Skip to contentSkip to conversation

Is my xen hosting tech support misleading me?

linux-lvm Shachar Or 3 participants 4 messages Feb 3, 2009 – Feb 8, 2009

lore
Share & tools
lore

Shachar Or

author
#0 lore raw

Hello.

Attached is a question I've asked my xen hosting provider's technical support and the answer they've supplied.

Sam sais "There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources." but I've no problem loading dm_mod and to my understanding of LVM, this is the only module needed. So is he just wrong?

Thanks.

Hello,

Thank you for your patience.

There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources.

You will then need to activate the module.

You should be able to find the appropriate help online.

I am at your disposal should you need any further information.

Best regards,
Sam

---------------------------------------
Are you satisfied with the quality of the reply you received?
YES: http://www.gandi.net/faq/feedback/yes
NO: http://www.gandi.net/faq/feedback/no

I would like to give more detailed feedback: http://www.gandi.net/faq/feedback
---------------------------------------

Signature · 33 lines
Help about hosting / aide sur l'h�bergement: http://wiki.gandi.net/

GANDI
http://www.gandi.net


--------------------------------------
Product     : hosting
Category    : 
Question    : 
FirstName   : Shachar
LastName    : Or
CompanyName : 
Email       : [email protected]
Domain      : 
DomainNB    : 
Handle      : SO866-GANDI
Anciennet  : 
Transaction : 
Message     : Hello.

This is a technical question about a problem I'm experiencing with LVM on my virtual server.

The issue is that logical volumes are not activated on bootup. This prevents me from using /etc/fstab to mount them.

root@shacharor:~# lvdisplay | grep 'LV Status' && udevtrigger && udevsettle && lvdisplay | grep 'LV Status'
  LV Status              NOT available
  LV Status              available
root@shacharor:~#

This shows that udev handles logical volumes correctly and does activate them. But why doesn't it do it on bootup?

Thanks.
#1 lore raw
Quoted 9 lines · Shachar Or

Hello.

Attached is a question I've asked my xen hosting provider's technical support and the answer they've supplied.

Sam sais "There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources." but I've no problem loading dm_mod and to my understanding of LVM, this is the only module needed. So is he just wrong?

Probably, however your going to need to find out if you have the entire dm_* family for the functionality that you want (i.e. snapshots). You should (on your VM) simply be able to install lvm2 via yum, apt-get or whatever packaging mechanism is provided by your distribution.

I use lvm2 on literally hundreds of paravirtualized Xen guests without a problem.

A word of warning, don't make LV's (or their snapshots) a prerequisite to boot .. since you have no control over your initrd. If your provider has given you xvda and xvdb , use xvdb for your pv, keep the root file system on xvda.

Cheers,
--Tim

Quoted 77 lines

Thanks.
email message attachment, "הודעה מועברת - <Ref1876314> DOMAIN :"

Quoted 59 lines

-------- Forwarded Message --------
From: Gandi Hosting <[email protected]>
To: [email protected]
Subject: <Ref1876314> DOMAIN :
Date: Mon, 2 Feb 2009 15:09:28 +0100 (CET)

Hello,

Thank you for your patience.

There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources.

You will then need to activate the module.

You should be able to find the appropriate help online.

I am at your disposal should you need any further information.

Best regards,
Sam

---------------------------------------
Are you satisfied with the quality of the reply you received?
YES: http://www.gandi.net/faq/feedback/yes
NO: http://www.gandi.net/faq/feedback/no

I would like to give more detailed feedback:
http://www.gandi.net/faq/feedback
---------------------------------------

Help about hosting / aide sur l'hébergement: http://wiki.gandi.net/

GANDI
http://www.gandi.net

--------------------------------------

Product     : hosting 
Category    :  
Question    :  
FirstName   : Shachar 
LastName    : Or 
CompanyName :  
Email       : [email protected] 
Domain      :  
DomainNB    :  
Handle      : SO866-GANDI 

Anciennet :
Transaction :
Message : Hello.

This is a technical question about a problem I'm experiencing with LVM on my virtual server.

The issue is that logical volumes are not activated on bootup. This prevents me from using /etc/fstab to mount them.

Quoted 10 lines
root@shacharor:~# lvdisplay | grep 'LV Status' && udevtrigger && udevsettle && lvdisplay | grep 'LV Status' 
  LV Status              NOT available 
  LV Status              available 
root@shacharor:~# 

This shows that udev handles logical volumes correctly and does activate them. But why doesn't it do it on bootup?

