Skip to contentSkip to conversation

qemu block changes: keep backing file format v3

PATCH RESEND In review Uri Lublin 3 participants 6 messages Feb 10, 2009 – Feb 16, 2009

lore
Share & tools
lore

Uri Lublin

author
#0 lore raw

cover qemu block changes: keep backing file format v3

This is another implementation for keeping a backing file format, such that we would not need probing to figure it out.

This time I introduce qcow2 extensions which can be used in the future.
I using one such an extension to keeping the backing file format, and use it when opening a file.

Qcow2 extensions are build of magic (id) len (in bytes) and data. They reside between the end of the header and the filename.

We keep the backing file format in a such a qcow2 extension, to
1. Provide a way to know the backing file format without probing it (setting the format at creation time).
2. Enable using qcow2 format over host block devices.
(only if the user specifically asks for it, by providing the format at creation time).

I've added bdrv_create2 and drv->bdrv_create2 (implemented only by block-qcow2 currently) to pass the backing-format to create.

Based on a work done by Shahar Frank.

Also fixes a security flaw found by Daniel P. Berrange on [1] which summarizes: "Autoprobing: just say no."

[1] http://lists.gnu.org/archive/html/qemu-devel/2008-12/msg01083.html

First patch implements qcow2 extensions + bdrv_create2 Second patch modifies qemu-img such that the user can use it.

Currently this is implemented only for qcow2, but touches code in some block*.[ch] files. An alternative that touches only block-qcow2.c is possible, but will need to change the implementation of -snapshot, and call bdrv_open2 directly from qcow_open (to open the backing file).

Please review,
Thanks,
Uri.

author
#1 lore raw

PATCH RESEND 1/2 Introducing qcow2 extensions + keep backing file format

Qcow2 extensions are build of magic (id) len (in bytes) and data. They reside between the end of the header and the filename.

We can keep the backing file format in a such a qcow2 extension, to
1. Provide a way to know the backing file format without probing it (setting the format at creation time).
2. Enable using qcow2 format over host block devices.
(only if the user specifically asks for it, by providing the format at creation time).

I've added bdrv_create2 and drv->bdrv_create2 (implemented only by block-qcow2 currently) to pass the backing-format to create.

Based on a work done by Shahar Frank.

Also fixes a security flaw found by Daniel P. Berrange on [1] which summarizes: "Autoprobing: just say no."

[1] http://lists.gnu.org/archive/html/qemu-devel/2008-12/msg01083.html

---
 block-qcow2.c |  115 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 block.c       |   29 +++++++++++++-
 block.h       |    4 ++
 block_int.h   |    6 +++
 4 files changed, 149 insertions(+), 5 deletions(-)
block-qcow2.c +113 -2
index 8a5b621..d2263d5 100644
@@ -45,6 +45,7 @@
 
 //#define DEBUG_ALLOC
 //#define DEBUG_ALLOC2
+//#define DEBUG_EXT
 
 #define QCOW_MAGIC (('Q' << 24) | ('F' << 16) | ('I' << 8) | 0xfb)
 #define QCOW_VERSION 2
@@ -77,6 +78,21 @@ typedef struct QCowHeader {
     uint64_t snapshots_offset;
 } QCowHeader;
 
+
+typedef struct {
+    /* 
+     *  Alternatives:
+     *    should I make them uint64_t ?
+     *    should I add version ?
+     *    should I use a single magic and add type field ?
+     *    should I keep number-of-extenstions ?
+     */
+    uint32_t magic;
+    uint32_t len;
+} QCowExtension;
+#define  QCOW_EXT_MAGIC_END 0
+#define  QCOW_EXT_MAGIC_BACKING_FORMAT 0xE2792ACA
+
 typedef struct __attribute__((packed)) QCowSnapshotHeader {
     /* header is 8 byte aligned */
     uint64_t l1_table_offset;
@@ -189,6 +205,66 @@ static int qcow_probe(const uint8_t *buf, int buf_size, const char *filename)
         return 0;
 }
 
