New: mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

Bug 12733 [email protected] 2 participants 8 messages Feb 17, 2009 – Mar 19, 2009 SCSI

Share & tools

[email protected]

author

2009-02-17 23:04 UTC #0 lore raw

http://bugzilla.kernel.org/show_bug.cgi?id=12733

Summary: mpt fusion driver crashes with LSI22320SE installed and
BIOS ACPI turned off
Product: SCSI Drivers
Version: 2.5
KernelVersion: 2.6.27.5-117
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]

On a system with a Supermicro X7DWN+ with ACPI turned off, and an LSI22320SE card installed, the mptdriver will crash. (The problem appears to affect other boards as well).

Here is the relevant log:

Oct  5 21:19:54 localhost kernel: Fusion MPT SPI Host driver 3.04.07
Oct  5 21:19:54 localhost kernel: mptbase: ioc0: Initiating bringup
Oct  5 21:19:54 localhost kernel: [drm] Initialized radeon 1.29.0 20080528 on
minor 0
Oct  5 21:19:54 localhost kernel: ioc0: LSI53C1030 C0:
Capabilities={Initiator,Target}
Oct  5 21:19:54 localhost kernel: scsi2 : ioc0: LSI53C1030 C0, FwRev=01033400h,
Ports=1, MaxQ=255, IRQ=52
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating bringup
Oct  5 21:19:54 localhost kernel: ioc1: LSI53C1030 C0:
Capabilities={Initiator,Target}
Oct  5 21:19:54 localhost kernel: scsi3 : ioc1: LSI53C1030 C0, FwRev=01033400h,
Ports=1, MaxQ=255, IRQ=52
Oct  5 21:19:54 localhost kernel: device-mapper: multipath: version 1.0.5
loaded
Oct  5 21:19:54 localhost kernel: EXT3 FS on dm-0, internal journal
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting task abort!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: mptscsih: ioc1: completing
cmds: fw_channel 0, fw_id 4, sc=f5aca500, mf = f48e3160, idx=19
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: task abort: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting target reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: target reset: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting bus reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery

and

Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: bus reset: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting host reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config

failed

Signature · 3 lines

Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

James Bottomley

maintainer

2009-02-17 23:16 UTC #1 lore raw

Quoted 18 lines · On Tue, 2009-02-17 at 15:04 -0800, [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=12733
Summary: mpt fusion driver crashes with LSI22320SE installed and
BIOS ACPI turned off
Product: SCSI Drivers
Version: 2.5
KernelVersion: 2.6.27.5-117
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]

Quoted 3 lines

On a system with a Supermicro X7DWN+ with ACPI turned off, and an LSI22320SE card installed, the mptdriver will crash. (The problem appears to affect other boards as well).

The first question is can this board operate without ACPI? It's used to get the interrupt routings and your log below indicates that the driver isn't receiving the card interrupt.

Quoted 14 lines

Here is the relevant log:

Oct  5 21:19:54 localhost kernel: Fusion MPT SPI Host driver 3.04.07
Oct  5 21:19:54 localhost kernel: mptbase: ioc0: Initiating bringup
Oct  5 21:19:54 localhost kernel: [drm] Initialized radeon 1.29.0 20080528 on
minor 0
Oct  5 21:19:54 localhost kernel: ioc0: LSI53C1030 C0:
Capabilities={Initiator,Target}
Oct  5 21:19:54 localhost kernel: scsi2 : ioc0: LSI53C1030 C0, FwRev=01033400h,
Ports=1, MaxQ=255, IRQ=52
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating bringup
Oct  5 21:19:54 localhost kernel: ioc1: LSI53C1030 C0:
Capabilities={Initiator,Target}
Oct  5 21:19:54 localhost kernel: scsi3 : ioc1: LSI53C1030 C0, FwRev=01033400h,

Quoted 1 line

Ports=1, MaxQ=255, IRQ=52

Is 52 the right interrupt number?

