Pinnacle PCTV Hybrid Pro Card (310c)... once again...
Hello readers,
Amazon just had this card transported to me today... and of course I gave the in-kernel 2.6.28.7 drivers a shot, but it didn't work out at all, so I thought giving the repo provided in the wiki article (for reference:
http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_Hybrid_Pro_Card_%28310c%29)
would be a good idea.
Thus, I removed every in-kernel tuner and DVB module, checked the repo out, build the new modules and had them installed. This, however, yielded following results (dmesg extract):
[ 1988.812035] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 1988.812102] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0xffffff] [ 1988.812225] pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0xffffff] [ 1988.812341] pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0xffffff] [ 2003.326837] cx25843.c: starting probe for adapter SMBus I801 adapter at 18e0 (0x40004) [ 2003.328060] cx25843.c: detecting cx25843 client on address 0x88 [ 2003.328090] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.328511] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.328961] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.335211] em28xx: Unknown symbol v4l_compat_translate_ioctl [ 2003.335404] em28xx: Unknown symbol v4l2_video_std_construct [ 2003.335850] em28xx: Unknown symbol v4l2_type_names [ 2003.339965] em28xx: Unknown symbol v4l_printk_ioctl [ 2003.340663] em28xx: Unknown symbol video_unregister_device [ 2003.340851] em28xx: Unknown symbol video_device_alloc [ 2003.340948] em28xx: Unknown symbol video_register_device [ 2003.342372] em28xx: Unknown symbol video_usercopy [ 2003.342470] em28xx: Unknown symbol video_device_release [ 2003.352874] em28xx_audio: Unknown symbol em28xx_i2c_call_clients [ 2003.353305] em28xx_audio: Unknown symbol snd_pcm_new [ 2003.353407] em28xx_audio: Unknown symbol snd_card_register [ 2003.353508] em28xx_audio: Unknown symbol snd_card_free [ 2003.353683] em28xx_audio: Unknown symbol snd_component_add [ 2003.353873] em28xx_audio: Unknown symbol snd_card_new [ 2003.353977] em28xx_audio: Unknown symbol snd_pcm_lib_ioctl [ 2003.354280] em28xx_audio: Unknown symbol em28xx_unregister_extension [ 2003.354465] em28xx_audio: Unknown symbol snd_pcm_set_ops [ 2003.354570] em28xx_audio: Unknown symbol snd_pcm_hw_constraint_integer [ 2003.354691] em28xx_audio: Unknown symbol em28xx_register_extension [ 2003.354910] em28xx_audio: Unknown symbol snd_pcm_period_elapsed [ 2003.357625] em28xx_aad: Unknown symbol em28xx_unregister_extension [ 2003.357753] em28xx_aad: Unknown symbol em28xx_register_extension [ 2003.358895] em28xx_dvb: Unknown symbol dvb_dmxdev_init [ 2003.359262] em28xx_dvb: Unknown symbol dvb_register_adapter [ 2003.359506] em28xx_dvb: Unknown symbol dvb_dmx_release [ 2003.359602] em28xx_dvb: Unknown symbol em28xx_unregister_extension [ 2003.359787] em28xx_dvb: Unknown symbol dvb_net_init [ 2003.359886] em28xx_dvb: Unknown symbol dvb_dmx_swfilter [ 2003.360514] em28xx_dvb: Unknown symbol dvb_dmxdev_release [ 2003.360638] em28xx_dvb: Unknown symbol dvb_frontend_detach [ 2003.360737] em28xx_dvb: Unknown symbol dvb_net_release [ 2003.360898] em28xx_dvb: Unknown symbol em28xx_register_extension [ 2003.361189] em28xx_dvb: Unknown symbol dvb_unregister_frontend [ 2003.361455] em28xx_dvb: Unknown symbol dvb_register_frontend [ 2003.361554] em28xx_dvb: Unknown symbol dvb_unregister_adapter [ 2003.361653] em28xx_dvb: Unknown symbol dvb_dmx_init [ 2003.362770] em28xx_audioep: Unknown symbol snd_pcm_new [ 2003.362872] em28xx_audioep: Unknown symbol snd_card_register [ 2003.362973] em28xx_audioep: Unknown symbol snd_card_free [ 2003.363375] em28xx_audioep: Unknown symbol snd_card_new [ 2003.363479] em28xx_audioep: Unknown symbol snd_pcm_lib_ioctl [ 2003.363659] em28xx_audioep: Unknown symbol snd_pcm_set_ops [ 2003.363843] em28xx_audioep: Unknown symbol snd_pcm_hw_constraint_integer [ 2003.364044] em28xx_audioep: Unknown symbol snd_pcm_period_elapsed [ 2038.162200] pcmcia_socket pcmcia_socket0: pccard: card ejected from
slot 0
As you can see, there were several problems, I'll explain them a little bit further: first of all a lot of unresolved symbols which are part of ALSA itself (snd_* ones.) This is perfectly valid and true since I don't use ALSA but OSS, however, using the provided modules seems not to be working without ALSA - bummer deal... I'd appreciate any help here (other than "switch to ALSA" rants, of course, which are not very productive!)
