ARM: add base support for Marvell PXA168
Subsystems (5)
cover ARM: add base support for Marvell PXA168
This patch set adds base support for Marvell's PXA168 application processor.
Excerpt from Marvell's PXA168 Product Brief:
"""The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost ... """
For more information, please see
PATCH 1/1 pxa: introduce plat-pxa for PXA common code and add DMA support
From: Eric Miao <[email protected]>
1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families
2. initially moved DMA code into plat-pxa
3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors should implement its own <mach/dma.h>, provide the following required definitions and '#include <plat/dma.h>' in the end:
- DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory
---
arch/arm/Kconfig | 5 ++
arch/arm/Makefile | 1 +
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/include/mach/dma.h | 83 +-------------------------------
arch/arm/plat-pxa/Kconfig | 3 +
arch/arm/plat-pxa/Makefile | 6 ++
arch/arm/{mach-pxa => plat-pxa}/dma.c | 6 +-
arch/arm/plat-pxa/include/plat/dma.h | 85 +++++++++++++++++++++++++++++++++
8 files changed, 105 insertions(+), 86 deletions(-)
create mode 100644 arch/arm/plat-pxa/Kconfig
create mode 100644 arch/arm/plat-pxa/Makefile
rename arch/arm/{mach-pxa => plat-pxa}/dma.c (97%)
create mode 100644 arch/arm/plat-pxa/include/plat/dma.harch/arm/Kconfig +5 -0
@@ -481,6 +481,7 @@ config ARCH_PXA select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT + select PLAT_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
@@ -618,6 +619,7 @@ source "arch/arm/mach-loki/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-pxa/Kconfig" +source "arch/arm/plat-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig"
@@ -687,6 +689,9 @@ config PLAT_IOP config PLAT_ORION bool +config PLAT_PXA + bool + source arch/arm/mm/Kconfig config IWMMXT
arch/arm/Makefile +1 -0
@@ -105,6 +105,7 @@ ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif machine-$(CONFIG_ARCH_PXA) := pxa + plat-$(CONFIG_PLAT_PXA) := pxa machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_INTEGRATOR) := integrator textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
arch/arm/mach-pxa/Makefile +1 -1
@@ -3,7 +3,7 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o devices.o generic.o irq.o dma.o \ +obj-y += clock.o devices.o generic.o irq.o \ time.o gpio.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o
arch/arm/mach-pxa/include/mach/dma.h +1 -82
88 lines not on this page · raw message
arch/arm/plat-pxa/Kconfig new file +3 -0
@@ -0,0 +1,3 @@ +if PLAT_PXA + +endif
arch/arm/plat-pxa/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# +# Makefile for code common across different PXA processor families +# + +obj-y := dma.o +
arch/arm/plat-pxa/dma.c renamed from arch/arm/mach-pxa/dma.c +3 -3
@@ -1,5 +1,5 @@/* -* linux/arch/arm/mach-pxa/dma.c +* linux/arch/arm/plat-pxa/dma.c * * PXA DMA registration and IRQ dispatching *
@@ -34,8 +34,8 @@ static struct dma_channel *dma_channels;static int num_dma_channels;int pxa_request_dma (char *name,pxa_dma_prio prio, -void (*irq_handler)(int ,void *), -void *data) +void (*irq_handler)(int ,void *), +void *data) {unsigned long flags;int i, found =0 ;
arch/arm/plat-pxa/include/plat/dma.h new file +85 -0
85 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: move common GPIO handling code into plat-pxa
From: Eric Miao <[email protected]>
1. add common GPIO handling code into [arch/arm/plat-pxa]
2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors should implement its own <mach/gpio.h>, provide the following required definitions and '#include <plat/gpio.h>' in the end:
- GPIO_REGS_VIRT for mapped virtual address of the GPIO registers' physical I/O memory
- macros of GPLR(), GPSR(), GPDR() for constant optimization for functions gpio_{set,get}_value() (so that bit-bang code can still have tolerable performance)
- NR_BUILTIN_GPIO for the number of onchip GPIO
- definitions of __gpio_is_inverted() and __gpio_is_occupied(), they can be either macros or inlined functions
---
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/include/mach/gpio.h | 32 +----------------
arch/arm/plat-pxa/Makefile | 1 +
arch/arm/{mach-pxa => plat-pxa}/gpio.c | 30 +---------------
arch/arm/plat-pxa/include/plat/gpio.h | 62 ++++++++++++++++++++++++++++++++
5 files changed, 66 insertions(+), 61 deletions(-)
rename arch/arm/{mach-pxa => plat-pxa}/gpio.c (89%)
create mode 100644 arch/arm/plat-pxa/include/plat/gpio.harch/arm/mach-pxa/Makefile +1 -1
@@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o \ - time.o gpio.o reset.o + time.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o ifeq ($(CONFIG_CPU_FREQ),y)
arch/arm/mach-pxa/include/mach/gpio.h +1 -31
@@ -99,40 +99,12 @@#define GAFR (x) GPIO_REG(0x54 + (((x) & 0x70) >> 2)) -/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85). -* Those cases currently cause holes in the GPIO number space, the -* actual number of the last GPIO is recorded by 'pxa_last_gpio'. -*/ -extern int pxa_last_gpio; -#define NR_BUILTIN_GPIO 128 -static inline int gpio_get_value (unsigned gpio) -{ -if (__builtin_constant_p (gpio) && (gpio <NR_BUILTIN_GPIO )) -return GPLR (gpio) &GPIO_bit (gpio); -else -return __gpio_get_value (gpio); -} - -static inline void gpio_set_value (unsigned gpio,int value) -{ -if (__builtin_constant_p (gpio) && (gpio <NR_BUILTIN_GPIO )) { -if (value) -GPSR (gpio) =GPIO_bit (gpio); -else -GPCR (gpio) =GPIO_bit (gpio); - }else { -__gpio_set_value (gpio, value); - } -} - -#define gpio_cansleep __gpio_cansleep#define gpio_to_bank (gpio) ((gpio) >> 5)#define gpio_to_irq (gpio) IRQ_GPIO(gpio)#define irq_to_gpio (irq) IRQ_TO_GPIO(irq) -#ifdef CONFIG_CPU_PXA26x/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted, * as well as their Alternate Function value being '1' for GPIO in GAFRx.
