improve the first percpu chunk allocation
Subsystems (7)
Tejun Heo
maintainerPATCH 1/1 improve the first percpu chunk allocation
Hello, all.
This patchset improves the first percpu chunk allocation. The problem is that the dynamic percpu area allocation maps the whole percpu area into vmalloc area using 4k mappings which adds considerable amount of TLB pressure.
This patchset modularizes the first percpu chunk allocation and uses different allocation schemes to optimize TLB usage.
* On !NUMA, the first chunk is allocated directly using alloc_bootmem() thus adding no TLB pressure whatsoever.
* On NUMA, the first chunk is remapped using large pages and whatever is left in the large page is given back to the bootmem allocator. This makes each cpu use an additional large TLB entry for the first chunk but still is much better than using many 4k TLB entries.
This patchset contains the following ten patches.
0001-percpu-fix-pcpu_chunk_struct_size.patch 0002-bootmem-clean-up-arch-specific-bootmem-wrapping.patch 0003-bootmem-reorder-interface-functions-and-add-a-missi.patch 0004-vmalloc-add-align-to-vm_area_register_early.patch 0005-x86-update-populate_extra_pte-and-add-populate_ex.patch 0006-percpu-remove-unit_size-power-of-2-restriction.patch 0007-percpu-give-more-latitude-to-arch-specific-first-ch.patch 0008-x86-separate-out-setup_pcpu_4k-from-setup_per_cpu.patch 0009-x86-add-embedding-percpu-first-chunk-allocator.patch 0010-x86-add-remapping-percpu-first-chunk-allocator.patch
0001 fixes a bug introduced by earlier patch. 0002-0006 prepares for better first chunk allocation. 0007 updates make percpu allocator initialization more flexible. 0008-0010 modularizes and adds better allocation schemes for x86.
This patchset is available in the following git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git tj-percpu
Diffstat follows.
arch/alpha/mm/init.c | 2 arch/avr32/Kconfig | 2 arch/x86/Kconfig | 2 arch/x86/include/asm/mmzone_32.h | 43 ---- arch/x86/include/asm/pgtable.h | 3 arch/x86/kernel/setup_percpu.c | 373 ++++++++++++++++++++++++++++++++++----- arch/x86/mm/init_32.c | 13 + arch/x86/mm/init_64.c | 75 ++++--- include/linux/bootmem.h | 36 +-- include/linux/percpu.h | 39 +++- include/linux/vmalloc.h | 2 mm/bootmem.c | 14 + mm/percpu.c | 178 +++++++++++++----- mm/vmalloc.c | 11 - 14 files changed, 607 insertions(+), 186 deletions(-)
Thanks.
--
tejun
Tejun Heo
maintainerPATCH 1/10 percpu: fix pcpu_chunk_struct_size
Impact: fix short allocation leading to memory corruption
While dropping rvalue wrapping macros around global parameters, pcpu_chunk_struct_size was set incorrectly resulting in shorter page pointer array. Fix it.
--- mm/percpu.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
mm/percpu.c +1 -1
@@ -850,7 +850,7 @@ size_t __init pcpu_setup_static(pcpu_populate_pte_fn_t populate_pte_fn, pcpu_chunk_size =num_possible_cpus () * pcpu_unit_size; pcpu_nr_slots =pcpu_size_to_slot (pcpu_unit_size) +1 ; pcpu_chunk_struct_size =sizeof (struct pcpu_chunk ) - + (1 << pcpu_unit_pages_shift) *sizeof (struct page *); + +num_possible_cpus () * pcpu_unit_pages *sizeof (struct page *);/* allocate chunk slots */ pcpu_slot =alloc_bootmem (pcpu_nr_slots *sizeof (pcpu_slot[0 ]));
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 2/10 bootmem: clean up arch-specific bootmem wrapping
In reply to Tejun HeoImpact: cleaner and consistent bootmem wrapping
By setting CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define arch-specific wrappers for bootmem allocation. However, this is done a bit strangely in that only the high level convenience macros can be changed while lower level, but still exported, interface functions can't be wrapped. This not only is messy but also leads to strange situation where alloc_bootmem() does what the arch wants it to do but the equivalent __alloc_bootmem() call doesn't although they should be able to be used interchangeably.
This patch updates bootmem such that archs can override / wrap the backend function - alloc_bootmem_core() instead of the highlevel interface functions to allow simpler and consistent wrapping. Also, HAVE_ARCH_BOOTMEM_NODE is renamed to HAVE_ARCH_BOOTMEM.
--- arch/avr32/Kconfig | 2 +- arch/x86/Kconfig | 2 +- arch/x86/include/asm/mmzone_32.h | 43 ++++--------------------------------- include/linux/bootmem.h | 10 +++----- mm/bootmem.c | 14 +++++++++-- 5 files changed, 22 insertions(+), 49 deletions(-)
arch/avr32/Kconfig +1 -1
@@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt" config QUICKLIST def_bool y -config HAVE_ARCH_BOOTMEM_NODE +config HAVE_ARCH_BOOTMEM def_bool n config ARCH_HAVE_MEMORY_PRESENT
arch/x86/Kconfig +1 -1
@@ -1111,7 +1111,7 @@ config NODES_SHIFT Specify the maximum number of NUMA Nodes available on the target system. Increases memory reserved to accomodate various tables. -config HAVE_ARCH_BOOTMEM_NODE +config HAVE_ARCH_BOOTMEM def_bool y depends on X86_32 && NUMA
arch/x86/include/asm/mmzone_32.h +5 -38
50 lines not on this page · raw message
include/linux/bootmem.h +4 -6
@@ -69,10 +69,9 @@ extern int reserve_bootmem_node(pg_data_t *pgdat,unsigned long physaddr, unsigned long size, int flags); -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE -extern int reserve_bootmem (unsigned long addr,unsigned long size,int flags); -#endif - +extern int reserve_bootmem (unsigned long addr, +unsigned long size, +int flags);extern void *__alloc_bootmem_nopanic (unsigned long size,unsigned long align,unsigned long goal);
@@ -94,7 +93,7 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,unsigned long size, unsigned long align, unsigned long goal); -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE +#define alloc_bootmem (x) \ __alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_nopanic (x) \
@@ -113,7 +112,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, __alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_low_pages_node (pgdat, x) \ __alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0) -#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ extern int reserve_bootmem_generic (unsigned long addr,unsigned long size,int flags);
mm/bootmem.c +11 -3
@@ -37,6 +37,16 @@ static struct list_head bdata_list __initdata = LIST_HEAD_INIT(bdata_list);static int bootmem_debug; +/* +* If an arch needs to apply workarounds to bootmem allocation, it can +* set CONFIG_HAVE_ARCH_BOOTMEM and define a wrapper around +* __alloc_bootmem_core(). +*/ +#ifndef CONFIG_HAVE_ARCH_BOOTMEM +#define alloc_bootmem_core (bdata, size, align, goal, limit) \ + __alloc_bootmem_core((bdata), (size), (align), (goal), (limit)) +#endif +static int __init bootmem_debug_setup (char *buf) { bootmem_debug =1 ;
@@ -382,7 +392,6 @@ int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,return mark_bootmem_node (pgdat->bdata, start, end,1 , flags); } -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE /** * reserve_bootmem - mark a page range as usable * @addr: starting address of the range
@@ -403,7 +412,6 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,return mark_bootmem (start, end,1 , flags); } -#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ static unsigned long align_idx (struct bootmem_data *bdata,unsigned long idx,unsigned long step)
@@ -428,7 +436,7 @@ static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,return ALIGN (base + off, align) - base; } -static void *__init alloc_bootmem_core (struct bootmem_data *bdata, +static void *__init __alloc_bootmem_core (struct bootmem_data *bdata,unsigned long size,unsigned long align,unsigned long goal,unsigned long limit) {
Signature · 1 line
1.6.0.2
Re: [PATCH 02/10] bootmem: clean up arch-specific bootmem wrapping
Quoted 96 lines · Tejun Heo
Impact: cleaner and consistent bootmem wrapping
By setting
CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define arch-specific wrappers for bootmem allocation. However, this is done a bit strangely in that only the high level convenience macros can be changed while lower level, but still exported, interface functions can't be wrapped. This not only is messy but also leads to strange situation wherealloc_bootmem()does what the arch wants it to do but the equivalent__alloc_bootmem()call doesn't although they should be able to be used interchangeably.This patch updates bootmem such that archs can override / wrap the backend function -
alloc_bootmem_core()instead of the highlevel interface functions to allow simpler and consistent wrapping. Also,HAVE_ARCH_BOOTMEM_NODEis renamed toHAVE_ARCH_BOOTMEM.Signed-off-by Tejun Heo <[email protected]>Cc Johannes Weiner <[email protected]>--- arch/avr32/Kconfig | 2 +- arch/x86/Kconfig | 2 +- arch/x86/include/asm/mmzone_32.h | 43 ++++--------------------------------- include/linux/bootmem.h | 10 +++----- mm/bootmem.c | 14 +++++++++-- 5 files changed, 22 insertions(+), 49 deletions(-)arch/avr32/Kconfig +1
-1@@ -181,7 +181,7 @@ source "kernel/Kconfig.preempt" config QUICKLIST def_bool y -config HAVE_ARCH_BOOTMEM_NODE +config HAVE_ARCH_BOOTMEM def_bool n config ARCH_HAVE_MEMORY_PRESENTarch/x86/Kconfig +1
-1@@ -1111,7 +1111,7 @@ config NODES_SHIFT Specify the maximum number of NUMA Nodes available on the target system. Increases memory reserved to accomodate various tables. -config HAVE_ARCH_BOOTMEM_NODE +config HAVE_ARCH_BOOTMEM def_bool y depends on X86_32 && NUMAarch/x86/include/asm/mmzone_32.h +1
-35@@ -93,45 +93,12 @@ static inline int pfn_valid(int pfn)#endif /* CONFIG_DISCONTIGMEM */ #ifdef CONFIG_NEED_MULTIPLE_NODES - -/* -* Following are macros that are specific to this numa platform. -*/ -#define reserve_bootmem (addr, size, flags) \ - reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags)) -#define alloc_bootmem (x) \ - __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) -#define alloc_bootmem_nopanic (x) \ - __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \ - __pa(MAX_DMA_ADDRESS)) -#define alloc_bootmem_low (x) \ - __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0) -#define alloc_bootmem_pages (x) \ - __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) -#define alloc_bootmem_pages_nopanic (x) \ - __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \ - __pa(MAX_DMA_ADDRESS)) -#define alloc_bootmem_low_pages (x) \ - __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) -#define alloc_bootmem_node (pgdat, x) \ -({ \ - struct pglist_data __maybe_unused \ - *__alloc_bootmem_node__pgdat = (pgdat); \ - __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, \ - __pa(MAX_DMA_ADDRESS)); \ -}) -#define alloc_bootmem_pages_node (pgdat, x) \ -({ \ - struct pglist_data __maybe_unused \ - *__alloc_bootmem_node__pgdat = (pgdat); \ - __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, \ - __pa(MAX_DMA_ADDRESS)); \ -}) -#define alloc_bootmem_low_pages_node (pgdat, x) \ +/* always use node 0 for bootmem on this numa platform */
arch/x86/include/asm/mmzone_32.h static inline int pfn_valid(int pfn) · line 103
Quoted 10 lines
arch/x86/include/asm/mmzone_32.h +4
-3+#define alloc_bootmem_core (__bdata, size, align, goal, limit) \ ({ \ - struct pglist_data __maybe_unused \ - *__alloc_bootmem_node__pgdat = (pgdat); \ -__alloc_bootmem_node (NODE_DATA (0 ), (x),PAGE_SIZE ,0 ); \ + bootmem_data_t __maybe_unused * __abm_bdata_dummy = (__bdata); \ + __alloc_bootmem_core(NODE_DATA(0)->bdata, \ + (size), (align), (goal), (limit)); \ })#endif /* CONFIG_NEED_MULTIPLE_NODES */
This won't suffice as reserve_bootmem() doesn't use alloc_bootmem_core(), so now you effectively removed the node-0 restriction for reserve_bootmem() on this configuration.
I wonder why this setup wants to register several bootmem nodes but only use node 0, anyway. Does someone remember? :)
Quoted 73 lines
include/linux/bootmem.h +4
-6@@ -69,10 +69,9 @@ extern int reserve_bootmem_node(pg_data_t *pgdat,unsigned long physaddr, unsigned long size, int flags); -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE -extern int reserve_bootmem (unsigned long addr,unsigned long size,int flags); -#endif - +extern int reserve_bootmem (unsigned long addr, +unsigned long size, +int flags);extern void *__alloc_bootmem_nopanic (unsigned long size,unsigned long align,unsigned long goal);@@ -94,7 +93,7 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,unsigned long size, unsigned long align, unsigned long goal); -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE +#define alloc_bootmem (x) \ __alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_nopanic (x) \@@ -113,7 +112,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, __alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_low_pages_node (pgdat, x) \ __alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0) -#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ extern int reserve_bootmem_generic (unsigned long addr,unsigned long size,int flags);mm/bootmem.c +10
-2@@ -37,6 +37,16 @@ static struct list_head bdata_list __initdata = LIST_HEAD_INIT(bdata_list);static int bootmem_debug; +/* +* If an arch needs to apply workarounds to bootmem allocation, it can +* set CONFIG_HAVE_ARCH_BOOTMEM and define a wrapper around +* __alloc_bootmem_core(). +*/ +#ifndef CONFIG_HAVE_ARCH_BOOTMEM +#define alloc_bootmem_core (bdata, size, align, goal, limit) \ + __alloc_bootmem_core((bdata), (size), (align), (goal), (limit)) +#endif +static int __init bootmem_debug_setup (char *buf) { bootmem_debug =1 ;@@ -382,7 +392,6 @@ int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,return mark_bootmem_node (pgdat->bdata, start, end,1 , flags); } -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE /** * reserve_bootmem - mark a page range as usable * @addr: starting address of the range @@ -403,7 +412,6 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,return mark_bootmem (start, end,1 , flags); } -#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ static unsigned long align_idx (struct bootmem_data *bdata,unsigned long idx,unsigned long step)
mm/bootmem.c static unsigned long align_off(struct bootmem_data *bdata, unsigned long off, · line 441
Quoted 7 lines
mm/bootmem.c +1
-1@@ -428,7 +436,7 @@ static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,return ALIGN (base + off, align) - base; } -static void *__init alloc_bootmem_core (struct bootmem_data *bdata, +static void *__init __alloc_bootmem_core (struct bootmem_data *bdata,unsigned long size,unsigned long align,unsigned long goal,unsigned long limit)
static but you refer to it in arch/x86/include/mmzone_32.h.
Hannes
Tejun Heo
maintainerRe: [PATCH 02/10] bootmem: clean up arch-specific bootmem wrapping
Hello,
Quoted 3 lines · Johannes Weiner
This won't suffice as
reserve_bootmem()doesn't usealloc_bootmem_core(), so now you effectively removed the node-0 restriction forreserve_bootmem()on this configuration.
Ah... right. :-(
Quoted 3 lines
I wonder why this setup wants to register several bootmem nodes but only use node 0, anyway. Does someone remember? :)
...
Quoted 6 lines
mm/bootmem.c static unsigned long align_off(struct bootmem_data *bdata, unsigned long off, · line 441
Quoted 4 lines
mm/bootmem.c +1
-1-static void *__init alloc_bootmem_core (struct bootmem_data *bdata, +static void *__init __alloc_bootmem_core (struct bootmem_data *bdata,unsigned long size,unsigned long align,unsigned long goal,unsigned long limit)static but you refer to it in
arch/x86/include/mmzone_32.h.
Yeah, that's why it's a macro. I thought about putting it into a separate header file, say, asm/bootmem-wrapper.h and including it only from bootmem.c but it looked like an overkill, so...
Thanks.
Signature · 1 line
tejun
Tejun Heo
maintainerPATCH 3/10 bootmem: reorder interface functions and add a missing one
In reply to Tejun HeoImpact: cleanup and addition of missing interface wrapper
The interface functions in bootmem.h was ordered in not so orderly manner. Reorder them such that
* functions allocating the same area group together - ie. alloc_bootmem group and alloc_bootmem_low group.
* functions w/o node parameter come before the ones w/ node parameter.
* nopanic variants are immediately below their panicky counterparts.
While at it, add alloc_bootmem_pages_node_nopanic() which was missing.
--- include/linux/bootmem.h | 30 +++++++++++++++++------------- 1 files changed, 17 insertions(+), 13 deletions(-)
include/linux/bootmem.h +17 -13
@@ -65,22 +65,20 @@ extern void free_bootmem(unsigned long addr, unsigned long size);#define BOOTMEM_DEFAULT 0#define BOOTMEM_EXCLUSIVE (1<<0) -extern int reserve_bootmem_node (pg_data_t *pgdat, -unsigned long physaddr, -unsigned long size, -int flags);extern int reserve_bootmem (unsigned long addr,unsigned long size,int flags); -extern void *__alloc_bootmem_nopanic (unsigned long size, +extern int reserve_bootmem_node (pg_data_t *pgdat, +unsigned long physaddr, +unsigned long size, +int flags); + +extern void *__alloc_bootmem (unsigned long size,unsigned long align,unsigned long goal); -extern void *__alloc_bootmem (unsigned long size, +extern void *__alloc_bootmem_nopanic (unsigned long size,unsigned long align,unsigned long goal); -extern void *__alloc_bootmem_low (unsigned long size, -unsigned long align, -unsigned long goal); extern void *__alloc_bootmem_node(pg_data_t *pgdat, unsigned long size, unsigned long align,
@@ -89,6 +87,9 @@ extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat,unsigned long size, unsigned long align, unsigned long goal); +extern void *__alloc_bootmem_low (unsigned long size, +unsigned long align, +unsigned long goal); extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size, unsigned long align,
@@ -98,18 +99,21 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, __alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_nopanic (x) \ __alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) -#define alloc_bootmem_low (x) \ - __alloc_bootmem_low(x, SMP_CACHE_BYTES, 0)#define alloc_bootmem_pages (x) \ __alloc_bootmem(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_pages_nopanic (x) \ __alloc_bootmem_nopanic(x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) -#define alloc_bootmem_low_pages (x) \ - __alloc_bootmem_low(x, PAGE_SIZE, 0)#define alloc_bootmem_node (pgdat, x) \ __alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))#define alloc_bootmem_pages_node (pgdat, x) \ __alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_pages_node_nopanic (pgdat, x) \ + __alloc_bootmem_node_nopanic(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) + +#define alloc_bootmem_low (x) \ + __alloc_bootmem_low(x, SMP_CACHE_BYTES, 0) +#define alloc_bootmem_low_pages (x) \ + __alloc_bootmem_low(x, PAGE_SIZE, 0)#define alloc_bootmem_low_pages_node (pgdat, x) \ __alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0)
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 4/10 vmalloc: add @align to vm_area_register_early()
In reply to Tejun HeoImpact: allow larger alignment for early vmalloc area allocation
Some early vmalloc users might want larger alignment, for example, for custom large page mapping. Add @align to vm_area_register_early(). While at it, drop docbook comment on non-existent @size.
--- arch/alpha/mm/init.c | 2 +- include/linux/vmalloc.h | 2 +- mm/percpu.c | 2 +- mm/vmalloc.c | 11 +++++++---- 4 files changed, 10 insertions(+), 7 deletions(-)
arch/alpha/mm/init.c +1 -1
@@ -200,7 +200,7 @@ callback_init(void * kernel_end)/* register the vm area */ console_remap_vm.flags =VM_ALLOC ; console_remap_vm.size = nr_pages <<PAGE_SHIFT ; -vm_area_register_early (&console_remap_vm); +vm_area_register_early (&console_remap_vm,PAGE_SIZE ); vaddr = (unsigned long )consle_remap_vm.addr;
include/linux/vmalloc.h +1 -1
@@ -109,6 +109,6 @@ extern long vwrite(char *buf, char *addr, unsigned long count);*/ extern rwlock_t vmlist_lock;extern struct vm_struct *vmlist; -extern __init void vm_area_register_early (struct vm_struct *vm); +extern __init void vm_area_register_early (struct vm_struct *vm,size_t align);#endif /* _LINUX_VMALLOC_H */
mm/percpu.c +1 -1
@@ -860,7 +860,7 @@ size_t __init pcpu_setup_static(pcpu_populate_pte_fn_t populate_pte_fn,/* init and register vm area */ static_vm.flags =VM_ALLOC ; static_vm.size = pcpu_chunk_size; -vm_area_register_early (&static_vm); +vm_area_register_early (&static_vm,PAGE_SIZE );/* init static_chunk */ static_chunk =alloc_bootmem (pcpu_chunk_struct_size);
mm/vmalloc.c +7 -4
@@ -995,7 +995,7 @@ EXPORT_SYMBOL(vm_map_ram);/** * vm_area_register_early - register vmap area early during boot * @vm: vm_struct to register -* @size: size of area to register +* @align: requested alignment * * This function is used to register kernel vm area before * vmalloc_init() is called. @vm->size and @vm->flags should contain
@@ -1004,12 +1004,15 @@ EXPORT_SYMBOL(vm_map_ram);* * DO NOT USE THIS FUNCTION UNLESS YOU KNOW WHAT YOU'RE DOING. */ -void __init vm_area_register_early (struct vm_struct *vm) +void __init vm_area_register_early (struct vm_struct *vm,size_t align) {static size_t vm_init_off__initdata ; +unsigned long addr; + + addr =ALIGN (VMALLOC_START + vm_init_off, align); + vm_init_off =PFN_ALIGN (addr + vm->size) -VMALLOC_START ; - vm->addr = (void *)VMALLOC_START + vm_init_off; - vm_init_off =PFN_ALIGN (vm_init_off + vm->size); + vm->addr = (void *)addr; vm->next = vmlist; vmlist = vm;
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 5/10 x86: update populate_extra_pte() and add populate_extra_pmd()
In reply to Tejun HeoImpact: minor change to populate_extra_pte() and addition of pmd flavor
Update populate_extra_pte() to return pointer to the pte_t for the specified address and add populate_extra_pmd() which only populates till the pmd and returns pointer to the pmd entry for the address.
For 64bit, pud/pmd/pte fill functions are separated out from set_pte_vaddr[_pud]() and used for set_pte_vaddr[_pud]() and populate_extra_{pte|pmd}().
