New HID device support
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · Jason Noble
Jiri,
After a bit of googling I'm pretty sure you are the person to ask for
help.I have a new Kensington Slimblade Trackball
http://us.kensington.com/html/16632.html. This device just recently started shipping, I'm probably one of the first few people to connect one to linux.
Quoted 5 lines
Using "evtest
/dev/input/eventX" two of the four buttons are not registering at all. With usbmon I can see data coming from these buttons.
Can you help? If so, what info do you need?
If not, can you point me in the correct direction?
Could you please compile your kernel with CONFIG_HID_DEBUG, modprobe the 'hid' module with 'debug=2' option, and send me the output that appears in dmesg when you
- connect the device
- press the non-working buttons
Thanks,
Signature · 2 lines
Jiri Kosina SUSE Labs
Quoted 17 lines · Jiri Kosina
Quoted 9 lines · Jason Noble
Jiri,
After a bit of googling I'm pretty sure you are the person to ask for
help.I have a new Kensington Slimblade Trackball
http://us.kensington.com/html/16632.html. This device just recently started shipping, I'm probably one of the first few people to connect one to linux.Quoted 5 lines
Using "evtest
/dev/input/eventX" two of the four buttons are not registering at all. With usbmon I can see data coming from these buttons.
Can you help? If so, what info do you need?
If not, can you point me in the correct direction?
Quoted 3 lines
Could you please compile your kernel with
CONFIG_HID_DEBUG, modprobe the 'hid' module with 'debug=2' option, and send me the output that appears in dmesg when you
On a monolithic kernel I just pass usbhid.debug=2 at boot correct?
Quoted 6 lines
- connect the device
- press the non-working buttonsThanks,
Quoted 4 lines · Jason Noble
Quoted 3 lines
Could you please compile your kernel with
CONFIG_HID_DEBUG, modprobe the 'hid' module with 'debug=2' option, and send me the output that appears in dmesg when youOn a monolithic kernel I just pass usbhid.debug=2 at boot correct?
The module accepting the 'debug' option is 'hid', i.e. make this 'hid.debug=2'.
Signature · 2 lines
Jiri Kosina SUSE Labs
Attached is the output.
Geez, that was a pain. I ended up connecting a PS/2 keyboard and mouse, to stop mucking up the logs.
Quoted 17 lines · Jiri Kosina
Quoted 9 lines · Jason Noble
Jiri,
After a bit of googling I'm pretty sure you are the person to ask for
help.I have a new Kensington Slimblade Trackball
http://us.kensington.com/html/16632.html. This device just recently started shipping, I'm probably one of the first few people to connect one to linux.Quoted 5 lines
Using "evtest
/dev/input/eventX" two of the four buttons are not registering at all. With usbmon I can see data coming from these buttons.
Can you help? If so, what info do you need?
If not, can you point me in the correct direction?
Quoted 9 lines
Could you please compile your kernel with
CONFIG_HID_DEBUG, modprobe the 'hid' module with 'debug=2' option, and send me the output that appears in dmesg when you- connect the device
- press the non-working buttonsThanks,
usb 6-2: new low speed USB device using uhci_hcd and address 2