@@ -165,7 +137,5 @@ static inline int __gpio_is_occupied(unsigned gpio) return GPDR(gpio) & GPIO_bit(gpio); } -typedef int (*set_wake_t )(unsigned int irq,unsigned int on); - -extern void pxa_init_gpio (int mux_irq,int start,int end,set_wake_t fn); +#include <plat/gpio.h> #endif
arch/arm/plat-pxa/Makefile +1 -0
@@ -4,3 +4,4 @@ obj-y := dma.o +obj-$(CONFIG_GENERIC_GPIO) += gpio.o
arch/arm/plat-pxa/gpio.c renamed from arch/arm/mach-pxa/gpio.c +1 -29
@@ -1,5 +1,5 @@/* -* linux/arch/arm/mach-pxa/gpio.c +* linux/arch/arm/plat-pxa/gpio.c * * Generic PXA GPIO handling *
@@ -22,34 +22,6 @@int pxa_last_gpio; -/* -* We handle the GPIOs by banks, each bank covers up to 32 GPIOs with -* one set of registers. The register offsets are organized below: -* -* GPLR GPDR GPSR GPCR GRER GFER GEDR -* BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048 -* BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C -* BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050 -* -* BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148 -* BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C -* BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150 -* -* NOTE: -* BANK 3 is only available on PXA27x and later processors. -* BANK 4 and 5 are only available on PXA935 -*/ - -#define GPIO_BANK (n) (GPIO_REGS_VIRT + BANK_OFF(n)) - -#define GPLR_OFFSET 0x00 -#define GPDR_OFFSET 0x0C -#define GPSR_OFFSET 0x18 -#define GPCR_OFFSET 0x24 -#define GRER_OFFSET 0x30 -#define GFER_OFFSET 0x3C -#define GEDR_OFFSET 0x48 -struct pxa_gpio_chip {struct gpio_chip chip;void __iomem *regbase;
arch/arm/plat-pxa/include/plat/gpio.h new file +62 -0
62 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: move common MFP handling code into plat-pxa
From: Eric Miao <[email protected]>
--- arch/arm/mach-pxa/include/mach/mfp-pxa25x.h | 1 - arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 1 - arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h | 2 +- arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 1 - arch/arm/mach-pxa/include/mach/mfp-pxa320.h | 1 - arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h | 130 ++-------- arch/arm/mach-pxa/include/mach/mfp-pxa930.h | 1 - arch/arm/mach-pxa/mfp-pxa3xx.c | 189 +-------------- arch/arm/mach-pxa/pxa300.c | 10 +- arch/arm/mach-pxa/pxa320.c | 6 +- arch/arm/mach-pxa/pxa930.c | 6 +- arch/arm/plat-pxa/Makefile | 2 +- arch/arm/plat-pxa/include/plat/mfp.h | 369 +++++++++++++++++++++++++++ arch/arm/plat-pxa/mfp.c | 278 ++++++++++++++++++++ 14 files changed, 680 insertions(+), 317 deletions(-) create mode 100644 arch/arm/plat-pxa/include/plat/mfp.h create mode 100644 arch/arm/plat-pxa/mfp.c
arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +0 -1
@@ -1,7 +1,6 @@#ifndef __ASM_ARCH_MFP_PXA25X_H#define __ASM_ARCH_MFP_PXA25X_H -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* GPIO */
arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +0 -1
@@ -8,7 +8,6 @@* specific controller, and this should work in most cases. */ -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +1 -1
@@ -1,7 +1,7 @@#ifndef __ASM_ARCH_MFP_PXA2XX_H#define __ASM_ARCH_MFP_PXA2XX_H -#include <mach/mfp.h> +#include <plat/mfp.h> /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
arch/arm/mach-pxa/include/mach/mfp-pxa300.h +0 -1
@@ -15,7 +15,6 @@#ifndef __ASM_ARCH_MFP_PXA300_H#define __ASM_ARCH_MFP_PXA300_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */
arch/arm/mach-pxa/include/mach/mfp-pxa320.h +0 -1
@@ -15,7 +15,6 @@#ifndef __ASM_ARCH_MFP_PXA320_H#define __ASM_ARCH_MFP_PXA320_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */
arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h +18 -112
142 lines not on this page · raw message
arch/arm/mach-pxa/include/mach/mfp-pxa930.h +0 -1
@@ -13,7 +13,6 @@#ifndef __ASM_ARCH_MFP_PXA9xx_H#define __ASM_ARCH_MFP_PXA9xx_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */
arch/arm/mach-pxa/mfp-pxa3xx.c +2 -187
215 lines not on this page · raw message
arch/arm/mach-pxa/pxa300.c +5 -5
@@ -23,7 +23,7 @@#include "devices.h" #include "clock.h" -static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[]__initdata = { +static struct mfp_addr_map pxa300_mfp_addr_map[]__initdata = {MFP_ADDR_X (GPIO0 ,GPIO2 ,0x00b4 ),MFP_ADDR_X (GPIO3 ,GPIO26 ,0x027c ),
@@ -72,7 +72,7 @@ static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { };/* override pxa300 MFP register addresses */ -static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[]__initdata = { +static struct mfp_addr_map pxa310_mfp_addr_map[]__initdata = {MFP_ADDR_X (GPIO30 ,GPIO98 ,0x0418 ),MFP_ADDR_X (GPIO7_2 ,GPIO12_2 ,0x052C ),
@@ -98,13 +98,13 @@ static struct clk_lookup pxa310_clkregs[] = {static int __init pxa300_init (void ) {if (cpu_is_pxa300 () ||cpu_is_pxa310 ()) { -pxa3xx_init_mfp (); -pxa3xx_mfp_init_addr (pxa300_mfp_addr_map); +mfp_init_base (io_p2v (MFPR_BASE )); +mfp_init_addr (pxa300_mfp_addr_map);clks_register (ARRAY_AND_SIZE (common_clkregs)); }if (cpu_is_pxa310 ()) { -pxa3xx_mfp_init_addr (pxa310_mfp_addr_map); +mfp_init_addr (pxa310_mfp_addr_map);clks_register (ARRAY_AND_SIZE (pxa310_clkregs)); }
arch/arm/mach-pxa/pxa320.c +3 -3
@@ -23,7 +23,7 @@#include "devices.h" #include "clock.h" -static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[]__initdata = { +static struct mfp_addr_map pxa320_mfp_addr_map[]__initdata = {MFP_ADDR_X (GPIO0 ,GPIO4 ,0x0124 ),MFP_ADDR_X (GPIO5 ,GPIO9 ,0x028C ),
@@ -86,8 +86,8 @@ static struct clk_lookup pxa320_clkregs[] = {static int __init pxa320_init (void ) {if (cpu_is_pxa320 ()) { -pxa3xx_init_mfp (); -pxa3xx_mfp_init_addr (pxa320_mfp_addr_map); +mfp_init_base (io_p2v (MFPR_BASE )); +mfp_init_addr (pxa320_mfp_addr_map);clks_register (ARRAY_AND_SIZE (pxa320_clkregs)); }
arch/arm/mach-pxa/pxa930.c +3 -3
@@ -18,7 +18,7 @@#include <mach/pxa930.h> -static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[]__initdata = { +static struct mfp_addr_map pxa930_mfp_addr_map[]__initdata = {MFP_ADDR (GPIO0 ,0x02e0 ),MFP_ADDR (GPIO1 ,0x02dc ),
@@ -179,8 +179,8 @@ static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {static int __init pxa930_init (void ) {if (cpu_is_pxa930 ()) { -pxa3xx_init_mfp (); -pxa3xx_mfp_init_addr (pxa930_mfp_addr_map); +mfp_init_base (io_p2v (MFPR_BASE )); +mfp_init_addr (pxa930_mfp_addr_map); }return 0 ;
arch/arm/plat-pxa/Makefile +1 -1
@@ -2,6 +2,6 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o +obj-y := dma.o mfp.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o
arch/arm/plat-pxa/include/plat/mfp.h new file +369 -0
369 lines not on this page · raw message
arch/arm/plat-pxa/mfp.c new file +278 -0
278 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: add base support for Marvell's PXA168 processor line
From: Eric Miao <[email protected]>
"""The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """
See http://www.marvell.com/featured/pxa168.jsp for more information.
1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on
2. Clock reuses Russell's common clkdev, and added the basic support
for UART1/2.
3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that:
a. this array of device description is marked with __initdata and
can be freed up system is fully up
b. which means board code has to add all needed devices early in
his initializing function
c. platform specific data can now be marked as __initdata since
they are allocated and copied by platform_device_add_data()
4. only the basic UART1/2/3 are added, more devices will come later.
