Skip to contentSkip to conversation

be2net: fw commands, ethtool i/f and Kconfig/Makefile

PATCH In review Sathya Perla 1 participant 1 message Mar 10, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 3/3 be2net: fw commands, ethtool i/f and Kconfig/Makefile

---
 MAINTAINERS                    |    9 +
 drivers/net/Kconfig            |    2 +
 drivers/net/Makefile           |    1 +
 drivers/net/benet/Kconfig      |    7 +
 drivers/net/benet/Makefile     |    7 +
 drivers/net/benet/be_cmds.c    |  861 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/benet/be_ethtool.c |  362 +++++++++++++++++
 7 files changed, 1249 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/benet/Kconfig
 create mode 100644 drivers/net/benet/Makefile
 create mode 100644 drivers/net/benet/be_cmds.c
 create mode 100644 drivers/net/benet/be_ethtool.c
MAINTAINERS +9 -0
index 1c2ca1d..4393443 100644
@@ -3880,6 +3880,15 @@ L:	[email protected]
 T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
 
+SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
+P:	Sathya Perla
+M:	[email protected]
+P:      Subbu Seetharaman
+M:      [email protected]
+L:      [email protected]
+W:      http://www.serverengines.com
+S:      Supported
+
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings
drivers/net/Kconfig +2 -0
index a2f185f..9bf3ca9 100644
@@ -2619,6 +2619,8 @@ config QLGE
 
 source "drivers/net/sfc/Kconfig"
 
+source "drivers/net/benet/Kconfig"
+
 endif # NETDEV_10000
 
 source "drivers/net/tokenring/Kconfig"
drivers/net/Makefile +1 -0
index aca8492..0c862c3 100644
@@ -22,6 +22,7 @@ obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
 obj-$(CONFIG_ENIC) += enic/
 obj-$(CONFIG_JME) += jme.o
+obj-$(CONFIG_BE2NET) += benet/
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \
drivers/net/benet/Kconfig new file +7 -0
new file mode 100644
index 0000000..c6934f1
@@ -0,0 +1,7 @@
+config BE2NET
+	tristate "ServerEngines' 10Gbps NIC - BladeEngine 2"
+	depends on PCI && INET
+	select INET_LRO
+	help
+	This driver implements the NIC functionality for ServerEngines'
+	10Gbps network adapter - BladeEngine 2.
drivers/net/benet/Makefile new file +7 -0
new file mode 100644
index 0000000..a60cd80
@@ -0,0 +1,7 @@
+#
+# Makefile to build the network driver for ServerEngine's BladeEngine.
+#
+
+obj-$(CONFIG_BE2NET) += be2net.o
+
+be2net-y :=  be_main.o be_cmds.o be_ethtool.o
drivers/net/benet/be_cmds.c new file +861 -0

861 lines not on this page · raw message

drivers/net/benet/be_ethtool.c new file +362 -0

362 lines not on this page · raw message

Signature · 12 lines
1.6.1.3





___________________________________________________________________________________
This message, together with any attachment(s), contains confidential and proprietary information of
ServerEngines Corporation and is intended only for the designated recipient(s) named above. Any unauthorized
review, printing, retention, copying, disclosure or distribution is strictly prohibited.  If you are not the
intended recipient of this message, please immediately advise the sender by reply email message and
delete all copies of this message and any attachment(s). Thank you.