powerpc: Add support for using doorbells for SMP IPI
PATCH 1/1 powerpc: Add support for using doorbells for SMP IPI
The e500mc supports the new msgsnd/doorbell mechanisms that were added in the Power ISA 2.05 architecture. We use the normal level doorbell for doing SMP IPIs at this point.
--- arch/powerpc/include/asm/cputable.h | 4 ++- arch/powerpc/include/asm/dbell.h | 43 +++++++++++++++++++++++++++++++++ arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/dbell.c | 44 ++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/head_fsl_booke.S | 6 ++++- arch/powerpc/kernel/traps.c | 21 ++++++++++++++++ 6 files changed, 117 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/include/asm/dbell.h create mode 100644 arch/powerpc/kernel/dbell.c
arch/powerpc/include/asm/cputable.h +3 -1
@@ -145,6 +145,7 @@ extern const char *powerpc_base_platform;#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)#define CPU_FTR_601 ASM_CONST(0x0000000000000100) +#define CPU_FTR_DBELL ASM_CONST(0x0000000000000200)#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800)#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000)
@@ -373,7 +374,8 @@ extern const char *powerpc_base_platform; CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE) + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL)#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)/* 64-bit CPUs */
arch/powerpc/include/asm/dbell.h new file +43 -0
43 lines not on this page · raw message
arch/powerpc/kernel/Makefile +1 -1
@@ -61,7 +61,7 @@ obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o +obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o
arch/powerpc/kernel/dbell.c new file +44 -0
44 lines not on this page · raw message
arch/powerpc/kernel/head_fsl_booke.S +5 -1
@@ -698,7 +698,9 @@ interrupt_base: /* Performance Monitor */ EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) - EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD) + + CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception) /* Debug Interrupt */ DEBUG_DEBUG_EXCEPTION
@@ -921,6 +923,8 @@ _GLOBAL(__setup_e500mc_ivors) mtspr SPRN_IVOR35,r3 li r3,Doorbell@l mtspr SPRN_IVOR36,r3 + li r3,CriticalDoorbell@l + mtspr SPRN_IVOR37,r3 sync blr
arch/powerpc/kernel/traps.c +21 -0
@@ -53,6 +53,9 @@#endif #include <asm/kexec.h> #include <asm/ppc-opcode.h> +#ifdef CONFIG_FSL_BOOKE +#include <asm/dbell.h> +#endif #if defined(CONFIG_DEBUGGER ) || defined(CONFIG_KEXEC )int (*__debugger)(struct pt_regs *regs);
@@ -1122,6 +1125,24 @@ void vsx_assist_exception(struct pt_regs *regs)#endif /* CONFIG_VSX */ #ifdef CONFIG_FSL_BOOKE + +void doorbell_exception (struct pt_regs *regs) +{ +#ifdef CONFIG_SMP +int cpu =smp_processor_id (); +int msg; + +if (num_online_cpus () <2 ) +return ; + +for (msg =0 ; msg <4 ; msg++) +if (test_and_clear_bit (msg, &dbell_smp_message[cpu])) +smp_message_recv (msg); +#else +printk (KERN_WARNING "Received doorbell on non-smp system\n" ); +#endif +} +void CacheLockingException (struct pt_regs *regs,unsigned long address,unsigned long error_code) {
Signature · 1 line
1.5.6.6
Quoted 4 lines · Kumar Gala
The e500mc supports the new msgsnd/doorbell mechanisms that were added in the Power ISA 2.05 architecture. We use the normal level doorbell for doing SMP IPIs at this point.
Cool stuff. Haven't reviewed in details yet tho :-) But I was thinking...
We should introduce a special xmon variant of local_irq_save/restore for use by xmon that masks MSR:CE and use a crit doorbell for xmon IPI, that would increase significantly the ability of xmon to catch deadlocked CPUs, and we could use external CRITs as a more generic way of doing IPIs, no ?
In fact, we should expose a local_crit_irq_save/restore (disable/enable) too for things like watchdog drivers etc... which may want to use these.
Cheers,
Ben.
Quoted 6 lines · Benjamin Herrenschmidt
Quoted 4 lines · Kumar Gala
The e500mc supports the new msgsnd/doorbell mechanisms that were added in the Power ISA 2.05 architecture. We use the normal level doorbell for doing SMP IPIs at this point.
Quoted 8 lines
Cool stuff. Haven't reviewed in details yet tho :-) But I was thinking...
We should introduce a special xmon variant of local_irq_save/restore for use by xmon that masks MSR:CE and use a crit doorbell for xmon IPI, that would increase significantly the ability of xmon to catch deadlocked CPUs, and we could use external CRITs as a more generic way of doing IPIs, no ?
crit doorbell for xmon IPI sounds interesting. However, I don't following about use of external CRITs for IPIs.