--- arch/arm/Kconfig | 16 + arch/arm/Makefile | 1 + arch/arm/boot/compressed/head.S | 12 + arch/arm/include/asm/cacheflush.h | 8 + arch/arm/include/asm/proc-fns.h | 8 + arch/arm/mach-mmp/Kconfig | 20 ++ arch/arm/mach-mmp/Makefile | 11 + arch/arm/mach-mmp/Makefile.boot | 1 + arch/arm/mach-mmp/clock.c | 83 +++++ arch/arm/mach-mmp/clock.h | 71 +++++ arch/arm/mach-mmp/common.c | 37 +++ arch/arm/mach-mmp/common.h | 9 + arch/arm/mach-mmp/devices.c | 72 +++++ arch/arm/mach-mmp/include/mach/addr-map.h | 34 ++ arch/arm/mach-mmp/include/mach/clkdev.h | 7 + arch/arm/mach-mmp/include/mach/cputype.h | 35 +++ arch/arm/mach-mmp/include/mach/debug-macro.S | 23 ++ arch/arm/mach-mmp/include/mach/devices.h | 31 ++ arch/arm/mach-mmp/include/mach/dma.h | 13 + arch/arm/mach-mmp/include/mach/entry-macro.S | 25 ++ arch/arm/mach-mmp/include/mach/hardware.h | 4 + arch/arm/mach-mmp/include/mach/io.h | 21 ++ arch/arm/mach-mmp/include/mach/irqs.h | 59 ++++ arch/arm/mach-mmp/include/mach/memory.h | 14 + arch/arm/mach-mmp/include/mach/pxa168.h | 20 ++ arch/arm/mach-mmp/include/mach/regs-apbc.h | 53 ++++ arch/arm/mach-mmp/include/mach/regs-apmu.h | 36 +++ arch/arm/mach-mmp/include/mach/regs-icu.h | 31 ++ arch/arm/mach-mmp/include/mach/regs-timers.h | 44 +++ arch/arm/mach-mmp/include/mach/system.h | 21 ++ arch/arm/mach-mmp/include/mach/timex.h | 9 + arch/arm/mach-mmp/include/mach/uncompress.h | 41 +++ arch/arm/mach-mmp/include/mach/vmalloc.h | 5 + arch/arm/mach-mmp/irq.c | 58 ++++ arch/arm/mach-mmp/pxa168.c | 54 ++++ arch/arm/mach-mmp/time.c | 212 +++++++++++++ arch/arm/mach-mmp/zylonite2.c | 31 ++ arch/arm/mm/Kconfig | 15 +- arch/arm/mm/Makefile | 1 + arch/arm/mm/proc-mohawk.S | 421 ++++++++++++++++++++++++++ 40 files changed, 1665 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-mmp/Kconfig create mode 100644 arch/arm/mach-mmp/Makefile create mode 100644 arch/arm/mach-mmp/Makefile.boot create mode 100644 arch/arm/mach-mmp/clock.c create mode 100644 arch/arm/mach-mmp/clock.h create mode 100644 arch/arm/mach-mmp/common.c create mode 100644 arch/arm/mach-mmp/common.h create mode 100644 arch/arm/mach-mmp/devices.c create mode 100644 arch/arm/mach-mmp/include/mach/addr-map.h create mode 100644 arch/arm/mach-mmp/include/mach/clkdev.h create mode 100644 arch/arm/mach-mmp/include/mach/cputype.h create mode 100644 arch/arm/mach-mmp/include/mach/debug-macro.S create mode 100644 arch/arm/mach-mmp/include/mach/devices.h create mode 100644 arch/arm/mach-mmp/include/mach/dma.h create mode 100644 arch/arm/mach-mmp/include/mach/entry-macro.S create mode 100644 arch/arm/mach-mmp/include/mach/hardware.h create mode 100644 arch/arm/mach-mmp/include/mach/io.h create mode 100644 arch/arm/mach-mmp/include/mach/irqs.h create mode 100644 arch/arm/mach-mmp/include/mach/memory.h create mode 100644 arch/arm/mach-mmp/include/mach/pxa168.h create mode 100644 arch/arm/mach-mmp/include/mach/regs-apbc.h create mode 100644 arch/arm/mach-mmp/include/mach/regs-apmu.h create mode 100644 arch/arm/mach-mmp/include/mach/regs-icu.h create mode 100644 arch/arm/mach-mmp/include/mach/regs-timers.h create mode 100644 arch/arm/mach-mmp/include/mach/system.h create mode 100644 arch/arm/mach-mmp/include/mach/timex.h create mode 100644 arch/arm/mach-mmp/include/mach/uncompress.h create mode 100644 arch/arm/mach-mmp/include/mach/vmalloc.h create mode 100644 arch/arm/mach-mmp/irq.c create mode 100644 arch/arm/mach-mmp/pxa168.c create mode 100644 arch/arm/mach-mmp/time.c create mode 100644 arch/arm/mach-mmp/zylonite2.c create mode 100644 arch/arm/mm/proc-mohawk.S
arch/arm/Kconfig +16 -0
@@ -478,6 +478,8 @@ config ARCH_PXA select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK + select COMMON_CLKDEV select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT
@@ -485,6 +487,18 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. +config ARCH_MMP + bool "Marvell PXA168" + depends on MMU + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select TICK_ONESHOT + select PLAT_PXA + help + Support for Marvell's PXA168 processor line. + config ARCH_RPC bool "RiscPC" select ARCH_ACORN
@@ -621,6 +635,8 @@ source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-pxa/Kconfig" source "arch/arm/plat-pxa/Kconfig" +source "arch/arm/mach-mmp/Kconfig" + source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-omap/Kconfig"
arch/arm/Makefile +1 -0
@@ -105,6 +105,7 @@ ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif machine-$(CONFIG_ARCH_PXA) := pxa + machine-$(CONFIG_ARCH_MMP) := mmp plat-$(CONFIG_PLAT_PXA) := pxa machine-$(CONFIG_ARCH_L7200) := l7200 machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
arch/arm/boot/compressed/head.S +12 -0
@@ -630,6 +630,18 @@ proc_types: b __armv4_mmu_cache_off b __armv4_mmu_cache_flush + .word 0x56158000 + .word 0xff0ff000 + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv5tej_mmu_cache_flush + + .word 0x56056930 + .word 0xff0ffff0 @ PXA935 + b __armv4_mmu_cache_on + b __armv4_mmu_cache_off + b __armv4_mmu_cache_flush + .word 0x56050000 @ Feroceon .word 0xff0f0000 b __armv4_mmu_cache_on
arch/arm/include/asm/cacheflush.h +8 -0
@@ -94,6 +94,14 @@# endif #endif +#if defined(CONFIG_CPU_MOHAWK ) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE mohawk +# endif +#endif +#if defined(CONFIG_CPU_FEROCEON )# define MULTI_CACHE 1#endif
arch/arm/include/asm/proc-fns.h +8 -0
@@ -185,6 +185,14 @@# define CPU_NAME cpu_xsc3# endif # endif +# ifdef CONFIG_CPU_MOHAWK +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_mohawk +# endif +# endif # ifdef CONFIG_CPU_FEROCEON # ifdef CPU_NAME # undef MULTI_CPU
arch/arm/mach-mmp/Kconfig new file +20 -0
@@ -0,0 +1,20 @@ +if ARCH_MMP + +menu "Marvell PXA168 Implmentations" + +config MACH_ZYLONITE2 + bool "Marvell's PXA168 Zylonite2 Development Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + Zylonite2 Development Board. + +endmenu + +config CPU_PXA168 + bool + select CPU_MOHAWK + help + Select code specific to PXA168 + +endif
arch/arm/mach-mmp/Makefile new file +11 -0
@@ -0,0 +1,11 @@ +# +# Makefile for Marvell's PXA168 processors line +# + +obj-y += common.o clock.o devices.o irq.o time.o + +# SoC support +obj-$(CONFIG_CPU_PXA168) += pxa168.o + +# board support +obj-$(CONFIG_MACH_ZYLONITE2) += zylonite2.o
arch/arm/mach-mmp/Makefile.boot new file +1 -0
@@ -0,0 +1 @@ + zreladdr-y := 0x00008000
arch/arm/mach-mmp/clock.c new file +83 -0
83 lines not on this page · raw message
arch/arm/mach-mmp/clock.h new file +71 -0
71 lines not on this page · raw message
arch/arm/mach-mmp/common.c new file +37 -0