--- arch/x86/include/asm/pgtable.h | 3 +- arch/x86/kernel/setup_percpu.c | 7 +++- arch/x86/mm/init_32.c | 13 +++++-- arch/x86/mm/init_64.c | 75 ++++++++++++++++++++++++---------------- 4 files changed, 63 insertions(+), 35 deletions(-)
arch/x86/include/asm/pgtable.h +2 -1
@@ -402,7 +402,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,/* Install a pte for a particular vaddr in kernel space. */ void set_pte_vaddr (unsigned long vaddr,pte_t pte); -void populate_extra_pte (unsigned long vaddr); +pmd_t *populate_extra_pmd (unsigned long vaddr); +pte_t *populate_extra_pte (unsigned long vaddr);#ifdef CONFIG_X86_32 extern void native_pagetable_setup_start (pgd_t *base);
arch/x86/kernel/setup_percpu.c +6 -1
@@ -41,6 +41,11 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = { };EXPORT_SYMBOL (__per_cpu_offset); +static void __init pcpu4k_populate_pte (unsigned long addr) +{ +populate_extra_pte (addr); +} +static inline void setup_percpu_segment (int cpu) {#ifdef CONFIG_X86_32
@@ -104,7 +109,7 @@ void __init setup_per_cpu_areas(void) } } - pcpu_unit_size =pcpu_setup_static (populate_extra_pte, pages, size); + pcpu_unit_size =pcpu_setup_static (pcpu4k_populate_pte, pages, size);free_bootmem (__pa (pages), pages_size);
arch/x86/mm/init_32.c +10 -3
@@ -137,14 +137,21 @@ static pte_t * __init one_page_table_init(pmd_t *pmd)return pte_offset_kernel (pmd,0 ); } -void __init populate_extra_pte (unsigned long vaddr) +pmd_t *__init populate_extra_pmd (unsigned long vaddr) {int pgd_idx =pgd_index (vaddr);int pmd_idx =pmd_index (vaddr); + +return one_md_table_init (swapper_pg_dir + pgd_idx) + pmd_idx; +} + +pte_t *__init populate_extra_pte (unsigned long vaddr) +{ +int pte_idx =pte_index (vaddr);pmd_t *pmd; - pmd =one_md_table_init (swapper_pg_dir + pgd_idx); -one_page_table_init (pmd + pmd_idx); + pmd =populate_extra_pmd (vaddr); +return one_page_table_init (pmd) + pte_idx; } static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
arch/x86/mm/init_64.c +45 -30
110 lines not on this page · raw message
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 6/10 percpu: remove unit_size power-of-2 restriction
In reply to Tejun HeoImpact: allow unit_size to be arbitrary multiple of PAGE_SIZE
In dynamic percpu allocator, there is no reason the unit size should be power of two. Remove the restriction.
As non-power-of-two unit size means that empty chunks fall into the same slot index as lightly occupied chunks which is bad for reclaming. Reserve an extra slot for empty chunks.
--- mm/percpu.c | 33 +++++++++++++++++++-------------- 1 files changed, 19 insertions(+), 14 deletions(-)
mm/percpu.c +19 -14
@@ -67,7 +67,7 @@#include <asm/cacheflush.h> #include <asm/tlbflush.h> -#define PCPU_MIN_UNIT_PAGES_SHIFT 4/* also max alloc size */ +#define PCPU_MIN_UNIT_PAGES 16/* max alloc size in pages */ #define PCPU_SLOT_BASE_SHIFT 5/* 1-31 shares the same slot */ #define PCPU_DFL_MAP_ALLOC 16/* start a map with 16 ents */
@@ -83,9 +83,7 @@ struct pcpu_chunk {struct page *page[];/* #cpus * UNIT_PAGES */ }; -static int pcpu_unit_pages_shift;static int pcpu_unit_pages; -static int pcpu_unit_shift;static int pcpu_unit_size;static int pcpu_chunk_size;static int pcpu_nr_slots;
@@ -117,12 +115,19 @@ static DEFINE_MUTEX(pcpu_mutex);static struct list_head *pcpu_slot;/* chunk list slots */ static struct rb_root pcpu_addr_root =RB_ROOT ;/* chunks by address */ -static int pcpu_size_to_slot (int size) +static int __pcpu_size_to_slot (int size) {int highbit =fls (size);/* size is in bytes */ return max (highbit -PCPU_SLOT_BASE_SHIFT +2 ,1 ); } +static int pcpu_size_to_slot (int size) +{ +if (size == pcpu_unit_size) +return pcpu_nr_slots -1 ; +return __pcpu_size_to_slot (size); +} +static int pcpu_chunk_slot (const struct pcpu_chunk *chunk) {if (chunk->free_size <sizeof (int ) || chunk->contig_hint <sizeof (int ))
@@ -133,7 +138,7 @@ static int pcpu_chunk_slot(const struct pcpu_chunk *chunk)static int pcpu_page_idx (unsigned int cpu,int page_idx) { -return (cpu << pcpu_unit_pages_shift) + page_idx; +return cpu * pcpu_unit_pages + page_idx; } static struct page **pcpu_chunk_pagep(struct pcpu_chunk *chunk,
@@ -659,7 +664,7 @@ static int pcpu_populate_chunk(struct pcpu_chunk *chunk, int off, int size) goto err;for_each_possible_cpu (cpu) -memset (chunk->vm->addr + (cpu << pcpu_unit_shift) + off,0 , +memset (chunk->vm->addr + cpu * pcpu_unit_size + off,0 , size);return 0 ;
@@ -722,7 +727,7 @@ void *__alloc_percpu(size_t size, size_t align)struct pcpu_chunk *chunk;int slot, off; -if (unlikely (!size || size >PAGE_SIZE <<PCPU_MIN_UNIT_PAGES_SHIFT || +if (unlikely (!size || size >PCPU_MIN_UNIT_PAGES *PAGE_SIZE || align >PAGE_SIZE )) {WARN (true,"illegal size (%zu) or align (%zu) for " "percpu allocation\n" , size, align);
@@ -840,19 +845,19 @@ size_t __init pcpu_setup_static(pcpu_populate_pte_fn_t populate_pte_fn,unsigned int cpu;int err, i; - pcpu_unit_pages_shift =max_t (int,PCPU_MIN_UNIT_PAGES_SHIFT , -order_base_2 (cpu_size) -PAGE_SHIFT ); + pcpu_unit_pages =max_t (int,PCPU_MIN_UNIT_PAGES ,PFN_UP (cpu_size)); pcpu_static_size = cpu_size; - pcpu_unit_pages =1 << pcpu_unit_pages_shift; - pcpu_unit_shift =PAGE_SHIFT + pcpu_unit_pages_shift; - pcpu_unit_size =1 << pcpu_unit_shift; + pcpu_unit_size = pcpu_unit_pages <<PAGE_SHIFT ; pcpu_chunk_size =num_possible_cpus () * pcpu_unit_size; - pcpu_nr_slots =pcpu_size_to_slot (pcpu_unit_size) +1 ; pcpu_chunk_struct_size =sizeof (struct pcpu_chunk ) +num_possible_cpus () * pcpu_unit_pages *sizeof (struct page *); -/* allocate chunk slots */ +/* +* Allocate chunk slots. The additional last slot is for +* empty chunks. +*/ + pcpu_nr_slots =__pcpu_size_to_slot (pcpu_unit_size) +2 ; pcpu_slot =alloc_bootmem (pcpu_nr_slots *sizeof (pcpu_slot[0 ]));for (i =0 ; i < pcpu_nr_slots; i++)INIT_LIST_HEAD (&pcpu_slot[i]);
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 7/10 percpu: give more latitude to arch specific first chunk initialization
In reply to Tejun HeoImpact: more latitude for first percpu chunk allocation
The first percpu chunk serves the kernel static percpu area and may or may not contain extra room for further dynamic allocation. Initialization of the first chunk needs to be done before normal memory allocation service is up, so it has its own init path - pcpu_setup_static().
It seems archs need more latitude while initializing the first chunk for example to take advantage of large page mapping. This patch makes the following changes to allow this.
* Define PERCPU_DYNAMIC_RESERVE to give arch hint about how much space to reserve in the first chunk for further dynamic allocation.
* Rename pcpu_setup_static() to pcpu_setup_first_chunk().
* Make pcpu_setup_first_chunk() much more flexible by fetching page pointer by callback and adding optional @unit_size, @free_size and @base_addr arguments which allow archs to selectively part of chunk initialization to their likings.
--- arch/x86/kernel/setup_percpu.c | 15 ++++- include/linux/percpu.h | 39 ++++++++++- mm/percpu.c | 149 +++++++++++++++++++++++++++++++--------- 3 files changed, 167 insertions(+), 36 deletions(-)
arch/x86/kernel/setup_percpu.c +14 -1
@@ -41,6 +41,16 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = { };EXPORT_SYMBOL (__per_cpu_offset); +static struct page **pcpu4k_pages__initdata ; +static int pcpu4k_nr_static_pages__initdata ; + +static struct page *__init pcpu4k_get_page (unsigned int cpu,int pageno) +{ +if (pageno < pcpu4k_nr_static_pages) +return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno]; +return NULL ; +} +static void __init pcpu4k_populate_pte (unsigned long addr) {populate_extra_pte (addr);
@@ -109,7 +119,10 @@ void __init setup_per_cpu_areas(void) } } - pcpu_unit_size =pcpu_setup_static (pcpu4k_populate_pte, pages, size); + pcpu4k_pages = pages; + pcpu4k_nr_static_pages = nr_cpu_pages; + pcpu_unit_size =pcpu_setup_first_chunk (pcpu4k_get_page, size,0 ,0 , +NULL , pcpu4k_populate_pte);free_bootmem (__pa (pages), pages_size);
include/linux/percpu.h +37 -2
@@ -78,12 +78,47 @@#ifdef CONFIG_HAVE_DYNAMIC_PER_CPU_AREA +/* minimum unit size, also is the maximum supported allocation size */ +#define PCPU_MIN_UNIT_SIZE (16UL << PAGE_SHIFT) + +/* +* PERCPU_DYNAMIC_RESERVE indicates the amount of free area to piggy +* back on the first chunk if arch is manually allocating and mapping +* it for faster access (as a part of large page mapping for example). +* Note that dynamic percpu allocator covers both static and dynamic +* areas, so these values are bigger than PERCPU_MODULE_RESERVE. +* +* On typical configuration with modules, the following values leave +* about 8k of free space on the first chunk after boot on both x86_32 +* and 64 when module support is enabled. When module support is +* disabled, it's much tighter. +*/ +#ifndef PERCPU_DYNAMIC_RESERVE +# if BITS_PER_LONG >32 +# ifdef CONFIG_MODULES +# define PERCPU_DYNAMIC_RESERVE (6 << PAGE_SHIFT) +# else +# define PERCPU_DYNAMIC_RESERVE (4 << PAGE_SHIFT) +# endif +# else +# ifdef CONFIG_MODULES +# define PERCPU_DYNAMIC_RESERVE (4 << PAGE_SHIFT) +# else +# define PERCPU_DYNAMIC_RESERVE (2 << PAGE_SHIFT) +# endif +# endif +#endif /* PERCPU_DYNAMIC_RESERVE */ +extern void *pcpu_base_addr; +typedef struct page * (*pcpu_get_page_fn_t )(unsigned int cpu,int pageno);typedef void (*pcpu_populate_pte_fn_t )(unsigned long addr); -extern size_t __init pcpu_setup_static (pcpu_populate_pte_fn_t populate_pte_fn, -struct page **pages,size_t cpu_size); +extern size_t __init pcpu_setup_first_chunk (pcpu_get_page_fn_t get_page_fn, +size_t static_size,size_t unit_size, +size_t free_size,void *base_addr, +pcpu_populate_pte_fn_t populate_pte_fn); +/* * Use this to get to a cpu's version of the per-cpu object * dynamically allocated. Non-atomic access to the current CPU's
mm/percpu.c +116 -33
225 lines not on this page · raw message
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 8/10 x86: separate out setup_pcpu_4k() from setup_per_cpu_areas()
In reply to Tejun HeoImpact: modularize percpu first chunk allocation
x86 is gonna have a few different strategies for the first chunk allocation. Modularize it by separating out the current allocation mechanism into pcpu_alloc_bootmem() and setup_pcpu_4k().
--- arch/x86/kernel/setup_percpu.c | 144 ++++++++++++++++++++++++++++------------ 1 files changed, 102 insertions(+), 42 deletions(-)
arch/x86/kernel/setup_percpu.c +102 -42
@@ -7,6 +7,7 @@#include <linux/crash_dump.h> #include <linux/smp.h> #include <linux/topology.h> +#include <linux/pfn.h> #include <asm/sections.h> #include <asm/processor.h> #include <asm/setup.h>
@@ -41,6 +42,52 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = { };EXPORT_SYMBOL (__per_cpu_offset); +/** +* pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu +* @cpu: cpu to allocate for +* @size: size allocation in bytes +* @align: alignment +* +* Allocate @size bytes aligned at @align for cpu @cpu. This wrapper +* does the right thing for NUMA regardless of the current +* configuration. +* +* RETURNS: +* Pointer to the allocated area on success, NULL on failure. +*/ +static void *__init pcpu_alloc_bootmem (unsigned int cpu,unsigned long size, +unsigned long align) +{ +const unsigned long goal =__pa (MAX_DMA_ADDRESS ); +#ifdef CONFIG_NEED_MULTIPLE_NODES +int node =early_cpu_to_node (cpu); +void *ptr; + +if (!node_online (node) || !NODE_DATA (node)) { + ptr =__alloc_bootmem_nopanic (size, align, goal); +pr_info ("cpu %d has no node %d or node-local memory\n" , + cpu, node); +pr_debug ("per cpu data for cpu%d %lu bytes at %016lx\n" , + cpu, size,__pa (ptr)); + }else { + ptr =__alloc_bootmem_node_nopanic (NODE_DATA (node), + size, align, goal); +pr_debug ("per cpu data for cpu%d %lu bytes on node%d at " +"%016lx\n" , cpu, size, node,__pa (ptr)); + } +return ptr; +#else +return __alloc_bootmem_nopanic (size, align, goal); +#endif +} + +/* +* 4k page allocator +* +* This is the basic allocator. Static percpu area is allocated +* page-by-page and most of initialization is done by the generic +* setup function. +*/ static struct page **pcpu4k_pages__initdata ;static int pcpu4k_nr_static_pages__initdata ;
@@ -56,6 +103,51 @@ static void __init pcpu4k_populate_pte(unsigned long addr)populate_extra_pte (addr); } +static ssize_t __init setup_pcpu_4k (size_t static_size) +{ +size_t pages_size; +unsigned int cpu; +int i, j; +ssize_t ret; + + pcpu4k_nr_static_pages =PFN_UP (static_size); + +/* unaligned allocations can't be freed, round up to page size */ + pages_size =PFN_ALIGN (pcpu4k_nr_static_pages *num_possible_cpus () + *sizeof (pcpu4k_pages[0 ])); + pcpu4k_pages =alloc_bootmem (pages_size); + +/* allocate and copy */ + j =0 ; +for_each_possible_cpu (cpu) +for (i =0 ; i < pcpu4k_nr_static_pages; i++) { +void *ptr; + + ptr =pcpu_alloc_bootmem (cpu,PAGE_SIZE ,PAGE_SIZE ); +if (!ptr) + goto enomem; + +memcpy (ptr, __per_cpu_load + i *PAGE_SIZE ,PAGE_SIZE ); + pcpu4k_pages[j++] =virt_to_page (ptr); + } + +/* we're ready, commit */ +pr_info ("PERCPU: Allocated %d 4k pages, static data %zu bytes\n" , + pcpu4k_nr_static_pages, static_size); + + ret =pcpu_setup_first_chunk (pcpu4k_get_page, static_size,0 ,0 ,NULL , + pcpu4k_populate_pte); + goto out_free_ar; + +enomem: +while (--j >=0 ) +free_bootmem (__pa (page_address (pcpu4k_pages[j])),PAGE_SIZE ); + ret = -ENOMEM ; +out_free_ar: +free_bootmem (__pa (pcpu4k_pages), pages_size); +return ret; +} +static inline void setup_percpu_segment (int cpu) {#ifdef CONFIG_X86_32
@@ -76,56 +168,24 @@ static inline void setup_percpu_segment(int cpu)*/ void __init setup_per_cpu_areas (void ) { -ssize_t size = __per_cpu_end - __per_cpu_start; -unsigned int nr_cpu_pages =DIV_ROUND_UP (size,PAGE_SIZE ); -static struct page **pages; -size_t pages_size; -unsigned int cpu, i, j; +size_t static_size = __per_cpu_end - __per_cpu_start; +unsigned int cpu;unsigned long delta;size_t pcpu_unit_size; +ssize_t ret;pr_info ("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n" ,NR_CPUS , nr_cpumask_bits, nr_cpu_ids, nr_node_ids); -pr_info ("PERCPU: Allocating %zd bytes for static per cpu data\n" , size); - - pages_size = nr_cpu_pages *num_possible_cpus () *sizeof (pages[0 ]); - pages =alloc_bootmem (pages_size); - - j =0 ; -for_each_possible_cpu (cpu) { -void *ptr; - -for (i =0 ; i < nr_cpu_pages; i++) { -#ifndef CONFIG_NEED_MULTIPLE_NODES - ptr =alloc_bootmem_pages (PAGE_SIZE ); -#else -int node =early_cpu_to_node (cpu); - -if (!node_online (node) || !NODE_DATA (node)) { - ptr =alloc_bootmem_pages (PAGE_SIZE ); -pr_info ("cpu %d has no node %d or node-local " -"memory\n" , cpu, node); -pr_debug ("per cpu data for cpu%d at %016lx\n" , - cpu,__pa (ptr)); - }else { - ptr =alloc_bootmem_pages_node (NODE_DATA (node), -PAGE_SIZE ); -pr_debug ("per cpu data for cpu%d on node%d " -"at %016lx\n" , cpu, node,__pa (ptr)); - } -#endif -memcpy (ptr, __per_cpu_load + i *PAGE_SIZE ,PAGE_SIZE ); - pages[j++] =virt_to_page (ptr); - } - } - pcpu4k_pages = pages; - pcpu4k_nr_static_pages = nr_cpu_pages; - pcpu_unit_size =pcpu_setup_first_chunk (pcpu4k_get_page, size,0 ,0 , -NULL , pcpu4k_populate_pte); +/* allocate percpu area */ + ret =setup_pcpu_4k (static_size); +if (ret <0 ) +panic ("cannot allocate static percpu area (%zu bytes, err=%zd)" , + static_size, ret); -free_bootmem (__pa (pages), pages_size); + pcpu_unit_size = ret; +/* alrighty, percpu areas up and running */ delta = (unsigned long )pcpu_base_addr - (unsigned long )__per_cpu_start;for_each_possible_cpu (cpu) {per_cpu_offset (cpu) = delta + cpu * pcpu_unit_size;
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 9/10 x86: add embedding percpu first chunk allocator
In reply to Tejun HeoImpact: add better first percpu allocation for !NUMA
On !NUMA, we can simply allocate contiguous memory and use it for the first chunk without mapping it into vmalloc area. As the memory area is covered by the large page physical memory mapping, it allows the dynamic perpcu allocator to not add any TLB overhead for the static percpu area and whatever falls into the first chunk and the implementation is very simple too.
--- arch/x86/kernel/setup_percpu.c | 86 +++++++++++++++++++++++++++++++++++++++- 1 files changed, 85 insertions(+), 1 deletions(-)
arch/x86/kernel/setup_percpu.c +85 -1
@@ -43,6 +43,35 @@ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {EXPORT_SYMBOL (__per_cpu_offset);/** +* pcpu_need_numa - determine percpu allocation needs to consider NUMA +* +* If NUMA is not configured or there is only one NUMA node available, +* there is no reason to consider NUMA. This function determines +* whether percpu allocation should consider NUMA or not. +* +* RETURNS: +* true if NUMA should be considered; otherwise, false. +*/ +static bool __init pcpu_need_numa (void ) +{ +#ifdef CONFIG_NEED_MULTIPLE_NODES +pg_data_t *last =NULL ; +unsigned int cpu; + +for_each_possible_cpu (cpu) { +int node =early_cpu_to_node (cpu); + +if (node_online (node) &&NODE_DATA (node) && + last && last !=NODE_DATA (node)) +return true; + + last =NODE_DATA (node); + } +#endif +return false; +} + +/** * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu * @cpu: cpu to allocate for * @size: size allocation in bytes
@@ -82,6 +111,59 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, }/* +* Embedding allocator +* +* The first chunk is sized to just contain the static area plus +* PERCPU_DYNAMIC_RESERVE and allocated as a contiguous area using +* bootmem allocator and used as-is without being mapped into vmalloc +* area. This enables the first chunk to piggy back on the linear +* physical PMD mapping and doesn't add any additional pressure to +* TLB. +*/ +static void *pcpue_ptr__initdata ; +static size_t pcpue_unit_size__initdata ; + +static struct page *__init pcpue_get_page (unsigned int cpu,int pageno) +{ +return virt_to_page (pcpue_ptr + cpu * pcpue_unit_size + + ((size_t )pageno <<PAGE_SHIFT )); +} + +static ssize_t __init setup_pcpu_embed (size_t static_size) +{ +unsigned int cpu; + +/* +* If large page isn't supported, there's no benefit in doing +* this. Also, embedding allocation doesn't play well with +* NUMA. +*/ +if (!cpu_has_pse ||pcpu_need_numa ()) +return -EINVAL ; + +/* allocate and copy */ + pcpue_unit_size =PFN_ALIGN (static_size +PERCPU_DYNAMIC_RESERVE ); + pcpue_unit_size =max (pcpue_unit_size,PCPU_MIN_UNIT_SIZE ); + pcpue_ptr =pcpu_alloc_bootmem (0 ,num_possible_cpus () * pcpue_unit_size, +PAGE_SIZE ); +if (!pcpue_ptr) +return -ENOMEM ; + +for_each_possible_cpu (cpu) +memcpy (pcpue_ptr + cpu * pcpue_unit_size, __per_cpu_load, + static_size); + +/* we're ready, commit */ +pr_info ("PERCPU: Embedded %zu pages at %p, static data %zu bytes\n" , + pcpue_unit_size >>PAGE_SHIFT , pcpue_ptr, static_size); + +return pcpu_setup_first_chunk (pcpue_get_page, static_size, + pcpue_unit_size, + pcpue_unit_size - static_size, pcpue_ptr, +NULL ); +} + +/* * 4k page allocator * * This is the basic allocator. Static percpu area is allocated
@@ -178,7 +260,9 @@ void __init setup_per_cpu_areas(void) NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);/* allocate percpu area */ - ret =setup_pcpu_4k (static_size); + ret =setup_pcpu_embed (static_size); +if (ret <0 ) + ret =setup_pcpu_4k (static_size);if (ret <0 )panic ("cannot allocate static percpu area (%zu bytes, err=%zd)" , static_size, ret);
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 10/10 x86: add remapping percpu first chunk allocator
In reply to Tejun HeoImpact: add better first percpu allocation for NUMA
On NUMA, embedding allocator can't be used as different units can't be made to fall in the correct NUMA nodes. To use large page mapping, each unit needs to be remapped. However, percpu areas are usually much smaller than large page size and unused space hurts a lot as the number of cpus grow. This allocator remaps large pages for each chunk but gives back unused part to the bootmem allocator making the large pages mapped twice.
This adds slightly to the TLB pressure but is much better than using 4k mappings while still being NUMA-friendly.
Ingo suggested that this would be the correct approach for NUMA.
