Skip to contentSkip to conversation

Philips saa7131e chip on Asus

linux-dvb Kevin 2 participants 3 messages Feb 15, 2009 – Feb 17, 2009 1 message not in the archive Media (V4L/DVB)

lore
Share & tools
lore

Kevin

author
#0 lore raw

Hi, is there anyone who can please give me a hand, after months reading and trying things out, I still cannot make this work.
I have an Asus Wifi tv card which came with my P5WD2 board. This card is shown as 'Asus Tiger Analog Tv Card' in xp and works well in that os. Looking at the physical card I can see these writings on the chips and tuners (looks like it has 2) Philips saa7131E
D33005 CE4403
TN05211 SB0780 (don't know if these might help)
I am trying to make it work on Ubuntu 8.10 (32 bit) (also tried on 64 bit---nothing)
After a brand new installation and updates to the kernel source and headers, my Kernel is 2.6.27.
I also installed the latest Mercurial and also copied firmware drivers (tda10046) to the /lib/firmware folder.

lspci shows this;
01:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)

sudo lspci -v shows this
01:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
Subsystem: ASUSTeK Computer Inc. Device 818c
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at e7edb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Kernel driver in use: saa7134
Kernel modules: saa7134

The device being shown as 818c is not like any other Asus dual card I have read about.
Looks like the card is being found but it is not being autodetected, dmesg is showing it as card=0. I am manually forcing card numbers in /etc/modprobe.d/options file. I have tried all the Asus card numbers there are in the cardlist but still did not manage to scan any channel. I have only one connection to the card and it;s from cable tv.

Sorry if I took too long, tried to give as much info as possible, and please excuse me if this is the wrong place were to put this request, if it is can you kindly guide me where I may ask for help. TIA

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw

Hi Kevin,

Am Sonntag, den 15.02.2009, 11:20 +0000 schrieb Kevin:

Quoted 21 lines

Hi, is there anyone who can please give me a hand, after months reading and trying things out, I still cannot make this work.
I have an Asus Wifi tv card which came with my P5WD2 board. This card is shown as 'Asus Tiger Analog Tv Card' in xp and works well in that os. Looking at the physical card I can see these writings on the chips and tuners (looks like it has 2) Philips saa7131E
D33005 CE4403
TN05211 SB0780 (don't know if these might help)
I am trying to make it work on Ubuntu 8.10 (32 bit) (also tried on 64 bit---nothing)
After a brand new installation and updates to the kernel source and headers, my Kernel is 2.6.27.
I also installed the latest Mercurial and also copied firmware drivers (tda10046) to the /lib/firmware folder.

lspci shows this;
01:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)

sudo lspci -v shows this
01:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
Subsystem: ASUSTeK Computer Inc. Device 818c
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at e7edb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
Kernel driver in use: saa7134
Kernel modules: saa7134

Quoted 6 lines

The device being shown as 818c is not like any other Asus dual card I have read about.
Looks like the card is being found but it is not being autodetected, dmesg is showing it as card=0. I am manually forcing card numbers in /etc/modprobe.d/options file. I have tried all the Asus card numbers there are in the cardlist but still did not manage to scan any channel. I have only one connection to the card and it;s from cable tv.

Sorry if I took too long, tried to give as much info as possible, and please excuse me if this is the wrong place were to put this request, if it is can you kindly guide me where I may ask for help. TIA

unfortunately I can only confirm your observations.

We tried on this one already during the very beginning of the analog TV support for the tda8275a in October 2005, but without success.

As far I remember, the tuner finally did take all initialization sequences and should be ready for analog TV, but we never saw a "lock" on a signal reported with tuner debug=1.

My last idea on it was, that there must me at least some undiscovered antenna RF input switching, but might be wrong and even more complicated.

Should be on archives like marcs under ASUS WIFI-TV in the subject.

Can't tell, if for example regspy.exe from DScaler (deinterlace.sf.net) for gpio settings can lead any further in this case.