Secondly, there are a lot of unresolved dvb* symbol errors personally I can not explain.
After this episode of failing I wanted to give LinuxTV.org's v4l-dvb tree a shot... once again had all installed v4l and dvb modules removed (module-wise out of the Kernel as well as file-wise on the harddisk of course), checked out the other repo, built the modules, installed them, re-inserted the card.
This time I got the following new errors, but at least not the old ones:
[ 2197.245488] cx88xx: Unknown symbol i2c_bit_add_bus [ 2197.251385] cx8800: Unknown symbol cx88_reset [ 2197.251672] cx8800: Unknown symbol cx88_call_i2c_clients [ 2197.251774] cx8800: Unknown symbol cx88_wakeup [ 2197.251904] cx8800: Unknown symbol cx88_risc_stopper [ 2197.260330] cx8800: Unknown symbol cx88_print_irqbits [ 2197.260435] cx8800: Unknown symbol cx88_set_scale [ 2197.260567] cx8800: Unknown symbol cx88_shutdown [ 2197.260763] cx8800: Unknown symbol cx88_vdev_init [ 2197.260913] cx8800: Unknown symbol cx88_core_put [ 2197.261231] cx8800: Unknown symbol cx88_audio_thread [ 2197.261479] cx8800: Unknown symbol cx88_core_irq [ 2197.261614] cx8800: Unknown symbol cx88_core_get [ 2197.261715] cx8800: Unknown symbol cx88_get_stereo [ 2197.261816] cx8800: Unknown symbol cx88_ir_stop [ 2197.262195] cx8800: Unknown symbol cx88_set_tvnorm [ 2197.262297] cx8800: Unknown symbol cx88_ir_start [ 2197.262705] cx8800: Unknown symbol cx88_risc_buffer [ 2197.263412] cx8800: Unknown symbol cx88_set_stereo [ 2197.263882] cx8800: Unknown symbol cx88_sram_channels [ 2197.264169] cx8800: Unknown symbol cx88_set_tvaudio [ 2197.264271] cx8800: Unknown symbol cx88_sram_channel_dump [ 2197.264406] cx8800: Unknown symbol cx88_sram_channel_setup [ 2197.264612] cx8800: Unknown symbol cx88_free_buffer [ 2197.265458] cx8800: Unknown symbol cx88_newstation [ 2197.276698] cx88xx: Unknown symbol i2c_bit_add_bus [ 2197.289372] cx8802: Unknown symbol cx88_reset [ 2197.289474] cx8802: Unknown symbol cx88_wakeup [ 2197.289605] cx8802: Unknown symbol cx88_risc_stopper [ 2197.289736] cx8802: Unknown symbol cx88_print_irqbits [ 2197.289866] cx8802: Unknown symbol cx88_shutdown [ 2197.289984] cx8802: Unknown symbol cx88_core_put [ 2197.290382] cx8802: Unknown symbol cx88_core_irq [ 2197.290513] cx8802: Unknown symbol cx88_core_get [ 2197.290792] cx8802: Unknown symbol cx88_sram_channels [ 2197.290893] cx8802: Unknown symbol cx88_sram_channel_dump [ 2197.290997] cx8802: Unknown symbol cx88_sram_channel_setup [ 2197.291381] cx8802: Unknown symbol cx88_free_buffer [ 2197.291589] cx8802: Unknown symbol cx88_risc_databuffer
I thought I had to remove any in-kernel driver before using the v4l-dvb tree, but obviously this was wrong... however, after installing the in-kernel cx88 module as well, I got the following result:
[ 4734.289076] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 4734.289113] cx8800 0000:07:00.0: enabling device (0000 -> 0002) [ 4734.289123] cx8800 0000:07:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4734.306537] cx88[0]: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60,autodetected], frontend(s): 1 [ 4734.306541] cx88[0]: TV tuner type 71, Radio tuner type 71 [ 4734.317119] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 4734.428129] tuner' 4-0061: chip found @ 0xc2 (cx88[0]) [ 4734.525243] xc2028 4-0061: creating new instance [ 4734.525247] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.525254] xc2028 4-0061: destroying instance [ 4734.525345] xc2028 4-0061: creating new instance [ 4734.525347] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.525350] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 4734.525365] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 22, latency: 0, mmio: 0x8c000000 [ 4734.525375] cx8800 0000:07:00.0: setting latency timer to 64 [ 4734.525530] cx88[0]/0: registered device video0 [v4l2] [ 4734.525564] cx88[0]/0: registered device vbi0 [ 4734.525596] cx88[0]/0: registered device radio0 [ 4734.525685] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.529919] xc2028 4-0061: Error: firmware xc3028-v27.fw not found. [ 4734.530152] cx88[0]/2: cx2388x 8802 Driver Manager [ 4734.530165] cx88-mpeg driver manager 0000:07:00.2: enabling device (0000 -> 0002) [ 4734.530175] cx88-mpeg driver manager 0000:07:00.