@@ -0,0 +1,37 @@ +/* +* linux/arch/arm/mach-mmp/common.c +* +* Code common to PXA168 processor lines +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/page.h> +#include <asm/mach/map.h> +#include <mach/addr-map.h> + +#include "common.h" + +static struct map_desc standard_io_desc[]__initdata = { + { + .pfn =__phys_to_pfn (APB_PHYS_BASE ), + .virtual =APB_VIRT_BASE , + .length =APB_PHYS_SIZE , + .type =MT_DEVICE , + }, { + .pfn =__phys_to_pfn (AXI_PHYS_BASE ), + .virtual =AXI_VIRT_BASE , + .length =AXI_PHYS_SIZE , + .type =MT_DEVICE , + }, +}; + +void __init pxa_map_io (void ) +{ +iotable_init (standard_io_desc,ARRAY_SIZE (standard_io_desc)); +}
arch/arm/mach-mmp/common.h new file +9 -0
@@ -0,0 +1,9 @@ +#define ARRAY_AND_SIZE (x) (x), ARRAY_SIZE(x) + +struct sys_timer ; + +extern struct sys_timer pxa168_timer; +extern void __init pxa168_init_irq (void ); + +extern void __init icu_init_irq (void ); +extern void __init pxa_map_io (void );
arch/arm/mach-mmp/devices.c new file +72 -0
72 lines not on this page · raw message
arch/arm/mach-mmp/include/mach/addr-map.h new file +34 -0
@@ -0,0 +1,34 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/addr-map.h +* +* Common address map definitions +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_MACH_ADDR_MAP_H +#define __ASM_MACH_ADDR_MAP_H + +/* APB - Application Subsystem Peripheral Bus +* +* NOTE: the DMA controller registers are actually on the AXI fabric #1 +* slave port to AHB/APB bridge, due to its close relationship to those +* peripherals on APB, let's count it into the ABP mapping area. +*/ +#define APB_PHYS_BASE 0xd4000000 +#define APB_VIRT_BASE 0xfe000000 +#define APB_PHYS_SIZE 0x00200000 + +#define AXI_PHYS_BASE 0xd4200000 +#define AXI_VIRT_BASE 0xfe200000 +#define AXI_PHYS_SIZE 0x00200000 + +/* Static Memory Controller - Chip Select 0 and 1 */ +#define SMC_CS0_PHYS_BASE 0x80000000 +#define SMC_CS0_PHYS_SIZE 0x10000000 +#define SMC_CS1_PHYS_BASE 0x90000000 +#define SMC_CS1_PHYS_SIZE 0x10000000 + +#endif /* __ASM_MACH_ADDR_MAP_H */
arch/arm/mach-mmp/include/mach/clkdev.h new file +7 -0
@@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get (clk) ({ 1; }) +#define __clk_put (clk) do { } while (0) + +#endif /* __ASM_MACH_CLKDEV_H */
arch/arm/mach-mmp/include/mach/cputype.h new file +35 -0
@@ -0,0 +1,35 @@ +#ifndef __ASM_MACH_CPUTYPE_H +#define __ASM_MACH_CPUTYPE_H + +#include <asm/cputype.h> + +/* +* CPU Stepping OLD_ID CPU_ID CHIP_ID +* +* PXA168 A0 0x41159263 0x56158400 0x00A0A333 +*/ + +#ifndef CONFIG_CPU_MOHAWK_OLD_ID + +#ifdef CONFIG_CPU_PXA168 +# define __cpu_is_pxa168 (id) \ + ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x84; }) +#else +# define __cpu_is_pxa168 (id) (0) +#endif + +#else + +#ifdef CONFIG_CPU_PXA168 +# define __cpu_is_pxa168 (id) \ + ({ unsigned int _id = (id) & 0xffff; _id == 0x9263; }) +#else +# define __cpu_is_pxa168 (id) (0) +#endif + +#endif /* CONFIG_CPU_MOHAWK_OLD_ID */ + +#define cpu_is_pxa168 () ({ __cpu_is_pxa168(read_cpuid_id()); }) +#define cpu_is_pxa910 () ({ __cpu_is_pxa910(read_cpuid_id()); }) + +#endif /* __ASM_MACH_CPUTYPE_H */
arch/arm/mach-mmp/include/mach/debug-macro.S new file +23 -0
@@ -0,0 +1,23 @@ +/* arch/arm/mach-mmp/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copied from arch/arm/mach-pxa/include/mach/debug.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/addr-map.h> + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =APB_PHYS_BASE @ physical + ldrne \rx, =APB_VIRT_BASE @ virtual + orr \rx, \rx, #0x00017000 + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S>
arch/arm/mach-mmp/include/mach/devices.h new file +31 -0
@@ -0,0 +1,31 @@ +#include <linux/types.h> + +#define MAX_RESOURCE_DMA 2 + +/* structure for describing the on-chip devices */ +struct pxa_device_desc { +const char *dev_name; +const char *drv_name; +int id; +int irq; +unsigned long start; +unsigned long size; +int dma[MAX_RESOURCE_DMA ]; +}; + +#define PXA168_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...) \ +struct pxa_device_desc pxa168_device_##_name __initdata = { \ + .dev_name = "pxa168-" #_name, \ + .drv_name = _drv, \ + .id = _id, \ + .irq = IRQ_PXA168_##_irq, \ + .start = _start, \ + .size = _size, \ + .dma = { _dma }, \ +}; + +extern struct pxa_device_desc pxa168_device_uart1; +extern struct pxa_device_desc pxa168_device_uart2; +extern struct pxa_device_desc pxa168_device_uart3; + +extern int pxa_register_device (struct pxa_device_desc *,void *,size_t );
arch/arm/mach-mmp/include/mach/dma.h new file +13 -0
@@ -0,0 +1,13 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/dma.h +*/ + +#ifndef __ASM_MACH_DMA_H +#define __ASM_MACH_DMA_H + +#include <mach/addr-map.h> + +#define DMAC_REGS_VIRT (APB_VIRT_BASE + 0x00000) + +#include <plat/dma.h> +#endif /* __ASM_MACH_DMA_H */
arch/arm/mach-mmp/include/mach/entry-macro.S new file +25 -0
@@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/entry-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <mach/regs-icu.h> + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =ICU_AP_IRQ_SEL_INT_NUM + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \tmp, [\base, #0] + and \irqnr, \tmp, #0x3f + tst \tmp, #(1 << 6) + .endm
arch/arm/mach-mmp/include/mach/hardware.h new file +4 -0
@@ -0,0 +1,4 @@ +#ifndef __ASM_MACH_HARDWARE_H +#define __ASM_MACH_HARDWARE_H + +#endif /* __ASM_MACH_HARDWARE_H */
arch/arm/mach-mmp/include/mach/io.h new file +21 -0
@@ -0,0 +1,21 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/io.h +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_MACH_IO_H +#define __ASM_MACH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* +* We don't actually have real ISA nor PCI buses, but there is so many +* drivers out there that might just work if we fake them... +*/ +#define __io (a) __typesafe_io(a) +#define __mem_pci (a) (a) + +#endif /* __ASM_MACH_IO_H */
arch/arm/mach-mmp/include/mach/irqs.h new file +59 -0
59 lines not on this page · raw message
arch/arm/mach-mmp/include/mach/memory.h new file +14 -0
@@ -0,0 +1,14 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/memory.h +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_MACH_MEMORY_H +#define __ASM_MACH_MEMORY_H + +#define PHYS_OFFSET UL(0x00000000) + +#endif /* __ASM_MACH_MEMORY_H */
arch/arm/mach-mmp/include/mach/pxa168.h new file +20 -0
@@ -0,0 +1,20 @@ +#ifndef __ASM_MACH_PXA168_H +#define __ASM_MACH_PXA168_H + +#include <mach/devices.h> + +static inline int pxa168_add_uart1 (void ) +{ +return pxa_register_device (&pxa168_device_uart1,NULL ,0 ); +} + +static inline int pxa168_add_uart2 (void ) +{ +return pxa_register_device (&pxa168_device_uart2,NULL ,0 ); +} + +static inline int pxa168_add_uart3 (void ) +{ +return pxa_register_device (&pxa168_device_uart3,NULL ,0 ); +} +#endif /* __ASM_MACH_PXA168_H */
