Skip to contentSkip to conversation

hsmmc: Add MMC3 support

PATCH In review Grazvydas Ignotas 3 participants 3 messages Jan 27, 2009 – Feb 20, 2009

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hsmmc: Add MMC3 support

Device connected to MMC3 is assumed to be self-powered, so set_power() function is empty. It can't be omited because host driver requires it. Array size for hsmmc[] is specified because hsmmc[2].name is needed for MMC3 name.

Also fix a leak which happens if invalid controller id is passed.

---
This patch applies on top of David Brownel's recent 2 patches.

 arch/arm/mach-omap2/board-omap3pandora.c |    6 ++++++
 arch/arm/mach-omap2/mmc-twl4030.c        |   18 ++++++++++++++++--
 2 files changed, 22 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/board-omap3pandora.c +6 -0
index 2637641..6c1e8fe 100644
@@ -159,6 +159,12 @@ static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
 		.ext_clock	= 1,
 		.transceiver	= true,
 	},
+	{
+		.mmc		= 3,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
 	{}	/* Terminator */
 };
 
arch/arm/mach-omap2/mmc-twl4030.c +16 -2
index b45135e..3b98948 100644
@@ -61,7 +61,7 @@ static struct twl_mmc_controller {
 	u8		twl_vmmc_dev_grp;
 	u8		twl_mmc_dedicated;
 	char		name[HSMMC_NAME_LEN];
-} hsmmc[] = {
+} hsmmc[OMAP34XX_NR_MMC] = {
 	{
 		.twl_vmmc_dev_grp		= VMMC1_DEV_GRP,
 		.twl_mmc_dedicated		= VMMC1_DEDICATED,
@@ -346,6 +346,15 @@ static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vd
 	return ret;
 }
 
+static int twl_mmc3_set_power(struct device *dev, int slot, int power_on, int vdd)
+{
+	/*
+	 * Assume MMC3 has self-powered device connected, for example on-board
+	 * chip with external power source.
+	 */
+	return 0;
+}
+
 static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
 
 void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
@@ -413,7 +422,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 
 		/* NOTE:  we assume OMAP's MMC1 and MMC2 use
 		 * the TWL4030's VMMC1 and VMMC2, respectively;
-		 * and that OMAP's MMC3 isn't used.
+		 * and that MMC3 device has it's own power source.
 		 */
 
 		switch (c->mmc) {
@@ -428,8 +437,13 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			else
 				mmc->slots[0].ocr_mask = MMC_VDD_165_195;
 			break;
+		case 3:
+			mmc->slots[0].set_power = twl_mmc3_set_power;
+			mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
+			kfree(mmc);
 			continue;
 		}
 		hsmmc_data[c->mmc - 1] = mmc;
Signature · 1 line
1.5.6.3
#1 lore raw
Quoted 4 lines · Grazvydas Ignotas

Device connected to MMC3 is assumed to be self-powered, so set_power() function is empty. It can't be omited because host driver requires it. Array size for hsmmc[] is specified because hsmmc[2].name is needed for MMC3 name.

Just for the record ... this should eventually be handled using the regulator framework, which will also help with the decoupling of hsmmc setup from twl4030 setup.

So for example if a given slot is hooked up to an SDIO chip with a hard-wired 3v3 supply (Pandora MMC3, and Overo MMC2) then it'd have a fixed voltage regulator; and the HSMMC driver would just use that. (It would get a "can't do that" error on disable though.)

- Dave

Quoted 7 lines

Also fix a leak which happens if invalid controller id is passed.

---
This patch applies on top of David Brownell's recent 2 patches.

maintainer
#2 lore raw
Quoted 10 lines · David Brownell
Quoted 4 lines · Grazvydas Ignotas

Device connected to MMC3 is assumed to be self-powered, so set_power() function is empty. It can't be omited because host driver requires it. Array size for hsmmc[] is specified because hsmmc[2].name is needed for MMC3 name.

Just for the record ... this should eventually be handled using the regulator framework, which will also help with the decoupling of hsmmc setup from twl4030 setup.

Quoted 5 lines

So for example if a given slot is hooked up to an SDIO chip with a hard-wired 3v3 supply (Pandora MMC3, and Overo MMC2) then it'd have a fixed voltage regulator; and the HSMMC driver would just use that. (It would get a "can't do that" error on disable though.)

Adding to omap3-upstream and pushing to linux-omap.

Tony