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4734.530184] cx88-mpeg driver manager 0000:07:00.2: setting latency timer to 64 [ 4734.530193] cx88[0]/2: found at 0000:07:00.2, rev: 5, irq: 22, latency: 64, mmio: 0x8e000000 [ 4734.594309] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 4734.594313] cx88/2: registering cx8802 driver, type: dvb access: shared [ 4734.594316] cx88[0]/2: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60] [ 4734.594319] cx88[0]/2: cx2388x based DVB/ATSC card [ 4734.594321] cx8802_alloc_frontends() allocating 1 frontend(s) [ 4734.598305] xc2028 4-0061: attaching existing instance [ 4734.598308] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.598310] cx88[0]/2: xc3028 attached [ 4734.598317] DVB: registering new adapter (cx88[0]) [ 4734.598320] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 4734.608466] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.626640] xc2028 4-0061: Error: firmware xc3028-v27.fw not found.
Lazy people just scrolling by, reading the beginning and the end of those dmesg messages might have spotted the problem already, which particularly is:
[ 4734.608466] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.626640] xc2028 4-0061: Error: firmware xc3028-v27.fw not found.
This indicates that I seem to miss this firmware file. However, once again the Wiki article suggests using the firmware driver package for Pinnacle from this site: http://mcentral.de/firmware/
This package does not include the requested file and I haven't seen it around doing a Google recherche either... but I found some web pages with other dmesg output revealing that actually the requested file is not the file to be used with my card but instead the xc3028_init0.i2c.fw file...
Am I using the wrong drivers? What's happening? I'm quite a bit sad and depressed despite Marvin not being my name... err, actually I have no idea how I can get this card working...
Anybody around here knowing any helpful hints?
I hope I didn't forgot any information.
Best regards,
Mihai
P.S.: I have added the people mentioned on the wiki page as CC's, I hope this is OK for you guys and the email addresses are still valid... well... one never knows.
Quoted 189 lines · Mihai Moldovan
Hello readers,
Amazon just had this card transported to me today... and of course I gave the in-kernel 2.6.28.7 drivers a shot, but it didn't work out at all, so I thought giving the repo provided in the wiki article (for reference:
http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_Hybrid_Pro_Card_%28310c%29)
would be a good idea.Thus, I removed every in-kernel tuner and DVB module, checked the repo out, build the new modules and had them installed. This, however, yielded following results (dmesg extract):