--- arch/x86/kernel/setup_percpu.c | 137 +++++++++++++++++++++++++++++++++++++++- 1 files changed, 135 insertions(+), 2 deletions(-)
arch/x86/kernel/setup_percpu.c +135 -2
@@ -111,6 +111,133 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, }/* +* Remap allocator +* +* This allocator uses PMD page as unit. A PMD page is allocated for +* each cpu and each is remapped into vmalloc area using PMD mapping. +* As PMD page is quite large, only part of it is used for the first +* chunk. Unused part is returned to the bootmem allocator. +* +* So, the PMD pages are mapped twice - once to the physical mapping +* and to the vmalloc area for the first percpu chunk. The double +* mapping does add one more PMD TLB entry pressure but still is much +* better than only using 4k mappings while still being NUMA friendly. +*/ +#ifdef CONFIG_NEED_MULTIPLE_NODES +static size_t pcpur_size__initdata ; +static void **pcpur_ptrs__initdata ; + +static struct page *__init pcpur_get_page (unsigned int cpu,int pageno) +{ +size_t off = (size_t )pageno <<PAGE_SHIFT ; + +if (off >= pcpur_size) +return NULL ; + +return virt_to_page (pcpur_ptrs[cpu] + off); +} + +static ssize_t __init setup_pcpu_remap (size_t static_size) +{ +static struct vm_struct vm; +pg_data_t *last; +size_t ptrs_size; +unsigned int cpu; +ssize_t ret; + +/* +* If large page isn't supported, there's no benefit in doing +* this. Also, on non-NUMA, embedding is better. +*/ +if (!cpu_has_pse ||pcpu_need_numa ()) +return -EINVAL ; + + last =NULL ; +for_each_possible_cpu (cpu) { +int node =early_cpu_to_node (cpu); + +if (node_online (node) &&NODE_DATA (node) && + last && last !=NODE_DATA (node)) + goto proceed; + + last =NODE_DATA (node); + } +return -EINVAL ; + +proceed: +/* +* Currently supports only single page. Supporting multiple +* pages won't be too difficult if it ever becomes necessary. +*/ + pcpur_size =PFN_ALIGN (static_size +PERCPU_DYNAMIC_RESERVE ); +if (pcpur_size >PMD_SIZE ) { +pr_warning ("PERCPU: static data is larger than large page, " +"can't use large page\n" ); +return -EINVAL ; + } + +/* allocate pointer array and alloc large pages */ + ptrs_size =PFN_ALIGN (num_possible_cpus () *sizeof (pcpur_ptrs[0 ])); + pcpur_ptrs =alloc_bootmem (ptrs_size); + +for_each_possible_cpu (cpu) { + pcpur_ptrs[cpu] =pcpu_alloc_bootmem (cpu,PMD_SIZE ,PMD_SIZE ); +if (!pcpur_ptrs[cpu]) + goto enomem; + +/* +* Only use pcpur_size bytes and give back the rest. +* +* Ingo: The 2MB up-rounding bootmem is needed to make +* sure the partial 2MB page is still fully RAM - it's +* not well-specified to have a PAT-incompatible area +* (unmapped RAM, device memory, etc.) in that hole. +*/ +free_bootmem (__pa (pcpur_ptrs[cpu] + pcpur_size), +PMD_SIZE - pcpur_size); + +memcpy (pcpur_ptrs[cpu], __per_cpu_load, static_size); + } + +/* allocate address and map */ + vm.flags =VM_ALLOC ; + vm.size =num_possible_cpus () *PMD_SIZE ; +vm_area_register_early (&vm,PMD_SIZE ); + +for_each_possible_cpu (cpu) { +pmd_t *pmd; + + pmd =populate_extra_pmd ((unsigned long )vm.addr + + cpu *PMD_SIZE ); +set_pmd (pmd,pfn_pmd (page_to_pfn (virt_to_page (pcpur_ptrs[cpu])), +PAGE_KERNEL_LARGE )); + } + +/* we're ready, commit */ +pr_info ("PERCPU: Remapped at %p with large pages, static data " +"%zu bytes\n" , vm.addr, static_size); + + ret =pcpu_setup_first_chunk (pcpur_get_page, static_size,PMD_SIZE , + pcpur_size - static_size, vm.addr,NULL ); + goto out_free_ar; + +enomem: +for_each_possible_cpu (cpu) +if (pcpur_ptrs[cpu]) +free_bootmem (__pa (pcpur_ptrs[cpu]),PMD_SIZE ); + ret = -ENOMEM ; +out_free_ar: +free_bootmem (__pa (pcpur_ptrs), ptrs_size); +return ret; +} +#else +static ssize_t __init setup_pcpu_remap (size_t static_size) +{ +return -EINVAL ; +} +#endif + +/* * Embedding allocator * * The first chunk is sized to just contain the static area plus
@@ -259,8 +386,14 @@ void __init setup_per_cpu_areas(void)pr_info ("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n" ,NR_CPUS , nr_cpumask_bits, nr_cpu_ids, nr_node_ids); -/* allocate percpu area */ - ret =setup_pcpu_embed (static_size); +/* +* Allocate percpu area. If PSE is supported, try to make use +* of large page mappings. Please read comments on top of +* each allocator for details. +*/ + ret =setup_pcpu_remap (static_size); +if (ret <0 ) + ret =setup_pcpu_embed (static_size);if (ret <0 ) ret =setup_pcpu_4k (static_size);if (ret <0 )
Signature · 1 line
1.6.0.2
Quoted 10 lines · Tejun Heo
Hello, all.
This patchset improves the first percpu chunk allocation. The problem is that the dynamic percpu area allocation maps the whole percpu area into vmalloc area using 4k mappings which adds considerable amount of TLB pressure.
This patchset modularizes the first percpu chunk allocation and uses different allocation schemes to optimize TLB usage.
Quoted 8 lines
* On !NUMA, the first chunk is allocated directly using
alloc_bootmem()thus adding no TLB pressure whatsoever.* On NUMA, the first chunk is remapped using large pages and whatever is left in the large page is given back to the bootmem allocator. This makes each cpu use an additional large TLB entry for the first chunk but still is much better than using many 4k TLB entries.
Hm, i think there still must be some basic misunderstanding somewhere here. Let me describe the design i described in the previous mail in more detail.
In one of your changelogs you state:
| On NUMA, embedding allocator can't be used as different | units can't be made to fall in the correct NUMA nodes.
This is a direct consequence of the unit/chunk abstraction, and i think that abstraction is wrong.
What i'm suggesting is to have a simple continuous [non-chunked, with a hole in the last bits of the first 2MB] virtual memory range for each CPU.
This special virtual memory starts with a 2MB page (for the static bits - perhaps also with a default starter dynamic area appended to that - we can size this reasonably) and continues with 4K mappings at the next 2MB boundary and goes on linearly from that point on.
The variables within this singular 'percpu area' mirror each other amongst CPUs. So if a dynamic (or static) percpu variable is at offset 156100 in CPU#5's range - then it will be at offset 156100 in CPU#11's percpu area too. Each of these areas are tightly packed with that CPU's allocations (and only that CPU's allocations), there's no chunking, no units.
As with your proposal this tears down the current artificial distinction between static and dynamic percpu variables.
But with this approach we'd the following additional advantages:
- No dynamic-alloc single-allocation size limits _at all_ in practice. [up to the total size of the virtual memory window]
( With your current proposal the dynamic alloc is limited to
unit size - which is looks a bit inflexible as unit size impacts other characteristics so when we want to increase the dynamic allocation size we'd also affect other areas of the code. )
percpu_alloc() would become as limitless (on 64-bit) as vmalloc().
- no NUMA complications and no NUMA assymetry at all. When we extend a CPU's percpu area we do NUMA-local allocations to that CPU. The memory allocated is purely for that CPU's purpose.
- We'd have a very 'compressed' pte presence in the pagetables:
the dynamic percpu area is as tightly packed as possible. With a chunked design we 'scatter' the ptes a bit more broadly.
The only thing that gets a bit trickier is sizing - but not by much. The best way we can size this without practical complications on very small or very large systems would by setting the maximum _combined_ size for all percpu allocations.
Say we set this 'PERCPU_TOTAL' limit to 4 GB. That means that if there are 8 possible CPUs, each CPU can have up to 512 MB of RAM. That's plenty in practice.
We can do this splitup dynamically during bootup, because the area is still fully linear, relative to the percpu offset.
[ A system with 4k CPUs would want to have a larger PERCPU_TOTAL
- but obviously it cannot be really mind-blowingly large because the total max has to be backed up with real RAM. So realistically we wont have more than 1TB in the next 10 years or so. Which is still well below the limitations of the 64-bit address space. ]
In a non-chunked allocator the whole bitmap management becomes much simpler and more straightforward as well. It's also much easier to think about than an interleaved unit+chunk design.
The only special complication is the setup of the initial 2MB area - but that is tricky to bootstrap anyway because we need to set it up before the page allocator gets initialized. It's also worthwile to put the most common percpu variables, and an expected amount of dynamic area into a 2MB TLB.
Hm?
Ingo
Tejun Heo
maintainerHello, Ingo.
Quoted 10 lines · Ingo Molnar
Hm, i think there still must be some basic misunderstanding somewhere here. Let me describe the design i described in the previous mail in more detail.
In one of your changelogs you state:
| On NUMA, embedding allocator can't be used as different | units can't be made to fall in the correct NUMA nodes.This is a direct consequence of the unit/chunk abstraction,
Not at all. That's an optimization for !NUMA. The remap allocator is what can be done on NUMA. Chunking or not doesn't make any difference in this regard. The only difference between chunking and not chunking is whether separately allocated percpu offsets have more or less holes inbetween them, which is irrelevant for all purposes.
Quoted 1 line
and i think that abstraction is wrong.
No, it's not wrong. It simply is irrelevant - it's congruent vs. contiguos and all that we need is congruent. Contiguous of course achieves congruent but it doesn't make any difference for this purpose.
Please take a look at the remap allocator. That's what you had in mind for the contiguos mapping. The embedding allocator is an improvement specifically for !NUMA so that it doesn't even have to spend the single extra TLB entry for the first 2MB page, which BTW would be impossible with contiguous mapping.
Quoted 10 lines
What i'm suggesting is to have a simple continuous [non-chunked, with a hole in the last bits of the first 2MB] virtual memory range for each CPU.
This special virtual memory starts with a 2MB page (for the static bits - perhaps also with a default starter dynamic area appended to that - we can size this reasonably) and continues with 4K mappings at the next 2MB boundary and goes on linearly from that point on.
Quoted 6 lines
The variables within this singular 'percpu area' mirror each other amongst CPUs. So if a dynamic (or static) percpu variable is at offset 156100 in CPU#5's range - then it will be at offset 156100 in CPU#11's percpu area too. Each of these areas are tightly packed with that CPU's allocations (and only that CPU's allocations), there's no chunking, no units.
Yes, I did understand that and did reply that in my previous email.
=== QUOTE ===
The new percpu_alloc() already does that. Chunking or not makes no difference on this regard. The only difference whether there are more holes in the allocated percpu addresses or not, which basically is irrelevant and chunking makes things much more flexible and scalable. ie. It can scale toward many many cpus or large large percpu areas wheras making the areas contiguous make the scalability determined by the product of the two.
Also, contiguous per-cpu areas might look simpler but it actually is more complicated because it becomes much more arch dependent. With chunking, the complexity is in generic code as virtual address and stuff are already in place. If the cpu areas need to be made contiguous, the generic code will get simpler but each arch needs to come up with new address space layout.
There simply isn't any measurable advantage to making the area contiguous.
=== END OF QUOTE ===
Quoted 8 lines
As with your proposal this tears down the current artificial distinction between static and dynamic percpu variables.
But with this approach we'd the following additional advantages:
- No dynamic-alloc single-allocation size limits
_atall_in practice. [up to the total size of the virtual memory window]
Quoted 8 lines
( With your current proposal the dynamic alloc is limited to
unit size - which is looks a bit inflexible as unit size impacts other characteristics so when we want to increase the dynamic allocation size we'd also affect other areas of the code. )
percpu_alloc()would become as limitless (on 64-bit) asvmalloc().
There is no artificial limit on unit_size. Contiguous is special form of congruent and thus it simply can't be more flexible than congruent. If the maximum allocation size is somthing to worry about just bumping the MIN constant should do the trick at the cost of consuming more virtual address, but seriously I don't think the maximum allocation size is something we need to worry about. 64k is way more than enough.
Quoted 4 lines
- no NUMA complications and no NUMA assymetry at all. When we extend a CPU's percpu area we do NUMA-local allocations to that CPU. The memory allocated is purely for that CPU's purpose.
Chunking or not doesn't make any difference in this regard. The posted allocator does exactly what you described above.
Quoted 3 lines
- We'd have a very 'compressed' pte presence in the pagetables:
the dynamic percpu area is as tightly packed as possible. With a chunked design we 'scatter' the ptes a bit more broadly.
Can you please elaborate a bit?
If you're worried about packing, with the current usage pattern, it doesn't matter at all. There are lots of small allocations and larger ones often need small alignment. They pack alright.
Quoted 11 lines
The only thing that gets a bit trickier is sizing - but not by much. The best way we can size this without practical complications on very small or very large systems would by setting the maximum _combined_ size for all percpu allocations.
Say we set this '
PERCPU_TOTAL' limit to 4 GB. That means that if there are 8 possible CPUs, each CPU can have up to 512 MB of RAM. That's plenty in practice.We can do this splitup dynamically during bootup, because the area is still fully linear, relative to the percpu offset.
I think it's a pretty big problem on 32bit and also it makes implementing dynamic allocator much more involved for each arch wheras chunking puts the complexity at the generic code and just uses the existing vmalloc address mapping. I really can't see advantage of contiguous allocation.
Quoted 6 lines
[ A system with 4k CPUs would want to have a larger
PERCPU_TOTAL
- but obviously it cannot be really mind-blowingly large because the total max has to be backed up with real RAM. So realistically we wont have more than 1TB in the next 10 years or so. Which is still well below the limitations of the 64-bit address space. ]
With chunking, we simply don't have to think about any of this.
Quoted 3 lines
In a non-chunked allocator the whole bitmap management becomes much simpler and more straightforward as well. It's also much easier to think about than an interleaved unit+chunk design.
I don't know. The bitmap allocator itself would be the same. It's just that with chunking we have multiple of them and complexities are added when choosing where to allocate and reverse mapping pointer to its chunk. I think it's reasonably straight forward as it is.
Plus, it's not like we'll be able to do things as simple as module_percpu allocator does anyway. If we map/unmap pages using highest allocated mark, single allocation can hold up vast amount of memory. If we start depopulating in the middle, we no longer can use simple bitmap allocator and try to group allocations so that we don't waste a lot of pages. Reclamation is one of the reasons why I chose chunking.
Quoted 5 lines
The only special complication is the setup of the initial 2MB area - but that is tricky to bootstrap anyway because we need to set it up before the page allocator gets initialized. It's also worthwile to put the most common percpu variables, and an expected amount of dynamic area into a 2MB TLB.
Yeah, it's bootstrapping. No matter what we do, it's gonna be a little bit hairy.
Thanks.
Signature · 1 line
tejun
Quoted 12 lines · Tejun Heo
Hello, Ingo.
Quoted 9 lines · Ingo Molnar
Hm, i think there still must be some basic misunderstanding somewhere here. Let me describe the design i described in the previous mail in more detail.
In one of your changelogs you state:
| On NUMA, embedding allocator can't be used as different | units can't be made to fall in the correct NUMA nodes.
Quoted 8 lines
Quoted 1 line
This is a direct consequence of the unit/chunk abstraction,
Not at all. That's an optimization for !NUMA. The remap allocator is what can be done on NUMA. Chunking or not doesn't make any difference in this regard. The only difference between chunking and not chunking is whether separately allocated percpu offsets have more or less holes inbetween them, which is irrelevant for all purposes.
It's not an optimization, it's a pessimisation :)
Please read what i wrote to you. We want the percpu static and dynamic areas to be _one and the same thing_. (With just the different that static allocations have a handy compile-time offset shortcut - but the access is still the same.)
Right now, with your latest code we still have this:
* Use this to get to a cpu's version of the per-cpu object
* dynamically allocated. Non-atomic access to the current CPU's
* version should probably be combined with get_cpu()/put_cpu(). */
#define per_cpu_ptr(ptr, cpu) SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu)))
This slows down per_cpu_ptr() and makes the dynamic percpu case a second-class citizen because most actual usages are for the current CPU, still have to go via the per_cpu_offset() indirection.
I.e. we have things like:
const int cpu = get_cpu();
u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu);Instead of a straight:
u8 *scratch = *this_cpu_ptr(ipcomp_scratches);
We cannot do that optimization due to the NUMA and SMP assymetry. If NUMA and SMP had the same linear structure, as i suggested we do, we could do it.
Currently you rely on per_cpu_offset() indirection basically as a soft-TLB entry covering all dynamic allocations. That sucks.
Ok?
Ingo
Tejun Heo
maintainerHello, Ingo.
Quoted 1 line · Ingo Molnar
It's not an optimization, it's a pessimisation :)
Hmmm... big word. Looking up pessimisation... Ah, okay, it's from pessimistic.
Quoted 13 lines
Please read what i wrote to you. We want the percpu static and dynamic areas to be
_oneand the samething_. (With just the different that static allocations have a handy compile-time offset shortcut - but the access is still the same.)Right now, with your latest code we still have this:
* Use this to get to a cpu's version of the per-cpu object
* dynamically allocated. Non-atomic access to the current CPU's
* version should probably be combined with get_cpu()/put_cpu(). */
#defineper_cpu_ptr(ptr, cpu)SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu)))
Quoted 4 lines
This slows down
per_cpu_ptr()and makes the dynamic percpu case a second-class citizen because most actual usages are for the current CPU, still have to go via theper_cpu_offset()indirection.
Heh... I suppose this is why you and I are keeping disagreeing. Currently, __my_cpu_offset is defined as percpu_read(this_cpu_off) and __get_cpu_var() is defined as (*SHIFT_PERCPU_PTR(&per_cpu_var(var), __my_cpu_offset), so our static access is now basically *per_cpu_ptr().
If per_cpu_ptr() is second class citizen, get_cpu_var() is too. :-) So, there's nothing more indirect about per_cpu_ptr() compared to get_cpu_var() anymore.
Quoted 3 lines
We cannot do that optimization due to the NUMA and SMP assymetry. If NUMA and SMP had the same linear structure, as i suggested we do, we could do it.
No no no, there's no difference whatsoever. Either I'm glossly misunderstanding something or you're because I really cannot see any difference between static and dynamic ones except for whether the offset itself is static or not.
What's missing is unification of static and dynamic accessors and thus the faster accessors - percpu_read() and friends - for dynamic ones. This will be the next round of patches.
Quoted 4 lines
Currently you rely on
per_cpu_offset()indirection basically as a soft-TLB entry covering all dynamic allocations. That sucks.Ok?
IIUC, the per_cpu_offset() indirection stems from %gs addressing restriction. We can't teach gcc about it and so the percpu_read() and friends. Come on, our static percpu variable uses per_cpu_offset() too.
If my reality seems to be disassociated from other's more than it usually is, please feel free to enlighten me. :-)
Thanks.
Signature · 1 line
tejun
Quoted 3 lines · Tejun Heo
What's missing is unification of static and dynamic accessors and thus the faster accessors -
percpu_read()and friends - for dynamic ones. This will be the next round of patches.
Ok, good - we are in agreement then and i'll wait for those patches.
And i think i finally decoded the real source of the disconnect :-)
It's still about this restriction:
+ /*
+ * If large page isn't supported, there's no benefit in doing + * this. Also, embedding allocation doesn't play well with + * NUMA. + */
+ if (!cpu_has_pse || pcpu_need_numa())
+ return -EINVAL;
This is what makes no sense (why force the static percpu area into 4K mappings on NUMA).
You do it because i think you misunderstood my original 2MB TLB static area suggestion. setup_pcpu_embed() does this now:
+ pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size,
+ PAGE_SIZE);
That is not NUMA-friendly indeed.
What should be done instead is to up the unit size to 2MB as i suggested, and to allocate 2MB sized and 2MB aligned numa-correct area for each CPU, via bootmem.
To quote my original mail:
Quoted 4 lines
Quoted 4 lines
- allocate the static percpu area using bootmem-alloc, but using a 2MB alignment parameter and a 2MB aligned size. Then we can remap it to some convenient and undisturbed virtual memory area, using 2MB TLBs. [*]
I.e. each individual 2MB allocated largepage can then be remapped as a 2MB TLB to the high (vmalloc) area. Followed by ordinary 4K mappings for regular percpu_alloc() pages.
( and the partial, unused pages within this initial chunk are
returned to bootmem. )
That will be NUMA-friendly and i suspect we should also use it on SMP just to get that aspect of the code tested better.
Do _not_ allocate the units together in one bootmem allocation because that's not NUMA-friendly.
Ok?
Ingo
Tejun Heo
maintainerHello, Ingo.
Quoted 8 lines · Ingo Molnar
Quoted 3 lines · Tejun Heo
What's missing is unification of static and dynamic accessors and thus the faster accessors -
percpu_read()and friends - for dynamic ones. This will be the next round of patches.Ok, good - we are in agreement then and i'll wait for those patches.
Whooray!
Quoted 13 lines
And i think i finally decoded the real source of the disconnect :-)
It's still about this restriction:
(quoted diff) +7
-0+ /* + * If large page isn't supported, there's no benefit in doing + * this. Also, embedding allocation doesn't play well with + * NUMA. + */ + if (!cpu_has_pse || pcpu_need_numa()) + return -EINVAL;
Quoted 2 lines
This is what makes no sense (why force the static percpu area into 4K mappings on NUMA).
No, the first allocator tried is remap allocator which will do the 2MB remapping thing if NUMA. If not, it gives its way to embedding allocator which only kicks in for pse && !numa. The 4k thing is just the last resort. We might as well kill it and make it
if (numa)
do remap
else
do embed
panic if failed
The 4k thing is the final fallback for cases where pse isn't supported.
Quoted 7 lines
You do it because i think you misunderstood my original 2MB TLB static area suggestion.
setup_pcpu_embed()does this now:(quoted diff) +2
-0+ pcpue_ptr = pcpu_alloc_bootmem(0, num_possible_cpus() * pcpue_unit_size, + PAGE_SIZE);That is not NUMA-friendly indeed.
NUMA uses 2MB remapping. Non-NUMA uses embedding. If you're annoyed about the embedding allocator, we can drop it but given that most of the machines in the wild are non-NUMA and the code to do the trick is quite simple, I think it justifies its existence.
Quoted 3 lines
What should be done instead is to up the unit size to 2MB as i suggested, and to allocate 2MB sized and 2MB aligned numa-correct area for each CPU, via bootmem.
YES, the posted code does EXACTLY that for NUMA!!!!