Thanks.

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#2 lore raw

Sorry to top post, but of course make sure the appropriate modules are loaded on boot (again, emphasis on not needing them to pivot_root) unless you have a VERY cooperative provider.

Cheers,
--Tim

Quoted 112 lines · Tim Post
Quoted 9 lines · Shachar Or

Hello.

Attached is a question I've asked my xen hosting provider's technical support and the answer they've supplied.

Sam sais "There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources." but I've no problem loading dm_mod and to my understanding of LVM, this is the only module needed. So is he just wrong?

Probably, however your going to need to find out if you have the entire dm_* family for the functionality that you want (i.e. snapshots). You should (on your VM) simply be able to install lvm2 via yum, apt-get or whatever packaging mechanism is provided by your distribution.

I use lvm2 on literally hundreds of paravirtualized Xen guests without a problem.

A word of warning, don't make LV's (or their snapshots) a prerequisite to boot .. since you have no control over your initrd. If your provider has given you xvda and xvdb , use xvdb for your pv, keep the root file system on xvda.

Cheers,
--Tim

Quoted 69 lines

Thanks.
email message attachment, "הודעה מועברת - <Ref1876314> DOMAIN :"

Quoted 66 lines

-------- Forwarded Message --------
From: Gandi Hosting <[email protected]>
To: [email protected]
Subject: <Ref1876314> DOMAIN :
Date: Mon, 2 Feb 2009 15:09:28 +0100 (CET)

Hello,

Thank you for your patience.

There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources.

You will then need to activate the module.

You should be able to find the appropriate help online.

I am at your disposal should you need any further information.

Best regards,
Sam

---------------------------------------
Are you satisfied with the quality of the reply you received?
YES: http://www.gandi.net/faq/feedback/yes
NO: http://www.gandi.net/faq/feedback/no

I would like to give more detailed feedback:
http://www.gandi.net/faq/feedback
---------------------------------------

Help about hosting / aide sur l'hébergement: http://wiki.gandi.net/

GANDI
http://www.gandi.net

--------------------------------------

Product     : hosting 
Category    :  
Question    :  
FirstName   : Shachar 
LastName    : Or 
CompanyName :  
Email       : [email protected] 
Domain      :  
DomainNB    :  
Handle      : SO866-GANDI 

Anciennet :
Transaction :
Message : Hello.

This is a technical question about a problem I'm experiencing with LVM on my virtual server.

The issue is that logical volumes are not activated on bootup. This prevents me from using /etc/fstab to mount them.

root@shacharor:~# lvdisplay | grep 'LV Status' && udevtrigger && udevsettle && lvdisplay | grep 'LV Status' 
  LV Status              NOT available 
  LV Status              available 
root@shacharor:~# 

This shows that udev handles logical volumes correctly and does activate them. But why doesn't it do it on bootup?

Quoted 8 lines
Quoted 3 lines

Thanks.

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

#3 lore raw
In reply to Shachar Or
Quoted 7 lines

Attached is a question I've asked my xen hosting provider's technical support and the answer they've supplied.

Sam sais "There is no LVM module available, so you would need to compile LVM by yourself from the Xen kernel sources." but I've no problem loading dm_mod and to my understanding of LVM, this is the only module needed. So is he just wrong?

If you're able to activate the volumes after the system has booted (which the discussion below suggests), then the device-mapper modules would already be available so there's no need to compile anything.

Quoted 8 lines

The issue is that logical volumes are not activated on bootup. This prevents me from using /etc/fstab to mount them.

root@shacharor:~# lvdisplay | grep 'LV Status' && udevtrigger && udevsettle && lvdisplay | grep 'LV Status'
  LV Status              NOT available
  LV Status              available
root@shacharor:~#

This shows that udev handles logical volumes correctly and does activate them. But why doesn't it do it on bootup?

If the volumes aren't created at boot time you're probably missing the relevant stuff in your initial ram disk... usually, if you're root fs is on an LVM volume, the ram disk would contain the relevant dm_* kernel modules and a script that (amongst other things) loads the relevant kernel modules and activates the volumes. Your simplest solution may be to just add "vgscan --mknodes" and "vgchange -ay" to rc.local (its uglier than fixing the initrd, but you may not be able to recreate the initrd in your situation).

--Dave