arch/arm/mach-mmp/include/mach/regs-apbc.h new file +53 -0
53 lines not on this page · raw message
arch/arm/mach-mmp/include/mach/regs-apmu.h new file +36 -0
@@ -0,0 +1,36 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/regs-apmu.h +* +* Application Subsystem Power Management Unit +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_MACH_REGS_APMU_H +#define __ASM_MACH_REGS_APMU_H + +#include <mach/addr-map.h> + +#define APMU_VIRT_BASE (AXI_VIRT_BASE + 0x82800) +#define APMU_REG (x) (APMU_VIRT_BASE + (x)) + +/* Clock Reset Control */ +#define APMU_IRE APMU_REG(0x048) +#define APMU_LCD APMU_REG(0x04c) +#define APMU_CCIC APMU_REG(0x050) +#define APMU_SDH0 APMU_REG(0x054) +#define APMU_SDH1 APMU_REG(0x058) +#define APMU_USB APMU_REG(0x05c) +#define APMU_NAND APMU_REG(0x060) +#define APMU_DMA APMU_REG(0x064) +#define APMU_GEU APMU_REG(0x068) +#define APMU_BUS APMU_REG(0x06c) + +#define APMU_FNCLK_EN (1 << 4) +#define APMU_AXICLK_EN (1 << 3) +#define APMU_FNRST_DIS (1 << 1) +#define APMU_AXIRST_DIS (1 << 0) + +#endif /* __ASM_MACH_REGS_APMU_H */
arch/arm/mach-mmp/include/mach/regs-icu.h new file +31 -0
@@ -0,0 +1,31 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/regs-icu.h +* +* Interrupt Control Unit +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_MACH_ICU_H +#define __ASM_MACH_ICU_H + +#include <mach/addr-map.h> + +#define ICU_VIRT_BASE (AXI_VIRT_BASE + 0x82000) +#define ICU_REG (x) (ICU_VIRT_BASE + (x)) + +#define ICU_INT_CONF (n) ICU_REG((n) << 2) +#define ICU_INT_CONF_AP_INT (1 << 6) +#define ICU_INT_CONF_CP_INT (1 << 5) +#define ICU_INT_CONF_IRQ (1 << 4) +#define ICU_INT_CONF_MASK (0xf) + +#define ICU_AP_FIQ_SEL_INT_NUM ICU_REG(0x108)/* AP FIQ Selected Interrupt */ +#define ICU_AP_IRQ_SEL_INT_NUM ICU_REG(0x10C)/* AP IRQ Selected Interrupt */ +#define ICU_AP_GBL_IRQ_MSK ICU_REG(0x114)/* AP Global Interrupt Mask */ +#define ICU_INT_STATUS_0 ICU_REG(0x128)/* Interrupt Stuats 0 */ +#define ICU_INT_STATUS_1 ICU_REG(0x12C)/* Interrupt Status 1 */ + +#endif /* __ASM_MACH_ICU_H */
arch/arm/mach-mmp/include/mach/regs-timers.h new file +44 -0
44 lines not on this page · raw message
arch/arm/mach-mmp/include/mach/system.h new file +21 -0
@@ -0,0 +1,21 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/system.h +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#ifndef __ASM_MACH_SYSTEM_H +#define __ASM_MACH_SYSTEM_H + +static inline void arch_idle (void ) +{ +cpu_do_idle (); +} + +static inline void arch_reset (char mode) +{ +cpu_reset (0 ); +} +#endif /* __ASM_MACH_SYSTEM_H */
arch/arm/mach-mmp/include/mach/timex.h new file +9 -0
@@ -0,0 +1,9 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/timex.h +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +*/ + +#define CLOCK_TICK_RATE 3250000
arch/arm/mach-mmp/include/mach/uncompress.h new file +41 -0
41 lines not on this page · raw message
arch/arm/mach-mmp/include/mach/vmalloc.h new file +5 -0
@@ -0,0 +1,5 @@ +/* +* linux/arch/arm/mach-mmp/include/mach/vmalloc.h +*/ + +#define VMALLOC_END 0xfe000000
arch/arm/mach-mmp/irq.c new file +58 -0
58 lines not on this page · raw message
arch/arm/mach-mmp/pxa168.c new file +54 -0
54 lines not on this page · raw message
arch/arm/mach-mmp/time.c new file +212 -0
212 lines not on this page · raw message
arch/arm/mach-mmp/zylonite2.c new file +31 -0
@@ -0,0 +1,31 @@ +/* +* linux/arch/arm/mach-mmp/zylonite2.c +* +* Support for the Marvell PXA168-based Zylonite2 Development Platform. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* publishhed by the Free Software Foundation. +*/ + +#include <linux/init.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/addr-map.h> + +#include "common.h" + +static void __init zylonite2_init (void ) +{ +} + +MACHINE_START (ZYLONITE2 ,"PXA168-based Zylonite2 Development Platform" ) + .phys_io = APB_PHYS_BASE, + .boot_params = 0x00000100, + .io_pg_offst = (APB_VIRT_BASE >> 18) & 0xfffc, + .map_io = pxa_map_io, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = zylonite2_init, +MACHINE_END
arch/arm/mm/Kconfig +13 -2
@@ -340,6 +340,17 @@ config CPU_XSC3 select CPU_TLB_V4WBI if MMU select IO_36 +# Marvell PJ1 (Mohawk) +config CPU_MOHAWK + bool + select CPU_32v5 + select CPU_ABRT_EV5T + select CPU_PABRT_NOIFAR + select CPU_CACHE_VIVT + select CPU_CP15_MMU + select CPU_TLB_V4WBI if MMU + select CPU_COPY_V4WB if MMU + # Feroceon config CPU_FEROCEON bool
@@ -569,7 +580,7 @@ comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 || CPU_V7 || CPU_FEROCEON + depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON default y help Say Y if you want to include kernel support for running user space
@@ -653,7 +664,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 || CPU_V6 || CPU_XSC3 || CPU_V7 + depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 help Say Y here to disable branch prediction. If unsure, say N.
arch/arm/mm/Makefile +1 -0
@@ -70,6 +70,7 @@ obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o +obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o obj-$(CONFIG_CPU_V6) += proc-v6.o obj-$(CONFIG_CPU_V7) += proc-v7.o
arch/arm/mm/proc-mohawk.S new file +421 -0
421 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: add GPIO support for pxa168
From: Eric Miao <[email protected]>
--- arch/arm/Kconfig | 2 + arch/arm/mach-mmp/include/mach/gpio.h | 36 +++++++++++++++++++++++++++++++++ arch/arm/mach-mmp/pxa168.c | 19 +++++++++++++++++ 3 files changed, 57 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mmp/include/mach/gpio.h
arch/arm/Kconfig +2 -0
@@ -490,6 +490,8 @@ config ARCH_PXA config ARCH_MMP bool "Marvell PXA168" depends on MMU + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select COMMON_CLKDEV select GENERIC_TIME
arch/arm/mach-mmp/include/mach/gpio.h new file +36 -0
@@ -0,0 +1,36 @@ +#ifndef __ASM_MACH_GPIO_H +#define __ASM_MACH_GPIO_H + +#include <mach/addr-map.h> +#include <mach/irqs.h> +#include <asm-generic/gpio.h> + +#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) + +#define BANK_OFF (n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) +#define GPIO_REG (x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x)))) + +#define NR_BUILTIN_GPIO (128) + +#define gpio_to_bank (gpio) ((gpio) >> 5) +#define gpio_to_irq (gpio) (IRQ_GPIO_START + (gpio)) +#define irq_to_gpio (irq) ((irq) - IRQ_GPIO_START) + + +#define __gpio_is_inverted (gpio) (0) +#define __gpio_is_occupied (gpio) (0) + +/* NOTE: these macros are defined here to make optimization of +* gpio_{get,set}_value() to work when 'gpio' is a constant. +* Usage of these macros otherwise is no longer recommended, +* use generic GPIO API whenever possible. +*/ +#define GPIO_bit (gpio) (1 << ((gpio) & 0x1f)) + +#define GPLR (x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00) +#define GPDR (x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c) +#define GPSR (x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18) +#define GPCR (x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24) + +#include <plat/gpio.h> +#endif /* __ASM_MACH_GPIO_H */