+
+/* read qcow2 extension and fill bs
+ * start reading from start_offset
+ * finish reading upon magic of value 0 or when end_offset reached
+ * unknown magic is skipped (future extension this version knows nothing about)
+ * return 0 upon success, non-0 otherwise
+ */
+static int qcow_read_extensions(BlockDriverState *bs, uint64_t start_offset, 
+                                uint64_t end_offset)
+{
+    BDRVQcowState *s = bs->opaque;
+    QCowExtension ext;
+    uint64_t offset;
+
+#ifdef DEBUG_EXT
+    printf("qcow_read_extensions: start=%ld end=%ld\n", start_offset, end_offset);
+#endif
+    offset = start_offset;
+    while (offset < end_offset) {
+
+#ifdef DEBUG_EXT
+        /* Sanity check */
+        if (offset >= s->cluster_size)
+            printf("qcow_handle_extension: suspicious offset %lu\n", offset);
+
+        printf("attemting to read extended header in offset %lu\n", offset);
+#endif
+
+        if (bdrv_pread(s->hd, offset, &ext, sizeof(ext)) != sizeof(ext)) {
+            fprintf(stderr, "qcow_handle_extension: ERROR: pread fail from offset %lu\n",
+                    offset);
+            return 1;
+        }
+        be32_to_cpus(&ext.magic);
+        be32_to_cpus(&ext.len);
+        offset += sizeof(ext);
+        switch (ext.magic) {
+        case QCOW_EXT_MAGIC_END:
+            break;
+        case QCOW_EXT_MAGIC_BACKING_FORMAT:
+            if (ext.len >= sizeof(bs->backing_format)) {
+                fprintf(stderr, "ERROR: ext_backing_format: len=%u too large"
+                        " (>=%lu)\n",
+                        ext.len, sizeof(bs->backing_format));
+                return 2;
+            }
+            if (bdrv_pread(s->hd, offset , bs->backing_format, 
+                           ext.len) != ext.len)
+                return 3;
+            bs->backing_format[ext.len] = '\0';
+#ifdef DEBUG_EXT
+            printf("Qcow2: Got format extension %s\n", bs->backing_format);
+#endif
+            offset += ((ext.len + 7) & ~7);
+        }
+    }
+
+    return 0;
+}
+
 static int qcow_open(BlockDriverState *bs, const char *filename, int flags)
 {
     BDRVQcowState *s = bs->opaque;
@@ -286,6 +362,10 @@ static int qcow_open(BlockDriverState *bs, const char *filename, int flags)
 
     scan_refcount(bs, &s->highest_alloc, &s->nc_free);
 
+    /* read qcow2 extensions */
+    if (qcow_read_extensions(bs, sizeof(header), header.backing_file_offset))
+        goto fail;
+
     /* read the backing file name */
     if (header.backing_file_offset != 0) {
         len = header.backing_file_size;
@@ -1477,13 +1557,17 @@ static void create_refcount_update(QCowCreateState *s,
     }
 }
 
-static int qcow_create(const char *filename, int64_t total_size,
-                      const char *backing_file, int flags)
+static int qcow_create2(const char *filename, int64_t total_size,
+                        const char *backing_file, const char *backing_format,
+                        int flags)
 {
     int fd, header_size, backing_filename_len, l1_size, i, shift, l2_bits;
+    int backing_format_len = 0;
     QCowHeader header;
     uint64_t tmp, offset;
     QCowCreateState s1, *s = &s1;
+    QCowExtension ext = {0, 0};
+
 
     memset(s, 0, sizeof(*s));
 
@@ -1497,6 +1581,12 @@ static int qcow_create(const char *filename, int64_t total_size,
     header_size = sizeof(header);
     backing_filename_len = 0;
     if (backing_file) {
+        if (backing_format) {
+            ext.magic = QCOW_EXT_MAGIC_BACKING_FORMAT;
+            backing_format_len = strlen(backing_format);
+            ext.len = (backing_format_len + 7) & ~7;
+            header_size += ((sizeof(ext) + ext.len + 7) & ~7);
+        }
         header.backing_file_offset = cpu_to_be64(header_size);
         backing_filename_len = strlen(backing_file);
         header.backing_file_size = cpu_to_be32(backing_filename_len);
@@ -1545,6 +1635,19 @@ static int qcow_create(const char *filename, int64_t total_size,
     /* write all the data */
     write(fd, &header, sizeof(header));
     if (backing_file) {
+        if (backing_format_len) {
+            char zero[16];
+            int d = ext.len - backing_format_len;
+
+            memset(zero, 0, sizeof(zero));
+            cpu_to_be32s(&ext.magic);
+            cpu_to_be32s(&ext.len);
+            write(fd, &ext, sizeof(ext));
+            write(fd, backing_format, backing_format_len);
+            if (d>0) {
+                write(fd, zero, d);
+            }
+        }
         write(fd, backing_file, backing_filename_len);
     }
     lseek(fd, s->l1_table_offset, SEEK_SET);
@@ -1569,6 +1672,12 @@ static int qcow_create(const char *filename, int64_t total_size,
     return -ENOMEM;
 }
 