[ 1988.812035] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 1988.812102] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0xffffff] [ 1988.812225] pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0xffffff] [ 1988.812341] pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0xffffff] [ 2003.326837] cx25843.c: starting probe for adapter SMBus I801 adapter at 18e0 (0x40004) [ 2003.328060] cx25843.c: detecting cx25843 client on address 0x88 [ 2003.328090] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.328511] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.328961] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.335211] em28xx: Unknown symbol v4l_compat_translate_ioctl [ 2003.335404] em28xx: Unknown symbol v4l2_video_std_construct [ 2003.335850] em28xx: Unknown symbol v4l2_type_names [ 2003.339965] em28xx: Unknown symbol v4l_printk_ioctl [ 2003.340663] em28xx: Unknown symbol video_unregister_device [ 2003.340851] em28xx: Unknown symbol video_device_alloc [ 2003.340948] em28xx: Unknown symbol video_register_device [ 2003.342372] em28xx: Unknown symbol video_usercopy [ 2003.342470] em28xx: Unknown symbol video_device_release [ 2003.352874] em28xx_audio: Unknown symbol em28xx_i2c_call_clients [ 2003.353305] em28xx_audio: Unknown symbol snd_pcm_new [ 2003.353407] em28xx_audio: Unknown symbol snd_card_register [ 2003.353508] em28xx_audio: Unknown symbol snd_card_free [ 2003.353683] em28xx_audio: Unknown symbol snd_component_add [ 2003.353873] em28xx_audio: Unknown symbol snd_card_new [ 2003.353977] em28xx_audio: Unknown symbol snd_pcm_lib_ioctl [ 2003.354280] em28xx_audio: Unknown symbol em28xx_unregister_extension [ 2003.354465] em28xx_audio: Unknown symbol snd_pcm_set_ops [ 2003.354570] em28xx_audio: Unknown symbol snd_pcm_hw_constraint_integer [ 2003.354691] em28xx_audio: Unknown symbol em28xx_register_extension [ 2003.354910] em28xx_audio: Unknown symbol snd_pcm_period_elapsed [ 2003.357625] em28xx_aad: Unknown symbol em28xx_unregister_extension [ 2003.357753] em28xx_aad: Unknown symbol em28xx_register_extension [ 2003.358895] em28xx_dvb: Unknown symbol dvb_dmxdev_init [ 2003.359262] em28xx_dvb: Unknown symbol dvb_register_adapter [ 2003.359506] em28xx_dvb: Unknown symbol dvb_dmx_release [ 2003.359602] em28xx_dvb: Unknown symbol em28xx_unregister_extension [ 2003.359787] em28xx_dvb: Unknown symbol dvb_net_init [ 2003.359886] em28xx_dvb: Unknown symbol dvb_dmx_swfilter [ 2003.360514] em28xx_dvb: Unknown symbol dvb_dmxdev_release [ 2003.360638] em28xx_dvb: Unknown symbol dvb_frontend_detach [ 2003.360737] em28xx_dvb: Unknown symbol dvb_net_release [ 2003.360898] em28xx_dvb: Unknown symbol em28xx_register_extension [ 2003.361189] em28xx_dvb: Unknown symbol dvb_unregister_frontend [ 2003.361455] em28xx_dvb: Unknown symbol dvb_register_frontend [ 2003.361554] em28xx_dvb: Unknown symbol dvb_unregister_adapter [ 2003.361653] em28xx_dvb: Unknown symbol dvb_dmx_init [ 2003.362770] em28xx_audioep: Unknown symbol snd_pcm_new [ 2003.362872] em28xx_audioep: Unknown symbol snd_card_register [ 2003.362973] em28xx_audioep: Unknown symbol snd_card_free [ 2003.363375] em28xx_audioep: Unknown symbol snd_card_new [ 2003.363479] em28xx_audioep: Unknown symbol snd_pcm_lib_ioctl [ 2003.363659] em28xx_audioep: Unknown symbol snd_pcm_set_ops [ 2003.363843] em28xx_audioep: Unknown symbol snd_pcm_hw_constraint_integer [ 2003.364044] em28xx_audioep: Unknown symbol snd_pcm_period_elapsed [ 2038.162200] pcmcia_socket pcmcia_socket0: pccard: card ejected fromslot 0
As you can see, there were several problems, I'll explain them a little bit further: first of all a lot of unresolved symbols which are part of ALSA itself (snd_* ones.) This is perfectly valid and true since I don't use ALSA but OSS, however, using the provided modules seems not to be working without ALSA - bummer deal... I'd appreciate any help here (other than "switch to ALSA" rants, of course, which are not very productive!)
Secondly, there are a lot of unresolved dvb* symbol errors personally I can not explain.
After this episode of failing I wanted to give LinuxTV.org's v4l-dvb tree a shot... once again had all installed v4l and dvb modules removed (module-wise out of the Kernel as well as file-wise on the harddisk of course), checked out the other repo, built the modules, installed them, re-inserted the card.