arch/arm/mach-mmp/pxa168.c +19 -0
@@ -12,19 +12,38 @@#include <linux/kernel.h> #include <linux/init.h> #include <linux/list.h> +#include <linux/io.h> +#include <linux/clk.h> #include <mach/addr-map.h> #include <mach/cputype.h> #include <mach/regs-apbc.h> #include <mach/irqs.h> +#include <mach/gpio.h> #include <mach/dma.h> #include "common.h" #include "clock.h" +#define APMASK (i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c) + +static void __init pxa168_init_gpio (void ) +{ +int i; + +clk_enable (&clk_pxa168_gpio); + +/* unmask GPIO edge detection for all 4 banks - APMASKx */ +for (i =0 ; i <4 ; i++) +__raw_writel (0xffffffff ,APMASK (i)); + +pxa_init_gpio (IRQ_PXA168_GPIOX ,0 ,127 ,NULL ); +} +void __init pxa168_init_irq (void ) {icu_init_irq (); +pxa168_init_gpio (); }/* clocks for external use */
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: add MFP support for pxa168
From: Eric Miao <[email protected]>
--- arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 258 +++++++++++++++++++++++++++ arch/arm/mach-mmp/include/mach/mfp.h | 37 ++++ arch/arm/mach-mmp/pxa168.c | 15 ++ 3 files changed, 310 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mmp/include/mach/mfp-pxa168.h create mode 100644 arch/arm/mach-mmp/include/mach/mfp.h
arch/arm/mach-mmp/include/mach/mfp-pxa168.h new file +258 -0
@@ -0,0 +1,258 @@ +#ifndef __ASM_MACH_MFP_PXA168_H +#define __ASM_MACH_MFP_PXA168_H + +#include <mach/mfp.h> + +/* GPIO */ +#define GPIO0_GPIO MFP_CFG(GPIO0, AF5) +#define GPIO1_GPIO MFP_CFG(GPIO1, AF5) +#define GPIO2_GPIO MFP_CFG(GPIO2, AF5) +#define GPIO3_GPIO MFP_CFG(GPIO3, AF5) +#define GPIO4_GPIO MFP_CFG(GPIO4, AF5) +#define GPIO5_GPIO MFP_CFG(GPIO5, AF5) +#define GPIO6_GPIO MFP_CFG(GPIO6, AF5) +#define GPIO7_GPIO MFP_CFG(GPIO7, AF5) +#define GPIO8_GPIO MFP_CFG(GPIO8, AF5) +#define GPIO9_GPIO MFP_CFG(GPIO9, AF5) +#define GPIO10_GPIO MFP_CFG(GPIO10, AF5) +#define GPIO11_GPIO MFP_CFG(GPIO11, AF5) +#define GPIO12_GPIO MFP_CFG(GPIO12, AF5) +#define GPIO13_GPIO MFP_CFG(GPIO13, AF5) +#define GPIO14_GPIO MFP_CFG(GPIO14, AF5) +#define GPIO15_GPIO MFP_CFG(GPIO15, AF5) +#define GPIO16_GPIO MFP_CFG(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG(GPIO17, AF5) +#define GPIO18_GPIO MFP_CFG(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG(GPIO19, AF5) +#define GPIO20_GPIO MFP_CFG(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG(GPIO21, AF5) +#define GPIO22_GPIO MFP_CFG(GPIO22, AF5) +#define GPIO23_GPIO MFP_CFG(GPIO23, AF5) +#define GPIO24_GPIO MFP_CFG(GPIO24, AF5) +#define GPIO25_GPIO MFP_CFG(GPIO25, AF5) +#define GPIO26_GPIO MFP_CFG(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG(GPIO27, AF5) +#define GPIO28_GPIO MFP_CFG(GPIO28, AF5) +#define GPIO29_GPIO MFP_CFG(GPIO29, AF5) +#define GPIO30_GPIO MFP_CFG(GPIO30, AF5) +#define GPIO31_GPIO MFP_CFG(GPIO31, AF5) +#define GPIO32_GPIO MFP_CFG(GPIO32, AF5) +#define GPIO33_GPIO MFP_CFG(GPIO33, AF5) +#define GPIO34_GPIO MFP_CFG(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG(GPIO45, AF0) +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) +#define GPIO47_GPIO MFP_CFG(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG(GPIO48, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) +#define GPIO53_GPIO MFP_CFG(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG(GPIO55, AF0) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO57_GPIO MFP_CFG(GPIO57, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) +#define GPIO63_GPIO MFP_CFG(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG(GPIO84, AF0) +#define GPIO85_GPIO MFP_CFG(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG(GPIO120, AF0) +#define GPIO121_GPIO MFP_CFG(GPIO121, AF0) +#define GPIO122_GPIO MFP_CFG(GPIO122, AF0) + +/* DFI */ +#define GPIO0_DFI_D15 MFP_CFG(GPIO0, AF0) +#define GPIO1_DFI_D14 MFP_CFG(GPIO1, AF0) +#define GPIO2_DFI_D13 MFP_CFG(GPIO2, AF0) +#define GPIO3_DFI_D12 MFP_CFG(GPIO3, AF0) +#define GPIO4_DFI_D11 MFP_CFG(GPIO4, AF0) +#define GPIO5_DFI_D10 MFP_CFG(GPIO5, AF0) +#define GPIO6_DFI_D9 MFP_CFG(GPIO6, AF0) +#define GPIO7_DFI_D8 MFP_CFG(GPIO7, AF0) +#define GPIO8_DFI_D7 MFP_CFG(GPIO8, AF0) +#define GPIO9_DFI_D6 MFP_CFG(GPIO9, AF0) +#define GPIO10_DFI_D5 MFP_CFG(GPIO10, AF0) +#define GPIO11_DFI_D4 MFP_CFG(GPIO11, AF0) +#define GPIO12_DFI_D3 MFP_CFG(GPIO12, AF0) +#define GPIO13_DFI_D2 MFP_CFG(GPIO13, AF0) +#define GPIO14_DFI_D1 MFP_CFG(GPIO14, AF0) +#define GPIO15_DFI_D0 MFP_CFG(GPIO15, AF0) + +#define GPIO30_DFI_ADDR0 MFP_CFG(GPIO30, AF0) +#define GPIO31_DFI_ADDR1 MFP_CFG(GPIO31, AF0) +#define GPIO32_DFI_ADDR2 MFP_CFG(GPIO32, AF0) +#define GPIO33_DFI_ADDR3 MFP_CFG(GPIO33, AF0) + +/* NAND */ +#define GPIO16_ND_nCS0 MFP_CFG(GPIO16, AF1) +#define GPIO17_ND_nWE MFP_CFG(GPIO17, AF0) +#define GPIO21_ND_ALE MFP_CFG(GPIO21, AF0) +#define GPIO22_ND_CLE MFP_CFG(GPIO22, AF0) +#define GPIO24_ND_nRE MFP_CFG(GPIO24, AF0) +#define GPIO26_ND_RnB1 MFP_CFG(GPIO26, AF1) +#define GPIO27_ND_RnB2 MFP_CFG(GPIO27, AF1) + +/* Static Memory Controller */ +#define GPIO18_SMC_nCS0 MFP_CFG(GPIO18, AF3) +#define GPIO18_SMC_nCS1 MFP_CFG(GPIO18, AF2) +#define GPIO16_SMC_nCS0 MFP_CFG(GPIO16, AF2) +#define GPIO16_SMC_nCS1 MFP_CFG(GPIO16, AF3) +#define GPIO19_SMC_nCS0 MFP_CFG(GPIO19, AF0) +#define GPIO20_SMC_nCS1 MFP_CFG(GPIO20, AF2) +#define GPIO23_SMC_nLUA MFP_CFG(GPIO23, AF0) +#define GPIO25_SMC_nLLA MFP_CFG(GPIO25, AF0) +#define GPIO27_SMC_IRQ MFP_CFG(GPIO27, AF0) +#define GPIO28_SMC_RDY MFP_CFG(GPIO28, AF0) +#define GPIO29_SMC_SCLK MFP_CFG(GPIO29, AF0) +#define GPIO34_SMC_nCS1 MFP_CFG(GPIO34, AF2) +#define GPIO35_SMC_BE1 MFP_CFG(GPIO35, AF2) +#define GPIO36_SMC_BE2 MFP_CFG(GPIO36, AF2) + +/* Compact Flash */ +#define GPIO19_CF_nCE1 MFP_CFG(GPIO19, AF3) +#define GPIO20_CF_nCE2 MFP_CFG(GPIO20, AF3) +#define GPIO23_CF_nALE MFP_CFG(GPIO23, AF3) +#define GPIO25_CF_nRESET MFP_CFG(GPIO25, AF3) +#define GPIO28_CF_RDY MFP_CFG(GPIO28, AF3) +#define GPIO29_CF_STSCH MFP_CFG(GPIO29, AF3) +#define GPIO30_CF_nREG MFP_CFG(GPIO30, AF3) +#define GPIO31_CF_nIOIS16 MFP_CFG(GPIO31, AF3) +#define