usb 6-2: configuration #1 chosen from 1 choicedrivers/hid/usbhid/hid-core.c: HID probe called for ifnum 0drivers/hid/usbhid/hid-core.c: report descriptor (size 75, read 1) = 05 01 09 02 a1 01 09 01 a1 00 05 09 19 01 29 02 15 00 25 01 95 02 75 01 81 02 95 01 75 06 81 03 05 01 09 30 09 31 09 38 15 81 25 7f 75 08 95 03 81 06 06 00 ff 19 01 29 02 15 00 25 01 95 02 75 01 81 02 95 01 75 06 81 03 c0 c0
INPUT[INPUT]
Field(0)
Physical(GenericDesktop.Pointer)
Usage(2)
Button.0001
Button.0002
Logical Minimum(0)
Logical Maximum(1)
Report Size(1)
Report Count(2)
Report Offset(0)
Flags( Variable Absolute )
Field(1)
Physical(GenericDesktop.Pointer)
Usage(3)
GenericDesktop.X
GenericDesktop.Y
GenericDesktop.Wheel
Logical Minimum(-127)
Logical Maximum(127)
Report Size(8)
Report Count(3)
Report Offset(8)
Flags( Variable Relative )
Field(2)
Physical(GenericDesktop.Pointer)
Usage(2)
ff00.0001
ff00.0002
Logical Minimum(0)
Logical Maximum(1)
Report Size(1)
Report Count(2)
Report Offset(32)
Flags( Variable Absolute )drivers/hid/hid-input.c: Mapping: Button.0001 ---> Key.LeftBtndrivers/hid/hid-input.c: Mapping: Button.0002 ---> Key.RightBtndrivers/hid/hid-input.c: Mapping: GenericDesktop.X ---> Relative.Xdrivers/hid/hid-input.c: Mapping: GenericDesktop.Y ---> Relative.Ydrivers/hid/hid-input.c: Mapping: GenericDesktop.Wheel ---> Relative.Wheeldrivers/hid/hid-input.c: Mapping: ff00.0001 ---> IGNOREDdrivers/hid/hid-input.c: Mapping: ff00.0002 ---> IGNORED
input: Kensington Kensington Slimblade Trackball as /class/input/input7
generic-usb 0003:047D:2041.0002: input,hidraw1: USB HID v1.10 Mouse [Kensington Kensington Slimblade Trackball] on usb-0000:00:1a.0-2/input0 usb 6-2: New USB device found, idVendor=047d, idProduct=2041
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Kensington Slimblade Trackball
usb 6-2: Manufacturer: Kensingtondrivers/hid/hid-core.c: report (size 5) (unnumbered)drivers/hid/hid-core.c: report 0 (size 5) = 00 00 00 00 01
hid-debug: input Button.0001 = 0
hid-debug: input Button.0002 = 0
hid-debug: input GenericDesktop.X = 0
hid-debug: input GenericDesktop.Y = 0
hid-debug: input GenericDesktop.Wheel = 0
hid-debug: input ff00.0001 = 1
hid-debug: input ff00.0002 = 0drivers/hid/hid-core.c: report (size 5) (unnumbered)drivers/hid/hid-core.c: report 0 (size 5) = 00 00 00 00 00
hid-debug: input Button.0001 = 0
hid-debug: input Button.0002 = 0
hid-debug: input GenericDesktop.X = 0
hid-debug: input GenericDesktop.Y = 0
hid-debug: input GenericDesktop.Wheel = 0
hid-debug: input ff00.0001 = 0
hid-debug: input ff00.0002 = 0drivers/hid/hid-core.c: report (size 5) (unnumbered)drivers/hid/hid-core.c: report 0 (size 5) = 00 00 00 00 02
hid-debug: input Button.0001 = 0
hid-debug: input Button.0002 = 0
hid-debug: input GenericDesktop.X = 0
hid-debug: input GenericDesktop.Y = 0
hid-debug: input GenericDesktop.Wheel = 0
hid-debug: input ff00.0001 = 0
hid-debug: input ff00.0002 = 1drivers/hid/hid-core.c: report (size 5) (unnumbered)drivers/hid/hid-core.c: report 0 (size 5) = 00 00 00 00 00
hid-debug: input Button.0001 = 0
hid-debug: input Button.0002 = 0
hid-debug: input GenericDesktop.X = 0
hid-debug: input GenericDesktop.Y = 0
hid-debug: input GenericDesktop.Wheel = 0
hid-debug: input ff00.0001 = 0
hid-debug: input ff00.0002 = 0
Quoted 1 line · Jason Noble
Attached is the output.
Thanks. Does the driver below make your device work properly?
From: Jiri Kosina <[email protected]>
HID: support for Kensington silblade trackball
Establish proper button mappings for 0x47d/0x2041 device.