This time I got the following new errors, but at least not the old ones:
[ 2197.245488] cx88xx: Unknown symbol i2c_bit_add_bus [ 2197.251385] cx8800: Unknown symbol cx88_reset [ 2197.251672] cx8800: Unknown symbol cx88_call_i2c_clients [ 2197.251774] cx8800: Unknown symbol cx88_wakeup [ 2197.251904] cx8800: Unknown symbol cx88_risc_stopper [ 2197.260330] cx8800: Unknown symbol cx88_print_irqbits [ 2197.260435] cx8800: Unknown symbol cx88_set_scale [ 2197.260567] cx8800: Unknown symbol cx88_shutdown [ 2197.260763] cx8800: Unknown symbol cx88_vdev_init [ 2197.260913] cx8800: Unknown symbol cx88_core_put [ 2197.261231] cx8800: Unknown symbol cx88_audio_thread [ 2197.261479] cx8800: Unknown symbol cx88_core_irq [ 2197.261614] cx8800: Unknown symbol cx88_core_get [ 2197.261715] cx8800: Unknown symbol cx88_get_stereo [ 2197.261816] cx8800: Unknown symbol cx88_ir_stop [ 2197.262195] cx8800: Unknown symbol cx88_set_tvnorm [ 2197.262297] cx8800: Unknown symbol cx88_ir_start [ 2197.262705] cx8800: Unknown symbol cx88_risc_buffer [ 2197.263412] cx8800: Unknown symbol cx88_set_stereo [ 2197.263882] cx8800: Unknown symbol cx88_sram_channels [ 2197.264169] cx8800: Unknown symbol cx88_set_tvaudio [ 2197.264271] cx8800: Unknown symbol cx88_sram_channel_dump [ 2197.264406] cx8800: Unknown symbol cx88_sram_channel_setup [ 2197.264612] cx8800: Unknown symbol cx88_free_buffer [ 2197.265458] cx8800: Unknown symbol cx88_newstation [ 2197.276698] cx88xx: Unknown symbol i2c_bit_add_bus [ 2197.289372] cx8802: Unknown symbol cx88_reset [ 2197.289474] cx8802: Unknown symbol cx88_wakeup [ 2197.289605] cx8802: Unknown symbol cx88_risc_stopper [ 2197.289736] cx8802: Unknown symbol cx88_print_irqbits [ 2197.289866] cx8802: Unknown symbol cx88_shutdown [ 2197.289984] cx8802: Unknown symbol cx88_core_put [ 2197.290382] cx8802: Unknown symbol cx88_core_irq [ 2197.290513] cx8802: Unknown symbol cx88_core_get [ 2197.290792] cx8802: Unknown symbol cx88_sram_channels [ 2197.290893] cx8802: Unknown symbol cx88_sram_channel_dump [ 2197.290997] cx8802: Unknown symbol cx88_sram_channel_setup [ 2197.291381] cx8802: Unknown symbol cx88_free_buffer [ 2197.291589] cx8802: Unknown symbol cx88_risc_databufferI thought I had to remove any in-kernel driver before using the v4l-dvb tree, but obviously this was wrong... however, after installing the in-kernel cx88 module as well, I got the following result:
[ 4734.289076] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 4734.289113] cx8800 0000:07:00.0: enabling device (0000 -> 0002) [ 4734.289123] cx8800 0000:07:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4734.306537] cx88[0]: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60,autodetected], frontend(s): 1 [ 4734.306541] cx88[0]: TV tuner type 71, Radio tuner type 71 [ 4734.317119] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 4734.428129] tuner' 4-0061: chip found @ 0xc2 (cx88[0]) [ 4734.525243] xc2028 4-0061: creating new instance [ 4734.525247] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.525254] xc2028 4-0061: destroying instance [ 4734.525345] xc2028 4-0061: creating new instance [ 4734.525347] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.525350] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 4734.525365] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 22, latency: 0, mmio: 0x8c000000 [ 4734.525375] cx8800 0000:07:00.0: setting latency timer to 64 [ 4734.525530] cx88[0]/0: registered device video0 [v4l2] [ 4734.525564] cx88[0]/0: registered device vbi0 [ 4734.525596] cx88[0]/0: registered device radio0 [ 4734.525685] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.529919] xc2028 4-0061: Error: firmware xc3028-v27.fw not found. [ 4734.530152] cx88[0]/2: cx2388x 8802 Driver Manager [ 4734.530165] cx88-mpeg driver manager 0000:07:00.2: enabling device (0000 -> 0002) [ 4734.530175] cx88-mpeg driver manager 0000:07:00.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4734.530184] cx88-mpeg driver manager 0000:07:00.2: setting latency timer to 64 [ 4734.530193] cx88[0]/2: found at 0000:07:00.2, rev: 5, irq: 22, latency: 64, mmio: 0x8e000000 [ 4734.594309] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 4734.594313] cx88/2: registering cx8802 driver, type: dvb access: shared [ 4734.594316] cx88[0]/2: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60] [ 4734.594319] cx88[0]/2: cx2388x based DVB/ATSC card [ 4734.594321] cx8802_alloc_frontends() allocating 1 frontend(s) [ 4734.598305] xc2028 4-0061: attaching existing instance [ 4734.598308] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.598310] cx88[0]/2: xc3028 attached [ 4734.598317] DVB: registering new adapter (cx88[0]) [ 4734.598320] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 4734.608466] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.626640] xc2028 4-0061: Error: firmware xc3028-v27.fw not found.Lazy people just scrolling by, reading the beginning and the end of those dmesg messages might have spotted the problem already, which particularly is:
Quoted 7 lines
[ 4734.608466] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.626640] xc2028 4-0061: Error: firmware xc3028-v27.fw not found.This indicates that I seem to miss this firmware file. However, once again the Wiki article suggests using the firmware driver package for Pinnacle from this site: http://mcentral.de/firmware/
I use to build the firwmare into the drivers which are in userland nowadays. There are no drivers(sources) available which require any *external* firmware from mcentral.de anymore.
