Added base pnx833x stb225 board support.
PATCH 1/1 Added base pnx833x stb225 board support.
This patch adds support for PNX833X STB225 board with some kernel
patches: serial UART, Ethernet, and basic processor flavor functionality.
Signed-off-by Ihar Hrachyshka <[email protected]>
--- conf/machine/stb225.conf | 8 + packages/linux/linux-2.6.28/stb225/defconfig | 1247 ++++++++++++++++ packages/linux/linux-2.6.28/stb225/ebase-fix.patch | 37 + .../linux/linux-2.6.28/stb225/enable-uart.patch | 13 + packages/linux/linux-2.6.28/stb225/ip3902.patch | 1549 ++++++++++++++++++++ packages/linux/linux_2.6.28.bb | 6 + 6 files changed, 2860 insertions(+), 0 deletions(-) create mode 100644 conf/machine/stb225.conf create mode 100644 packages/linux/linux-2.6.28/stb225/defconfig create mode 100644 packages/linux/linux-2.6.28/stb225/ebase-fix.patch create mode 100644 packages/linux/linux-2.6.28/stb225/enable-uart.patch create mode 100644 packages/linux/linux-2.6.28/stb225/ip3902.patch
conf/machine/stb225.conf new file +8 -0
@@ -0,0 +1,8 @@ +# PNX8335 STB225 board +TARGET_ARCH = "mipsel" +TARGET_CC_ARCH="-march=mips32" +MACHINE_FEATURES = "kernel26" +IMAGE_FSTYPES="tar.gz" +PREFERRED_PROVIDER_virtual/kernel="linux" +KERNEL_IMAGETYPE="vmlinux" +KERNEL_OUTPUT="${KERNEL_IMAGETYPE}"
packages/linux/linux-2.6.28/stb225/defconfig new file +1247 -0
1,247 lines not on this page · raw message
packages/linux/linux-2.6.28/stb225/ebase-fix.patch new file +37 -0
@@ -0,0 +1,37 @@ +diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c +index f6083c6..b3bcd3a 100644 +--- a/arch/mips/kernel/traps.c ++++ b/arch/mips/kernel/traps.c +@@ -1592,8 +1592,6 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr, + #ifdef CONFIG_64BIT + unsigned long uncached_ebase = TO_UNCAC(ebase); + #endif +- if (cpu_has_mips_r2) +- ebase += (read_c0_ebase() & 0x3ffff000); + + if (!addr) + panic(panic_null_cerr); +@@ -1629,8 +1627,6 @@ void __init trap_init(void) + ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); + else { + ebase = CAC_BASE; +- if (cpu_has_mips_r2) +- ebase += (read_c0_ebase() & 0x3ffff000); + } + + per_cpu_trap_init(); +@@ -1739,11 +1735,11 @@ void __init trap_init(void) + + if (cpu_has_vce) + /* Special exception: R4[04]00 uses also the divec space. */ +- memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100); ++ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_r4000, 0x100); + else if (cpu_has_4kex) +- memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80); ++ memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80); + else +- memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80); ++ memcpy((void *)(CAC_BASE + 0x080), &except_vec3_generic, 0x80); + + signal_init(); + #ifdef CONFIG_MIPS32_COMPAT
packages/linux/linux-2.6.28/stb225/enable-uart.patch new file +13 -0
@@ -0,0 +1,13 @@ +diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig +index 3e525e3..91d4470 100644 +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE + + config SERIAL_PNX8XXX + bool "Enable PNX8XXX SoCs' UART Support" +- depends on MIPS && SOC_PNX8550 ++ depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) + select SERIAL_CORE + help + If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
packages/linux/linux-2.6.28/stb225/ip3902.patch new file +1549 -0
1,549 lines not on this page · raw message
packages/linux/linux_2.6.28.bb +6 -0
@@ -6,6 +6,7 @@ PR = "r1" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_at91sam9263ek = "28" +DEFAULT_PREFERENCE_stb225 = "28" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 \ file://defconfig"
@@ -13,3 +14,8 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 \ SRC_URI_append_at91sam9263ek = " \ file://linux-2.6.28-at91.patch.bz2;patch=1 \ file://linux-2.6.28-exp.patch.bz2;patch=1 " + +SRC_URI_append_stb225 = " \ + file://ebase-fix.patch;patch=1 \ + file://enable-uart.patch;patch=1 \ + file://ip3902.patch;patch=1 "
Signature · 1 line
1.5.6.3
Quoted 15 lines · Ihar Hrachyshka
This patch adds support for PNX833X STB225 board with some kernel
patches: serial UART, Ethernet, and basic processor flavor functionality.Signed-off-by Ihar Hrachyshka<[email protected]>--- conf/machine/stb225.conf | 8 +conf/machine/stb225.conf new file +0
-0
conf/machine/stb225.conf line 8
Quoted 8 lines
conf/machine/stb225.conf new file +8
-0@@ -0,0 +1,8 @@ +# PNX8335 STB225 board +TARGET_ARCH = "mipsel" +TARGET_CC_ARCH="-march=mips32" +MACHINE_FEATURES = "kernel26" +IMAGE_FSTYPES="tar.gz" +PREFERRED_PROVIDER_virtual/kernel="linux" +KERNEL_IMAGETYPE="vmlinux" +KERNEL_OUTPUT="${KERNEL_IMAGETYPE}"
Could you make this look more like other recipes? E.g. using a tune file for the cpu part, use += for IMAGE_FSTYPES, have spaces around equeal signs, etc? The kernel part looks ok, though.
regards,
Koen