drivers/hid/Kconfig +7 -0
@@ -150,6 +150,13 @@ config HID_GYRATION ---help--- Support for Gyration remote control. +config HID_KENSINGTON + tristate "Kensington" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Kensington Slimblade Trackball. + config HID_LOGITECH tristate "Logitech" if EMBEDDED depends on USB_HID
drivers/hid/Makefile +1 -0
@@ -29,6 +29,7 @@ obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_DRAGONRISE_FF) += hid-drff.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o +obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
drivers/hid/hid-core.c +1 -0
@@ -1270,6 +1270,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
drivers/hid/hid-dummy.c +3 -0
@@ -37,6 +37,9 @@ static int __init hid_dummy_init(void)#ifdef CONFIG_HID_GYRATION_MODULE HID_COMPAT_CALL_DRIVER (gyration);#endif +#ifdef CONFIG_HID_KENSINGTON_MODULE +HID_COMPAT_CALL_DRIVER (kensington); +#endif #ifdef CONFIG_HID_LOGITECH_MODULE HID_COMPAT_CALL_DRIVER (logitech);#endif
drivers/hid/hid-ids.h +3 -0
@@ -274,6 +274,9 @@#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 +#define USB_VENDOR_ID_KENSINGTON 0x047d +#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041 +#define USB_VENDOR_ID_LOGITECH 0x046d#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110
drivers/hid/hid-kensington.c new file +65 -0
65 lines not on this page · raw message
Should this apply against 2.6.28.7?
Sorry, I'm probably doing something wrong, I've only ever applied whole kernel patches.
cd /usr/src
patch -p0 < patch-file-name-here
Quoted 156 lines · Jiri Kosina
Quoted 1 line · Jason Noble
Attached is the output.
Thanks. Does the driver below make your device work properly?
From: Jiri Kosina <[email protected]>
HID: support for Kensington silblade trackball
Establish proper button mappings for 0x47d/0x2041 device.
Signed-off-by Jiri Kosina <[email protected]>drivers/hid/Kconfig +7
-0@@ -150,6 +150,13 @@ config HID_GYRATION ---help--- Support for Gyration remote control. +config HID_KENSINGTON + tristate "Kensington" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Kensington Slimblade Trackball. + config HID_LOGITECH tristate "Logitech" if EMBEDDED depends on USB_HIDdrivers/hid/Makefile +1
-0@@ -29,6 +29,7 @@ obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_DRAGONRISE_FF) += hid-drff.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o +obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.odrivers/hid/hid-core.c +1
-0@@ -1270,6 +1270,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },drivers/hid/hid-dummy.c +3
-0@@ -37,6 +37,9 @@ static int __init hid_dummy_init(void)#ifdef CONFIG_HID_GYRATION_MODULE HID_COMPAT_CALL_DRIVER (gyration);#endif +#ifdef CONFIG_HID_KENSINGTON_MODULE +HID_COMPAT_CALL_DRIVER (kensington); +#endif #ifdef CONFIG_HID_LOGITECH_MODULE HID_COMPAT_CALL_DRIVER (logitech);#endif drivers/hid/hid-ids.h +3
-0@@ -274,6 +274,9 @@#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 +#define USB_VENDOR_ID_KENSINGTON 0x047d +#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041 +#define USB_VENDOR_ID_LOGITECH 0x046d#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110drivers/hid/hid-kensington.c new file +65
-0@@ -0,0 +1,65 @@ +/* +* HID driver for Kensigton special device +* +* Copyright (c) 2009 Jiri Kosina +*/ + +/* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation; either version 2 of the License, or (at your option) +* any later version. +*/ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +#define ks_map_key (c) hid_map_usage(hi, usage, bit, max, EV_KEY, (c)) + +static int ks_input_mapping (struct hid_device *hdev,struct hid_input *hi, +struct hid_field *field,struct hid_usage *usage, +unsigned long **bit,int *max) +{ +if ((usage->hid &HID_USAGE_PAGE ) !=HID_UP_MSVENDOR ) +return 0 ; + +switch (usage->hid &HID_USAGE ) { +case 0x01 :ks_map_key (BTN_2 );break ; +case 0x02 :ks_map_key (BTN_3 );break ; +default : +return 0 ; + } +return 1 ; +} + +static const struct hid_device_id ks_devices[] = { + {HID_USB_DEVICE (USB_VENDOR_ID_KENSINGTON ,USB_DEVICE_ID_KS_SLIMBLADE ) }, + { } +}; +MODULE_DEVICE_TABLE (hid, ks_devices); + +static struct hid_driver ks_driver = { + .name ="kensington" , + .id_table = ks_devices, + .input_mapping = ks_input_mapping, +}; + +static int ks_init (void ) +{ +return hid_register_driver (&ks_driver); +} + +static void ks_exit (void ) +{ +hid_unregister_driver (&ks_driver); +} + +module_init (ks_init); +module_exit (ks_exit); +MODULE_LICENSE ("GPL" ); + +HID_COMPAT_LOAD_DRIVER (kensington);
2.6.28.7
patching file a/drivers/hid/Kconfig
Hunk #1 succeeded at 157 with fuzz 2 (offset 7 lines). patching file a/drivers/hid/Makefile
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/Makefile.rej
patching file a/drivers/hid/hid-core.c
Hunk #1 FAILED at 1270.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/hid-core.c.rej
patching file a/drivers/hid/hid-dummy.c
Hunk #1 succeeded at 34 with fuzz 2 (offset -3 lines). patching file a/drivers/hid/hid-ids.h
Hunk #1 FAILED at 274.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/hid-ids.h.rej
patching file b/drivers/hid/hid-kensington.c
Quoted 161 lines · Jiri Kosina
Quoted 1 line · Jason Noble
Attached is the output.