GPIO32_CF_nCD1 MFP_CFG(GPIO32, AF3) +#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) + +/* UART1 */ +#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) +#define GPIO107_UART1_RXD MFP_CFG_DRV(GPIO107, AF2, FAST) +#define GPIO108_UART1_RXD MFP_CFG_DRV(GPIO108, AF1, FAST) +#define GPIO108_UART1_TXD MFP_CFG_DRV(GPIO108, AF2, FAST) +#define GPIO109_UART1_CTS MFP_CFG(GPIO109, AF1) +#define GPIO109_UART1_RTS MFP_CFG(GPIO109, AF2) +#define GPIO110_UART1_RTS MFP_CFG(GPIO110, AF1) +#define GPIO110_UART1_CTS MFP_CFG(GPIO110, AF2) +#define GPIO111_UART1_RI MFP_CFG(GPIO111, AF1) +#define GPIO111_UART1_DSR MFP_CFG(GPIO111, AF2) +#define GPIO112_UART1_DTR MFP_CFG(GPIO111, AF1) +#define GPIO112_UART1_DCD MFP_CFG(GPIO112, AF2) + +/* MMC1 */ +#define GPIO37_MMC1_DAT7 MFP_CFG(GPIO37, AF1) +#define GPIO38_MMC1_DAT6 MFP_CFG(GPIO38, AF1) +#define GPIO54_MMC1_DAT5 MFP_CFG(GPIO54, AF1) +#define GPIO48_MMC1_DAT4 MFP_CFG(GPIO48, AF1) +#define GPIO51_MMC1_DAT3 MFP_CFG(GPIO51, AF1) +#define GPIO52_MMC1_DAT2 MFP_CFG(GPIO52, AF1) +#define GPIO40_MMC1_DAT1 MFP_CFG(GPIO40, AF1) +#define GPIO41_MMC1_DAT0 MFP_CFG(GPIO41, AF1) +#define GPIO49_MMC1_CMD MFP_CFG(GPIO49, AF1) +#define GPIO43_MMC1_CLK MFP_CFG(GPIO43, AF1) +#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) +#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) + +/* LCD */ +#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) +#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) +#define GPIO61_LCD_DD1 MFP_CFG(GPIO61, AF1) +#define GPIO70_LCD_DD10 MFP_CFG(GPIO70, AF1) +#define GPIO71_LCD_DD11 MFP_CFG(GPIO71, AF1) +#define GPIO72_LCD_DD12 MFP_CFG(GPIO72, AF1) +#define GPIO73_LCD_DD13 MFP_CFG(GPIO73, AF1) +#define GPIO74_LCD_DD14 MFP_CFG(GPIO74, AF1) +#define GPIO75_LCD_DD15 MFP_CFG(GPIO75, AF1) +#define GPIO76_LCD_DD16 MFP_CFG(GPIO76, AF1) +#define GPIO77_LCD_DD17 MFP_CFG(GPIO77, AF1) +#define GPIO78_LCD_DD18 MFP_CFG(GPIO78, AF1) +#define GPIO79_LCD_DD19 MFP_CFG(GPIO79, AF1) +#define GPIO62_LCD_DD2 MFP_CFG(GPIO62, AF1) +#define GPIO80_LCD_DD20 MFP_CFG(GPIO80, AF1) +#define GPIO81_LCD_DD21 MFP_CFG(GPIO81, AF1) +#define GPIO82_LCD_DD22 MFP_CFG(GPIO82, AF1) +#define GPIO83_LCD_DD23 MFP_CFG(GPIO83, AF1) +#define GPIO63_LCD_DD3 MFP_CFG(GPIO63, AF1) +#define GPIO64_LCD_DD4 MFP_CFG(GPIO64, AF1) +#define GPIO65_LCD_DD5 MFP_CFG(GPIO65, AF1) +#define GPIO66_LCD_DD6 MFP_CFG(GPIO66, AF1) +#define GPIO67_LCD_DD7 MFP_CFG(GPIO67, AF1) +#define GPIO68_LCD_DD8 MFP_CFG(GPIO68, AF1) +#define GPIO69_LCD_DD9 MFP_CFG(GPIO69, AF1) +#define GPIO59_LCD_DENA_BIAS MFP_CFG(GPIO59, AF1) +#define GPIO56_LCD_FCLK_RD MFP_CFG(GPIO56, AF1) +#define GPIO57_LCD_LCLK_A0 MFP_CFG(GPIO57, AF1) +#define GPIO58_LCD_PCLK_WR MFP_CFG(GPIO58, AF1) +#define GPIO85_LCD_VSYNC MFP_CFG(GPIO85, AF1) + +/* I2S */ +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) + +#endif /* __ASM_MACH_MFP_PXA168_H */
arch/arm/mach-mmp/include/mach/mfp.h new file +37 -0
@@ -0,0 +1,37 @@ +#ifndef __ASM_MACH_MFP_H +#define __ASM_MACH_MFP_H + +#include <plat/mfp.h> + +/* +* NOTE: the MFPR register bit definitions on PXA168 processor lines are a +* bit different from those on PXA3xx. Bit [7:10] are now reserved, which +* were SLEEP_OE_N, SLEEP_DATA, SLEEP_SEL and the LSB of DRIVE bits. +* +* To cope with this difference and re-use the pxa3xx mfp code as much as +* possible, we make the following compromise: +* +* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) +* 2. DRIVE strength definitions redefined to include the reserved bit10 +* 3. Override MFP_CFG() and MFP_CFG_DRV() +* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() +*/ + +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + +#undef MFP_CFG +#undef MFP_CFG_DRV +#undef MFP_CFG_LPM +#undef MFP_CFG_X +#undef MFP_CFG_DEFAULT + +#define MFP_CFG (pin, af) \ + (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM) + +#define MFP_CFG_DRV (pin, af, drv) \ + (MFP_LPM_FLOAT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv) + +#endif /* __ASM_MACH_MFP_H */
arch/arm/mach-mmp/pxa168.c +15 -0
@@ -21,10 +21,23 @@#include <mach/irqs.h> #include <mach/gpio.h> #include <mach/dma.h> +#include <mach/mfp.h> #include "common.h" #include "clock.h" +#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) + +static struct mfp_addr_map pxa168_mfp_addr_map[]__initdata = +{ +MFP_ADDR_X (GPIO0 ,GPIO36 ,0x04c ), +MFP_ADDR_X (GPIO37 ,GPIO55 ,0x000 ), +MFP_ADDR_X (GPIO56 ,GPIO123 ,0x0e0 ), +MFP_ADDR_X (GPIO124 ,GPIO127 ,0x0f4 ), + +MFP_ADDR_END , +}; +#define APMASK (i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)static void __init pxa168_init_gpio (void )
@@ -64,6 +77,8 @@ static struct clk_lookup pxa168_clkregs[] = {static int __init pxa168_init (void ) {if (cpu_is_pxa168 ()) { +mfp_init_base (MFPR_VIRT_BASE ); +mfp_init_addr (pxa168_mfp_addr_map);pxa_init_dma (IRQ_PXA168_DMA_INT0 ,32 );clks_register (ARRAY_AND_SIZE (pxa168_clkregs)); }
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: accept old ARM926 compatible CPUID for pxa168
From: Eric Miao <[email protected]>
--- arch/arm/boot/compressed/head.S | 5 +++++ arch/arm/mm/Kconfig | 5 +++++ arch/arm/mm/proc-mohawk.S | 26 ++++++++++++++++++++++++++ 3 files changed, 36 insertions(+), 0 deletions(-)
arch/arm/boot/compressed/head.S +5 -0
@@ -630,8 +630,13 @@ proc_types: b __armv4_mmu_cache_off b __armv4_mmu_cache_flush +#ifdef CONFIG_CPU_MOHAWK_OLD_ID + .word 0x41159260 @ ARM926T (Marvell Mohawk) + .word 0xfffffff0 +#else .word 0x56158000 .word 0xff0ff000 +#endif b __armv4_mmu_cache_on b __armv4_mmu_cache_off b __armv5tej_mmu_cache_flush
arch/arm/mm/Kconfig +5 -0
@@ -351,6 +351,11 @@ config CPU_MOHAWK select CPU_TLB_V4WBI if MMU select CPU_COPY_V4WB if MMU +config CPU_MOHAWK_OLD_ID + bool "Accept Mohawk ARM926 Compatible CPUID" + depends on CPU_MOHAWK && !CPU_ARM926T + default y + # Feroceon config CPU_FEROCEON bool
arch/arm/mm/proc-mohawk.S +26 -0
@@ -395,6 +395,32 @@ cpu_pxa168_name: .section ".proc.info.init", #alloc, #execinstr +#ifdef CONFIG_CPU_MOHAWK_OLD_ID + .type __mohawk_old_id_proc_info,#object + .long 0x41159260 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + .long PMD_TYPE_SECT | \ + PMD_BIT4 | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __mohawk_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_mohawk_name + .long mohawk_processor_functions + .long v4wbi_tlb_fns + .long v4wb_user_fns + .long mohawk_cache_fns + .size __pxa168_proc_info, . - __pxa168_proc_info +#endif + .type __pxa168_proc_info,#object __pxa168_proc_info: .long 0x56158400 @ Marvell PXA168
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: allow reuse of serial driver for pxa168