Cheers,
Hermann

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

Hello again,

Am Montag, den 16.02.2009, 14:19 +0000 schrieb Kevin:

Quoted 3 lines

Hi Hermann,
thanks for the clarification. I was afraid of such a reply however I wanted a confirm from the experts. Will keep monitoring the fora just in case someday a solution is found.

Kevin, sorry for the bad news so far.

That device came in very early during the first analog support for the global tda8275a, but all involved tried their best.

So, we don't have the gpio settings it uses with the other driver yet and there might be a slight chance to come something further with that.

Unfortunately this one comes only with some Asus OEM mobos, which decreases the user base hacking on it, and another eventually related problem is the WIFI wireless stuff on it.

These days we have multiple chip configurations, where likely every single one can do substantially needed switching for another one later in the row.

Asus in common keeps tracks quite well, but we have also some very different devices with the same PCI subsystem ID already we must come over by eeprom detection, not that easy if you don't know what is encoded exactly where, the chip vendor is ignored with his suggestions, even this is not public and a puzzle, and all are having fun ;)

Some seem to think right now it is only bad history these days ...

Cheers,
Hermann

Quoted 78 lines

Quoting hermann pitton <[email protected]>:

Quoted 74 lines

Hi Kevin,

Am Sonntag, den 15.02.2009, 11:20 +0000 schrieb Kevin:

Quoted 1 line

Hi, is there anyone who can please give me a hand, after months

reading and trying things out, I still cannot make this work.

Quoted 1 line

I have an Asus Wifi tv card which came with my P5WD2 board. This

card is shown as 'Asus Tiger Analog Tv Card' in xp and works well in that os. Looking at the physical card I can see these writings on the chips and tuners (looks like it has 2)

Quoted 4 lines

Philips saa7131E
D33005 CE4403
TN05211 SB0780 (don't know if these might help)
I am trying to make it work on Ubuntu 8.10 (32 bit) (also tried

on 64 bit---nothing)

Quoted 1 line

After a brand new installation and updates to the kernel source

and headers, my Kernel is 2.6.27.

Quoted 1 line

I also installed the latest Mercurial and also copied firmware

drivers (tda10046) to the /lib/firmware folder.

Quoted 3 lines

lspci shows this;
01:01.0 Multimedia controller: Philips Semiconductors

SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)

Quoted 3 lines

sudo lspci -v shows this
01:01.0 Multimedia controller: Philips Semiconductors

SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d0)

Quoted 8 lines

Subsystem: ASUSTeK Computer Inc. Device 818c
Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at e7edb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2 Kernel driver in use: saa7134
Kernel modules: saa7134

The device being shown as 818c is not like any other Asus dual

card I have read about.

Quoted 1 line

Looks like the card is being found but it is not being

autodetected, dmesg is showing it as card=0. I am manually forcing card numbers in /etc/modprobe.d/options file. I have tried all the Asus card numbers there are in the cardlist but still did not manage to scan any channel.

Quoted 3 lines

I have only one connection to the card and it;s from cable tv.

Sorry if I took too long, tried to give as much info as possible,

and please excuse me if this is the wrong place were to put this request, if it is can you kindly guide me where I may ask for help.
TIA

Quoted 1 line

unfortunately I can only confirm your observations.

We tried on this one already during the very beginning of the analog TV
support for the tda8275a in October 2005, but without success.

As far I remember, the tuner finally did take all initialization sequences and should be ready for analog TV, but we never saw a "lock"
on a signal reported with tuner debug=1.

My last idea on it was, that there must me at least some undiscovered
antenna RF input switching, but might be wrong and even more complicated.

Should be on archives like marcs under ASUS WIFI-TV in the subject.

Can't tell, if for example regspy.exe from DScaler (deinterlace.sf.net)
for gpio settings can lead any further in this case.

Cheers,
Hermann