Thanks. Does the driver below make your device work properly?
From: Jiri Kosina <[email protected]>
HID: support for Kensington silblade trackball
Establish proper button mappings for 0x47d/0x2041 device.
Signed-off-by Jiri Kosina <[email protected]>drivers/hid/Kconfig +7
-0@@ -150,6 +150,13 @@ config HID_GYRATION ---help--- Support for Gyration remote control. +config HID_KENSINGTON + tristate "Kensington" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Kensington Slimblade Trackball. + config HID_LOGITECH tristate "Logitech" if EMBEDDED depends on USB_HIDdrivers/hid/Makefile +1
-0@@ -29,6 +29,7 @@ obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_DRAGONRISE_FF) += hid-drff.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o +obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.odrivers/hid/hid-core.c +1
-0@@ -1270,6 +1270,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },drivers/hid/hid-dummy.c +3
-0@@ -37,6 +37,9 @@ static int __init hid_dummy_init(void)#ifdef CONFIG_HID_GYRATION_MODULE HID_COMPAT_CALL_DRIVER (gyration);#endif +#ifdef CONFIG_HID_KENSINGTON_MODULE +HID_COMPAT_CALL_DRIVER (kensington); +#endif #ifdef CONFIG_HID_LOGITECH_MODULE HID_COMPAT_CALL_DRIVER (logitech);#endif drivers/hid/hid-ids.h +3
-0@@ -274,6 +274,9 @@#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 +#define USB_VENDOR_ID_KENSINGTON 0x047d +#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041 +#define USB_VENDOR_ID_LOGITECH 0x046d#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110drivers/hid/hid-kensington.c new file +65
-1@@ -0,0 +1,65 @@ +/* +* HID driver for Kensigton special device +* +* Copyright (c) 2009 Jiri Kosina +*/ + +/* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation; either version 2 of the License, or (at your option) +* any later version. +*/ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +#define ks_map_key (c) hid_map_usage(hi, usage, bit, max, EV_KEY, (c)) + +static int ks_input_mapping (struct hid_device *hdev,struct hid_input *hi, +struct hid_field *field,struct hid_usage *usage, +unsigned long **bit,int *max) +{ +if ((usage->hid &HID_USAGE_PAGE ) !=HID_UP_MSVENDOR ) +return 0 ; + +switch (usage->hid &HID_USAGE ) { +case 0x01 :ks_map_key (BTN_2 );break ; +case 0x02 :ks_map_key (BTN_3 );break ; +default : +return 0 ; + } +return 1 ; +} + +static const struct hid_device_id ks_devices[] = { + {HID_USB_DEVICE (USB_VENDOR_ID_KENSINGTON ,USB_DEVICE_ID_KS_SLIMBLADE ) }, + { } +}; +MODULE_DEVICE_TABLE (hid, ks_devices); + +static struct hid_driver ks_driver = { + .name ="kensington" , + .id_table = ks_devices, + .input_mapping = ks_input_mapping, +}; + +static int ks_init (void ) +{ +return hid_register_driver (&ks_driver); +} + +static void ks_exit (void ) +{ +hid_unregister_driver (&ks_driver); +} + +module_init (ks_init); +module_exit (ks_exit); +MODULE_LICENSE ("GPL" ); + +HID_COMPAT_LOAD_DRIVER (kensington); --To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Jason Noble
2.6.28.7
patching file a/drivers/hid/Kconfig
Hunk #1 succeeded at 157 with fuzz 2 (offset 7 lines). patching file a/drivers/hid/Makefile
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/Makefile.rej
patching filea/drivers/hid/hid-core.c
Hunk #1 FAILED at 1270.