From: Eric Miao <[email protected]>
--- drivers/serial/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/serial/Kconfig +1 -1
@@ -628,7 +628,7 @@ config SERIAL_MPSC_CONSOLE config SERIAL_PXA bool "PXA serial port support" - depends on ARM && ARCH_PXA + depends on ARCH_PXA || ARCH_MMP select SERIAL_CORE help If you have a machine based on an Intel XScale PXA2xx CPU you
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa/zylonite2: add support for console uart
From: Eric Miao <[email protected]>
--- arch/arm/mach-mmp/zylonite2.c | 12 ++++++++++++ 1 files changed, 12 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/zylonite2.c +12 -0
@@ -9,15 +9,27 @@*/ #include <linux/init.h> +#include <linux/kernel.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> +#include <mach/mfp-pxa168.h> +#include <mach/pxa168.h> #include "common.h" +static unsigned long zylonite2_pin_config[]__initdata = { +/* UART1 */ +GPIO107_UART1_RXD , +GPIO108_UART1_TXD , +}; +static void __init zylonite2_init (void ) { +mfp_config (ARRAY_AND_SIZE (zylonite2_pin_config)); + +pxa168_add_uart1 (); }MACHINE_START (ZYLONITE2 ,"PXA168-based Zylonite2 Development Platform" )
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa/zylonite2: add support for debug ethernet
From: Eric Miao <[email protected]>
--- arch/arm/mach-mmp/zylonite2.c | 63 +++++++++++++++++++++++++++++++++++++++++ drivers/net/smc91x.h | 1 + 2 files changed, 64 insertions(+), 0 deletions(-)
arch/arm/mach-mmp/zylonite2.c +63 -0
@@ -10,26 +10,89 @@#include <linux/init.h> #include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/smc91x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/addr-map.h> #include <mach/mfp-pxa168.h> #include <mach/pxa168.h> +#include <mach/gpio.h> #include "common.h" static unsigned long zylonite2_pin_config[]__initdata = { +/* Data Flash Interface */ +GPIO0_DFI_D15 , +GPIO1_DFI_D14 , +GPIO2_DFI_D13 , +GPIO3_DFI_D12 , +GPIO4_DFI_D11 , +GPIO5_DFI_D10 , +GPIO6_DFI_D9 , +GPIO7_DFI_D8 , +GPIO8_DFI_D7 , +GPIO9_DFI_D6 , +GPIO10_DFI_D5 , +GPIO11_DFI_D4 , +GPIO12_DFI_D3 , +GPIO13_DFI_D2 , +GPIO14_DFI_D1 , +GPIO15_DFI_D0 , + +/* Static Memory Controller */ + GPIO18_SMC_nCS0, + GPIO34_SMC_nCS1, + GPIO23_SMC_nLUA, + GPIO25_SMC_nLLA, +GPIO28_SMC_RDY , +GPIO29_SMC_SCLK , +GPIO35_SMC_BE1 , +GPIO36_SMC_BE2 , +GPIO27_GPIO ,/* Ethernet IRQ */ +/* UART1 */ GPIO107_UART1_RXD ,GPIO108_UART1_TXD , }; +static struct smc91x_platdata zylonite2_smc91x_info = { + .flags =SMC91X_USE_16BIT |SMC91X_NOWAIT , +}; + +static struct resource smc91x_resources[] = { + [0 ] = { + .start =SMC_CS1_PHYS_BASE +0x300 , + .end =SMC_CS1_PHYS_BASE +0xfffff , + .flags =IORESOURCE_MEM , + }, + [1 ] = { + .start =gpio_to_irq (27 ), + .end =gpio_to_irq (27 ), + .flags =IORESOURCE_IRQ |IORESOURCE_IRQ_HIGHEDGE , + } +}; + +static struct platform_device smc91x_device = { + .name ="smc91x" , + .id =0 , + .dev = { + .platform_data = &zylonite2_smc91x_info, + }, + .num_resources =ARRAY_SIZE (smc91x_resources), + .resource = smc91x_resources, +}; +static void __init zylonite2_init (void ) {mfp_config (ARRAY_AND_SIZE (zylonite2_pin_config)); +/* on-chip devices */ pxa168_add_uart1 (); + +/* off-chip devices */ +platform_device_register (&smc91x_device); }MACHINE_START (ZYLONITE2 ,"PXA168-based Zylonite2 Development Platform" )
drivers/net/smc91x.h +1 -0
@@ -44,6 +44,7 @@defined (CONFIG_MACH_MAINSTONE ) ||\defined (CONFIG_MACH_ZYLONITE ) ||\defined (CONFIG_MACH_LITTLETON ) ||\ +defined (CONFIG_MACH_ZYLONITE2 ) ||\ defined(CONFIG_ARCH_VIPER)#include <asm/mach-types.h>
Signature · 1 line
1.6.0.4
PATCH 1/1 pxa: add defconfig for pxa168-based platforms
From: Eric Miao <[email protected]>
Instead of having various pieces of defconfig files for different platforms, let's group them into a single one.
--- arch/arm/configs/pxa168_defconfig | 888 +++++++++++++++++++++++++++++++++++++ 1 files changed, 888 insertions(+), 0 deletions(-) create mode 100644 arch/arm/configs/pxa168_defconfig
arch/arm/configs/pxa168_defconfig new file +888 -0
@@ -0,0 +1,888 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc3 +# Thu Feb 19 17:33:03 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +CONFIG_ARCH_MMP=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Marvell PXA168 Implmentations +# +CONFIG_MACH_ZYLONITE2=y +CONFIG_CPU_PXA168=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_MOHAWK=y +CONFIG_CPU_MOHAWK_OLD_ID=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y
Signature · 1 line
1.6.0.4
PATCH 1/1 MAINTAINERS: update pxa168 maintainers
From: Eric Miao <[email protected]>
--- MAINTAINERS | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
MAINTAINERS +8 -0
@@ -3534,6 +3534,14 @@ M: [email protected] L: [email protected] (subscribers-only) S: Maintained +PXA168 SUPPORT +P: Eric Miao +M: [email protected] +P: Jason Chagas +M: [email protected] +L: [email protected] (subscribers-only) +S: Supported + PXA MMCI DRIVER S: Orphan
Signature · 1 line
1.6.0.4
RE: [PATCH] MAINTAINERS: update pxa168 maintainers
Quoted 35 lines
-----Original Message-----
From: Eric Miao [mailto:[email protected]]
Sent: Thursday, February 19, 2009 8:46 AM
To: LKML
Cc: linux-arm-kernel; Eric Miao; Jason Chagas
Subject: [PATCH]MAINTAINERS: update pxa168 maintainersFrom: Eric Miao <[email protected]>
Signed-off-by Eric Miao <[email protected]>Cc Jason Chagas <[email protected]>--- MAINTAINERS | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)MAINTAINERS +0
-0@@ -3534,6 +3534,14 @@ M: [email protected] L: [email protected] (subscribers-only)S: Maintained
MAINTAINERS +8
-1+PXA168 SUPPORT +P: Eric Miao +M: [email protected] +P: Jason Chagas +M: [email protected] +L: [email protected] (subscribers-only) +S: Supported + PXA MMCI DRIVER S: Orphan --
Quoted 1 line
1.6.0.4
Re: [PATCH] MAINTAINERS: update pxa168 maintainers
Quoted 11 lines
Quoted 11 lines
MAINTAINERS +8
-0+PXA168 SUPPORT +P: Eric Miao +M: [email protected] +P: Jason Chagas +M: [email protected] +L: [email protected] (subscribers-only) +S: Supported + PXA MMCI DRIVER S: Orphan
Quoted 5 lines
Quoted 2 lines
--
1.6.0.4Acked-by Jason Chagas <[email protected]>
Updated, thanks.
Quoted 12 lines · Eric Miao
This patch set adds base support for Marvell's PXA168 application processor.
Excerpt from Marvell's PXA168 Product Brief:
"""The Marvell(R) PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost ... """
Quoted 4 lines
For more information, please see
FYI, those who are interested in the git repository, please check:
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git pxa168
Signature · 2 lines
Cheers - eric