ath9k: Set TSF fix
PATCH 1/1 ath9k: Set TSF fix
It seems that some Atheros hardware more like this code for setting the=
TSF.
---
diff -urN wireless-testing.orig/drivers/net/wireless/ath9k/hw.c wireles= s-testing/drivers/net/wireless/ath9k/hw.c
--- wireless-testing.orig/drivers/net/wireless/ath9k/hw.c 2009-01-23 22=
:54:08.000000000 +0100
+++ wireless-testing/drivers/net/wireless/ath9k/hw.c 2009-01-24 08:47:4=
5.000000000 +0100
@@ -3736,9 +3736,8 @@
=20
void ath9k_hw_settsf64(struct ath_hal *ah, u64 tsf64)
{
- REG_WRITE(ah, AR_TSF_L32, 0x00000000);
- REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
REG_WRITE(ah, AR_TSF_L32, tsf64 & 0xffffffff);
+ REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
}
=20
void ath9k_hw_reset_tsf(struct ath_hal *ah)
--=20
NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL=20 f=FCr nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=3DOM.AD.PD003K11308T4=
569a
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 1 line · Alina Friedrichsen
It seems that some Atheros hardware more like this code for setting the TSF.
Why don't you back that claim by something more substantial?
johannes
Quoted 4 lines · Johannes Berg
Quoted 1 line · Alina Friedrichsen
It seems that some Atheros hardware more like this code for setting the TSF.
Why don't you back that claim by something more substantial?
Yeah, at *least* which hardware likes it better, and some regression testing to ensure that other hardware doesn't break with the change.
Dan
Hallo Dan!
Quoted 3 lines
Quoted 1 line
Why don't you back that claim by something more substantial?
=20
Yeah, at *least* which hardware likes it better,
The old version I have taken from an several years old madwifi patch. I= t works only with old ath5k hardware. With my new Atheros-Cards the low= er 32 bits of the TSF are only set to zero, not set to the new value. T= he new code does work with all my ath5k and ath9k cards.
Quoted 2 lines
and some regression
testing to ensure that other hardware doesn't break with the change.
This does break nothing, because it's only debugging code, which I have=
submitted a few day ago, and is not used for any other things.
By the way the TSF in ath5k is completely broken. I'm looking with this=
patch for the reasons...
Regards
Alina
--=20
Psssst! Schon vom neuen GMX MultiMessenger geh=F6rt? Der kann`s mit all=
en: http://www.gmx.net/de/go/multimessenger
--=20
NUR NOCH BIS 31.01.! GMX FreeDSL - Telefonanschluss + DSL=20 f=FCr nur 16,37 EURO/mtl.!* http://dsl.gmx.de/?ac=3DOM.AD.PD003K11308T4=
569a
--
To unsubscribe from this list: send the line "unsubscribe linux-wireles= s" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 1 line · Alina Friedrichsen
Hallo Dan!
Uhm.. Dan was not on To: or Cc: field.. Anyway..
Quoted 1 line
The old version I have taken from an several years old madwifi patch. It works only with old ath5k hardware. With my new Atheros-Cards the lower 32 bits of the TSF are only set to zero, not set to the new value. The new code does work with all my ath5k and ath9k cards.
The proposed ath9k change looks fine. The AR_TSF_L32 write does not actually change TSF and hardware will just store the value temporarily. The actual change is started by writing the AR_TSF_U32.
It looks like there are some corner cases where the TSF may not actually change if it is being updated (e.g., a Beacon is received) or we are waking up from sleep mode etc., but I would hope they do not matter too much with this debugging need.
Signature · 1 line
Jouni Malinen PGP id EFC895FA