Quoted 7 lines
To quote my original mail:
Quoted 4 lines
Quoted 4 lines
- allocate the static percpu area using bootmem-alloc, but using a 2MB alignment parameter and a 2MB aligned size. Then we can remap it to some convenient and undisturbed virtual memory area, using 2MB TLBs. [*]
Quoted 6 lines
I.e. each individual 2MB allocated largepage can then be remapped as a 2MB TLB to the high (vmalloc) area. Followed by ordinary 4K mappings for regular
percpu_alloc()pages.( and the partial, unused pages within this initial chunk are
returned to bootmem. )
I did understand that the first time around.
Quoted 2 lines
That will be NUMA-friendly and i suspect we should also use it on SMP just to get that aspect of the code tested better.
For testing coverage, we can make a debug parameter or something but think about it. The embedding allocator is ~100 lines of well commented code which is dropped once init is complete and it always saves a 2MB TLB entry for all the non-NUMA machines out there. It is a very low cost optimization for >90% of machines out there.
Quoted 2 lines
Do _not_ allocate the units together in one bootmem allocation because that's not NUMA-friendly.
Again, it doesn't do that for NUMA.
Signature · 1 line
tejun
Quoted 19 lines · Tejun Heo
Quoted 10 lines
It's still about this restriction:
(quoted diff) +7
-0+ /* + * If large page isn't supported, there's no benefit in doing + * this. Also, embedding allocation doesn't play well with + * NUMA. + */ + if (!cpu_has_pse || pcpu_need_numa()) + return -EINVAL;Quoted 2 lines
This is what makes no sense (why force the static percpu area into 4K mappings on NUMA).
No, the first allocator tried is remap allocator which will do the 2MB remapping thing if NUMA. If not, it gives its way to embedding allocator which only kicks in for pse && !numa. The 4k thing is just the last resort. We might as well kill it and make it
Quoted 8 lines
if (numa)
do remap
else
do embed
panic if failedThe 4k thing is the final fallback for cases where pse isn't supported.
ah, ok :-) Then i was confused by that and wanted to see something implemented that ... was already there :)
Ingo
Tejun Heo
maintainerQuoted 2 lines · Ingo Molnar
ah, ok :-) Then i was confused by that and wanted to see something implemented that ... was already there :)
:-)
Signature · 1 line
tejun
Quoted 2 lines · On Wednesday 25 February 2009 01:07:24 Tejun Heo wrote:
it always
saves a 2MB TLB entry for all the non-NUMA machines out there.
Note that everyone keeps talking about "a" TLB entry; I wanted to make sure (esp. for those of us reading from the sidelines), it's not: it's up to num_possible_cpus() TLB entries. Of course, many paths won't access other CPU's data, but it'd be interesting (and pretty easy) to actually instrument how rare this is...
Hmm, fairly rare, but not incredibly:
percpu: measure use
With the idea of using virtual mappings for percpu regions, we wonder how often we access other CPU's per-cpu variables.
32-bit 4-way SMP (under kvm), kernel make -j4:get_cpu_var() 52,358,618raw_get_cpu_var() 287,191
per_cpu(): 17,371,648 per_cpu(same): 16,020,390
Total same-cpu calls: 68,666,199
Cross-per-cpu calls: 1,351,258
--- arch/x86/Makefile_32.cpu | 2 +- include/asm-generic/percpu.h | 10 +++++++--- kernel/module.c | 11 +++++++++++ kernel/smp.c | 21 +++++++++++++++++++++ 4 files changed, 40 insertions(+), 4 deletions(-)
arch/x86/Makefile_32.cpu +1 -1
@@ -47,5 +47,5 @@ cflags-$(CONFIG_X86_GENERIC) += $(call # Bug fix for binutils: this option is required in order to keep # binutils from generating NOPL instructions against our will. ifneq ($(CONFIG_X86_P6_NOP),y) -cflags-y += $(call cc-option,-Wa$(comma)-mtune=generic32,) +#cflags-y += $(call cc-option,-Wa$(comma)-mtune=generic32,) endif
include/asm-generic/percpu.h +7 -3
@@ -53,12 +53,16 @@ extern unsigned long __per_cpu_offset[NR* established ways to produce a usable pointer from the percpu variable * offset. */ +void count_per_cpu (unsigned int cpu); +void count_get_cpu_var (void ); +void count_raw_get_cpu_var (void ); +#define per_cpu (var, cpu) \ - (*SHIFT_PERCPU_PTR(&per_cpu_var(var), per_cpu_offset(cpu))) + (*(count_per_cpu(cpu), SHIFT_PERCPU_PTR(&per_cpu_var(var), per_cpu_offset(cpu))))#define __get_cpu_var (var) \ - (*SHIFT_PERCPU_PTR(&per_cpu_var(var), my_cpu_offset)) + (*(count_get_cpu_var(), SHIFT_PERCPU_PTR(&per_cpu_var(var), my_cpu_offset)))#define __raw_get_cpu_var (var) \ - (*SHIFT_PERCPU_PTR(&per_cpu_var(var), __my_cpu_offset)) + (*(count_raw_get_cpu_var(), SHIFT_PERCPU_PTR(&per_cpu_var(var), __my_cpu_offset)))#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA
kernel/module.c +11 -0
@@ -2705,6 +2705,17 @@ static const struct seq_operations modulstatic int modules_open (struct inode *inode,struct file *file) { +extern atomic_t get_cpu_var_count, raw_get_cpu_var_count, per_cpu_count[], unnecessary_count[]; +unsigned int i; + +printk ("get_cpu_var_count: %i\n" ,atomic_xchg (&get_cpu_var_count,0 )); +printk ("raw_get_cpu_var_count: %i\n" , +atomic_xchg (&raw_get_cpu_var_count,0 )); +for_each_online_cpu (i) +printk ("per_cpu %i: %u (%u self)\n" , + i,atomic_xchg (&per_cpu_count[i],0 ), +atomic_xchg (&unnecessary_count[i],0 )); +return seq_open (file, &modules_op); }
kernel/smp.c +21 -0
@@ -10,6 +10,27 @@#include <linux/rcupdate.h> #include <linux/rculist.h> #include <linux/smp.h> + +atomic_t get_cpu_var_count, raw_get_cpu_var_count, per_cpu_count[CONFIG_NR_CPUS ], unnecessary_count[CONFIG_NR_CPUS ]; +void count_per_cpu (unsigned int cpu) +{ +if (cpu ==raw_smp_processor_id ()) +atomic_inc (&unnecessary_count[cpu]); +atomic_inc (&per_cpu_count[cpu]); +} +EXPORT_SYMBOL (count_per_cpu); + +void count_get_cpu_var (void ) +{ +atomic_inc (&get_cpu_var_count); +} +EXPORT_SYMBOL (count_get_cpu_var); + +void count_raw_get_cpu_var (void ) +{ +atomic_inc (&raw_get_cpu_var_count); +} +EXPORT_SYMBOL (count_raw_get_cpu_var); static DEFINE_PER_CPU(struct call_single_queue, call_single_queue);static LIST_HEAD (call_function_queue);
H. Peter Anvin
reviewerQuoted 10 lines · Rusty Russell
Quoted 2 lines · On Wednesday 25 February 2009 01:07:24 Tejun Heo wrote:
it always
saves a 2MB TLB entry for all the non-NUMA machines out there.Note that everyone keeps talking about "a" TLB entry; I wanted to make sure (esp. for those of us reading from the sidelines), it's not: it's up to
num_possible_cpus()TLB entries. Of course, many paths won't access other CPU's data, but it'd be interesting (and pretty easy) to actually instrument how rare this is...
Actually it's up to the number of actual CPUs in the system... obviously there isn't any data allocated for non-present CPUs.
-hpa
Quoted 12 lines · H. Peter Anvin
Quoted 10 lines · Rusty Russell
Quoted 2 lines · On Wednesday 25 February 2009 01:07:24 Tejun Heo wrote:
it always
saves a 2MB TLB entry for all the non-NUMA machines out there.Note that everyone keeps talking about "a" TLB entry; I wanted to make sure (esp. for those of us reading from the sidelines), it's not: it's up to
num_possible_cpus()TLB entries. Of course, many paths won't access other CPU's data, but it'd be interesting (and pretty easy) to actually instrument how rare this is...
Quoted 2 lines
Actually it's up to the number of actual CPUs in the system... obviously there isn't any data allocated for non-present CPUs.
well, we allocate percpu data for each possible CPU.
In the overwhelming majority of cases that means all actual CPUs.
Ingo
Quoted 5 lines · Tejun Heo
Quoted 3 lines
- We'd have a very 'compressed' pte presence in the pagetables:
the dynamic percpu area is as tightly packed as possible. With a chunked design we 'scatter' the ptes a bit more broadly.Can you please elaborate a bit?
Sure. We want to compress data usage on every level of caching.
Part of that is to compress the ptes themselves, as they are laid out in the pagetables. With your current small-chunks setup we get this address space layout:
u1 .... [hole] ... u2 .. [hole] .... u3 ... [hole]
Where the 'hole' is the units belonging to other CPUs - but this CPU is largely uninterested in it. These 'holes' are the larger the more CPUs there are in the system.
A 'hole' there means that we have a number of ptes that are unused in that CPU. That is bad in several ways:
- those ptes will still be cached in the CPU - just not used for anything by that CPU. So the cache utilization ratio for those ptes will be very low.
- a modern x86 CPU's TLB walker will prefetch into nearby present ptes quite agressively, based on access patterns it detects. Having a lot of 'other CPU' ptes present will fool this CPU into prefetching them, if there's nearby usage. Those TLB entries are lost and they can create pressure on and eliminate useful TLB entries as well.
- as the number of CPUs increases in the system, the worse this situation gets. So up until a certain limit (when the hole becomes so large that the CPU does not speculate to any additional level into it) this effects gets worse gradually.
So what i'm saying is that these are strong reasons for us to want to make the unit size to be something like 2MB - on 64-bit x86 at least.
( Using a 2MB unit size will also have another advantage: _iff_
we can still allocate a hugepage at that point we can map it straight there when extending the dynamic area. )
Ingo
Tejun Heo
maintainerHi,
Ingo Molnar wrote:
--snip--
Quoted 7 lines
So what i'm saying is that these are strong reasons for us to want to make the unit size to be something like 2MB - on 64-bit x86 at least.
( Using a 2MB unit size will also have another advantage: _iff_
we can still allocate a hugepage at that point we can map it straight there when extending the dynamic area. )
Thanks for the explanation. Yeap, it would be nice to have units aligned on 2MB boundary. We'll need to add @align to vm area alloc function to do it correctly. As for using large page, it would be nice if we can do that automatically. Upfront 2MB unit allocation is probably too expensive but merging 4k pages into a large page (if we can get them) will add a lot of irregular latency too. Hmmm...
Signature · 1 line
tejun
Quoted 12 lines · Tejun Heo
Hi,
Ingo Molnar wrote:
--snip--Quoted 7 lines
So what i'm saying is that these are strong reasons for us to want to make the unit size to be something like 2MB - on 64-bit x86 at least.
( Using a 2MB unit size will also have another advantage: _iff_
we can still allocate a hugepage at that point we can map it straight there when extending the dynamic area. )
Quoted 7 lines
Thanks for the explanation. Yeap, it would be nice to have units aligned on 2MB boundary. We'll need to add @align to vm area alloc function to do it correctly. As for using large page, it would be nice if we can do that automatically. Upfront 2MB unit allocation is probably too expensive but merging 4k pages into a large page (if we can get them) will add a lot of irregular latency too. Hmmm...
Yeah, largepage support - if we ever get there (the chances of finding a proper 2MB aligned 2MB sized chunk of physical memory are not very good except the first few minutes of uptime), should indeed be automatic to all get_vm_area() users - vmalloc(), ioremap() and now percpu.c.
I think a far more realistic angle to utilize more of the 2MB TLB will be to gradually increase PERCPU_ENOUGH_ROOM, as we observe more and more percpu_alloc() sites in the kernel. Right now it's pretty rare so going beyond the 8K we do for modules would probably be a waste of RAM.
Ingo
Quoted 22 lines · On Wednesday 25 February 2009 02:19:20 Ingo Molnar wrote:
Quoted 13 lines · Tejun Heo
Hi,
Ingo Molnar wrote:
--snip--Quoted 7 lines
So what i'm saying is that these are strong reasons for us to want to make the unit size to be something like 2MB - on 64-bit x86 at least.
( Using a 2MB unit size will also have another advantage: _iff_
we can still allocate a hugepage at that point we can map it straight there when extending the dynamic area. )Quoted 7 lines
Thanks for the explanation. Yeap, it would be nice to have units aligned on 2MB boundary. We'll need to add @align to vm area alloc function to do it correctly. As for using large page, it would be nice if we can do that automatically. Upfront 2MB unit allocation is probably too expensive but merging 4k pages into a large page (if we can get them) will add a lot of irregular latency too. Hmmm...
Quoted 5 lines
Yeah, largepage support - if we ever get there (the chances of finding a proper 2MB aligned 2MB sized chunk of physical memory are not very good except the first few minutes of uptime), should indeed be automatic to all
get_vm_area()users -vmalloc(),ioremap()and nowpercpu.c.
The problem is that it doesn't always know what the callers want. It would be trivial (there is already support in the virtual address allocator) to specify alignment. Then kernel page table setup could presumably use larger size mappings if it is given contiguous memory.
Quoted 5 lines
I think a far more realistic angle to utilize more of the 2MB TLB will be to gradually increase
PERCPU_ENOUGH_ROOM, as we observe more and morepercpu_alloc()sites in the kernel. Right now it's pretty rare so going beyond the 8K we do for modules would probably be a waste of RAM.
It might possibly be useful for smaller NUMA machines using hashdist for the big early hashes (hash sizes scale log, but number of nodes tends to scale linearly with memory size, so 2MB per node for hashes would probably be far too much on big machines).
Quoted 6 lines · Tejun Heo
Quoted 1 line
and i think that abstraction is wrong.
No, it's not wrong. It simply is irrelevant - it's congruent vs. contiguos and all that we need is congruent. Contiguous of course achieves congruent but it doesn't make any difference for this purpose.
Well, as long as we can go up in unit size to 2MB (on 64-bit x86) i'm fine with that model.
There's no granularity artifacts, right? pcpu_populate_chunk() intelligently only populates pages on an as-needed basis, so extending the percpu areas with a 2MB unit does not trigger nr_cpus*2MB allocations straight away.
The code looks very clean and if we can agree on the SMP/NUMA symmetry and the dynamic-ptr optimizations that it allows, plus if you can up the unit size to 2MB on 64-bit x86, i'm a happy camper and will pull it.
Ingo
Tejun Heo
maintainerHello, Ingo.
Quoted 10 lines · Ingo Molnar
Quoted 5 lines · Tejun Heo
Quoted 1 line
and i think that abstraction is wrong.
No, it's not wrong. It simply is irrelevant - it's congruent vs. contiguos and all that we need is congruent. Contiguous of course achieves congruent but it doesn't make any difference for this purpose.
Well, as long as we can go up in unit size to 2MB (on 64-bit x86) i'm fine with that model.
Yeap, it defintely can.
Quoted 4 lines
There's no granularity artifacts, right?
pcpu_populate_chunk()intelligently only populates pages on an as-needed basis, so extending the percpu areas with a 2MB unit does not trigger nr_cpus*2MB allocations straight away.
Yeap, it doesn't although reclamation is done per-chunk currently.
Quoted 4 lines
The code looks very clean and if we can agree on the SMP/NUMA symmetry and the dynamic-ptr optimizations that it allows, plus if you can up the unit size to 2MB on 64-bit x86, i'm a happy camper and will pull it.
Sounds good. Thanks.
Signature · 1 line
tejun
Quoted 10 lines · Tejun Heo
Hello, all.
This patchset improves the first percpu chunk allocation. The problem is that the dynamic percpu area allocation maps the whole percpu area into vmalloc area using 4k mappings which adds considerable amount of TLB pressure.
This patchset is available in the following git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.gittj-percpu
ok, i pulled it into tip:core/percpu (one conflict resolution done - please double check it), and exposed it to -tip testing briefly.
Six x86 test-systems failed ;-) One of them had this panic:
Scan SMP from ffff880000000000 for 1024 bytes.
Scan SMP from ffff88000009fc00 for 1024 bytes.
Scan SMP from ffff8800000f0000 for 65536 bytes.
found SMP MP-table at [ffff8800000fe680] fe680
PANIC: early exception 0 rip : error cr2
PANIC: early exception 0 rip : error cr2
config attached. Ought to be easy to reproduce.