Quoted 2 lines
In fact, we should expose a local_crit_irq_save/restore (disable/enable) too for things like watchdog drivers etc... which may want to use these.
Yeah, probably a good thing for us to add.
- k
Quoted 3 lines
crit doorbell for xmon IPI sounds interesting. However, I don't following about use of external CRITs for IPIs.
Just a finger not following the brain :-) I meant for NMI's
Cheers,
Ben.
Quoted 3 lines · Kumar Gala
The e500mc supports the new msgsnd/doorbell mechanisms that were added in the Power ISA 2.05 architecture. We use the normal level doorbell for doing SMP IPIs at this point.
Any reason why you don't use the tag ? I'm not too familiar with the doorbell stuff just yet but can't you use that instead of doing those atomics ?
On thing we also need to look at is change our low level msg send to take a CPU mask.
This will be better generically and we need a good cpu mask based IPI for the TLB stuff anyway. Volunteer ? :-)
Cheers,
Ben.
Quoted 209 lines
Signed-off-by Kumar Gala <[email protected]>--- arch/powerpc/include/asm/cputable.h | 4 ++- arch/powerpc/include/asm/dbell.h | 43 +++++++++++++++++++++++++++++++++ arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/dbell.c | 44 ++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/head_fsl_booke.S | 6 ++++- arch/powerpc/kernel/traps.c | 21 ++++++++++++++++ 6 files changed, 117 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/include/asm/dbell.h create mode 100644 arch/powerpc/kernel/dbell.carch/powerpc/include/asm/cputable.h +3
-1@@ -145,6 +145,7 @@ extern const char *powerpc_base_platform;#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)#define CPU_FTR_601 ASM_CONST(0x0000000000000100) +#define CPU_FTR_DBELL ASM_CONST(0x0000000000000200)#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800)#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000)@@ -373,7 +374,8 @@ extern const char *powerpc_base_platform; CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE) + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL)#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)/* 64-bit CPUs */ arch/powerpc/include/asm/dbell.h new file +43
-0@@ -0,0 +1,43 @@ +/* +* Copyright 2009 Freescale Semicondutor, Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +* +* provides masks and opcode images for use by code generation, emulation +* and for instructions that older assemblers might not know about +*/ +#ifndef _ASM_POWERPC_DBELL_H +#define _ASM_POWERPC_DBELL_H + +#include <linux/smp.h> +#include <linux/threads.h> + +#include <asm/ppc-opcode.h> + +#define PPC_DBELL_MSG_BRDCAST (0x04000000) +#define PPC_DBELL_TYPE (x) (((x) & 0xf) << 28) +enum ppc_dbell { +PPC_DBELL =0 ,/* doorbell */ +PPC_DBELL_CRIT =1 ,/* critical doorbell */ +PPC_G_DBELL =2 ,/* guest doorbell */ +PPC_G_DBELL_CRIT =3 ,/* guest critical doorbell */ +PPC_G_DBELL_MC =4 ,/* guest mcheck doorbell */ +}; + +#ifdef CONFIG_SMP +extern unsigned long dbell_smp_message[NR_CPUS ]; +extern void smp_dbell_message_pass (int target,int msg); +#endif + +static inline void ppc_msgsnd (enum ppc_dbell type,u32 flags,u32 tag) +{ +u32 msg =PPC_DBELL_TYPE (type) | (flags &PPC_DBELL_MSG_BRDCAST ) | + (tag &0x07ffffff ); + + __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); +} + +#endif /* _ASM_POWERPC_DBELL_H */ arch/powerpc/kernel/Makefile +1
-1@@ -61,7 +61,7 @@ obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o +obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.o extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.oarch/powerpc/kernel/dbell.c new file +44
