with this patch, is that it _silently_ changes kernel behaviour without even mentioning it in the commit log!
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
2009/3/25 Guennadi Liakhovetski <[email protected]>:
Quoted 19 lines · Ming Lei
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
It is not a driver-core bug, and soc-camera should be fixed.
Quoted 7 lines
Quoted 5 lines
So, you're saying this used to be a bug and it has been fixed by this patch? Then why isn't this mentioned in the commit message? The commit text seems to suggest, that this patch shouldn't introduce any change in behaviour, but it does. So, before .match == NULL lead to .probe() being called, and now it doesn't anymore?
Where is soc-camera driver in kernel tree?
drivers/media/video/soc_camera.cQuoted 1 line
Which bus is soc-camera device (driver) attached to ?
Quoted 7 lines
camera bus.
Quoted 1 line
Why doesn't soc-camera driver have a match method?
Why should it? Because there is only one driver on this bus by definition (and I only register a device on the bus when I find a match between a device and its parent / driver).
I grep the drivers directory ( grep -r -n -I -A 5 -w "struct bus_type" ./* ) and
find soc-camera is the __only__ bus-type which have not implemented match method, so it is better to define a match method(always return true) in soc-camera
to solve the problem, OK?
Also, I will submit a patch to warn absence of match (maybe should return failed)
in bus_register().
Quoted 3 lines
What I in any case see wrong with this patch, is that it _silently_ changes kernel behaviour without even mentioning it in the commit log!
IMHO, the change should be reasonable, but it is missed carelessly in commit log.
Thanks
Quoted 7 lines
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
Signature · 1 line
Lei Ming
2009/3/25 Ming Lei <[email protected]>:
Quoted 24 lines
2009/3/25 Guennadi Liakhovetski <[email protected]>:
Quoted 23 lines · Ming Lei
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
Now, without .match() no probing is done. Is this an intended change and soc-camera has to be fixed or is this a bug?
It is not a driver-core bug, and soc-camera should be fixed.
Quoted 7 lines
Quoted 5 lines
So, you're saying this used to be a bug and it has been fixed by this patch? Then why isn't this mentioned in the commit message? The commit text seems to suggest, that this patch shouldn't introduce any change in behaviour, but it does. So, before .match == NULL lead to .probe() being called, and now it doesn't anymore?
Where is soc-camera driver in kernel tree?
drivers/media/video/soc_camera.cQuoted 1 line
Which bus is soc-camera device (driver) attached to ?
camera bus.
Quoted 1 line
Why doesn't soc-camera driver have a match method?
Quoted 7 lines
Quoted 3 lines
Why should it? Because there is only one driver on this bus by definition (and I only register a device on the bus when I find a match between a device and its parent / driver).
I grep the drivers directory ( grep -r -n -I -A 5 -w "struct
bus_type" ./* ) and
find soc-camera is the__only__bus-type which have not implemented match
Sorry, under arch and sound, there are some instances of bus_type defined, and few of them ( two or three ) do not have a .match method. So it is better to not change previous driver core behaviour and allow .probe called if bus->match not defined.
I'll submit a patch to fix it ,and you need not to fix your soc-camera.
Thanks.
Quoted 30 lines
method, so it is better to define a match method(always return true) in soc-camera
to solve the problem, OK?Also, I will submit a patch to warn absence of match (maybe should return failed)
inbus_register().Quoted 3 lines
What I in any case see wrong with this patch, is that it _silently_ changes kernel behaviour without even mentioning it in the commit log!
IMHO, the change should be reasonable, but it is missed carelessly in commit log.
Thanks
Quoted 7 lines
Thanks
Guennadi
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer--
Lei Ming
Signature · 1 line
Lei Ming