Ingo
# head: 51113c9e
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc6
# Tue Feb 24 20:46:20 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
# CONFIG_BOOTPARAM_SUPPORT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=y
# CONFIG_BROKEN_BOOT_ALLOWED4 is not set
# CONFIG_BROKEN_BOOT_EUROPE is not set
# CONFIG_BROKEN_BOOT_TITAN is not setCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_SWAP=y
# CONFIG_SYSVIPC is not setCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not setCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not setCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=21CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not setCONFIG_CGROUPS=yCONFIG_CGROUP_DEBUG=yCONFIG_CGROUP_NS=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not setCONFIG_RESOURCE_COUNTERS=yCONFIG_CGROUP_MEM_RES_CTLR=yCONFIG_CGROUP_MEM_RES_CTLR_SWAP=yCONFIG_MM_OWNER=yCONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=y
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_ELF_CORE is not setCONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=y
# CONFIG_AIO is not setCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_PCI_QUIRKS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=y
# CONFIG_OPROFILE is not setCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not setCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP_SUPPORT=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not setCONFIG_X86_UV=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not setCONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_XEN_MAX_DOMAIN_MEMORY=32CONFIG_XEN_SAVE_RESTORE=yCONFIG_XEN_DEBUG_FS=yCONFIG_KVM_CLOCK=yCONFIG_KVM_GUEST=yCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=yCONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not setCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR_64=yCONFIG_X86_DS=yCONFIG_X86_PTRACE_BTS=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not setCONFIG_MAXSMP=yCONFIG_NR_CPUS=4096CONFIG_SCHED_SMT=y
# CONFIG_SCHED_MC is not setCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not setCONFIG_I8K=yCONFIG_MICROCODE=yCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not setCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_UP_WANTED_1=yCONFIG_UP_WANTED_2=yCONFIG_UP_WANTED=yCONFIG_SMP=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
# CONFIG_X86_64_ACPI_NUMA is not set
# CONFIG_NUMA_EMU is not setCONFIG_NODES_SHIFT=9CONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not setCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_UNEVICTABLE_LRU=yCONFIG_MMU_NOTIFIER=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not setCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not setCONFIG_EFI=yCONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not setCONFIG_CRASH_DUMP=yCONFIG_PHYSICAL_START=0x200000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x200000CONFIG_HOTPLUG_CPU=yCONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#CONFIG_PM=yCONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not setCONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not setCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not setCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=y
# CONFIG_ACPI_AC is not setCONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_FAN is not setCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_NUMA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=yCONFIG_ACPI_DEBUG_FUNC_TRACE=y
# CONFIG_ACPI_PCI_SLOT is not setCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K8 is not setCONFIG_X86_SPEEDSTEP_CENTRINO=yCONFIG_X86_P4_CLOCKMOD=y
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=y CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not setCONFIG_PCI_DOMAINS=yCONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not setCONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_NET=y
#
# Networking options
#CONFIG_COMPAT_NET_DEV_OPS=yCONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not setCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=yCONFIG_ARPD=yCONFIG_SYN_COOKIES=yCONFIG_INET_AH=yCONFIG_INET_ESP=yCONFIG_INET_IPCOMP=yCONFIG_INET_XFRM_TUNNEL=yCONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not setCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=yCONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not setCONFIG_TCP_CONG_HYBLA=yCONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not setCONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not setCONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=yCONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XT_TARGET_MARK=yCONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not setCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_IPTABLES is not setCONFIG_IP_DCCP=yCONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2_DEBUG=y
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not setCONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_TIPC=yCONFIG_TIPC_ADVANCED=yCONFIG_TIPC_ZONES=3CONFIG_TIPC_CLUSTERS=1CONFIG_TIPC_NODES=255CONFIG_TIPC_SLAVE_NODES=0CONFIG_TIPC_PORTS=8191CONFIG_TIPC_LOG=0CONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_GARP=yCONFIG_BRIDGE=yCONFIG_NET_DSA=y
# CONFIG_NET_DSA_TAG_DSA is not set
# CONFIG_NET_DSA_TAG_EDSA is not setCONFIG_NET_DSA_TAG_TRAILER=y
# CONFIG_NET_DSA_MV88E6XXX is not setCONFIG_NET_DSA_MV88E6060=y
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not setCONFIG_VLAN_8021Q=yCONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not setCONFIG_LLC=y
# CONFIG_LLC2 is not setCONFIG_IPX=yCONFIG_IPX_INTERN=yCONFIG_ATALK=yCONFIG_DEV_APPLETALK=yCONFIG_IPDDP=yCONFIG_IPDDP_ENCAP=y
# CONFIG_IPDDP_DECAP is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not setCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=y
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not setCONFIG_DCB=y
#
# Network testing
#CONFIG_NET_PKTGEN=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not setCONFIG_CAN=yCONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=yCONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not setCONFIG_BT=y
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not setCONFIG_BT_HCIBCM203X=yCONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not setCONFIG_BT_HCIVHCI=yCONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=yCONFIG_PHONET=yCONFIG_WIRELESS=yCONFIG_CFG80211=yCONFIG_CFG80211_REG_DEBUG=y
# CONFIG_NL80211 is not setCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not setCONFIG_MAC80211=y
#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_PID is not set CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel" CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=y CONFIG_MAC80211_DEBUGFS=y CONFIG_MAC80211_DEBUG_MENU=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set CONFIG_MAC80211_NOINLINE=y CONFIG_MAC80211_VERBOSE_DEBUG=y CONFIG_MAC80211_HT_DEBUG=y CONFIG_MAC80211_TKIP_DEBUG=y CONFIG_MAC80211_IBSS_DEBUG=y CONFIG_MAC80211_VERBOSE_PS_DEBUG=y CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y CONFIG_MAC80211_DEBUG_COUNTERS=y
# CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG is not set # CONFIG_WIMAX is not setCONFIG_RFKILL=yCONFIG_RFKILL_INPUT=yCONFIG_RFKILL_LEDS=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not setCONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_FIFO=yCONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=yCONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=yCONFIG_XEN_BLKDEV_FRONTEND=yCONFIG_BLK_DEV_HD=yCONFIG_MISC_DEVICES=yCONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not setCONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not setCONFIG_ICS932S401=yCONFIG_ENCLOSURE_SERVICES=yCONFIG_SGI_XP=y
# CONFIG_HP_ILO is not setCONFIG_SGI_GRU=yCONFIG_SGI_GRU_DEBUG=yCONFIG_DELL_LAPTOP=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not setCONFIG_EEPROM_LEGACY=yCONFIG_EEPROM_93CX6=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#CONFIG_RAID_ATTRS=yCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=yCONFIG_CHR_DEV_OSST=y
# CONFIG_BLK_DEV_SR is not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=yCONFIG_SCSI_ENCLOSURE=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=yCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=yCONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SRP_ATTRS is not setCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=yCONFIG_SCSI_CXGB3_ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not setCONFIG_SCSI_3W_9XXX=yCONFIG_SCSI_ACARD=yCONFIG_SCSI_AACRAID=yCONFIG_SCSI_AIC7XXX=yCONFIG_AIC7XXX_CMDS_PER_DEVICE=32CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not setCONFIG_SCSI_AIC7XXX_OLD=yCONFIG_SCSI_AIC79XX=yCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_DPT_I2O is not setCONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not setCONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not setCONFIG_MEGARAID_LEGACY=y
# CONFIG_MEGARAID_SAS is not setCONFIG_SCSI_HPTIOP=yCONFIG_SCSI_BUSLOGIC=y
# CONFIG_LIBFC is not set
# CONFIG_FCOE is not setCONFIG_SCSI_DMX3191D=yCONFIG_SCSI_EATA=yCONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not setCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=y
# CONFIG_SCSI_GDTH is not setCONFIG_SCSI_IPS=yCONFIG_SCSI_INITIO=yCONFIG_SCSI_INIA100=yCONFIG_SCSI_PPA=y
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_STEX=y
# CONFIG_SCSI_SYM53C8XX_2 is not setCONFIG_SCSI_IPR=yCONFIG_SCSI_IPR_TRACE=yCONFIG_SCSI_IPR_DUMP=yCONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not setCONFIG_SCSI_LPFC=yCONFIG_SCSI_LPFC_DEBUG_FS=y
CONFIG_SCSI_DC395x=yCONFIG_SCSI_DC390T=y
# CONFIG_SCSI_SRP is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=yCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not setCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=yCONFIG_SATA_SX4=y
# CONFIG_SATA_SIL is not setCONFIG_SATA_SIS=yCONFIG_SATA_ULI=yCONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not setCONFIG_SATA_INIC162X=yCONFIG_PATA_ACPI=y
# CONFIG_PATA_ALI is not setCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=yCONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not setCONFIG_PATA_EFAR=yCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=yCONFIG_PATA_HPT3X3=y
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_IT821X=yCONFIG_PATA_IT8213=yCONFIG_PATA_JMICRON=yCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=yCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not setCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=yCONFIG_PATA_NS87415=yCONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not setCONFIG_PATA_RZ1000=yCONFIG_PATA_SC1200=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not setCONFIG_PATA_SIS=yCONFIG_PATA_VIA=yCONFIG_PATA_WINBOND=yCONFIG_PATA_PLATFORM=yCONFIG_PATA_SCH=yCONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #CONFIG_FIREWIRE=yCONFIG_FIREWIRE_OHCI=yCONFIG_FIREWIRE_OHCI_DEBUG=yCONFIG_FIREWIRE_SBP2=yCONFIG_IEEE1394=y
# CONFIG_IEEE1394_OHCI1394 is not set CONFIG_IEEE1394_PCILYNX=yCONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y CONFIG_IEEE1394_ETH1394=yCONFIG_IEEE1394_RAWIO=yCONFIG_IEEE1394_VERBOSEDEBUG=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not setCONFIG_NETDEVICES=yCONFIG_DUMMY=yCONFIG_BONDING=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=yCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set CONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set CONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=yCONFIG_CASSINI=yCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=yCONFIG_TYPHOON=yCONFIG_ENC28J60=y
# CONFIG_ENC28J60_WRITEVERIFY is not set CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not setCONFIG_TULIP=yCONFIG_TULIP_MWI=yCONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=yCONFIG_WINBOND_840=y
# CONFIG_DM9102 is not set CONFIG_ULI526X=yCONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=yCONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=yCONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=yCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=yCONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=y
# CONFIG_R6040 is not setCONFIG_SIS900=y
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=yCONFIG_SUNDANCE=yCONFIG_SUNDANCE_MMIO=yCONFIG_TLAN=yCONFIG_VIA_RHINE=yCONFIG_VIA_RHINE_MMIO=yCONFIG_SC92031=yCONFIG_NET_POCKET=yCONFIG_ATP=yCONFIG_DE600=y
# CONFIG_DE620 is not setCONFIG_ATL2=yCONFIG_NETDEV_1000=yCONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not setCONFIG_E1000=yCONFIG_E1000E=yCONFIG_IP1000=y
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set CONFIG_HAMACHI=yCONFIG_YELLOWFIN=y
# CONFIG_R8169 is not setCONFIG_SIS190=yCONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set CONFIG_SKY2=yCONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=yCONFIG_BNX2=yCONFIG_QLA3XXX=y
# CONFIG_ATL1 is not setCONFIG_ATL1E=yCONFIG_JME=yCONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=yCONFIG_ENIC=yCONFIG_IXGBE=yCONFIG_IXGBE_DCA=yCONFIG_IXGBE_DCB=y
# CONFIG_IXGB is not set
# CONFIG_S2IO is not setCONFIG_MYRI10GE=yCONFIG_MYRI10GE_DCA=yCONFIG_NIU=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not setCONFIG_BNX2X=yCONFIG_QLGE=yCONFIG_SFC=yCONFIG_TR=yCONFIG_IBMOL=y
# CONFIG_3C359 is not set CONFIG_TMS380TR=yCONFIG_TMSPCI=yCONFIG_ABYSS=y
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#CONFIG_USB_CATC=yCONFIG_USB_KAWETH=yCONFIG_USB_PEGASUS=yCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=y
# CONFIG_USB_NET_NET1080 is not setCONFIG_USB_NET_PLUSB=yCONFIG_USB_NET_MCS7830=yCONFIG_USB_NET_RNDIS_HOST=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not setCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=yCONFIG_USB_HSO=y
# CONFIG_WAN is not setCONFIG_XEN_NETDEV_FRONTEND=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not setCONFIG_PLIP=y
# CONFIG_PPP is not set
# CONFIG_SLIP is not setCONFIG_SLHC=yCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_ISDN=yCONFIG_ISDN_I4L=yCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=y
# CONFIG_ISDN_MPP is not setCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=yCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#CONFIG_ISDN_DRV_GIGASET=yCONFIG_GIGASET_BASE=yCONFIG_GIGASET_M105=yCONFIG_GIGASET_M101=y
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not setCONFIG_ISDN_CAPI=yCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
# CONFIG_CAPI_TRACE is not set
# CONFIG_ISDN_CAPI_MIDDLEWARE is not setCONFIG_ISDN_CAPI_CAPI20=yCONFIG_ISDN_CAPI_CAPIDRV=y
#
# CAPI hardware drivers
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=yCONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
# CONFIG_ISDN_DRV_AVMB1_B1PCMCIA is not setCONFIG_ISDN_DRV_AVMB1_T1PCI=y
# CONFIG_ISDN_DRV_AVMB1_C4 is not setCONFIG_CAPI_EICON=y
# CONFIG_ISDN_DIVAS is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=yCONFIG_XEN_KBDDEV_FRONTEND=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=yCONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not setCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=yCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=yCONFIG_JOYSTICK_COBRA=yCONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not setCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not setCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=yCONFIG_JOYSTICK_ZHENHUA=yCONFIG_JOYSTICK_DB9=y
# CONFIG_JOYSTICK_GAMECON is not setCONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not setCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=y
# CONFIG_JOYSTICK_XPAD_LEDS is not setCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=yCONFIG_TABLET_USB_AIPTEK=y
# CONFIG_TABLET_USB_GTCO is not setCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=y
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not setCONFIG_INPUT_ATLAS_BTNS=yCONFIG_INPUT_ATI_REMOTE=yCONFIG_INPUT_ATI_REMOTE2=yCONFIG_INPUT_KEYSPAN_REMOTE=y
# CONFIG_INPUT_POWERMATE is not setCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_UINPUT=y
# CONFIG_INPUT_PCF50633_PMU is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not setCONFIG_SERIO_PARKBD=y
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not setCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not setCONFIG_ROCKETPORT=yCONFIG_CYCLADES=y
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not setCONFIG_MOXA_INTELLIO=y
# CONFIG_MOXA_SMARTIO is not setCONFIG_ISI=yCONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not setCONFIG_SYNCLINK_GT=yCONFIG_N_HDLC=yCONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not setCONFIG_RIO=yCONFIG_RIO_OLDPCI=yCONFIG_STALDRV=y
# CONFIG_STALLION is not setCONFIG_ISTALLION=yCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not setCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not setCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not setCONFIG_PPDEV=yCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=yCONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not setCONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not setCONFIG_NVRAM=yCONFIG_R3964=yCONFIG_APPLICOM=y
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=yCONFIG_RAW_DRIVER=yCONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCF=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=yCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=yCONFIG_I2C_AMD756=yCONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not setCONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not setCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIA=yCONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not setCONFIG_I2C_PARPORT_LIGHT=yCONFIG_I2C_TAOS_EVM=yCONFIG_I2C_TINY_USB=y
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#CONFIG_DS1682=yCONFIG_SENSORS_PCF8574=yCONFIG_PCF8575=yCONFIG_SENSORS_PCA9539=y
# CONFIG_SENSORS_PCF8591 is not setCONFIG_SENSORS_MAX6875=y
# CONFIG_SENSORS_TSL2550 is not setCONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_I2C_DEBUG_CHIP=yCONFIG_SPI=yCONFIG_SPI_DEBUG=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=y
# CONFIG_SPI_BUTTERFLY is not setCONFIG_SPI_LM70_LLP=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not setCONFIG_SPI_TLE62X0=yCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=yCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=yCONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=yCONFIG_W1_SLAVE_SMEM=yCONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=yCONFIG_W1_SLAVE_BQ27000=yCONFIG_POWER_SUPPLY=yCONFIG_POWER_SUPPLY_DEBUG=yCONFIG_PDA_POWER=yCONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_BQ27x00=yCONFIG_BATTERY_DA9030=yCONFIG_CHARGER_PCF50633=yCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not setCONFIG_SENSORS_ABITUGURU3=yCONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not setCONFIG_SENSORS_ADM1025=yCONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not setCONFIG_SENSORS_ADM1031=yCONFIG_SENSORS_ADM9240=yCONFIG_SENSORS_ADT7462=yCONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not setCONFIG_SENSORS_ASB100=yCONFIG_SENSORS_ATXP1=yCONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not setCONFIG_SENSORS_F71882FG=yCONFIG_SENSORS_F75375S=yCONFIG_SENSORS_FSCHER=yCONFIG_SENSORS_FSCPOS=yCONFIG_SENSORS_FSCHMD=yCONFIG_SENSORS_GL518SM=yCONFIG_SENSORS_GL520SM=yCONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not setCONFIG_SENSORS_IBMPEX=yCONFIG_SENSORS_IT87=yCONFIG_SENSORS_LM63=yCONFIG_SENSORS_LM70=y
# CONFIG_SENSORS_LM75 is not setCONFIG_SENSORS_LM77=yCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not setCONFIG_SENSORS_LM85=yCONFIG_SENSORS_LM87=yCONFIG_SENSORS_LM90=yCONFIG_SENSORS_LM92=yCONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LTC4245 is not setCONFIG_SENSORS_MAX1111=yCONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not setCONFIG_SENSORS_SIS5595=yCONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not setCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_THMC50 is not setCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not setCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=yCONFIG_SENSORS_W83L785TS=yCONFIG_SENSORS_W83L786NG=yCONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not setCONFIG_SENSORS_HDAPS=yCONFIG_SENSORS_LIS3LV02D=yCONFIG_SENSORS_APPLESMC=yCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=yCONFIG_WATCHDOG=yCONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not setCONFIG_ACQUIRE_WDT=yCONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not setCONFIG_SC520_WDT=yCONFIG_IB700_WDT=yCONFIG_IBMASR=y
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not setCONFIG_ITCO_WDT=yCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=yCONFIG_IT87_WDT=yCONFIG_HP_WATCHDOG=yCONFIG_SC1200_WDT=yCONFIG_PC87413_WDT=y
# CONFIG_60XX_WDT is not setCONFIG_SBC8360_WDT=yCONFIG_CPU5_WDT=yCONFIG_SMSC_SCH311X_WDT=yCONFIG_SMSC37B787_WDT=yCONFIG_W83627HF_WDT=yCONFIG_W83697HF_WDT=yCONFIG_W83697UG_WDT=yCONFIG_W83877F_WDT=yCONFIG_W83977F_WDT=y
# CONFIG_MACHZ_WDT is not setCONFIG_SBC_EPX_C3_WATCHDOG=y
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=y
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=yCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not setCONFIG_HTC_PASIC3=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not setCONFIG_PMIC_DA903X=yCONFIG_MFD_WM8400=yCONFIG_MFD_PCF50633=y
# CONFIG_PCF50633_ADC is not setCONFIG_PCF50633_GPIO=y
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not setCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=yCONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#CONFIG_VIDEO_SAA7146=yCONFIG_VIDEO_SAA7146_VV=yCONFIG_MEDIA_TUNER=yCONFIG_MEDIA_TUNER_CUSTOMIZE=yCONFIG_MEDIA_TUNER_SIMPLE=yCONFIG_MEDIA_TUNER_TDA8290=yCONFIG_MEDIA_TUNER_TDA827X=yCONFIG_MEDIA_TUNER_TDA18271=yCONFIG_MEDIA_TUNER_TDA9887=yCONFIG_MEDIA_TUNER_TEA5761=yCONFIG_MEDIA_TUNER_TEA5767=y
# CONFIG_MEDIA_TUNER_MT20XX is not setCONFIG_MEDIA_TUNER_MT2060=y
# CONFIG_MEDIA_TUNER_MT2266 is not setCONFIG_MEDIA_TUNER_MT2131=yCONFIG_MEDIA_TUNER_QT1010=yCONFIG_MEDIA_TUNER_XC2028=yCONFIG_MEDIA_TUNER_XC5000=yCONFIG_MEDIA_TUNER_MXL5005S=yCONFIG_MEDIA_TUNER_MXL5007T=yCONFIG_VIDEO_V4L2=yCONFIG_VIDEOBUF_GEN=yCONFIG_VIDEOBUF_DMA_SG=yCONFIG_VIDEOBUF_DVB=yCONFIG_VIDEO_BTCX=yCONFIG_VIDEO_IR=yCONFIG_VIDEO_TVEEPROM=yCONFIG_VIDEO_TUNER=yCONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_FIXED_MINOR_RANGES=yCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=yCONFIG_VIDEO_TVAUDIO=yCONFIG_VIDEO_TDA7432=yCONFIG_VIDEO_TDA9875=yCONFIG_VIDEO_MSP3400=yCONFIG_VIDEO_CS5345=yCONFIG_VIDEO_CS53L32A=yCONFIG_VIDEO_M52790=yCONFIG_VIDEO_WM8775=yCONFIG_VIDEO_WM8739=yCONFIG_VIDEO_VP27SMPX=yCONFIG_VIDEO_SAA711X=yCONFIG_VIDEO_SAA717X=yCONFIG_VIDEO_CX25840=yCONFIG_VIDEO_CX2341X=yCONFIG_VIDEO_SAA7127=yCONFIG_VIDEO_UPD64031A=yCONFIG_VIDEO_UPD64083=y
# CONFIG_VIDEO_VIVI is not setCONFIG_VIDEO_BT848=yCONFIG_VIDEO_BT848_DVB=y
# CONFIG_VIDEO_SAA6588 is not setCONFIG_VIDEO_SAA5246A=yCONFIG_VIDEO_SAA5249=yCONFIG_VIDEO_SAA7134=yCONFIG_VIDEO_SAA7134_ALSA=yCONFIG_VIDEO_SAA7134_DVB=y
# CONFIG_VIDEO_HEXIUM_ORION is not setCONFIG_VIDEO_HEXIUM_GEMINI=yCONFIG_VIDEO_CX23885=yCONFIG_VIDEO_AU0828=yCONFIG_VIDEO_IVTV=y
# CONFIG_VIDEO_FB_IVTV is not setCONFIG_VIDEO_CX18=y
# CONFIG_VIDEO_CAFE_CCIC is not setCONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9M001 is not setCONFIG_SOC_CAMERA_MT9M111=yCONFIG_SOC_CAMERA_MT9T031=yCONFIG_SOC_CAMERA_MT9V022=yCONFIG_SOC_CAMERA_TW9910=yCONFIG_SOC_CAMERA_PLATFORM=yCONFIG_SOC_CAMERA_OV772X=y
# CONFIG_V4L_USB_DRIVERS is not setCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_GEMTEK_PCI=yCONFIG_RADIO_MAXIRADIO=yCONFIG_RADIO_MAESTRO=y
# CONFIG_USB_DSBR is not set
# CONFIG_USB_SI470X is not setCONFIG_USB_MR800=y
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DVB_DYNAMIC_MINORS is not setCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_TTPCI_EEPROM=y
# CONFIG_DVB_AV7110 is not setCONFIG_DVB_BUDGET_CORE=y
# CONFIG_DVB_BUDGET is not setCONFIG_DVB_BUDGET_CI=yCONFIG_DVB_BUDGET_AV=y
#
# Supported USB Adapters
#CONFIG_DVB_USB=y
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not setCONFIG_DVB_USB_DIBUSB_MC=yCONFIG_DVB_USB_DIB0700=yCONFIG_DVB_USB_UMT_010=y
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not setCONFIG_DVB_USB_DIGITV=y
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not setCONFIG_DVB_USB_GP8PSK=yCONFIG_DVB_USB_NOVA_T_USB2=yCONFIG_DVB_USB_TTUSB2=y
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_DW2102 is not setCONFIG_DVB_USB_CINERGY_T2=yCONFIG_DVB_USB_ANYSEE=y
# CONFIG_DVB_USB_DTV5100 is not setCONFIG_DVB_USB_AF9015=yCONFIG_DVB_TTUSB_BUDGET=yCONFIG_DVB_TTUSB_DEC=yCONFIG_DVB_SIANO_SMS1XXX=yCONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#CONFIG_DVB_BT8XX=y
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=y
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=yCONFIG_DVB_STB6100=y
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=y
# CONFIG_DVB_CX24123 is not setCONFIG_DVB_MT312=y
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not setCONFIG_DVB_STB6000=yCONFIG_DVB_STV0299=yCONFIG_DVB_TDA8083=y
# CONFIG_DVB_TDA10086 is not setCONFIG_DVB_TDA8261=yCONFIG_DVB_VES1X93=yCONFIG_DVB_TUNER_ITD1000=yCONFIG_DVB_TUNER_CX24113=yCONFIG_DVB_TDA826X=yCONFIG_DVB_TUA6100=yCONFIG_DVB_CX24116=y
# CONFIG_DVB_SI21XX is not set
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=y
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not setCONFIG_DVB_DRX397XD=yCONFIG_DVB_L64781=yCONFIG_DVB_TDA1004X=yCONFIG_DVB_NXT6000=y
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not setCONFIG_DVB_DIB3000MB=yCONFIG_DVB_DIB3000MC=yCONFIG_DVB_DIB7000M=yCONFIG_DVB_DIB7000P=yCONFIG_DVB_TDA10048=y
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=y
# CONFIG_DVB_TDA10021 is not setCONFIG_DVB_TDA10023=yCONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=y
# CONFIG_DVB_OR51211 is not setCONFIG_DVB_OR51132=y
# CONFIG_DVB_BCM3510 is not set CONFIG_DVB_LGDT330X=yCONFIG_DVB_LGDT3304=yCONFIG_DVB_S5H1409=yCONFIG_DVB_AU8522=yCONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
#
# Digital terrestrial only tuners/PLL
#
# CONFIG_DVB_PLL is not setCONFIG_DVB_TUNER_DIB0070=y
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not setCONFIG_DVB_ISL6405=yCONFIG_DVB_ISL6421=yCONFIG_DVB_LGS8GL5=y
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=yCONFIG_DVB_AF9013=y