-0@@ -0,0 +1,44 @@ +/* +* Author: Kumar Gala <[email protected]> +* +* Copyright 2009 Freescale Semiconductor Inc. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/threads.h> + +#include <asm/dbell.h> + +#ifdef CONFIG_SMP +unsigned long dbell_smp_message[NR_CPUS ]; + +void smp_dbell_message_pass (int target,int msg) +{ +int i; + +if (target <NR_CPUS ) { +set_bit (msg, &dbell_smp_message[target]); +ppc_msgsnd (PPC_DBELL ,0 , target); + } +else if (target ==MSG_ALL_BUT_SELF ) { +for_each_online_cpu (i) { +if (i ==smp_processor_id ()) +continue ; +set_bit (msg, &dbell_smp_message[i]); +ppc_msgsnd (PPC_DBELL ,0 , i); + } + } +else {/* target == MSG_ALL */ +for_each_online_cpu (i) +set_bit (msg, &dbell_smp_message[i]); +ppc_msgsnd (PPC_DBELL ,PPC_DBELL_MSG_BRDCAST ,0 ); + } +} +#endif arch/powerpc/kernel/head_fsl_booke.S +5
-1@@ -698,7 +698,9 @@ interrupt_base: /* Performance Monitor */ EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) - EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD) + + CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception) /* Debug Interrupt */ DEBUG_DEBUG_EXCEPTION@@ -921,6 +923,8 @@ _GLOBAL(__setup_e500mc_ivors) mtspr SPRN_IVOR35,r3 li r3,Doorbell@l mtspr SPRN_IVOR36,r3 + li r3,CriticalDoorbell@l + mtspr SPRN_IVOR37,r3 sync blrarch/powerpc/kernel/traps.c +21
-0@@ -53,6 +53,9 @@#endif #include <asm/kexec.h> #include <asm/ppc-opcode.h> +#ifdef CONFIG_FSL_BOOKE +#include <asm/dbell.h> +#endif #if defined(CONFIG_DEBUGGER ) || defined(CONFIG_KEXEC )int (*__debugger)(struct pt_regs *regs);@@ -1122,6 +1125,24 @@ void vsx_assist_exception(struct pt_regs *regs)#endif /* CONFIG_VSX */ #ifdef CONFIG_FSL_BOOKE + +void doorbell_exception (struct pt_regs *regs) +{ +#ifdef CONFIG_SMP +int cpu =smp_processor_id (); +int msg; + +if (num_online_cpus () <2 ) +return ; + +for (msg =0 ; msg <4 ; msg++) +if (test_and_clear_bit (msg, &dbell_smp_message[cpu])) +smp_message_recv (msg); +#else +printk (KERN_WARNING "Received doorbell on non-smp system\n" ); +#endif +} +void CacheLockingException (struct pt_regs *regs,unsigned long address,unsigned long error_code) {
Quoted 8 lines · Benjamin Herrenschmidt
Quoted 3 lines · Kumar Gala
The e500mc supports the new msgsnd/doorbell mechanisms that were added in the Power ISA 2.05 architecture. We use the normal level doorbell for doing SMP IPIs at this point.
Any reason why you don't use the tag ? I'm not too familiar with the doorbell stuff just yet but can't you use that instead of doing those atomics ?
tag just conveys the type of doorbell (normal, critical, etc.). So for the 4 IPI msgs we support we need software to keep track.
Quoted 5 lines
On thing we also need to look at is change our low level msg send to take a CPU mask.
This will be better generically and we need a good cpu mask based IPI for the TLB stuff anyway. Volunteer ? :-)
yeah.. It something on the list :)
- k
Quoted 218 lines
Quoted 218 lines
Signed-off-by Kumar Gala <[email protected]>---
arch/powerpc/include/asm/cputable.h| 4 ++-arch/powerpc/include/asm/dbell.h| 43 ++++++++++++++++++++++++
+++++++++arch/powerpc/kernel/Makefile| 2 +-arch/powerpc/kernel/dbell.c| 44 ++++++++++++++++++++++++
++++++++++arch/powerpc/kernel/head_fsl_booke.S| 6 ++++-arch/powerpc/kernel/traps.c| 21 ++++++++++++++++6 files changed, 117 insertions(+), 3 deletions(-)create mode 100644
arch/powerpc/include/asm/dbell.hcreate mode 100644arch/powerpc/kernel/dbell.carch/powerpc/include/asm/cputable.h +3
-1@@ -145,6 +145,7 @@ extern const char *powerpc_base_platform;#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)#define CPU_FTR_601 ASM_CONST(0x0000000000000100) +#define CPU_FTR_DBELL ASM_CONST(0x0000000000000200)#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800)#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000)@@ -373,7 +374,8 @@ extern const char *powerpc_base_platform; CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \ - CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE) + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL)#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)/* 64-bit CPUs */ arch/powerpc/include/asm/dbell.h new file +9
