Skip to contentSkip to conversation

zylonite-wm97xx: Accelerated touchscreen support for Zylonite

PATCH New Mark Brown 1 participant 2 messages Feb 13, 2009

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/2 zylonite-wm97xx: Accelerated touchscreen support for Zylonite

This patch implements accelerated touchscreen support for the Marvell Zylonite development platform, supporting pen down interrupts and continuous mode data transfers.

---
 drivers/input/touchscreen/Kconfig           |   13 ++
 drivers/input/touchscreen/Makefile          |    1 +
 drivers/input/touchscreen/zylonite-wm97xx.c |  239 +++++++++++++++++++++++++++
 3 files changed, 253 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/touchscreen/zylonite-wm97xx.c
drivers/input/touchscreen/Kconfig +13 -0
index bb6486a..a31d434 100644
@@ -308,6 +308,19 @@ config TOUCHSCREEN_WM97XX_MAINSTONE
 	  To compile this driver as a module, choose M here: the
 	  module will be called mainstone-wm97xx.
 
+config TOUCHSCREEN_WM97XX_ZYLONITE
+	tristate "Zylonite accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
+	select TOUCHSCREEN_WM9713
+	help
+	  Say Y here for support for streaming mode with the touchscreen
+	  on Zylonite systems.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zylonite-wm97xx.
+
 config TOUCHSCREEN_USB_COMPOSITE
 	tristate "USB Touchscreen Driver"
 	depends on USB_ARCH_HAS_HCD
drivers/input/touchscreen/Makefile +1 -0
index d3375af..82dd918 100644
@@ -34,3 +34,4 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
drivers/input/touchscreen/zylonite-wm97xx.c new file +239 -0

239 lines not on this page · raw message

Signature · 1 line
1.5.6.5
author
#1 lore raw

PATCH 2/2 wm97xx: add accelerated driver for AVR32 AT32AP700X microprocessors

From: Hans-Christian Egtvedt <[email protected]>

This patch adds an accelerated driver for Atmel AVR32 AT32AP700X microprocessors. It uses interrupts on the channel B in the AC97 controller. Thus, offloading the work queue in the wm97xx-ts driver.

The driver has been tested with Atmel AVR32 AT32AP7000 and Wolfson WM9712 codec.

---
 drivers/input/touchscreen/Kconfig       |   15 ++
 drivers/input/touchscreen/Makefile      |    1 +
 drivers/input/touchscreen/at32-wm97xx.c |  410 +++++++++++++++++++++++++++++++
 drivers/input/touchscreen/at32-wm97xx.h |   48 ++++
 4 files changed, 474 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/touchscreen/at32-wm97xx.c
 create mode 100644 drivers/input/touchscreen/at32-wm97xx.h
drivers/input/touchscreen/Kconfig +15 -0
index a31d434..d63fc2f 100644
@@ -296,6 +296,21 @@ config TOUCHSCREEN_WM9713
 	  Say Y here to enable support for the Wolfson Microelectronics
 	  WM9713 touchscreen controller.
 
+config TOUCHSCREEN_WM97XX_AT32
+	tristate "WM97xx Atmel AVR32 accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && AVR32
+	help
+	  Say Y here for support for streaming mode with WM97xx touchscreens on
+	  Atmel AVR32 systems with an AC97 controller.
+
+	  Be aware that this will use channel B in the controller for streaming
+	  data, this must not conflict with other AC97 drivers.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called at32-wm97xx.
+
 config TOUCHSCREEN_WM97XX_MAINSTONE
 	tristate "WM97xx Mainstone accelerated touch"
 	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
drivers/input/touchscreen/Makefile +1 -0
index 82dd918..29a0257 100644
@@ -33,5 +33,6 @@ obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
 wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_AT32)	+= at32-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
drivers/input/touchscreen/at32-wm97xx.c new file +410 -0

410 lines not on this page · raw message

drivers/input/touchscreen/at32-wm97xx.h new file +48 -0

48 lines not on this page · raw message

Signature · 1 line
1.5.6.5