+static int qcow_create(const char *filename, int64_t total_size,
+                       const char *backing_file, int flags)
+{
+    return qcow_create2(filename, total_size, backing_file, NULL, flags);
+}
+
 static int qcow_make_empty(BlockDriverState *bs)
 {
 #if 0
@@ -2726,4 +2835,6 @@ BlockDriver bdrv_qcow2 = {
     .bdrv_snapshot_delete = qcow_snapshot_delete,
     .bdrv_snapshot_list = qcow_snapshot_list,
     .bdrv_get_info = qcow_get_info,
+
+    .bdrv_create2 = qcow_create2,
 };
block.c +26 -3
index b3d2f12..368948c 100644
@@ -174,6 +174,20 @@ BlockDriver *bdrv_find_format(const char *format_name)
     return NULL;
 }
 
+int bdrv_create2(BlockDriver *drv,
+                const char *filename, int64_t size_in_sectors,
+                const char *backing_file, const char *backing_format,
+                int flags)
+{
+    if (drv->bdrv_create2)
+        return drv->bdrv_create2(filename, size_in_sectors, backing_file, 
+                                 backing_format, flags);
+    if (drv->bdrv_create)
+        return drv->bdrv_create(filename, size_in_sectors, backing_file,
+                                flags);
+    return -ENOTSUP;        
+}
+
 int bdrv_create(BlockDriver *drv,
                 const char *filename, int64_t size_in_sectors,
                 const char *backing_file, int flags)
@@ -350,6 +364,9 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
 
         /* if there is a backing file, use it */
         bs1 = bdrv_new("");
+/*         if (drv) */
+/*             pstrcpy(bs1->backing_format, sizeof(bs->backing_format), */
+/*                     drv->format_name); */
         if (!bs1) {
             return -ENOMEM;
         }
@@ -373,8 +390,10 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
         else
             realpath(filename, backing_filename);
 
-        if (bdrv_create(&bdrv_qcow2, tmp_filename,
-                        total_size, backing_filename, 0) < 0) {
+        if (bdrv_create2(&bdrv_qcow2, tmp_filename,
+                         total_size, backing_filename, 
+                         (drv ? drv->format_name : NULL),
+                         0) < 0) {
             return -1;
         }
         filename = tmp_filename;
@@ -424,6 +443,7 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
 #endif
     if (bs->backing_file[0] != '\0') {
         /* if there is a backing file, use it */
+        BlockDriver *back_drv = NULL;
         bs->backing_hd = bdrv_new("");
         if (!bs->backing_hd) {
         fail:
@@ -432,7 +452,10 @@ int bdrv_open2(BlockDriverState *bs, const char *filename, int flags,
         }
         path_combine(backing_filename, sizeof(backing_filename),
                      filename, bs->backing_file);
-        if (bdrv_open(bs->backing_hd, backing_filename, open_flags) < 0)
+        if (bs->backing_format)
+            back_drv = bdrv_find_format(bs->backing_format);
+        if (bdrv_open2(bs->backing_hd, backing_filename, open_flags,
+                       back_drv) < 0)
             goto fail;
     }
 
block.h +4 -0
index e1927dd..e19fd8f 100644
@@ -64,6 +64,10 @@ BlockDriver *bdrv_find_format(const char *format_name);
 int bdrv_create(BlockDriver *drv,
                 const char *filename, int64_t size_in_sectors,
                 const char *backing_file, int flags);
+int bdrv_create2(BlockDriver *drv,
+                 const char *filename, int64_t size_in_sectors,
+                 const char *backing_file, const char *backing_format,
+                 int flags);
 BlockDriverState *bdrv_new(const char *device_name);
 void bdrv_delete(BlockDriverState *bs);
 int bdrv_file_open(BlockDriverState **pbs, const char *filename, int flags);
block_int.h +6 -0
index e83fd2c..349f66e 100644
@@ -85,6 +85,11 @@ struct BlockDriver {
     /* to control generic scsi devices */
     int (*bdrv_ioctl)(BlockDriverState *bs, unsigned long int req, void *buf);
 