1 out of 1 hunk FAILED -- saving rejects to file
Quoted 8 lines
a/drivers/hid/hid-core.c.rej
patching filea/drivers/hid/hid-dummy.c
Hunk #1 succeeded at 34 with fuzz 2 (offset -3 lines). patching filea/drivers/hid/hid-ids.h
Hunk #1 FAILED at 274.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/hid-ids.h.rej
patching fileb/drivers/hid/hid-kensington.c
The patch was against HID development tree.
Please try the one below instead, I have refreshed it to apply on top of 2.6.28.7
drivers/hid/Kconfig +7 -0
@@ -157,6 +157,13 @@ config HID_GYRATION ---help--- Support for Gyration remote control. +config HID_KENSINGTON + tristate "Kensington" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Kensington Slimblade Trackball. + config HID_LOGITECH tristate "Logitech" if EMBEDDED depends on USB_HID
drivers/hid/Makefile +1 -0
@@ -30,6 +30,7 @@ obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_HID_DELL) += hid-dell.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o +obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
drivers/hid/hid-core.c +1 -0
@@ -1271,6 +1271,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
drivers/hid/hid-dummy.c +3 -0
@@ -34,6 +34,9 @@ static int __init hid_dummy_init(void)#ifdef CONFIG_HID_GYRATION_MODULE HID_COMPAT_CALL_DRIVER (gyration);#endif +#ifdef CONFIG_HID_KENSINGTON_MODULE +HID_COMPAT_CALL_DRIVER (kensington); +#endif #ifdef CONFIG_HID_LOGITECH_MODULE HID_COMPAT_CALL_DRIVER (logitech);#endif
drivers/hid/hid-ids.h +3 -0
@@ -279,6 +279,9 @@#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 +#define USB_VENDOR_ID_KENSINGTON 0x047d +#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041 +#define USB_VENDOR_ID_LOGITECH 0x046d#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110
drivers/hid/hid-kensington.c new file +65 -0
65 lines not on this page · raw message
Sorry to be such a bother.
Attached .rej files if they help.
clean just untared 2.6.28.7
patching file a/drivers/hid/Kconfig
Hunk #1 succeeded at 157 with fuzz 2.
patching file a/drivers/hid/Makefile
Hunk #1 FAILED at 30.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/Makefile.rej
patching file a/drivers/hid/hid-core.c
Hunk #1 FAILED at 1271.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/hid-core.c.rej
patching file a/drivers/hid/hid-dummy.c
Hunk #1 succeeded at 34 with fuzz 2.
patching file a/drivers/hid/hid-ids.h
Hunk #1 FAILED at 279.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/hid-ids.h.rej
patching file b/drivers/hid/hid-kensington.c
paradox:/usr/src# ls a/drivers/hid/Makefile.rej a/drivers/hid/Makefile.rej
Quoted 174 lines · Jiri Kosina
Quoted 11 lines · Jason Noble
2.6.28.7
patching file a/drivers/hid/Kconfig
Hunk #1 succeeded at 157 with fuzz 2 (offset 7 lines). patching file a/drivers/hid/Makefile
Hunk #1 FAILED at 29.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/Makefile.rej
patching filea/drivers/hid/hid-core.c
Hunk #1 FAILED at 1270.
1 out of 1 hunk FAILED -- saving rejects to fileQuoted 8 lines
a/drivers/hid/hid-core.c.rej
patching filea/drivers/hid/hid-dummy.c
Hunk #1 succeeded at 34 with fuzz 2 (offset -3 lines). patching filea/drivers/hid/hid-ids.h
Hunk #1 FAILED at 274.
1 out of 1 hunk FAILED -- saving rejects to file a/drivers/hid/hid-ids.h.rej
patching fileb/drivers/hid/hid-kensington.cThe patch was against HID development tree.
