usb/serial: adding FTDI USB/Serial converter devices
Subsystems (2)
PATCH 1/1 usb/serial: adding FTDI USB/Serial converter devices
From: Axel Wachtler <[email protected]>
This patch adds the following devices to the USB FTDI SIO device table:
Bus 001 Device 009: ID 03eb:2109 Atmel Corp.
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187
Bus 001 Device 008: ID 1cf1:0001
http://www.dresden-elektronik.de/shop/prod75.html
Bus 001 Device 007: ID 1c1f:0004
http://www.dresden-elektronik.de/shop/prod64.html
Signed-off-by Axel Wachtler <[email protected]>
Signed-off-by Robert Richter <[email protected]>
--- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+), 0 deletions(-)
drivers/usb/serial/ftdi_sio.c +3 -0
@@ -663,6 +663,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, + { USB_DEVICE(ATMEL_VID, STK541_PID) }, + { USB_DEVICE(DE_VID, STB_PID) }, + { USB_DEVICE(DE_VID, WHT_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ };
drivers/usb/serial/ftdi_sio.h +13 -0
@@ -893,6 +893,19 @@#define DIEBOLD_BCS_SE923_PID 0xfb99/* +* Atmel STK541 +*/ +#define ATMEL_VID 0x03eb/* Vendor ID */ +#define STK541_PID 0x2109/* Zigbee Controller */ + +/* +* Dresden Elektronic Sensor Terminal Board +*/ +#define DE_VID 0x1cf1/* Vendor ID */ +#define STB_PID 0x0001/* Sensor Terminal Board */ +#define WHT_PID 0x0004/* Wireless Handheld Terminal */ + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0
Signature · 1 line
1.6.1.3