+    /* new create with backing file format */
+    int (*bdrv_create2)(const char *filename, int64_t total_sectors,
+                        const char *backing_file, const char *backing_format,
+                        int flags);
+
     BlockDriverAIOCB *free_aiocb;
     struct BlockDriver *next;
 };
@@ -107,6 +112,7 @@ struct BlockDriverState {
     char filename[1024];
     char backing_file[1024]; /* if non zero, the image is a diff of
                                 this file image */
+    char backing_format[16]; /* if non-zero and backing_file exists */
     int is_temporary;
     int media_changed;
 
Signature · 1 line
1.6.0.6
author
#2 lore raw

PATCH RESEND 2/2 qemu-img: adding a "-F base_fmt" option to "qemu-img create -b"

If the user specifies the backing file format, then when opening the backing file, there is no need to probe the (backing file) image to figure out its format.

This follows my previous patch implementing bdrv_create2 which keeps (for qcow2 only) the backing file format as a qcow2-extension

Suggested by Daniel P. Berrange.

---
 qemu-img.c    |   24 ++++++++++++++++++++----
 qemu-img.texi |    4 +++-
 2 files changed, 23 insertions(+), 5 deletions(-)
qemu-img.c +20 -4
index 6b852fb..2cb97e1 100644
@@ -25,6 +25,7 @@
 #include "osdep.h"
 #include "block_int.h"
 #include <assert.h>
+#include <stdio.h>
 
 #ifdef _WIN32
 #define WIN32_LEAN_AND_MEAN
@@ -58,7 +59,7 @@ static void help(void)
            "QEMU disk image utility\n"
            "\n"
            "Command syntax:\n"
-           "  create [-e] [-6] [-b base_image] [-f fmt] filename [size]\n"
+           "  create [-e] [-6] [-F fmt] [-b base_image] [-f fmt] filename [size]\n"
            "  commit [-f fmt] filename\n"
            "  convert [-c] [-e] [-6] [-f fmt] [-O output_fmt] [-B output_base_image] filename [filename2 [...]] output_filename\n"
            "  info [-f fmt] filename\n"
@@ -218,6 +219,7 @@ static int img_create(int argc, char **argv)
 {
     int c, ret, flags;
     const char *fmt = "raw";
+    const char *base_fmt = NULL;
     const char *filename;
     const char *base_filename = NULL;
     uint64_t size;
@@ -226,13 +228,16 @@ static int img_create(int argc, char **argv)
 
     flags = 0;
     for(;;) {
-        c = getopt(argc, argv, "b:f:he6");
+        c = getopt(argc, argv, "F:b:f:he6");
         if (c == -1)
             break;
         switch(c) {
         case 'h':
             help();
             break;
+        case 'F':
+            base_fmt = optarg;
+            break;
         case 'b':
             base_filename = optarg;
             break;
@@ -253,7 +258,15 @@ static int img_create(int argc, char **argv)
     size = 0;
     if (base_filename) {
         BlockDriverState *bs;
-        bs = bdrv_new_open(base_filename, NULL);
+        BlockDriver *base_drv = NULL;
+        
+        if (base_fmt) {
+            base_drv = bdrv_find_format(base_fmt);
+            if (base_drv == NULL)
+                error("Unknown basefile format '%s'", base_fmt);
+        }
+        
+        bs = bdrv_new_open(base_filename, base_fmt);
         bdrv_get_geometry(bs, &size);
         size *= 512;
         bdrv_delete(bs);
@@ -284,9 +297,12 @@ static int img_create(int argc, char **argv)
     if (base_filename) {
         printf(", backing_file=%s",
                base_filename);
+         if (base_fmt)
+             printf(", backing_fmt=%s",
+                    base_fmt);
     }
     printf(", size=%" PRIu64 " kB\n", size / 1024);
-    ret = bdrv_create(drv, filename, size / 512, base_filename, flags);
+    ret = bdrv_create2(drv, filename, size / 512, base_filename, base_fmt, flags);
     if (ret < 0) {
         if (ret == -ENOTSUP) {
             error("Formatting or formatting option not supported for file format '%s'", fmt);
qemu-img.texi +3 -1
index a40f841..deef2ab 100644
@@ -8,7 +8,7 @@ usage: qemu-img command [command options]
 