Please try the one below instead, I have refreshed it to apply on top of 2.6.28.7
drivers/hid/Kconfig +7
-0@@ -157,6 +157,13 @@ config HID_GYRATION ---help--- Support for Gyration remote control. +config HID_KENSINGTON + tristate "Kensington" if EMBEDDED + depends on USB_HID + default !EMBEDDED + ---help--- + Support for Kensington Slimblade Trackball. + config HID_LOGITECH tristate "Logitech" if EMBEDDED depends on USB_HIDdrivers/hid/Makefile +1
-0@@ -30,6 +30,7 @@ obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o obj-$(CONFIG_HID_DELL) += hid-dell.o obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o obj-$(CONFIG_HID_GYRATION) += hid-gyration.o +obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o obj-$(CONFIG_HID_MONTEREY) += hid-monterey.odrivers/hid/hid-core.c +1
-0@@ -1271,6 +1271,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },drivers/hid/hid-dummy.c +3
-0@@ -34,6 +34,9 @@ static int __init hid_dummy_init(void)#ifdef CONFIG_HID_GYRATION_MODULE HID_COMPAT_CALL_DRIVER (gyration);#endif +#ifdef CONFIG_HID_KENSINGTON_MODULE +HID_COMPAT_CALL_DRIVER (kensington); +#endif #ifdef CONFIG_HID_LOGITECH_MODULE HID_COMPAT_CALL_DRIVER (logitech);#endif drivers/hid/hid-ids.h +3
-0@@ -279,6 +279,9 @@#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 +#define USB_VENDOR_ID_KENSINGTON 0x047d +#define USB_DEVICE_ID_KS_SLIMBLADE 0x2041 +#define USB_VENDOR_ID_LOGITECH 0x046d#define USB_DEVICE_ID_LOGITECH_RECEIVER 0xc101#define USB_DEVICE_ID_LOGITECH_HARMONY_FIRST 0xc110drivers/hid/hid-kensington.c new file +65
-1@@ -0,0 +1,65 @@ +/* +* HID driver for Kensigton special device +* +* Copyright (c) 2009 Jiri Kosina +*/ + +/* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the Free +* Software Foundation; either version 2 of the License, or (at your option) +* any later version. +*/ + +#include <linux/device.h> +#include <linux/input.h> +#include <linux/hid.h> +#include <linux/module.h> + +#include "hid-ids.h" + +#define ks_map_key (c) hid_map_usage(hi, usage, bit, max, EV_KEY, (c)) + +static int ks_input_mapping (struct hid_device *hdev,struct hid_input *hi, +struct hid_field *field,struct hid_usage *usage, +unsigned long **bit,int *max) +{ +if ((usage->hid &HID_USAGE_PAGE ) !=HID_UP_MSVENDOR ) +return 0 ; + +switch (usage->hid &HID_USAGE ) { +case 0x01 :ks_map_key (BTN_2 );break ; +case 0x02 :ks_map_key (BTN_3 );break ; +default : +return 0 ; + } +return 1 ; +} + +static const struct hid_device_id ks_devices[] = { + {HID_USB_DEVICE (USB_VENDOR_ID_KENSINGTON ,USB_DEVICE_ID_KS_SLIMBLADE ) }, + { } +}; +MODULE_DEVICE_TABLE (hid, ks_devices); + +static struct hid_driver ks_driver = { + .name ="kensington" , + .id_table = ks_devices, + .input_mapping = ks_input_mapping, +}; + +static int ks_init (void ) +{ +return hid_register_driver (&ks_driver); +} + +static void ks_exit (void ) +{ +hid_unregister_driver (&ks_driver); +} + +module_init (ks_init); +module_exit (ks_exit); +MODULE_LICENSE ("GPL" ); + +HID_COMPAT_LOAD_DRIVER (kensington); --To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 22 lines · Jason Noble
Sorry to be such a bother.
Attached .rej files if they help.clean just untared 2.6.28.7
patching file a/drivers/hid/Kconfig
Hunk #1 succeeded at 157 with fuzz 2.
patching file a/drivers/hid/Makefile
Hunk #1 FAILED at 30.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/Makefile.rej
patching filea/drivers/hid/hid-core.c
Hunk #1 FAILED at 1271.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/hid-core.c.rej
patching filea/drivers/hid/hid-dummy.c
Hunk #1 succeeded at 34 with fuzz 2.
patching filea/drivers/hid/hid-ids.h
Hunk #1 FAILED at 279.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/hid-ids.h.rej
patching fileb/drivers/hid/hid-kensington.c
Quoted 2 lines
paradox:/usr/src# ls a/drivers/hid/Makefile.rej a/drivers/hid/Makefile.rej
Odd, the patch I sent you was based on 2.6.28.7.