Quoted 49 lines

Oct  5 21:19:54 localhost kernel: device-mapper: multipath: version 1.0.5
loaded
Oct  5 21:19:54 localhost kernel: EXT3 FS on dm-0, internal journal
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting task abort!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: mptscsih: ioc1: completing
cmds: fw_channel 0, fw_id 4, sc=f5aca500, mf = f48e3160, idx=19
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: task abort: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting target reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: target reset: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting bus reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery

and

Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: bus reset: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting host reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config

Quoted 1 line

failed

James

[email protected]

author

2009-02-17 23:17 UTC #2 lore raw

[Bug 12733] mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

In reply to [email protected]

http://bugzilla.kernel.org/show_bug.cgi?id=12733

------- Comment #1 from [email protected] 2009-02-17 15:16 -------
Reply-To: [email protected]

Quoted 18 lines · On Tue, 2009-02-17 at 15:04 -0800, [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=12733
Summary: mpt fusion driver crashes with LSI22320SE installed and
BIOS ACPI turned off
Product: SCSI Drivers
Version: 2.5
KernelVersion: 2.6.27.5-117
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Other
AssignedTo: [email protected]
ReportedBy: [email protected]

Quoted 3 lines

On a system with a Supermicro X7DWN+ with ACPI turned off, and an LSI22320SE card installed, the mptdriver will crash. (The problem appears to affect other boards as well).

The first question is can this board operate without ACPI? It's used to get the interrupt routings and your log below indicates that the driver isn't receiving the card interrupt.

Quoted 14 lines

Here is the relevant log:

Oct  5 21:19:54 localhost kernel: Fusion MPT SPI Host driver 3.04.07
Oct  5 21:19:54 localhost kernel: mptbase: ioc0: Initiating bringup
Oct  5 21:19:54 localhost kernel: [drm] Initialized radeon 1.29.0 20080528 on
minor 0
Oct  5 21:19:54 localhost kernel: ioc0: LSI53C1030 C0:
Capabilities={Initiator,Target}
Oct  5 21:19:54 localhost kernel: scsi2 : ioc0: LSI53C1030 C0, FwRev=01033400h,
Ports=1, MaxQ=255, IRQ=52
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating bringup
Oct  5 21:19:54 localhost kernel: ioc1: LSI53C1030 C0:
Capabilities={Initiator,Target}
Oct  5 21:19:54 localhost kernel: scsi3 : ioc1: LSI53C1030 C0, FwRev=01033400h,

Quoted 1 line

Ports=1, MaxQ=255, IRQ=52

Is 52 the right interrupt number?

Quoted 49 lines

Oct  5 21:19:54 localhost kernel: device-mapper: multipath: version 1.0.5
loaded
Oct  5 21:19:54 localhost kernel: EXT3 FS on dm-0, internal journal
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting task abort!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: mptscsih: ioc1: completing
cmds: fw_channel 0, fw_id 4, sc=f5aca500, mf = f48e3160, idx=19
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: task abort: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting target reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: target reset: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting bus reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: scsi 3:0:4:0: CDB: Inquiry: 12 00 00 00 24 00
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery

and

Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: Issue of TaskMgmt failed!
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: bus reset: FAILED
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptscsih: ioc1: attempting host reset!
(sc=f5aca500)
Oct  5 21:19:54 localhost kernel: mptbase: ioc1: Initiating recovery
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config
failed
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: FAST-5 WIDE SCSI 3.4 MB/s
ST QAS RDSTRM WRFLOW (572 ns, offset 133)
Oct  5 21:19:54 localhost kernel: scsi target3:0:4: mptspi: ioc1: mpt_config

Quoted 1 line

failed

James

Signature · 3 lines

Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

[email protected]

author

2009-02-17 23:40 UTC #3 lore raw

[Bug 12733] mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

In reply to [email protected]

http://bugzilla.kernel.org/show_bug.cgi?id=12733

------- Comment #2 from [email protected] 2009-02-17 15:40 ------- With an LSI 8704ELP and LSI SAS3081E-R present and ACPI off, the board works fine. Only the presence of an LSI 22320 causes a crash.