-0@@ -0,0 +1,43 @@ +/* +* Copyright 2009 Freescale Semicondutor, Inc. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* as published by the Free Software Foundation; either version +* 2 of the License, or (at your option) any later version. +* +* provides masks and opcode images for use by code generation, emulation
+ * and for instructions that older assemblers might not know about
+ */arch/powerpc/include/asm/dbell.h new file +24
-0+#ifndef _ASM_POWERPC_DBELL_H +#define _ASM_POWERPC_DBELL_H + +#include <linux/smp.h> +#include <linux/threads.h> + +#include <asm/ppc-opcode.h> + +#define PPC_DBELL_MSG_BRDCAST (0x04000000) +#define PPC_DBELL_TYPE (x) (((x) & 0xf) << 28) +enum ppc_dbell { +PPC_DBELL =0 ,/* doorbell */ +PPC_DBELL_CRIT =1 ,/* critical doorbell */ +PPC_G_DBELL =2 ,/* guest doorbell */ +PPC_G_DBELL_CRIT =3 ,/* guest critical doorbell */ +PPC_G_DBELL_MC =4 ,/* guest mcheck doorbell */ +}; + +#ifdef CONFIG_SMP +extern unsigned long dbell_smp_message[NR_CPUS ]; +extern void smp_dbell_message_pass (int target,int msg); +#endif + +static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32tag)
arch/powerpc/include/asm/dbell.h new file +8
-0+{ +u32 msg =PPC_DBELL_TYPE (type) | (flags &PPC_DBELL_MSG_BRDCAST ) | + (tag &0x07ffffff ); + + __asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg)); +} + +#endif /* _ASM_POWERPC_DBELL_H */ arch/powerpc/kernel/Makefile +0
-0@@ -61,7 +61,7 @@ obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x) += cpu_setup_44x.oarch/powerpc/kernel/Makefile +1
-1-obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o +obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o dbell.oextra-$(CONFIG_PPC_STD_MMU) := head_32.o
extra-$(CONFIG_PPC64) := head_64.oarch/powerpc/kernel/dbell.c new file +6
-0@@ -0,0 +1,44 @@ +/* +* Author: Kumar Gala <[email protected]> +* +* Copyright 2009 Freescale Semiconductor Inc. +* +* This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */arch/powerpc/kernel/dbell.c new file +34
-0+ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/threads.h> + +#include <asm/dbell.h> + +#ifdef CONFIG_SMP +unsigned long dbell_smp_message[NR_CPUS ]; + +void smp_dbell_message_pass (int target,int msg) +{ +int i; + +if (target <NR_CPUS ) { +set_bit (msg, &dbell_smp_message[target]); +ppc_msgsnd (PPC_DBELL ,0 , target); + } +else if (target ==MSG_ALL_BUT_SELF ) { +for_each_online_cpu (i) { +if (i ==smp_processor_id ()) +continue ; +set_bit (msg, &dbell_smp_message[i]); +ppc_msgsnd (PPC_DBELL ,0 , i); + } + } +else {/* target == MSG_ALL */ +for_each_online_cpu (i) +set_bit (msg, &dbell_smp_message[i]); +ppc_msgsnd (PPC_DBELL ,PPC_DBELL_MSG_BRDCAST ,0 ); + } +} +#endif arch/powerpc/kernel/head_fsl_booke.S +3
-1@@ -698,7 +698,9 @@ interrupt_base: /* Performance Monitor */ EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) - EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD) + EXCEPTION(0x2070, Doorbell, doorbell_exception, EXC_XFER_STD) + + CRITICAL_EXCEPTION(0x2080, CriticalDoorbell, unknown_exception) /* Debug Interrupt */
DEBUG_DEBUG_EXCEPTIONarch/powerpc/kernel/head_fsl_booke.S +2
-0@@ -921,6 +923,8 @@ _GLOBAL(__setup_e500mc_ivors) mtspr SPRN_IVOR35,r3 li r3,Doorbell@l mtspr SPRN_IVOR36,r3 + li r3,CriticalDoorbell@l + mtspr SPRN_IVOR37,r3 sync blrarch/powerpc/kernel/traps.c +21
-0@@ -53,6 +53,9 @@#endif #include <asm/kexec.h> #include <asm/ppc-opcode.h> +#ifdef CONFIG_FSL_BOOKE +#include <asm/dbell.h> +#endif #if defined(CONFIG_DEBUGGER ) || defined(CONFIG_KEXEC )int (*__debugger)(struct pt_regs *regs);@@ -1122,6 +1125,24 @@ void vsx_assist_exception(struct pt_regs *regs)#endif /* CONFIG_VSX */ #ifdef CONFIG_FSL_BOOKE + +void doorbell_exception (struct pt_regs *regs) +{ +#ifdef CONFIG_SMP +int cpu =smp_processor_id (); +int msg; + +if (num_online_cpus () <2 ) +return ; + +for (msg =0 ; msg <4 ; msg++) +if (test_and_clear_bit (msg, &dbell_smp_message[cpu])) +smp_message_recv (msg); +#else +printk (KERN_WARNING "Received doorbell on non-smp system\n" ); +#endif +} +void CacheLockingException (struct pt_regs *regs,unsigned long address,unsigned long error_code){