You can just add the lines from .rej files manually, it's only 6 lines of code or so.
Signature · 2 lines
Jiri Kosina SUSE Labs
I made a minor tweak. Please include in the official patch. (BTN_2 and BTN_3, are not very useful xev doesn't even see them)
- case 0x01: ks_map_key(BTN_2); break; - case 0x02: ks_map_key(BTN_3); break; + case 0x01: ks_map_key(BTN_MIDDLE); break; + case 0x02: ks_map_key(BTN_SIDE); break;
Other than that, it works great!
You are awesome, thank you very very much!!
P.S.
I think the failed patch issues were caused by email eating the code format. Manually editing the failed patch files worked.
Quoted 32 lines · Jiri Kosina
Quoted 22 lines · Jason Noble
Sorry to be such a bother.
Attached .rej files if they help.clean just untared 2.6.28.7
patching file a/drivers/hid/Kconfig
Hunk #1 succeeded at 157 with fuzz 2.
patching file a/drivers/hid/Makefile
Hunk #1 FAILED at 30.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/Makefile.rej
patching filea/drivers/hid/hid-core.c
Hunk #1 FAILED at 1271.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/hid-core.c.rej
patching filea/drivers/hid/hid-dummy.c
Hunk #1 succeeded at 34 with fuzz 2.
patching filea/drivers/hid/hid-ids.h
Hunk #1 FAILED at 279.
1 out of 1 hunk FAILED -- saving rejects to file
a/drivers/hid/hid-ids.h.rej
patching fileb/drivers/hid/hid-kensington.cQuoted 2 lines
paradox:/usr/src# ls a/drivers/hid/Makefile.rej a/drivers/hid/Makefile.rejOdd, the patch I sent you was based on 2.6.28.7.
You can just add the lines from .rej files manually, it's only 6 lines of code or so.
Quoted 11 lines · Jason Noble
I made a minor tweak. Please include in the official patch. (
BTN_2andBTN_3, are not very useful xev doesn't even see them)(quoted diff) +2
-2- case 0x01: ks_map_key(BTN_2); break; - case 0x02: ks_map_key(BTN_3); break; + case 0x01: ks_map_key(BTN_MIDDLE); break; + case 0x02: ks_map_key(BTN_SIDE); break;Other than that, it works great!
You are awesome, thank you very very much!!
Thanks for testing. I will put you in Reported-by:, if you don't mind, and queue the patch patch in my tree.
Signature · 2 lines
Jiri Kosina SUSE Labs
No problem, glad to help out.
Very glad to get my buttons working. ;-)
Do you think this will make its way into 2.6.29?
Quoted 17 lines · Jiri Kosina
Quoted 11 lines · Jason Noble
I made a minor tweak. Please include in the official patch. (
BTN_2andBTN_3, are not very useful xev doesn't even see them)(quoted diff) +2
-2- case 0x01: ks_map_key(BTN_2); break; - case 0x02: ks_map_key(BTN_3); break; + case 0x01: ks_map_key(BTN_MIDDLE); break; + case 0x02: ks_map_key(BTN_SIDE); break;Other than that, it works great!
You are awesome, thank you very very much!!
Thanks for testing. I will put you in Reported-by:, if you don't mind, and queue the patch patch in my tree.
Quoted 4 lines · Jason Noble
No problem, glad to help out.
Very glad to get my buttons working. ;-)Do you think this will make its way into 2.6.29?
If there is any urgent bugfix that needs to go to 2.6.29, I will push it altogether. Otherwise it will probably go through 2.6.30 queue.
Signature · 2 lines
Jiri Kosina SUSE Labs
Sounds good, thanks again!
Quoted 10 lines · Jiri Kosina
Quoted 4 lines · Jason Noble
No problem, glad to help out.
Very glad to get my buttons working. ;-)Do you think this will make its way into 2.6.29?
If there is any urgent bugfix that needs to go to 2.6.29, I will push it altogether. Otherwise it will probably go through 2.6.30 queue.