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=yCONFIG_AGP_SIS=y
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not setCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=yCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_FOREIGN_ENDIAN=yCONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not setCONFIG_FB_BACKLIGHT=yCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=y
# CONFIG_FB_ARC is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not setCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not setCONFIG_FB_HGA=y
# CONFIG_FB_HGA_ACCEL is not setCONFIG_FB_S1D13XXX=y
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not setCONFIG_FB_LE80578=yCONFIG_FB_CARILLO_RANCH=yCONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not setCONFIG_FB_INTEL_I2C=yCONFIG_FB_MATROX=yCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not setCONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_ATY128 is not setCONFIG_FB_ATY=yCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=yCONFIG_FB_ATY_BACKLIGHT=y
# CONFIG_FB_S3 is not setCONFIG_FB_SAVAGE=yCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not setCONFIG_FB_VIA=yCONFIG_FB_NEOMAGIC=y
# CONFIG_FB_KYRO is not setCONFIG_FB_3DFX=yCONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_VOODOO1 is not setCONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not setCONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not setCONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not setCONFIG_FB_GEODE_GX=y
# CONFIG_FB_GEODE_GX1 is not setCONFIG_FB_TMIO=yCONFIG_FB_TMIO_ACCELL=yCONFIG_XEN_FBDEV_FRONTEND=y
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not setCONFIG_LCD_ILI9320=y
# CONFIG_LCD_TDO24M is not setCONFIG_LCD_VGG2432A4=yCONFIG_LCD_PLATFORM=yCONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not setCONFIG_BACKLIGHT_PROGEAR=yCONFIG_BACKLIGHT_CARILLO_RANCH=yCONFIG_BACKLIGHT_DA903X=yCONFIG_BACKLIGHT_MBP_NVIDIA=y
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not setCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=yCONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_RAWMIDI=yCONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not setCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=yCONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not setCONFIG_SND_MPU401_UART=yCONFIG_SND_DRIVERS=yCONFIG_SND_DUMMY=y
# CONFIG_SND_VIRMIDI is not setCONFIG_SND_MTS64=yCONFIG_SND_SERIAL_U16550=yCONFIG_SND_MPU401=y
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_PCI is not setCONFIG_SND_SPI=y
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not setCONFIG_SOUND_PRIME=yCONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not setCONFIG_SOUND_DMAP=yCONFIG_SOUND_SSCAPE=y
# CONFIG_SOUND_VMIDI is not setCONFIG_SOUND_TRIX=y
# CONFIG_SOUND_MSS is not setCONFIG_SOUND_MPU401=y
# CONFIG_SOUND_PAS is not setCONFIG_SOUND_PSS=yCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=yCONFIG_SOUND_YM3812=yCONFIG_SOUND_UART6850=yCONFIG_SOUND_AEDSP16=y
# CONFIG_SC6600 is not setCONFIG_SOUND_KAHLUA=y
# CONFIG_HID_SUPPORT is not setCONFIG_USB_MOUSE=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=yCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=yCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not setCONFIG_USB_WUSB=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=yCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=yCONFIG_USB_OXU210HP_HCD=yCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not setCONFIG_USB_SL811_HCD=yCONFIG_USB_R8A66597_HCD=yCONFIG_USB_HWA_HCD=y
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; #
#
# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#CONFIG_USB_MDC800=yCONFIG_USB_MICROTEK=y
#
# USB port drivers
#CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=yCONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not setCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=y
# CONFIG_USB_LEGOTOWER is not setCONFIG_USB_LCD=yCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not setCONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not setCONFIG_USB_IDMOUSE=yCONFIG_USB_FTDI_ELAN=yCONFIG_USB_APPLEDISPLAY=yCONFIG_USB_SISUSBVGA=yCONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not setCONFIG_USB_TRANCEVIBRATOR=yCONFIG_USB_IOWARRIOR=yCONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
#
# OTG and related infrastructure
#CONFIG_UWB=yCONFIG_UWB_HWA=yCONFIG_UWB_WHCI=y
# CONFIG_UWB_WLP is not setCONFIG_UWB_I1480U=y
# CONFIG_MMC is not setCONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MSPRO_BLOCK is not set
#
# MemoryStick Host Controller Drivers
#CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#CONFIG_LEDS_ALIX2=yCONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DA903X is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=yCONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not setCONFIG_LEDS_TRIGGER_DEFAULT_ON=y
# CONFIG_ACCESSIBILITY is not setCONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_E752X=yCONFIG_EDAC_I82975X=y
# CONFIG_EDAC_I3000 is not setCONFIG_EDAC_X38=yCONFIG_EDAC_I5400=y
# CONFIG_EDAC_I5000 is not setCONFIG_EDAC_I5100=yCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not setCONFIG_RTC_INTF_DEV=yCONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not setCONFIG_RTC_DRV_MAX6900=y
# CONFIG_RTC_DRV_RS5C372 is not setCONFIG_RTC_DRV_ISL1208=yCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF8563=yCONFIG_RTC_DRV_PCF8583=yCONFIG_RTC_DRV_M41T80=yCONFIG_RTC_DRV_M41T80_WDT=yCONFIG_RTC_DRV_S35390A=yCONFIG_RTC_DRV_FM3130=yCONFIG_RTC_DRV_RX8581=y
#
# SPI RTC drivers
#CONFIG_RTC_DRV_M41T94=yCONFIG_RTC_DRV_DS1305=yCONFIG_RTC_DRV_DS1390=yCONFIG_RTC_DRV_MAX6902=yCONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not setCONFIG_RTC_DRV_DS3234=y
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=yCONFIG_RTC_DRV_DS1286=yCONFIG_RTC_DRV_DS1511=yCONFIG_RTC_DRV_DS1553=yCONFIG_RTC_DRV_DS1742=y
# CONFIG_RTC_DRV_STK17TA8 is not setCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=yCONFIG_RTC_DRV_M48T59=yCONFIG_RTC_DRV_BQ4802=yCONFIG_RTC_DRV_V3020=yCONFIG_RTC_DRV_PCF50633=y
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=yCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=yCONFIG_DMATEST=yCONFIG_DCA=yCONFIG_AUXDISPLAY=yCONFIG_KS0108=yCONFIG_KS0108_PORT=0x378CONFIG_KS0108_DELAY=2
# CONFIG_CFAG12864B is not setCONFIG_UIO=y
# CONFIG_UIO_CIF is not setCONFIG_UIO_PDRV=yCONFIG_UIO_PDRV_GENIRQ=yCONFIG_UIO_SMX=yCONFIG_UIO_SERCOS3=yCONFIG_XEN_BALLOON=yCONFIG_XEN_SCRUB_PAGES=yCONFIG_XENFS=yCONFIG_XEN_COMPAT_XENFS=yCONFIG_X86_PLATFORM_DEVICES=yCONFIG_ACER_WMI=y
# CONFIG_FUJITSU_LAPTOP is not setCONFIG_HP_WMI=yCONFIG_MSI_LAPTOP=y
# CONFIG_PANASONIC_LAPTOP is not setCONFIG_COMPAL_LAPTOP=y
# CONFIG_SONY_LAPTOP is not setCONFIG_THINKPAD_ACPI=yCONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not setCONFIG_THINKPAD_ACPI_BAY=y
# CONFIG_THINKPAD_ACPI_VIDEO is not setCONFIG_THINKPAD_ACPI_HOTKEY_POLL=yCONFIG_INTEL_MENLOW=yCONFIG_EEEPC_LAPTOP=yCONFIG_ACPI_WMI=yCONFIG_ACPI_ASUS=yCONFIG_ACPI_TOSHIBA=y
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=y
# CONFIG_FIRMWARE_MEMMAP is not setCONFIG_EFI_VARS=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not setCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not setCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not setCONFIG_JFS_DEBUG=yCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=yCONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not setCONFIG_XFS_DEBUG=yCONFIG_GFS2_FS=yCONFIG_GFS2_FS_LOCKING_DLM=yCONFIG_OCFS2_FS=yCONFIG_OCFS2_FS_O2CB=y
# CONFIG_OCFS2_FS_USERSPACE_CLUSTER is not set
# CONFIG_OCFS2_FS_STATS is not setCONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not setCONFIG_OCFS2_FS_POSIX_ACL=yCONFIG_BTRFS_FS=yCONFIG_BTRFS_FS_POSIX_ACL=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not setCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=yCONFIG_MSDOS_FS=yCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not setCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=y
# CONFIG_TMPFS is not setCONFIG_HUGETLBFS=yCONFIG_HUGETLB_PAGE=yCONFIG_CONFIGFS_FS=yCONFIG_MISC_FILESYSTEMS=yCONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not setCONFIG_HFS_FS=yCONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not setCONFIG_BFS_FS=y
# CONFIG_EFS_FS is not setCONFIG_CRAMFS=yCONFIG_SQUASHFS=yCONFIG_SQUASHFS_EMBEDDED=yCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not setCONFIG_MINIX_FS=yCONFIG_OMFS_FS=yCONFIG_HPFS_FS=yCONFIG_QNX4FS_FS=y
# CONFIG_ROMFS_FS is not setCONFIG_SYSV_FS=yCONFIG_UFS_FS=yCONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=yCONFIG_NFSD=yCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_ACL_SUPPORT=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=yCONFIG_SUNRPC_REGISTER_V4=yCONFIG_RPCSEC_GSS_KRB5=yCONFIG_RPCSEC_GSS_SPKM3=y
# CONFIG_SMB_FS is not setCONFIG_CIFS=yCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not setCONFIG_CIFS_DEBUG2=yCONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_CIFS_DFS_UPCALL is not setCONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not setCONFIG_NCPFS_IOCTL_LOCKING=y
# CONFIG_NCPFS_STRONG is not setCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=yCONFIG_NCPFS_SMALLDOS=yCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not setCONFIG_AFS_FS=yCONFIG_AFS_DEBUG=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not setCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not setCONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=yCONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not setCONFIG_NLS_CODEPAGE_863=yCONFIG_NLS_CODEPAGE_864=yCONFIG_NLS_CODEPAGE_865=yCONFIG_NLS_CODEPAGE_866=yCONFIG_NLS_CODEPAGE_869=yCONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=yCONFIG_NLS_CODEPAGE_949=yCONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=yCONFIG_NLS_CODEPAGE_1251=yCONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not setCONFIG_NLS_ISO8859_2=yCONFIG_NLS_ISO8859_3=yCONFIG_NLS_ISO8859_4=yCONFIG_NLS_ISO8859_5=yCONFIG_NLS_ISO8859_6=yCONFIG_NLS_ISO8859_7=yCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=yCONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not setCONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=yCONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not setCONFIG_ALLOW_WARNINGS=yCONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=yCONFIG_HEADERS_CHECK=yCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=yCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1CONFIG_DETECT_HUNG_TASK=yCONFIG_BOOTPARAM_HUNG_TASK_PANIC=yCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not setCONFIG_DEBUG_OBJECTS_FREE=y
# CONFIG_DEBUG_OBJECTS_TIMERS is not setCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not setCONFIG_DEBUG_LOCKDEP=yCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=yCONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not setCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=yCONFIG_RCU_TORTURE_TEST=yCONFIG_RCU_TORTURE_TEST_RUNNABLE=yCONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not setCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=y
# CONFIG_FAIL_PAGE_ALLOC is not set
# CONFIG_FAIL_MAKE_REQUEST is not setCONFIG_FAIL_IO_TIMEOUT=y
# CONFIG_FAULT_INJECTION_DEBUG_FS is not setCONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_HW_BRANCH_TRACER=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_TRACING=y
#
# Tracers
#CONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not setCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_BOOT_TRACER=yCONFIG_TRACE_BRANCH_PROFILING=yCONFIG_PROFILE_ALL_BRANCHES=yCONFIG_TRACING_BRANCHES=yCONFIG_BRANCH_TRACER=yCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=y
# CONFIG_HW_BRANCH_TRACER is not setCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_FTRACE is not setCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=y
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not setCONFIG_FIREWIRE_OHCI_REMOTE_DMA=yCONFIG_BUILD_DOCSRC=yCONFIG_DYNAMIC_PRINTK_DEBUG=yCONFIG_SAMPLES=yCONFIG_SAMPLE_KOBJECT=yCONFIG_HAVE_ARCH_KGDB=yCONFIG_KGDB=yCONFIG_KGDB_SERIAL_CONSOLE=yCONFIG_KGDB_TESTS=yCONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not setCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not setCONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not setCONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not setCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=yCONFIG_IOMMU_DEBUG=yCONFIG_IOMMU_LEAK=yCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not setCONFIG_SECURITY=yCONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not setCONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0CONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=y
# CONFIG_CRYPTO_CRYPTD is not setCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=yCONFIG_CRYPTO_CTS=yCONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not setCONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not setCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=yCONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=yCONFIG_CRYPTO_CAMELLIA=yCONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=yCONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_X86_64 is not setCONFIG_CRYPTO_SEED=yCONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not setCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=yCONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not setCONFIG_HAVE_KVM=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=yCONFIG_KVM_INTEL=y
# CONFIG_KVM_AMD is not setCONFIG_KVM_TRACE=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_LZO_COMPRESS=yCONFIG_LZO_DECOMPRESS=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_CPUMASK_OFFSTACK=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_64=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
Quoted 7 lines · Ingo Molnar
Quoted 2 lines
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git
tj-percpuok, i pulled it into tip:core/percpu (one conflict resolution done - please double check it), and exposed it to -tip testing briefly.
Quoted 8 lines
Six x86 test-systems failed ;-) One of them had this panic:
Scan SMP from
ffff880000000000for 1024 bytes.
Scan SMP fromffff88000009fc00for 1024 bytes.
Scan SMP fromffff8800000f0000for 65536 bytes.
found SMP MP-table at [ffff8800000fe680] fe680
PANIC: early exception 0 rip : error cr2
PANIC: early exception 0 rip : error cr2
Ah, spoke too soon. Bisection gave this commit from Yinghai:
dc07da5: x86: check range in reserve_early()
Ingo
Quoted 17 lines · Ingo Molnar
Quoted 6 lines · Ingo Molnar
Quoted 2 lines
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git
tj-percpuok, i pulled it into tip:core/percpu (one conflict resolution done - please double check it), and exposed it to -tip testing briefly.
Quoted 8 lines
Six x86 test-systems failed ;-) One of them had this panic:
Scan SMP from
ffff880000000000for 1024 bytes.
Scan SMP fromffff88000009fc00for 1024 bytes.
Scan SMP fromffff8800000f0000for 65536 bytes.
found SMP MP-table at [ffff8800000fe680] fe680
PANIC: early exception 0 rip : error cr2
PANIC: early exception 0 rip : error cr2
Quoted 4 lines
Ah, spoke too soon. Bisection gave this commit from Yinghai:
dc07da5: x86: check range in
reserve_early()
arh...
should be
arch/x86/kernel/e820.c +3 -0
@@ -858,6 +858,9 @@ void __init reserve_early_overlap_ok(u64 start, u64 end, char *name)*/ void __init reserve_early (u64 start,u64 end,char *name) { +if (start >= end) +return ; +drop_overlaps_that_are_ok (start, end);__reserve_early (start, end, name,0 ); }
PATCH 1/1 x86: check range in reserve_early() -v2
In reply to Ingo MolnarImpact: cleanup
one 32-bit system reports:
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001c000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
DMI 2.0 present.last_pfn = 0x1c000 max_arch_pfn = 0x100000
kernel direct mapping tables up to 1c000000 @ 7000-c000 ..
RAMDISK: 1bc69000 - 1bfef4fa
..
0MB HIGHMEM available.
448MB LOWMEM available.
mapped low ram: 0 - 1c000000
low ram: 00000000 - 1c000000
bootmap 00002000 - 00005800
(9 early reservations) ==> bootmem [0000000000 - 001c000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 00009ed14c] TEXT DATA BSS ==> [0000400000 - 00009ed14c]
#4 [001bc69000 - 001bfef4fa] RAMDISK ==> [001bc69000 - 001bfef4fa]
#5 [00009ee000 - 00009f2000] INIT_PG_TABLE ==> [00009ee000 - 00009f2000]
#6 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#7 [0000007000 - 0000007000] PGTABLE
#8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
Notice the strange blank PGTABLE entry.
The reason is init_pg_table is big enough, and zero range is called with init_memory_mapping/reserve_early().
So try to check the range in reserve_early()
v2: fix the reversed compare
--- arch/x86/kernel/e820.c | 3 +++ 1 file changed, 3 insertions(+)
arch/x86/kernel/e820.c +3 -0
@@ -858,6 +858,9 @@ void __init reserve_early_overlap_ok(u64*/ void __init reserve_early (u64 start,u64 end,char *name) { +if (start >= end) +return ; +drop_overlaps_that_are_ok (start, end);__reserve_early (start, end, name,0 ); }
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git
tj-percpu
ok, but these seem to be genuinely yours.
one build failure:
arch/x86/kernel/setup_percpu.c: In function ‘setup_per_cpu_areas’:
arch/x86/kernel/setup_percpu.c:442: error: ‘ptr’ undeclared (first use in this function) arch/x86/kernel/setup_percpu.c:442: error: (Each undeclared identifier is reported only once arch/x86/kernel/setup_percpu.c:442: error: for each function it appears in.)
one new warning:
mm/percpu.c: In function ‘pcpu_map’:
mm/percpu.c:604: warning: unused variable ‘last’
and one tip:master merge impact due to API change:
kernel/trace/trace_functions_graph.c: In function ‘graph_trace_close’:
kernel/trace/trace_functions_graph.c:836: error: implicit declaration of function ‘percpu_free’
that's free_percpu() now, right?
Btw., why was this rename done? We generally standardize on hierarchical names, going from the more general to the more specific names, left to right. So we have <subsystem>_<functionality>_<subtype> sort of names generally.
Ingo
Tejun Heo
maintainerPATCH 1/2 x86, percpu: fix minor bugs in setup_percpu.c
Recent changes in setup_percpu.c made a now meaningless DBG() statement fail to compile and introduced a comparison-of-different-types warning. Fix them.
Compile failure is reported by Ingo Molnar.
--- arch/x86/kernel/setup_percpu.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
arch/x86/kernel/setup_percpu.c +1 -3
@@ -270,7 +270,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)/* allocate and copy */ pcpue_unit_size =PFN_ALIGN (static_size +PERCPU_DYNAMIC_RESERVE ); - pcpue_unit_size =max (pcpue_unit_size,PCPU_MIN_UNIT_SIZE ); + pcpue_unit_size =max_t (size_t, pcpue_unit_size,PCPU_MIN_UNIT_SIZE ); pcpue_ptr =pcpu_alloc_bootmem (0 ,num_possible_cpus () * pcpue_unit_size,PAGE_SIZE );if (!pcpue_ptr)
@@ -438,8 +438,6 @@ void __init setup_per_cpu_areas(void)*/ if (cpu == boot_cpu_id)switch_to_new_gdt (cpu); - -DBG ("PERCPU: cpu %4d %p\n" , cpu, ptr); }/* indicate the early static arrays will soon be gone */
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerPATCH 2/2 x86: convert cacheflush macros inline functions
In reply to Ingo MolnarImpact: cleanup
Unused macro parameters cause spurious unused variable warnings. Convert all cacheflush macros to inline functions to avoid the warnings and achieve better type checking.
--- arch/x86/include/asm/cacheflush.h | 53 +++++++++++++++++++++++++------------ 1 files changed, 36 insertions(+), 17 deletions(-)
arch/x86/include/asm/cacheflush.h +36 -17
@@ -5,24 +5,43 @@#include <linux/mm.h> /* Caches aren't brain-dead on the intel. */ -#define flush_cache_all () do { } while (0) -#define flush_cache_mm (mm) do { } while (0) -#define flush_cache_dup_mm (mm) do { } while (0) -#define flush_cache_range (vma, start, end) do { } while (0) -#define flush_cache_page (vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page (page) do { } while (0) -#define flush_dcache_mmap_lock (mapping) do { } while (0) -#define flush_dcache_mmap_unlock (mapping) do { } while (0) -#define flush_icache_range (start, end) do { } while (0) -#define flush_icache_page (vma, pg) do { } while (0) -#define flush_icache_user_range (vma, pg, adr, len) do { } while (0) -#define flush_cache_vmap (start, end) do { } while (0) -#define flush_cache_vunmap (start, end) do { } while (0) +static inline void flush_cache_all (void ) { } +static inline void flush_cache_mm (struct mm_struct *mm) { } +static inline void flush_cache_dup_mm (struct mm_struct *mm) { } +static inline void flush_cache_range (struct vm_area_struct *vma, +unsigned long start,unsigned long end) { } +static inline void flush_cache_page (struct vm_area_struct *vma, +unsigned long vmaddr,unsigned long pfn) { } +static inline void flush_dcache_page (struct page *page) { } +static inline void flush_dcache_mmap_lock (struct address_space *mapping) { } +static inline void flush_dcache_mmap_unlock (struct address_space *mapping) { } +static inline void flush_icache_range (unsigned long start, +unsigned long end) { } +static inline void flush_icache_page (struct vm_area_struct *vma, +struct page *page) { } +static inline void flush_icache_user_range (struct vm_area_struct *vma, +struct page *page, +unsigned long addr, +unsigned long len) { } +static inline void flush_cache_vmap (unsigned long start,unsigned long end) { } +static inline void flush_cache_vunmap (unsigned long start, +unsigned long end) { } -#define copy_to_user_page (vma, page, vaddr, dst, src, len) \ - memcpy((dst), (src), (len)) -#define copy_from_user_page (vma, page, vaddr, dst, src, len) \ - memcpy((dst), (src), (len)) +static inline void copy_to_user_page (struct vm_area_struct *vma, +struct page *page,unsigned long vaddr, +void *dst,const void *src, +unsigned long len) +{ +memcpy (dst, src, len); +} + +static inline void copy_from_user_page (struct vm_area_struct *vma, +struct page *page,unsigned long vaddr, +void *dst,const void *src, +unsigned long len) +{ +memcpy (dst, src, len); +}#define PG_non_WB PG_arch_1PAGEFLAG (NonWB, non_WB)
Signature · 1 line
1.6.0.2
Tejun Heo
maintainerHello, Ingo.
Patches posted to fix the build failure and warning. Patches are also available in the usual git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git tj-percpu
Quoted 11 lines · Ingo Molnar
and one tip:master merge impact due to API change:
kernel/trace/trace_functions_graph.c: In function ‘graph_trace_close’:
kernel/trace/trace_functions_graph.c:836: error: implicit declaration of function ‘percpu_free’that's
free_percpu()now, right?Btw., why was this rename done? We generally standardize on hierarchical names, going from the more general to the more specific names, left to right. So we have <subsystem>_<functionality>_<subtype> sort of names generally.
It's a strange story and not really a rename.
We had __percpu_alloc_mask(), percpu_alloc(), __alloc_percpu() and alloc_percpu() and of course matching frees. The percpu_*() stuff was introduced so that allocations can take online cpus into consideration. So, percpu_alloc() uses cpu_online_map as the default allocation mask while alloc_percpu() uses cpu_possible_map. The allocation mask thing never really took off and there virtually was no user and got killed.
If the only merge impact was percpu_free() and it's not missing percpu_alloc(), it could be that allocation path used alloc_percpu() but free path used percpu_free().
Thanks.
Signature · 1 line
tejun
Tejun Heo
maintainerQuoted 6 lines · Tejun Heo
Hello, Ingo.
Patches posted to fix the build failure and warning. Patches are also available in the usual git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.gittj-percpu
Hmm... kernel.org is slow today. It hasn't been mirrored yet. The commit ID is d325100504f1d0c296a1fbfef558deaa655e2240. If it doesn't show up please pull from master.kernel.org.
Thanks.
Signature · 1 line
tejun
Quoted 6 lines · Tejun Heo
Hello, Ingo.
Patches posted to fix the build failure and warning. Patches are also available in the usual git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.gittj-percpu
Pulled into tip:core/percpu, thanks Tejun!
Ingo
WARNING: at include/linux/percpu.h:159 __create_workqueue_key+0x1f6/0x220()
Quoted 11 lines · Ingo Molnar
Quoted 6 lines · Tejun Heo
Hello, Ingo.
Patches posted to fix the build failure and warning. Patches are also available in the usual git tree.
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.gittj-percpuPulled into tip:core/percpu, thanks Tejun!
beyond the two build fixes i committed, there's a new runtime warning as well:
[ 0.280001] ... jiffies result ok [ 0.284027] ------------[ cut here ]------------ [ 0.288002] WARNING: at include/linux/percpu.h:159 __create_workqueue_key+0x1f6/0x220() [ 0.292002] Hardware name: System Product Name [ 0.296003] Pid: 1, comm: swapper Not tainted 2.6.29-rc6-tip #27346 [ 0.300002] Call Trace: [ 0.304006] [<ffffffff80243b5c>] warn_slowpath+0xdc/0x100 [ 0.308004] [<ffffffff80292b76>] ? __alloc_pages_internal+0x146/0x490 [ 0.312005] [<ffffffff802b39ed>] ? check_bytes_and_report+0x3d/0xe0 [ 0.316003] [<ffffffff802b3aeb>] ? check_pad_bytes+0x5b/0x70 [ 0.320003] [<ffffffff802b4518>] ? check_object+0x98/0x230 [ 0.324004] [<ffffffff802b22f4>] ? init_object+0x54/0x90 [ 0.328004] [<ffffffff802b5c57>] ? __slab_alloc+0xe7/0x1d0 [ 0.332003] [<ffffffff80257665>] ? __create_workqueue_key+0x45/0x220 [ 0.336003] [<ffffffff80257665>] ? __create_workqueue_key+0x45/0x220 [ 0.340003] [<ffffffff80257816>] __create_workqueue_key+0x1f6/0x220 [ 0.344005] [<ffffffff81520140>] ? early_idt_handler+0x0/0x73 [ 0.348003] [<ffffffff81537d96>] init_workqueues+0x46/0x60 [ 0.352004] [<ffffffff815207d9>] do_basic_setup+0x9/0x30 [ 0.356003] [<ffffffff81520bbc>] kernel_init+0x4c/0x90 [ 0.360004] [<ffffffff80212a0a>] child_rip+0xa/0x20 [ 0.364004] [<ffffffff81520140>] ? early_idt_handler+0x0/0x73 [ 0.368003] [<ffffffff81520b70>] ? kernel_init+0x0/0x90 [ 0.372003] [<ffffffff80212a00>] ? child_rip+0x0/0x20 [ 0.376030] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.380236] device: 'platform': device_add [ 0.384228] khelper used greatest stack depth: 6232 bytes left [ 0.392044] bus: 'platform': registered
Config attached. System booted up fine otherwise.