I don't know about the interrupt number. When I receive the cards back, I can can try to find out.

Our vendor has tested at least one other manufacturer's board with the LSI 22320 and it, too, shows the same crashing behavior when ACPI is turned off.

Signature · 3 lines

Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

James Bottomley

maintainer

2009-02-18 15:31 UTC #4 lore raw

Re: [Bug 12733] mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

Quoted 10 lines · On Tue, 2009-02-17 at 15:40 -0800, [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=12733
------- Comment #2 from [email protected] 2009-02-17 15:40 ------- With an LSI 8704ELP and LSI SAS3081E-R present and ACPI off, the board works fine. Only the presence of an LSI 22320 causes a crash.

Quoted 5 lines

I don't know about the interrupt number. When I receive the cards back, I can can try to find out.
Our vendor has tested at least one other manufacturer's board with the LSI 22320 and it, too, shows the same crashing behavior when ACPI is turned off.

But the point is that I don't think this is a MPT bug ... it's using the IRQ line the platform code assigns to it. If that IRQ line is wrong, you get the symptoms you're displaying (misrouted IRQ).

I'm not even sure this is a bug: some modern motherboards simply can't be configured without ACPI because there's no way to get the IRQ routing information otherwise.

If your motherboard isn't one of these, then it could be a failure of the non-ACPI IRQ routing platform code. None of this can be diagnosed from the snippet of the log you posted.

James

[email protected]

author

2009-02-18 15:32 UTC #5 lore raw

[Bug 12733] mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

In reply to [email protected]

http://bugzilla.kernel.org/show_bug.cgi?id=12733

------- Comment #3 from [email protected] 2009-02-18 07:32 -------
Reply-To: [email protected]

Quoted 10 lines · On Tue, 2009-02-17 at 15:40 -0800, [email protected] wrote:

http://bugzilla.kernel.org/show_bug.cgi?id=12733
------- Comment #2 from [email protected] 2009-02-17 15:40 ------- With an LSI 8704ELP and LSI SAS3081E-R present and ACPI off, the board works fine. Only the presence of an LSI 22320 causes a crash.

Quoted 5 lines

I don't know about the interrupt number. When I receive the cards back, I can can try to find out.
Our vendor has tested at least one other manufacturer's board with the LSI 22320 and it, too, shows the same crashing behavior when ACPI is turned off.

But the point is that I don't think this is a MPT bug ... it's using the IRQ line the platform code assigns to it. If that IRQ line is wrong, you get the symptoms you're displaying (misrouted IRQ).

I'm not even sure this is a bug: some modern motherboards simply can't be configured without ACPI because there's no way to get the IRQ routing information otherwise.

If your motherboard isn't one of these, then it could be a failure of the non-ACPI IRQ routing platform code. None of this can be diagnosed from the snippet of the log you posted.

James

Signature · 3 lines

Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

[email protected]

author

2009-03-19 11:47 UTC #6 lore raw

[Bug 12733] mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

In reply to [email protected]

http://bugzilla.kernel.org/show_bug.cgi?id=12733

[email protected] changed:

What |Removed |Added
----------------------------------------------------------------------------

          Component|Other                       |i386
            Product|SCSI Drivers                |Platform Specific/Hardware

Signature · 3 lines

Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

[email protected]

author

2009-03-19 11:48 UTC #7 lore raw

[Bug 12733] mpt fusion driver crashes with LSI22320SE installed and BIOS ACPI turned off

In reply to [email protected]

http://bugzilla.kernel.org/show_bug.cgi?id=12733

[email protected] changed:

What |Removed |Added
----------------------------------------------------------------------------

         AssignedTo|scsi_drivers-other@kernel-  |platform_i386@kernel-
                   |bugs.osdl.org               |bugs.osdl.org

Signature · 4 lines

Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
You are the assignee for the bug, or are watching the assignee.