 The following commands are supported:
 @table @option
-@item create [-e] [-6] [-b @var{base_image}] [-f @var{fmt}] @var{filename} [@var{size}]
+@item create [-e] [-6] [-F @var{base_fmt}] [-b @var{base_image}] [-f @var{fmt}] @var{filename} [@var{size}]
 @item commit [-f @var{fmt}] @var{filename}
 @item convert [-c] [-e] [-6] [-f @var{fmt}] [-O @var{output_fmt}] [-B @var{output_base_image}] @var{filename} [@var{filename2} [...]] @var{output_filename}
 @item info [-f @var{fmt}] @var{filename}
@@ -27,6 +27,8 @@ forces the output image to be created as a copy on write
 image of the specified base image; @code{output_base_image} should have the same
 content as the input's base image, however the path, image format, etc may
 differ
+@item base_fmt
+is the disk image format of @var{base_image}. for more information look at @var{fmt}
 @item fmt
 is the disk image format. It is guessed automatically in most cases. The following formats are supported:
 
Signature · 1 line
1.6.0.6
#3 lore raw

[Qemu-devel] Re: [RESEND][PATCH 1/2] Introducing qcow2 extensions + keep backing file format

In reply to Uri Lublin
Quoted 44 lines · Uri Lublin

Qcow2 extensions are build of magic (id) len (in bytes) and data. They reside between the end of the header and the filename.

We can keep the backing file format in a such a qcow2 extension, to
1. Provide a way to know the backing file format without probing it (setting the format at creation time).
2. Enable using qcow2 format over host block devices.
(only if the user specifically asks for it, by providing the format at creation time).

I've added bdrv_create2 and drv->bdrv_create2 (implemented only by block-qcow2 currently) to pass the backing-format to create.

Based on a work done by Shahar Frank.

Also fixes a security flaw found by Daniel P. Berrange on [1] which summarizes: "Autoprobing: just say no."

[1] http://lists.gnu.org/archive/html/qemu-devel/2008-12/msg01083.html

---
 block-qcow2.c |  115 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 block.c       |   29 +++++++++++++-
 block.h       |    4 ++
 block_int.h   |    6 +++
 4 files changed, 149 insertions(+), 5 deletions(-)
block-qcow2.c +1 -0
index 8a5b621..d2263d5 100644
@@ -45,6 +45,7 @@
 
 //#define DEBUG_ALLOC
 //#define DEBUG_ALLOC2
+//#define DEBUG_EXT
 
 #define QCOW_MAGIC (('Q' << 24) | ('F' << 16) | ('I' << 8) | 0xfb)
 #define QCOW_VERSION 2
@@ -77,6 +78,21 @@ typedef struct QCowHeader {
     uint64_t snapshots_offset;
 } QCowHeader;
 

block-qcow2.c typedef struct QCowHeader { · line 90

Quoted 10 lines
block-qcow2.c +9 -0
+
+typedef struct {
+    /* 
+     *  Alternatives:
+     *    should I make them uint64_t ?
+     *    should I add version ?
+     *    should I use a single magic and add type field ?
+     *    should I keep number-of-extenstions ?
+     */
 

What you have is fine. You should remove these comments though.

Quoted 11 lines
block-qcow2.c +6 -0
+    uint32_t magic;
+    uint32_t len;
+} QCowExtension;
+#define  QCOW_EXT_MAGIC_END 0
+#define  QCOW_EXT_MAGIC_BACKING_FORMAT 0xE2792ACA
+
 typedef struct __attribute__((packed)) QCowSnapshotHeader {
     /* header is 8 byte aligned */
     uint64_t l1_table_offset;
block-qcow2.c +0 -0
@@ -189,6 +205,66 @@ static int qcow_probe(const uint8_t *buf, int buf_size, const char *filename)
         return 0;

block-qcow2.c static int qcow_probe(const uint8_t *buf, int buf_size, const char *filename) · line 215

Quoted 10 lines
block-qcow2.c +7 -0
 }
 
+
+/* read qcow2 extension and fill bs
+ * start reading from start_offset
+ * finish reading upon magic of value 0 or when end_offset reached
+ * unknown magic is skipped (future extension this version knows nothing about)
+ * return 0 upon success, non-0 otherwise
+ */
 

So, if this falls after the header but before the backing name, and you need to find a '0, 0' combination to terminate the list, are we guaranteed that all old qcow2 files are going to be parsed correctly? Can't a backing file name start immediately after the header?

Regards,

Anthony Liguori

author
#4 lore raw

[Qemu-devel] Re: [RESEND][PATCH 1/2] Introducing qcow2 extensions + keep backing file format

Quoted 46 lines · Anthony Liguori
Quoted 45 lines · Uri Lublin

Qcow2 extensions are build of magic (id) len (in bytes) and data. They reside between the end of the header and the filename.