Ingo
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.29-rc6
# Wed Feb 25 14:39:03 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=y CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_BOOT_ALLOWED4=y
# CONFIG_BROKEN_BOOT_ALLOWED3 is not setCONFIG_BROKEN_BOOT_EUROPE=yCONFIG_BROKEN_BOOT_TITAN=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not setCONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not setCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not setCONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not setCONFIG_LOG_BUF_SHIFT=20CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not setCONFIG_SYSFS_DEPRECATED=yCONFIG_SYSFS_DEPRECATED_V2=yCONFIG_RELAY=yCONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not setCONFIG_USER_NS=y
# CONFIG_PID_NS is not setCONFIG_NET_NS=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_COMPAT_BRK=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_ANON_INODES=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#
# CONFIG_PERF_COUNTERS is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not setCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_HAVE_OPROFILE=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0
# CONFIG_MODULES is not setCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
#
# Processor type and features
#CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not setCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not setCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=yCONFIG_X86_VSMP=yCONFIG_X86_UV=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_PARAVIRT_GUEST=yCONFIG_XEN=yCONFIG_XEN_MAX_DOMAIN_MEMORY=32CONFIG_XEN_DEBUG_FS=yCONFIG_KVM_CLOCK=y
# CONFIG_KVM_GUEST is not setCONFIG_PARAVIRT=yCONFIG_PARAVIRT_CLOCK=yCONFIG_PARAVIRT_DEBUG=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not setCONFIG_GENERIC_CPU=yCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=4096CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
# CONFIG_X86_PTRACE_BTS is not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=yCONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not setCONFIG_NR_CPUS=1CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not setCONFIG_X86_CPUID=yCONFIG_UP_WANTED_1=yCONFIG_UP_WANTED_2=yCONFIG_UP_WANTED=yCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_MEMORY_PROBE=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not setCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_UNEVICTABLE_LRU=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_X86_RESERVE_LOW_64K is not set
# CONFIG_MTRR is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not setCONFIG_CRASH_DUMP=yCONFIG_PHYSICAL_START=0x200000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x200000CONFIG_COMPAT_VDSO=yCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not setCONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not setCONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=yCONFIG_PCMCIA_DEBUG=yCONFIG_PCMCIA=yCONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not setCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=yCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not setCONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=yCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_NET=y
#
# Networking options
#CONFIG_COMPAT_NET_DEV_OPS=yCONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not setCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=yCONFIG_XFRM_SUB_POLICY=yCONFIG_XFRM_MIGRATE=yCONFIG_XFRM_STATISTICS=yCONFIG_NET_KEY=yCONFIG_NET_KEY_MIGRATE=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=yCONFIG_IP_PNP_RARP=yCONFIG_NET_IPIP=yCONFIG_NET_IPGRE=yCONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not setCONFIG_ARPD=yCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not setCONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not setCONFIG_INET_TUNNEL=yCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=yCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=yCONFIG_TCP_CONG_HTCP=y
# CONFIG_TCP_CONG_HSTCP is not setCONFIG_TCP_CONG_HYBLA=yCONFIG_TCP_CONG_VEGAS=yCONFIG_TCP_CONG_SCALABLE=y
# CONFIG_TCP_CONG_LP is not setCONFIG_TCP_CONG_VENO=y
# CONFIG_TCP_CONG_YEAH is not setCONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not setCONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=yCONFIG_NETFILTER_DEBUG=yCONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not setCONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not setCONFIG_NETFILTER_XTABLES=yCONFIG_NETFILTER_XT_TARGET_CLASSIFY=yCONFIG_NETFILTER_XT_TARGET_MARK=yCONFIG_NETFILTER_XT_TARGET_NFLOG=yCONFIG_NETFILTER_XT_TARGET_NFQUEUE=yCONFIG_NETFILTER_XT_TARGET_RATEEST=yCONFIG_NETFILTER_XT_TARGET_TCPMSS=yCONFIG_NETFILTER_XT_MATCH_COMMENT=y
# CONFIG_NETFILTER_XT_MATCH_DCCP is not setCONFIG_NETFILTER_XT_MATCH_DSCP=yCONFIG_NETFILTER_XT_MATCH_ESP=yCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=yCONFIG_NETFILTER_XT_MATCH_IPRANGE=yCONFIG_NETFILTER_XT_MATCH_LENGTH=yCONFIG_NETFILTER_XT_MATCH_LIMIT=yCONFIG_NETFILTER_XT_MATCH_MAC=yCONFIG_NETFILTER_XT_MATCH_MARK=yCONFIG_NETFILTER_XT_MATCH_MULTIPORT=yCONFIG_NETFILTER_XT_MATCH_OWNER=yCONFIG_NETFILTER_XT_MATCH_POLICY=yCONFIG_NETFILTER_XT_MATCH_PKTTYPE=yCONFIG_NETFILTER_XT_MATCH_QUOTA=yCONFIG_NETFILTER_XT_MATCH_RATEEST=yCONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not setCONFIG_NETFILTER_XT_MATCH_SCTP=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not setCONFIG_NETFILTER_XT_MATCH_STRING=y
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not setCONFIG_IP_VS=yCONFIG_IP_VS_DEBUG=yCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=y
# CONFIG_IP_VS_PROTO_ESP is not setCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not setCONFIG_IP_VS_LC=yCONFIG_IP_VS_WLC=yCONFIG_IP_VS_LBLC=yCONFIG_IP_VS_LBLCR=yCONFIG_IP_VS_DH=yCONFIG_IP_VS_SH=yCONFIG_IP_VS_SED=yCONFIG_IP_VS_NQ=y
#
# IPVS application helper
#CONFIG_IP_VS_FTP=y
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not setCONFIG_IP_NF_ARPTABLES=yCONFIG_IP_NF_ARPFILTER=yCONFIG_IP_NF_ARP_MANGLE=y
#
# DECnet: Netfilter Configuration
#
# CONFIG_DECNET_NF_GRABULATOR is not setCONFIG_IP_DCCP=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not setCONFIG_IP_DCCP_CCID3_RTO=100CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#CONFIG_IP_DCCP_DEBUG=yCONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not setCONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=yCONFIG_TIPC=yCONFIG_TIPC_ADVANCED=yCONFIG_TIPC_ZONES=3CONFIG_TIPC_CLUSTERS=1CONFIG_TIPC_NODES=255CONFIG_TIPC_SLAVE_NODES=0CONFIG_TIPC_PORTS=8191CONFIG_TIPC_LOG=0CONFIG_TIPC_DEBUG=y
# CONFIG_ATM is not setCONFIG_STP=yCONFIG_BRIDGE=yCONFIG_NET_DSA=yCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=yCONFIG_NET_DSA_TAG_TRAILER=yCONFIG_NET_DSA_MV88E6XXX=yCONFIG_NET_DSA_MV88E6060=yCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=yCONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not setCONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=y
# CONFIG_LLC2 is not setCONFIG_IPX=yCONFIG_IPX_INTERN=yCONFIG_ATALK=yCONFIG_DEV_APPLETALK=yCONFIG_IPDDP=yCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=yCONFIG_X25=yCONFIG_LAPB=yCONFIG_ECONET=yCONFIG_ECONET_AUNUDP=y
# CONFIG_ECONET_NATIVE is not set
# CONFIG_WAN_ROUTER is not setCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=yCONFIG_NET_SCH_HTB=yCONFIG_NET_SCH_HFSC=yCONFIG_NET_SCH_PRIO=yCONFIG_NET_SCH_MULTIQ=yCONFIG_NET_SCH_RED=yCONFIG_NET_SCH_SFQ=y
# CONFIG_NET_SCH_TEQL is not setCONFIG_NET_SCH_TBF=y
# CONFIG_NET_SCH_GRED is not setCONFIG_NET_SCH_DSMARK=yCONFIG_NET_SCH_NETEM=yCONFIG_NET_SCH_DRR=yCONFIG_NET_SCH_INGRESS=y
#
# Classification
#CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not setCONFIG_NET_CLS_TCINDEX=yCONFIG_NET_CLS_ROUTE4=yCONFIG_NET_CLS_ROUTE=y
# CONFIG_NET_CLS_FW is not setCONFIG_NET_CLS_U32=yCONFIG_CLS_U32_PERF=yCONFIG_CLS_U32_MARK=y
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not setCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=yCONFIG_NET_ACT_GACT=yCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not setCONFIG_NET_ACT_SIMP=y
# CONFIG_NET_ACT_SKBEDIT is not setCONFIG_NET_CLS_IND=yCONFIG_NET_SCH_FIFO=yCONFIG_DCB=y
#
# Network testing
#CONFIG_NET_PKTGEN=yCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
# CONFIG_CAN is not setCONFIG_IRDA=y
#
# IrDA protocols
#CONFIG_IRLAN=yCONFIG_IRNET=yCONFIG_IRCOMM=y
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=y
#
# Dongle support
#CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not setCONFIG_ACTISYS_DONGLE=yCONFIG_TEKRAM_DONGLE=yCONFIG_TOIM3232_DONGLE=yCONFIG_LITELINK_DONGLE=yCONFIG_MA600_DONGLE=yCONFIG_GIRBIL_DONGLE=yCONFIG_MCP2120_DONGLE=yCONFIG_OLD_BELKIN_DONGLE=yCONFIG_ACT200L_DONGLE=yCONFIG_KINGSUN_DONGLE=yCONFIG_KSDAZZLE_DONGLE=y
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not setCONFIG_SIGMATEL_FIR=yCONFIG_NSC_FIR=yCONFIG_WINBOND_FIR=yCONFIG_SMC_IRCC_FIR=yCONFIG_ALI_FIR=yCONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not setCONFIG_AF_RXRPC=yCONFIG_AF_RXRPC_DEBUG=yCONFIG_RXKAD=y
# CONFIG_PHONET is not setCONFIG_WIRELESS=yCONFIG_CFG80211=yCONFIG_CFG80211_REG_DEBUG=y
# CONFIG_NL80211 is not setCONFIG_WIRELESS_OLD_REGULATORY=yCONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not setCONFIG_LIB80211=yCONFIG_LIB80211_CRYPT_WEP=yCONFIG_LIB80211_CRYPT_CCMP=yCONFIG_LIB80211_CRYPT_TKIP=yCONFIG_MAC80211=y
#
# Rate control algorithm selection
#CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_WIMAX=yCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not setCONFIG_RFKILL_LEDS=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_PARPORT is not setCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=yCONFIG_BLK_CPQ_DA=yCONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not setCONFIG_BLK_DEV_DAC960=yCONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_CRYPTOLOOP=yCONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not setCONFIG_BLK_DEV_UB=yCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=4096CONFIG_BLK_DEV_XIP=yCONFIG_CDROM_PKTCDVD=yCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=yCONFIG_ATA_OVER_ETH=yCONFIG_XEN_BLKDEV_FRONTEND=y
# CONFIG_BLK_DEV_HD is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not setCONFIG_PHANTOM=yCONFIG_SGI_IOC4=yCONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not setCONFIG_ICS932S401=yCONFIG_ENCLOSURE_SERVICES=yCONFIG_HP_ILO=yCONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#CONFIG_EEPROM_AT24=yCONFIG_EEPROM_LEGACY=yCONFIG_EEPROM_93CX6=yCONFIG_HAVE_IDE=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not setCONFIG_CHR_DEV_OSST=yCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_ENCLOSURE is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not setCONFIG_SCSI_SAS_ATTRS=yCONFIG_SCSI_SRP_ATTRS=yCONFIG_SCSI_SRP_TGT_ATTRS=y
# CONFIG_SCSI_LOWLEVEL is not setCONFIG_SCSI_AIC7XXX=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not setCONFIG_SCSI_DH=yCONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not setCONFIG_SCSI_DH_ALUA=yCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_SATA_PMP=yCONFIG_SATA_AHCI=yCONFIG_SATA_SIL24=yCONFIG_ATA_SFF=yCONFIG_SATA_SVW=yCONFIG_ATA_PIIX=yCONFIG_SATA_MV=yCONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not setCONFIG_SATA_QSTOR=yCONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not setCONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not setCONFIG_SATA_ULI=yCONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not setCONFIG_SATA_INIC162X=yCONFIG_PATA_ALI=yCONFIG_PATA_AMD=yCONFIG_PATA_ARTOP=y
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not setCONFIG_PATA_CMD64X=y
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not setCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=yCONFIG_PATA_HPT37X=yCONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not setCONFIG_PATA_TRIFLEX=yCONFIG_PATA_MARVELL=yCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=yCONFIG_PATA_NETCELL=yCONFIG_PATA_NINJA32=yCONFIG_PATA_NS87410=yCONFIG_PATA_NS87415=yCONFIG_PATA_OPTI=y
# CONFIG_PATA_OPTIDMA is not setCONFIG_PATA_PCMCIA=yCONFIG_PATA_PDC_OLD=yCONFIG_PATA_RADISYS=yCONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not setCONFIG_PATA_WINBOND=yCONFIG_PATA_SCH=yCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not setCONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not setCONFIG_MD_RAID456=yCONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not setCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=y
# CONFIG_DM_SNAPSHOT is not setCONFIG_DM_MIRROR=yCONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not setCONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing #
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not setCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=yCONFIG_NETDEVICES=yCONFIG_IFB=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not setCONFIG_MACVLAN=yCONFIG_EQUALIZER=yCONFIG_TUN=y
# CONFIG_VETH is not setCONFIG_ARCNET=yCONFIG_ARCNET_1201=yCONFIG_ARCNET_1051=yCONFIG_ARCNET_RAW=y
# CONFIG_ARCNET_CAP is not set
# CONFIG_ARCNET_COM90xx is not set
# CONFIG_ARCNET_COM90xxIO is not setCONFIG_ARCNET_RIM_I=y
# CONFIG_ARCNET_COM20020 is not setCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=yCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set CONFIG_REALTEK_PHY=yCONFIG_NATIONAL_PHY=yCONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=y CONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=yCONFIG_MII=yCONFIG_HAPPYMEAL=yCONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set CONFIG_VORTEX=y
# CONFIG_NET_TULIP is not set CONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=yCONFIG_AMD8111_ETH=y CONFIG_ADAPTEC_STARFIRE=y
# CONFIG_B44 is not setCONFIG_FORCEDETH=yCONFIG_FORCEDETH_NAPI=yCONFIG_E100=yCONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set CONFIG_8139CP=yCONFIG_8139TOO=yCONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set CONFIG_R6040=yCONFIG_SIS900=y
# CONFIG_EPIC100 is not set CONFIG_SMSC9420=yCONFIG_SUNDANCE=y
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set CONFIG_SC92031=y
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=yCONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not setCONFIG_E1000=yCONFIG_E1000E=y
# CONFIG_IP1000 is not setCONFIG_IGB=yCONFIG_IGB_LRO=y
# CONFIG_IGB_DCA is not set CONFIG_NS83820=yCONFIG_HAMACHI=yCONFIG_YELLOWFIN=y
# CONFIG_R8169 is not setCONFIG_SIS190=y
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set CONFIG_VIA_VELOCITY=yCONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not setCONFIG_ATL1E=y
# CONFIG_ATL1C is not setCONFIG_JME=yCONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3_DEPENDS=y CONFIG_CHELSIO_T3=yCONFIG_ENIC=yCONFIG_IXGBE=yCONFIG_IXGBE_DCA=yCONFIG_IXGBE_DCB=y
# CONFIG_IXGB is not setCONFIG_S2IO=y
# CONFIG_MYRI10GE is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set CONFIG_TEHUTI=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not setCONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set CONFIG_TMS380TR=y
# CONFIG_TMSPCI is not setCONFIG_ABYSS=y
#
# Wireless LAN
#CONFIG_WLAN_PRE80211=y
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not setCONFIG_PCMCIA_NETWAVE=yCONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not setCONFIG_HERMES=yCONFIG_HERMES_CACHE_FW_ON_INIT=yCONFIG_PLX_HERMES=yCONFIG_TMD_HERMES=y
# CONFIG_NORTEL_HERMES is not setCONFIG_PCI_HERMES=y
# CONFIG_PCMCIA_HERMES is not setCONFIG_PCMCIA_SPECTRUM=yCONFIG_ATMEL=yCONFIG_PCI_ATMEL=y
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not setCONFIG_PRISM54=yCONFIG_USB_ZD1201=yCONFIG_USB_NET_RNDIS_WLAN=yCONFIG_RTL8180=yCONFIG_RTL8187=yCONFIG_ADM8211=yCONFIG_MAC80211_HWSIM=y
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not setCONFIG_ATH9K=yCONFIG_ATH9K_DEBUG=yCONFIG_IPW2100=yCONFIG_IPW2100_MONITOR=yCONFIG_IPW2100_DEBUG=yCONFIG_IPW2200=yCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=y
# CONFIG_IPW2200_PROMISCUOUS is not setCONFIG_IPW2200_QOS=yCONFIG_IPW2200_DEBUG=yCONFIG_LIBIPW=yCONFIG_LIBIPW_DEBUG=yCONFIG_IWLWIFI=yCONFIG_IWLCORE=yCONFIG_IWLWIFI_LEDS=yCONFIG_IWLWIFI_RFKILL=yCONFIG_IWLWIFI_DEBUG=yCONFIG_IWLAGN=y
# CONFIG_IWLAGN_SPECTRUM_MEASUREMENT is not setCONFIG_IWLAGN_LEDS=yCONFIG_IWL4965=yCONFIG_IWL5000=y
# CONFIG_IWL3945 is not setCONFIG_HOSTAP=y
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not setCONFIG_HOSTAP_PCI=yCONFIG_HOSTAP_CS=yCONFIG_B43=yCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not setCONFIG_B43_LEDS=y
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=yCONFIG_WIMAX_I2400M_SDIO=yCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not setCONFIG_USB_KAWETH=y
# CONFIG_USB_PEGASUS is not setCONFIG_USB_RTL8150=yCONFIG_USB_USBNET=yCONFIG_USB_NET_AX8817X=yCONFIG_USB_NET_CDCETHER=yCONFIG_USB_NET_DM9601=yCONFIG_USB_NET_SMSC95XX=yCONFIG_USB_NET_GL620A=yCONFIG_USB_NET_NET1080=yCONFIG_USB_NET_PLUSB=yCONFIG_USB_NET_MCS7830=yCONFIG_USB_NET_RNDIS_HOST=yCONFIG_USB_NET_CDC_SUBSET=yCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=y
# CONFIG_USB_BELKIN is not setCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=yCONFIG_USB_HSO=y
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_FDDI is not setCONFIG_HIPPI=y
# CONFIG_ROADRUNNER is not setCONFIG_PPP=yCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=yCONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not setCONFIG_PPP_BSDCOMP=yCONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not setCONFIG_PPPOL2TP=yCONFIG_SLIP=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not setCONFIG_NET_FC=yCONFIG_NETCONSOLE=yCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_ISDN=yCONFIG_ISDN_I4L=yCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=y
# CONFIG_ISDN_MPP is not setCONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
# CONFIG_ISDN_AUDIO is not set
# CONFIG_ISDN_X25 is not set
#
# ISDN feature submodules
#CONFIG_ISDN_DRV_LOOP=yCONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_ISDN_CAPI is not setCONFIG_PHONE=y
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=yCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=yCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=yCONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_KEYBOARD_NEWTON=yCONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not setCONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not setCONFIG_JOYSTICK_A3D=yCONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not setCONFIG_JOYSTICK_GF2K=y
# CONFIG_JOYSTICK_GRIP is not setCONFIG_JOYSTICK_GRIP_MP=yCONFIG_JOYSTICK_GUILLEMOT=yCONFIG_JOYSTICK_INTERACT=yCONFIG_JOYSTICK_SIDEWINDER=yCONFIG_JOYSTICK_TMDC=yCONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not setCONFIG_JOYSTICK_WARRIOR=yCONFIG_JOYSTICK_MAGELLAN=yCONFIG_JOYSTICK_SPACEORB=yCONFIG_JOYSTICK_SPACEBALL=yCONFIG_JOYSTICK_STINGER=yCONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not setCONFIG_JOYSTICK_XPAD=yCONFIG_JOYSTICK_XPAD_FF=yCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not setCONFIG_TABLET_USB_KBTAB=yCONFIG_TABLET_USB_WACOM=yCONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_DA9034 is not setCONFIG_TOUCHSCREEN_FUJITSU=yCONFIG_TOUCHSCREEN_GUNZE=yCONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not setCONFIG_TOUCHSCREEN_INEXIO=yCONFIG_TOUCHSCREEN_MK712=yCONFIG_TOUCHSCREEN_PENMOUNT=y
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not setCONFIG_TOUCHSCREEN_TOUCHWIN=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=yCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_TOUCHIT213=yCONFIG_TOUCHSCREEN_TSC2007=yCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=yCONFIG_INPUT_APANEL=yCONFIG_INPUT_ATI_REMOTE=y
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not setCONFIG_INPUT_YEALINK=yCONFIG_INPUT_CM109=yCONFIG_INPUT_UINPUT=yCONFIG_INPUT_PCF50633_PMU=y
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=yCONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=yCONFIG_GAMEPORT=yCONFIG_GAMEPORT_NS558=yCONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not setCONFIG_GAMEPORT_FM801=y
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_DEVKMEM=yCONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not setCONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not setCONFIG_MOXA_INTELLIO=yCONFIG_MOXA_SMARTIO=yCONFIG_ISI=yCONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not setCONFIG_SYNCLINK_GT=yCONFIG_N_HDLC=y
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not setCONFIG_SX=yCONFIG_RIO=yCONFIG_RIO_OLDPCI=y
# CONFIG_STALDRV is not setCONFIG_NOZOMI=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_CS=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=yCONFIG_SERIAL_8250_DETECT_IRQ=yCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not setCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not setCONFIG_NVRAM=y
# CONFIG_R3964 is not setCONFIG_APPLICOM=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not setCONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not setCONFIG_IPWIRELESS=y
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=yCONFIG_NSC_GPIO=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not setCONFIG_TELCLOCK=yCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=yCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=yCONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not setCONFIG_I2C_ALI1563=yCONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not setCONFIG_I2C_AMD8111=yCONFIG_I2C_I801=yCONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_NFORCE2=yCONFIG_I2C_SIS5595=yCONFIG_I2C_SIS630=yCONFIG_I2C_SIS96X=yCONFIG_I2C_VIA=yCONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_OCORES=yCONFIG_I2C_SIMTEC=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not setCONFIG_I2C_TAOS_EVM=y
