Add unwind information for SPE registers of E500 core
PATCH 1/1 Add unwind information for SPE registers of E500 core
SPE registers use the high part bit0~bit31 of E500 GPR0~GPR31. The unwind information in "eh_frame" section is used during exception handling and describes register information in the signal frame. But current unwind information doesn't cover SPE registers, which have been saved in the signal frame. This patch adds this unwind information to "eh_frame" section.
SPE registers use register number 1200+N to identify register 'N', but they start from 113 in unwind column, which is computed from gcc source code, macro DWARF_REG_TO_UNWIND_COLUMN:
#define FIRST_PSEUDO_REGISTER 114 #define DWARF_REG_TO_UNWIND_COLUMN(r) \
((r) > 1200 ? ((r) - 1200 + FIRST_PSEUDO_REGISTER - 1) : (r))
--- arch/powerpc/kernel/vdso32/sigtramp.S | 34 +++++++++++++++++++++++++++++++++ 1 files changed, 34 insertions(+), 0 deletions(-)
arch/powerpc/kernel/vdso32/sigtramp.S +34 -0
@@ -251,6 +251,40 @@ V_FUNCTION_END(__kernel_sigtramp_rt32) vsave_msr1 (31); \ vsave_msr2 (33, 32*16+12); \ vsave (32, 32*16) +#elif defined(CONFIG_SPE) +#define EH_FRAME_VMX \ + rsave (113, VREGS); \ + rsave (114, VREGS + 1*4); \ + rsave (115, VREGS + 2*4); \ + rsave (116, VREGS + 3*4); \ + rsave (117, VREGS + 4*4); \ + rsave (118, VREGS + 5*4); \ + rsave (119, VREGS + 6*4); \ + rsave (120, VREGS + 7*4); \ + rsave (121, VREGS + 8*4); \ + rsave (122, VREGS + 9*4); \ + rsave (123, VREGS + 10*4); \ + rsave (124, VREGS + 11*4); \ + rsave (125, VREGS + 12*4); \ + rsave (126, VREGS + 13*4); \ + rsave (127, VREGS + 14*4); \ + rsave (128, VREGS + 15*4); \ + rsave (129, VREGS + 16*4); \ + rsave (130, VREGS + 17*4); \ + rsave (131, VREGS + 18*4); \ + rsave (132, VREGS + 19*4); \ + rsave (133, VREGS + 20*4); \ + rsave (134, VREGS + 21*4); \ + rsave (135, VREGS + 22*4); \ + rsave (136, VREGS + 23*4); \ + rsave (137, VREGS + 24*4); \ + rsave (138, VREGS + 25*4); \ + rsave (139, VREGS + 26*4); \ + rsave (140, VREGS + 27*4); \ + rsave (141, VREGS + 28*4); \ + rsave (142, VREGS + 29*4); \ + rsave (143, VREGS + 30*4); \ + rsave (144, VREGS + 31*4); #else #define EH_FRAME_VMX #endif
Signature · 1 line
1.6.0.2.GIT
Quoted 13 lines · Liming Wang
SPE registers use the high part bit0~bit31 of E500 GPR0~GPR31. The unwind information in "
eh_frame" section is used during exception handling and describes register information in the signal frame. But current unwind information doesn't cover SPE registers, which have been saved in the signal frame. This patch adds this unwind information to "eh_frame" section.SPE registers use register number 1200+N to identify register 'N', but they start from 113 in unwind column, which is computed from gcc source code, macro
DWARF_REG_TO_UNWIND_COLUMN:#define FIRST_PSEUDO_REGISTER 114 #define DWARF_REG_TO_UNWIND_COLUMN(r) \
Quoted 7 lines
((r) > 1200 ? ((r) - 1200 +
FIRST_PSEUDO_REGISTER- 1) : (r))Signed-off-by Liming Wang <[email protected]>---
arch/powerpc/kernel/vdso32/sigtramp.S| 34 ++++++++++++++++++++++++
+++++++++1 files changed, 34 insertions(+), 0 deletions(-)
What about SPEFSCR & the accumulator? Are they not part of the frame? They probably should be.
arch/powerpc/kernel/vdso32/sigtramp.S V_FUNCTION_END(__kernel_sigtramp_rt32) · line 255
Quoted 10 lines
arch/powerpc/kernel/vdso32/sigtramp.S +2
-0@@ -251,6 +251,40 @@ V_FUNCTION_END(__kernel_sigtramp_rt32) vsave_msr1 (31); \ vsave_msr2 (33, 32*16+12); \ vsave (32, 32*16) +#elif defined(CONFIG_SPE) +#define EH_FRAME_VMX \
introduce EH_FRAME_SPE.
arch/powerpc/kernel/vdso32/sigtramp.S V_FUNCTION_END(__kernel_sigtramp_rt32) · line 256
Quoted 1 line
arch/powerpc/kernel/vdso32/sigtramp.S +1
-0+ rsave (113, VREGS); \
we should probably be doing the same thing as vsave_msr1()
- k