Skip to contentSkip to conversation

driver core: remove polling for driver_probe_done

PATCH In review [email protected] 2 participants 5 messages Jan 29, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 driver core: remove polling for driver_probe_done

From: Ming Lei <[email protected]>

This patch renames driver_probe_done to driver_probe_wait_done, and make it wait on condition variable of probe done to remove polling for it in fs initialization.

Removing polling in fs initialization may lead to a faster boot.

---
 drivers/base/dd.c      |   12 +++++-------
 include/linux/device.h |    2 +-
 init/do_mounts.c       |   10 +++++-----
 init/do_mounts_md.c    |    5 +++--
 4 files changed, 14 insertions(+), 15 deletions(-)
drivers/base/dd.c +5 -7
index 9b721d3..ee998ca 100644
@@ -153,18 +153,16 @@ done:
 }
 
 /**
- * driver_probe_done
- * Determine if the probe sequence is finished or not.
+ * driver_probe_wait_done
+ * wait the probe sequence to be finished.
  *
- * Should somehow figure out how to use a semaphore, not an atomic variable...
  */
-int driver_probe_done(void)
+void driver_probe_wait_done(void)
 {
 	pr_debug("%s: probe_count = %d\n", __func__,
 		 atomic_read(&probe_count));
-	if (atomic_read(&probe_count))
-		return -EBUSY;
-	return 0;
+
+	wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
 }
 
 /**
include/linux/device.h +1 -1
index 45e5b19..20b50c4 100644
@@ -146,7 +146,7 @@ extern struct device_driver *get_driver(struct device_driver *drv);
 extern void put_driver(struct device_driver *drv);
 extern struct device_driver *driver_find(const char *name,
 					 struct bus_type *bus);
-extern int driver_probe_done(void);
+extern void driver_probe_wait_done(void);
 
 /* sysfs interface for exporting driver attributes */
 
init/do_mounts.c +5 -5
index 708105e..ce46c38 100644
@@ -371,8 +371,8 @@ void __init prepare_namespace(void)
 	}
 
 	/* wait for the known devices to complete their probing */
-	while (driver_probe_done() != 0)
-		msleep(100);
+	driver_probe_wait_done();
+
 	async_synchronize_full();
 
 	md_run_setup();
@@ -396,9 +396,9 @@ void __init prepare_namespace(void)
 	if ((ROOT_DEV == 0) && root_wait) {
 		printk(KERN_INFO "Waiting for root device %s...\n",
 			saved_root_name);
-		while (driver_probe_done() != 0 ||
-			(ROOT_DEV = name_to_dev_t(saved_root_name)) == 0)
-			msleep(100);
+		ROOT_DEV = name_to_dev_t(saved_root_name);
+		if (ROOT_DEV)
+			driver_probe_wait_done();
 	}
 
 	is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
init/do_mounts_md.c +3 -2
index ff95e31..e9a4e54 100644
@@ -281,8 +281,9 @@ static void __init autodetect_raid(void)
 	 */
 	printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
 	printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
-	while (driver_probe_done() < 0)
-		msleep(100);
+
+	driver_probe_wait_done();
+
 	fd = sys_open("/dev/md0", 0, 0);
 	if (fd >= 0) {
 		sys_ioctl(fd, RAID_AUTORUN, raid_autopart);
Signature · 1 line
1.6.0
#1 lore raw
Quoted 6 lines · On Thu, 29 Jan 2009 23:15:10 +0800 [email protected] wrote:

From: Ming Lei <[email protected]>

This patch renames driver_probe_done to driver_probe_wait_done, and make it wait on condition variable of probe done to remove polling for it in fs initialization.

I do not see where you add the wake_up() for waking up the wait queue... .... are you sure this is going to work ?

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
author
#2 lore raw

2009/1/29 Arjan van de Ven <[email protected]>:

Quoted 5 lines
Quoted 2 lines · On Thu, 29 Jan 2009 23:15:10 +0800 [email protected] wrote:

From: Ming Lei <[email protected]>

Quoted 7 lines
Quoted 4 lines

This patch renames driver_probe_done to driver_probe_wait_done, and make it wait on condition variable of probe done to remove polling for it in fs initialization.

I do not see where you add the wake_up() for waking up the wait queue... .... are you sure this is going to work ?

really_probe always wake up the queue of probe_waitqueue, but no one pend on it. This patch adds the waitting on the queue.

static int really_probe(struct device *dev, struct device_driver *drv) {
...
done:

        atomic_dec(&probe_count);
        wake_up(&probe_waitqueue);
        return ret;

}

Quoted 6 lines

--
Arjan van de Ven Intel Open Source Technology Centre
For development, discussion and tips for power savings, visit http://www.lesswatts.org

Signature · 1 line
Lei Ming
#3 lore raw
In reply to [email protected]

init/do_mounts.c void __init prepare_namespace(void) · line 404

Quoted 13 lines
init/do_mounts.c +3 -3
@@ -396,9 +396,9 @@ void __init prepare_namespace(void)
 	if ((ROOT_DEV == 0) && root_wait) {
 		printk(KERN_INFO "Waiting for root device %s...\n",
 			saved_root_name);
-		while (driver_probe_done() != 0 ||
-			(ROOT_DEV = name_to_dev_t(saved_root_name))
 == 0)
-			msleep(100);
+		ROOT_DEV = name_to_dev_t(saved_root_name);
+		if (ROOT_DEV)
+			driver_probe_wait_done();
 	}
 

Hi,

another comment:

this is not equivalent

you turned "wait until all probing is done OR until the device exists" into "wait until all probing is done"... which might be several seconds longer!

author
#4 lore raw

2009/1/29 Arjan van de Ven <[email protected]>:

Quoted 16 lines

init/do_mounts.c void __init prepare_namespace(void) · line 404

Quoted 13 lines
init/do_mounts.c +3 -3
@@ -396,9 +396,9 @@ void __init prepare_namespace(void)
      if ((ROOT_DEV == 0) && root_wait) {
              printk(KERN_INFO "Waiting for root device %s...\n",
                      saved_root_name);
-             while (driver_probe_done() != 0 ||
-                     (ROOT_DEV = name_to_dev_t(saved_root_name))
 == 0)
-                     msleep(100);
+             ROOT_DEV = name_to_dev_t(saved_root_name);
+             if (ROOT_DEV)
+                     driver_probe_wait_done();
      }
 

Hi,

Quoted 7 lines

another comment:

this is not equivalent

you turned "wait until all probing is done OR until the device exists" into "wait until all probing is done"... which might be several seconds longer!

Yes, you are right. I will consider how to fix the problem. Thanks.

Quoted 1 line
Signature · 1 line
Lei Ming