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not setCONFIG_PCF8575=yCONFIG_SENSORS_PCA9539=yCONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not setCONFIG_I2C_DEBUG_CORE=yCONFIG_I2C_DEBUG_ALGO=yCONFIG_I2C_DEBUG_BUS=yCONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not setCONFIG_W1=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=yCONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not setCONFIG_W1_SLAVE_DS2760=yCONFIG_W1_SLAVE_BQ27000=y
# CONFIG_POWER_SUPPLY is not setCONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not setCONFIG_SENSORS_AD7414=yCONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not setCONFIG_SENSORS_ADM1025=yCONFIG_SENSORS_ADM1026=yCONFIG_SENSORS_ADM1029=yCONFIG_SENSORS_ADM1031=yCONFIG_SENSORS_ADM9240=yCONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not setCONFIG_SENSORS_ADT7473=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not setCONFIG_SENSORS_ASB100=yCONFIG_SENSORS_ATXP1=y
# CONFIG_SENSORS_DS1621 is not setCONFIG_SENSORS_I5K_AMB=yCONFIG_SENSORS_F71805F=yCONFIG_SENSORS_F71882FG=yCONFIG_SENSORS_F75375S=yCONFIG_SENSORS_FSCHER=y
# CONFIG_SENSORS_FSCPOS is not setCONFIG_SENSORS_FSCHMD=yCONFIG_SENSORS_GL518SM=y
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not setCONFIG_SENSORS_IT87=yCONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not setCONFIG_SENSORS_LM78=yCONFIG_SENSORS_LM80=yCONFIG_SENSORS_LM83=yCONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LTC4245 is not setCONFIG_SENSORS_MAX1619=yCONFIG_SENSORS_MAX6650=yCONFIG_SENSORS_PC87360=yCONFIG_SENSORS_PC87427=yCONFIG_SENSORS_SIS5595=yCONFIG_SENSORS_DME1737=yCONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not setCONFIG_SENSORS_SMSC47B397=yCONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_THMC50 is not setCONFIG_SENSORS_VIA686A=yCONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not setCONFIG_SENSORS_W83781D=yCONFIG_SENSORS_W83791D=yCONFIG_SENSORS_W83792D=yCONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not setCONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_HDAPS is not setCONFIG_SENSORS_APPLESMC=yCONFIG_HWMON_DEBUG_CHIP=yCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=yCONFIG_SSB_SPROM=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not setCONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not setCONFIG_PMIC_DA903X=y
# CONFIG_MFD_WM8400 is not setCONFIG_MFD_PCF50633=yCONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not setCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not setCONFIG_REGULATOR_VIRTUAL_CONSUMER=yCONFIG_REGULATOR_BQ24022=yCONFIG_REGULATOR_DA903X=yCONFIG_REGULATOR_PCF50633=y
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not setCONFIG_AGP_SIS=y
# CONFIG_AGP_VIA is not setCONFIG_DRM=yCONFIG_DRM_TDFX=yCONFIG_DRM_R128=yCONFIG_DRM_RADEON=yCONFIG_DRM_MGA=yCONFIG_DRM_SIS=y
# CONFIG_DRM_VIA is not setCONFIG_DRM_SAVAGE=yCONFIG_VGASTATE=yCONFIG_VIDEO_OUTPUT_CONTROL=yCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not setCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not setCONFIG_FB_SYS_FILLRECT=yCONFIG_FB_SYS_COPYAREA=yCONFIG_FB_SYS_IMAGEBLIT=yCONFIG_FB_FOREIGN_ENDIAN=yCONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not setCONFIG_FB_SYS_FOPS=yCONFIG_FB_DEFERRED_IO=yCONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#CONFIG_FB_PM2=yCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=y
# CONFIG_FB_ARC is not setCONFIG_FB_IMSTT=y
# CONFIG_FB_N411 is not setCONFIG_FB_HGA=yCONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not setCONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not setCONFIG_FB_NVIDIA_DEBUG=y
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
# CONFIG_FB_RIVA is not setCONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not setCONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not setCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not setCONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not setCONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not setCONFIG_FB_3DFX=yCONFIG_FB_3DFX_ACCEL=yCONFIG_FB_VOODOO1=y
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not setCONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_XEN_FBDEV_FRONTEND is not setCONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_ILI9320 is not setCONFIG_LCD_PLATFORM=yCONFIG_BACKLIGHT_CLASS_DEVICE=yCONFIG_BACKLIGHT_GENERIC=yCONFIG_BACKLIGHT_PROGEAR=yCONFIG_BACKLIGHT_CARILLO_RANCH=yCONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not setCONFIG_BACKLIGHT_SAHARA=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_DUMMY_CONSOLE=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not setCONFIG_SOUND=yCONFIG_SOUND_OSS_CORE=y
# CONFIG_SND is not setCONFIG_SOUND_PRIME=yCONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not setCONFIG_SOUND_DMAP=yCONFIG_SOUND_SSCAPE=yCONFIG_SOUND_VMIDI=yCONFIG_SOUND_TRIX=yCONFIG_SOUND_MSS=yCONFIG_SOUND_MPU401=y
# CONFIG_SOUND_PAS is not setCONFIG_SOUND_PSS=yCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=yCONFIG_SOUND_YM3812=yCONFIG_SOUND_UART6850=yCONFIG_SOUND_AEDSP16=y
# CONFIG_SC6600 is not set
# CONFIG_SOUND_KAHLUA is not setCONFIG_HID_SUPPORT=yCONFIG_HID=yCONFIG_HID_DEBUG=yCONFIG_HIDRAW=y
#
# USB Input Devices
#CONFIG_USB_HID=y
# CONFIG_HID_PID is not setCONFIG_USB_HIDDEV=yCONFIG_USB_MOUSE=y
#
# Special HID drivers
#CONFIG_HID_COMPAT=yCONFIG_HID_A4TECH=yCONFIG_HID_APPLE=yCONFIG_HID_BELKIN=yCONFIG_HID_CHERRY=yCONFIG_HID_CHICONY=yCONFIG_HID_CYPRESS=yCONFIG_HID_EZKEY=yCONFIG_HID_GYRATION=yCONFIG_HID_LOGITECH=yCONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not setCONFIG_HID_MICROSOFT=yCONFIG_HID_MONTEREY=yCONFIG_HID_NTRIG=yCONFIG_HID_PANTHERLORD=yCONFIG_PANTHERLORD_FF=yCONFIG_HID_PETALYNX=yCONFIG_HID_SAMSUNG=yCONFIG_HID_SONY=yCONFIG_HID_SUNPLUS=yCONFIG_GREENASIA_FF=yCONFIG_HID_TOPSEED=yCONFIG_THRUSTMASTER_FF=yCONFIG_ZEROPLUS_FF=yCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=yCONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not setCONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not setCONFIG_USB_MON=y
# CONFIG_USB_WUSB is not setCONFIG_USB_WUSB_CBAF=yCONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#CONFIG_USB_C67X00_HCD=yCONFIG_USB_EHCI_HCD=yCONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not setCONFIG_USB_OXU210HP_HCD=yCONFIG_USB_ISP116X_HCD=yCONFIG_USB_ISP1760_HCD=yCONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=yCONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_CS is not setCONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#CONFIG_USB_ACM=yCONFIG_USB_PRINTER=yCONFIG_USB_WDM=y
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; #
#
# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set CONFIG_USB_STORAGE_USBAT=y # CONFIG_USB_STORAGE_SDDR09 is not set CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not setCONFIG_USB_MICROTEK=y
#
# USB port drivers
#CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not setCONFIG_USB_EZUSB=yCONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not setCONFIG_USB_SERIAL_ARK3116=yCONFIG_USB_SERIAL_BELKIN=yCONFIG_USB_SERIAL_CH341=yCONFIG_USB_SERIAL_WHITEHEAT=y
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not setCONFIG_USB_SERIAL_CYPRESS_M8=yCONFIG_USB_SERIAL_EMPEG=yCONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_FUNSOFT is not setCONFIG_USB_SERIAL_VISOR=yCONFIG_USB_SERIAL_IPAQ=yCONFIG_USB_SERIAL_IR=yCONFIG_USB_SERIAL_EDGEPORT=y
# CONFIG_USB_SERIAL_EDGEPORT_TI is not setCONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not setCONFIG_USB_SERIAL_KEYSPAN_PDA=yCONFIG_USB_SERIAL_KEYSPAN=y
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not setCONFIG_USB_SERIAL_KEYSPAN_USA28=yCONFIG_USB_SERIAL_KEYSPAN_USA28X=yCONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not setCONFIG_USB_SERIAL_KEYSPAN_USA18X=yCONFIG_USB_SERIAL_KEYSPAN_USA19W=yCONFIG_USB_SERIAL_KEYSPAN_USA19QW=yCONFIG_USB_SERIAL_KEYSPAN_USA19QI=yCONFIG_USB_SERIAL_KEYSPAN_USA49W=yCONFIG_USB_SERIAL_KEYSPAN_USA49WLC=yCONFIG_USB_SERIAL_KLSI=yCONFIG_USB_SERIAL_KOBIL_SCT=yCONFIG_USB_SERIAL_MCT_U232=yCONFIG_USB_SERIAL_MOS7720=yCONFIG_USB_SERIAL_MOS7840=y
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not setCONFIG_USB_SERIAL_PL2303=yCONFIG_USB_SERIAL_OTI6858=yCONFIG_USB_SERIAL_SPCP8X5=y
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=yCONFIG_USB_SERIAL_CYBERJACK=yCONFIG_USB_SERIAL_XIRCOM=y
# CONFIG_USB_SERIAL_OPTION is not setCONFIG_USB_SERIAL_OMNINET=yCONFIG_USB_SERIAL_OPTICON=yCONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=y
# CONFIG_USB_EMI26 is not setCONFIG_USB_ADUTUX=yCONFIG_USB_SEVSEG=yCONFIG_USB_RIO500=yCONFIG_USB_LEGOTOWER=yCONFIG_USB_LCD=yCONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not setCONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not setCONFIG_USB_PHIDGET=y
# CONFIG_USB_PHIDGETKIT is not setCONFIG_USB_PHIDGETMOTORCONTROL=yCONFIG_USB_PHIDGETSERVO=yCONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not setCONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not setCONFIG_USB_LD=yCONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not setCONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not setCONFIG_USB_VST=y
#
# OTG and related infrastructure
#
# CONFIG_UWB is not setCONFIG_MMC=yCONFIG_MMC_DEBUG=yCONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not setCONFIG_SDIO_UART=yCONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not setCONFIG_MMC_WBSD=yCONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_SDRICOH_CS is not setCONFIG_MEMSTICK=yCONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not setCONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not setCONFIG_MEMSTICK_JMICRON_38X=yCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not setCONFIG_LEDS_PCA9532=yCONFIG_LEDS_CLEVO_MAIL=yCONFIG_LEDS_PCA955X=yCONFIG_LEDS_DA903X=y
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not setCONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not setCONFIG_ACCESSIBILITY=yCONFIG_A11Y_BRAILLE_CONSOLE=yCONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=yCONFIG_EDAC_E752X=yCONFIG_EDAC_I82975X=yCONFIG_EDAC_I3000=yCONFIG_EDAC_X38=yCONFIG_EDAC_I5400=y
# CONFIG_EDAC_I5000 is not setCONFIG_EDAC_I5100=yCONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not setCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not setCONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not setCONFIG_RTC_DRV_DS1374=yCONFIG_RTC_DRV_DS1672=y
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not setCONFIG_RTC_DRV_ISL1208=yCONFIG_RTC_DRV_X1205=yCONFIG_RTC_DRV_PCF8563=yCONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not setCONFIG_RTC_DRV_FM3130=yCONFIG_RTC_DRV_RX8581=y
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not setCONFIG_RTC_DRV_DS1553=yCONFIG_RTC_DRV_DS1742=yCONFIG_RTC_DRV_STK17TA8=yCONFIG_RTC_DRV_M48T86=yCONFIG_RTC_DRV_M48T35=yCONFIG_RTC_DRV_M48T59=yCONFIG_RTC_DRV_BQ4802=yCONFIG_RTC_DRV_V3020=yCONFIG_RTC_DRV_PCF50633=y
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=yCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=yCONFIG_DMATEST=yCONFIG_DCA=y
# CONFIG_UIO is not setCONFIG_XEN_BALLOON=yCONFIG_XEN_SCRUB_PAGES=y
# CONFIG_XENFS is not setCONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#CONFIG_EDD=yCONFIG_EDD_OFF=yCONFIG_FIRMWARE_MEMMAP=yCONFIG_DELL_RBU=yCONFIG_DCDBAS=yCONFIG_DMIID=yCONFIG_ISCSI_IBFT_FIND=y
# CONFIG_ISCSI_IBFT is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=yCONFIG_EXT2_FS_XIP=yCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=yCONFIG_EXT4DEV_COMPAT=yCONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not setCONFIG_FS_XIP=yCONFIG_JBD=yCONFIG_JBD_DEBUG=yCONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=yCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not setCONFIG_OCFS2_FS=y
# CONFIG_OCFS2_FS_O2CB is not setCONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not setCONFIG_OCFS2_DEBUG_FS=yCONFIG_OCFS2_FS_POSIX_ACL=yCONFIG_BTRFS_FS=yCONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not setCONFIG_QUOTA=yCONFIG_QUOTA_NETLINK_INTERFACE=yCONFIG_PRINT_QUOTA_WARNING=yCONFIG_QUOTA_TREE=yCONFIG_QFMT_V1=y
# CONFIG_QFMT_V2 is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=yCONFIG_AUTOFS4_FS=yCONFIG_FUSE_FS=yCONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=yCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not setCONFIG_NTFS_FS=yCONFIG_NTFS_DEBUG=yCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not setCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not setCONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not setCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=yCONFIG_NFS_COMMON=yCONFIG_SUNRPC=yCONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_REGISTER_V4 is not setCONFIG_RPCSEC_GSS_KRB5=yCONFIG_RPCSEC_GSS_SPKM3=yCONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=yCONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not setCONFIG_CIFS_WEAK_PW_HASH=yCONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not setCONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not setCONFIG_CODA_FS=y
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not setCONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not setCONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not setCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=yCONFIG_NLS_CODEPAGE_737=yCONFIG_NLS_CODEPAGE_775=yCONFIG_NLS_CODEPAGE_850=yCONFIG_NLS_CODEPAGE_852=yCONFIG_NLS_CODEPAGE_855=yCONFIG_NLS_CODEPAGE_857=yCONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not setCONFIG_NLS_CODEPAGE_862=yCONFIG_NLS_CODEPAGE_863=y
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not setCONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not setCONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=yCONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not setCONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not setCONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not setCONFIG_NLS_ISO8859_9=yCONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=yCONFIG_NLS_KOI8_R=yCONFIG_NLS_KOI8_U=y
# CONFIG_NLS_UTF8 is not setCONFIG_DLM=yCONFIG_DLM_DEBUG=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ALLOW_WARNINGS=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=yCONFIG_UNUSED_SYMBOLS=yCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_SECTION_MISMATCH=yCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not setCONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not setCONFIG_DEBUG_OBJECTS=yCONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not setCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=yCONFIG_SLUB_STATS=yCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not setCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=yCONFIG_DEBUG_LOCKDEP=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_DEBUG_LOCKING_API_SELFTESTS=yCONFIG_STACKTRACE=yCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_VM=yCONFIG_DEBUG_VIRTUAL=yCONFIG_DEBUG_WRITECOUNT=yCONFIG_DEBUG_MEMORY_INIT=yCONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not setCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=yCONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_DETECTOR=yCONFIG_BACKTRACE_SELF_TEST=yCONFIG_FAULT_INJECTION=yCONFIG_FAILSLAB=yCONFIG_FAIL_PAGE_ALLOC=yCONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not setCONFIG_LATENCYTOP=yCONFIG_SYSCTL_SYSCALL_CHECK=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_RING_BUFFER=yCONFIG_TRACING=y
#
# Tracers
#CONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not setCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_EVENT_TRACER=yCONFIG_BOOT_TRACER=yCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_FTRACE is not setCONFIG_FTRACE_SELFTEST=yCONFIG_FTRACE_STARTUP_TEST=yCONFIG_MMIOTRACE=yCONFIG_PROVIDE_OHCI1394_DMA_INIT=yCONFIG_DYNAMIC_PRINTK_DEBUG=y
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_STRICT_DEVMEM=yCONFIG_X86_VERBOSE_BOOTUP=yCONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not setCONFIG_DEBUG_STACK_USAGE=yCONFIG_DEBUG_PAGEALLOC=yCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=yCONFIG_DEBUG_RODATA_TEST=y
# CONFIG_IOMMU_DEBUG is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not setCONFIG_CPA_DEBUG=yCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#CONFIG_KEYS=yCONFIG_KEYS_DEBUG_PROC_KEYS=yCONFIG_SECURITY=yCONFIG_SECURITYFS=yCONFIG_SECURITY_NETWORK=yCONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not setCONFIG_SECURITY_FILE_CAPABILITIES=yCONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0CONFIG_XOR_BLOCKS=yCONFIG_ASYNC_CORE=yCONFIG_ASYNC_MEMCPY=yCONFIG_ASYNC_XOR=yCONFIG_CRYPTO=y
#
# Crypto core or helper
#CONFIG_CRYPTO_FIPS=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_ALGAPI2=yCONFIG_CRYPTO_AEAD=yCONFIG_CRYPTO_AEAD2=yCONFIG_CRYPTO_BLKCIPHER=yCONFIG_CRYPTO_BLKCIPHER2=yCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_HASH2=yCONFIG_CRYPTO_RNG=yCONFIG_CRYPTO_RNG2=yCONFIG_CRYPTO_MANAGER=yCONFIG_CRYPTO_MANAGER2=yCONFIG_CRYPTO_GF128MUL=yCONFIG_CRYPTO_NULL=yCONFIG_CRYPTO_CRYPTD=yCONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#CONFIG_CRYPTO_CCM=yCONFIG_CRYPTO_GCM=yCONFIG_CRYPTO_SEQIV=y
#
# Block modes
#CONFIG_CRYPTO_CBC=yCONFIG_CRYPTO_CTR=y
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=yCONFIG_CRYPTO_LRW=yCONFIG_CRYPTO_PCBC=yCONFIG_CRYPTO_XTS=y
#
# Hash modes
#CONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_XCBC=y
#
# Digest
#CONFIG_CRYPTO_CRC32C=yCONFIG_CRYPTO_CRC32C_INTEL=yCONFIG_CRYPTO_MD4=yCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not setCONFIG_CRYPTO_RMD160=yCONFIG_CRYPTO_RMD256=yCONFIG_CRYPTO_RMD320=yCONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not setCONFIG_CRYPTO_SHA512=yCONFIG_CRYPTO_TGR192=yCONFIG_CRYPTO_WP512=y
#
# Ciphers
#CONFIG_CRYPTO_AES=yCONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=yCONFIG_CRYPTO_BLOWFISH=y
# CONFIG_CRYPTO_CAMELLIA is not setCONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=yCONFIG_CRYPTO_FCRYPT=yCONFIG_CRYPTO_KHAZAD=yCONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_X86_64 is not setCONFIG_CRYPTO_SEED=yCONFIG_CRYPTO_SERPENT=yCONFIG_CRYPTO_TEA=yCONFIG_CRYPTO_TWOFISH=yCONFIG_CRYPTO_TWOFISH_COMMON=yCONFIG_CRYPTO_TWOFISH_X86_64=y
#
# Compression
#CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=yCONFIG_CRYPTO_DEV_HIFN_795X=yCONFIG_CRYPTO_DEV_HIFN_795X_RNG=yCONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=yCONFIG_CRC16=yCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=yCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=yCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=yCONFIG_TEXTSEARCH_BM=yCONFIG_TEXTSEARCH_FSM=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_CHECK_SIGNATURE=yCONFIG_FORCE_SUCCESSFUL_BUILD=yCONFIG_FORCE_MINIMAL_CONFIG=yCONFIG_FORCE_MINIMAL_CONFIG_64=yCONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
Tejun Heo
maintainerPATCH 1/1 percpu: fix too low alignment restriction on UP
UP __alloc_percpu() triggered WARN_ON_ONCE() if the requested alignment is larger than that of unsigned long long, which is too small for all the cacheline aligned allocations. Bump it up to SMP_CACHE_BYTES which kmalloc allocations generally guarantee.
---
Hello, Ingo.
I somehow completely forgot about testing UP. Sorry about that. :-) The following patch should do it. Also available in the #tj-percpu tree.
Thanks.
include/linux/percpu.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
include/linux/percpu.h +1 -1
@@ -156,7 +156,7 @@ static inline void *__alloc_percpu(size_t size, size_t align)* on it. Larger alignment should only be used for module * percpu sections on SMP for which this path isn't used. */ -WARN_ON_ONCE (align > __alignof__(unsigned long long )); +WARN_ON_ONCE (align >SMP_CACHE_BYTES );return kzalloc (size,GFP_KERNEL ); }
Signature · 1 line
1.6.0.2
Re: [PATCH core/percpu] percpu: fix too low alignment restriction on UP
Quoted 5 lines · Tejun Heo
UP
__alloc_percpu()triggeredWARN_ON_ONCE()if the requested alignment is larger than that of unsigned long long, which is too small for all the cacheline aligned allocations. Bump it up toSMP_CACHE_BYTESwhich kmalloc allocations generally guarantee.
Quoted 8 lines
Signed-off-by Tejun Heo <[email protected]>Reported-by Ingo Molnar <[email protected]>---
Hello, Ingo.I somehow completely forgot about testing UP. Sorry about that. :-) The following patch should do it. Also available in the #tj-percpu tree.
Pulled into tip:core/percpu, thanks Tejun!
Ingo
Quoted 8 lines · On Wednesday 25 February 2009 07:46:59 Ingo Molnar wrote:
kernel/trace/trace_functions_graph.c: In function ‘graph_trace_close’:
kernel/trace/trace_functions_graph.c:836: error: implicit declaration of function ‘percpu_free’that's
free_percpu()now, right?Btw., why was this rename done? We generally standardize on hierarchical names, going from the more general to the more specific names, left to right.
Agreed, but we had both, doing identical things, and free_percpu outnumbered percpu_free by a significant factor (about 40 to 5 IIRC).
Simple pragmatism, and it matches alloc_percpu.
Rusty.
Quoted 6 lines · Rusty Russell
Quoted 5 lines · On Wednesday 25 February 2009 07:46:59 Ingo Molnar wrote:
kernel/trace/trace_functions_graph.c: In function ‘graph_trace_close’:
kernel/trace/trace_functions_graph.c:836: error: implicit declaration of function ‘percpu_free’that's
free_percpu()now, right?
Quoted 7 lines
Quoted 3 lines
Btw., why was this rename done? We generally standardize on hierarchical names, going from the more general to the more specific names, left to right.
Agreed, but we had both, doing identical things, and
free_percpuoutnumberedpercpu_freeby a significant factor (about 40 to 5 IIRC).
40 places to rename => peanuts! :-)
Quoted 1 line
Simple pragmatism, and it matches
alloc_percpu.
it also matches other allocator mis-namings in mm/*.c. I concur.
Ingo