We can keep the backing file format in a such a qcow2 extension, to
1. Provide a way to know the backing file format without probing it (setting the format at creation time).
2. Enable using qcow2 format over host block devices.
(only if the user specifically asks for it, by providing the format at creation time).

I've added bdrv_create2 and drv->bdrv_create2 (implemented only by block-qcow2 currently) to pass the backing-format to create.

Based on a work done by Shahar Frank.

Also fixes a security flaw found by Daniel P. Berrange on [1] which summarizes: "Autoprobing: just say no."

[1] http://lists.gnu.org/archive/html/qemu-devel/2008-12/msg01083.html

---
 block-qcow2.c |  115 
++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 block.c       |   29 +++++++++++++-
 block.h       |    4 ++
 block_int.h   |    6 +++
 4 files changed, 149 insertions(+), 5 deletions(-)
block-qcow2.c +1 -0
index 8a5b621..d2263d5 100644
@@ -45,6 +45,7 @@
 
 //#define DEBUG_ALLOC
 //#define DEBUG_ALLOC2
+//#define DEBUG_EXT
 
 #define QCOW_MAGIC (('Q' << 24) | ('F' << 16) | ('I' << 8) | 0xfb)
 #define QCOW_VERSION 2
@@ -77,6 +78,21 @@ typedef struct QCowHeader {
     uint64_t snapshots_offset;
 } QCowHeader;
 
Quoted 11 lines

block-qcow2.c typedef struct QCowHeader {

Quoted 9 lines
block-qcow2.c +8 -0
+
+typedef struct {
+    /* +     *  Alternatives:
+     *    should I make them uint64_t ?
+     *    should I add version ?
+     *    should I use a single magic and add type field ?
+     *    should I keep number-of-extenstions ?
+     */
 

What you have is fine. You should remove these comments though.

O.K. I'll remove those comments.

Quoted 15 lines
Quoted 15 lines
block-qcow2.c +6 -0
+    uint32_t magic;
+    uint32_t len;
+} QCowExtension;
+#define  QCOW_EXT_MAGIC_END 0
+#define  QCOW_EXT_MAGIC_BACKING_FORMAT 0xE2792ACA
+
 typedef struct __attribute__((packed)) QCowSnapshotHeader {
     /* header is 8 byte aligned */
     uint64_t l1_table_offset;
@@ -189,6 +205,66 @@ static int qcow_probe(const uint8_t *buf, int 
 buf_size, const char *filename)
         return 0;
 }
 
Quoted 11 lines

block-qcow2.c static int qcow_probe(const uint8_t *buf, int buf_size, const char *filename)

Quoted 9 lines
block-qcow2.c +7 -0
+
+/* read qcow2 extension and fill bs
+ * start reading from start_offset
+ * finish reading upon magic of value 0 or when end_offset reached
+ * unknown magic is skipped (future extension this version knows 
 nothing about)
+ * return 0 upon success, non-0 otherwise
+ */
 

So, if this falls after the header but before the backing name, and you need to find a '0, 0' combination to terminate the list, are we guaranteed that all old qcow2 files are going to be parsed correctly?

We are searching till one of the following conditions reached:
1. magic of value 0 or
2. end_offset reached (which is really the offset of the backing file name).

If you find it confusing, I can probably drop the first condition (which was added as a sanity check). Also note that I'm ignoring unknown extensions (assumed to be written in the future), so magic of 0 will be skipped anyway.

Quoted 1 line

Can't a backing file name start immediately after the header?

It can. In that case the search will be over immediately,
since start_offset == end_offset (end-of-qcow2-header == offset-of-backing-file-name).

Thanks,
Uri.

#5 lore raw

Re: [Qemu-devel] Re: [RESEND][PATCH 1/2] Introducing qcow2 extensions + keep backing file format

Quoted 6 lines · Uri Lublin
Quoted 3 lines · Anthony Liguori

Uri Lublin wrote:

Can't a backing file name start immediately after the header?

It can. In that case the search will be over immediately,
since start_offset == end_offset (end-of-qcow2-header == offset-of-backing-file-name).

Okay, that makes more sense. It's obvious now but for some reason, I just wasn't thinking of that.

Regards,

Anthony Liguori

Quoted 4 lines

Thanks,
Uri.