regards,
Markus
Quoted 200 lines · * On 15.03.2009 00:41, Markus Rechberger wrote:
Quoted 189 lines · Mihai Moldovan
Hello readers,
Amazon just had this card transported to me today... and of course I gave the in-kernel 2.6.28.7 drivers a shot, but it didn't work out at all, so I thought giving the repo provided in the wiki article (for reference:
http://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_Hybrid_Pro_Card_%28310c%29)
would be a good idea.Thus, I removed every in-kernel tuner and DVB module, checked the repo out, build the new modules and had them installed. This, however, yielded following results (dmesg extract):
[ 1988.812035] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 1988.812102] pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0xffffff] [ 1988.812225] pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0xffffff] [ 1988.812341] pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0xffffff] [ 2003.326837] cx25843.c: starting probe for adapter SMBus I801 adapter at 18e0 (0x40004) [ 2003.328060] cx25843.c: detecting cx25843 client on address 0x88 [ 2003.328090] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.328511] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.328961] cx25843.c: starting probe for adapter NVIDIA i2c adapter (0x0) [ 2003.335211] em28xx: Unknown symbol v4l_compat_translate_ioctl [ 2003.335404] em28xx: Unknown symbol v4l2_video_std_construct [ 2003.335850] em28xx: Unknown symbol v4l2_type_names [ 2003.339965] em28xx: Unknown symbol v4l_printk_ioctl [ 2003.340663] em28xx: Unknown symbol video_unregister_device [ 2003.340851] em28xx: Unknown symbol video_device_alloc [ 2003.340948] em28xx: Unknown symbol video_register_device [ 2003.342372] em28xx: Unknown symbol video_usercopy [ 2003.342470] em28xx: Unknown symbol video_device_release [ 2003.352874] em28xx_audio: Unknown symbol em28xx_i2c_call_clients [ 2003.353305] em28xx_audio: Unknown symbol snd_pcm_new [ 2003.353407] em28xx_audio: Unknown symbol snd_card_register [ 2003.353508] em28xx_audio: Unknown symbol snd_card_free [ 2003.353683] em28xx_audio: Unknown symbol snd_component_add [ 2003.353873] em28xx_audio: Unknown symbol snd_card_new [ 2003.353977] em28xx_audio: Unknown symbol snd_pcm_lib_ioctl [ 2003.354280] em28xx_audio: Unknown symbol em28xx_unregister_extension [ 2003.354465] em28xx_audio: Unknown symbol snd_pcm_set_ops [ 2003.354570] em28xx_audio: Unknown symbol snd_pcm_hw_constraint_integer [ 2003.354691] em28xx_audio: Unknown symbol em28xx_register_extension [ 2003.354910] em28xx_audio: Unknown symbol snd_pcm_period_elapsed [ 2003.357625] em28xx_aad: Unknown symbol em28xx_unregister_extension [ 2003.357753] em28xx_aad: Unknown symbol em28xx_register_extension [ 2003.358895] em28xx_dvb: Unknown symbol dvb_dmxdev_init [ 2003.359262] em28xx_dvb: Unknown symbol dvb_register_adapter [ 2003.359506] em28xx_dvb: Unknown symbol dvb_dmx_release [ 2003.359602] em28xx_dvb: Unknown symbol em28xx_unregister_extension [ 2003.359787] em28xx_dvb: Unknown symbol dvb_net_init [ 2003.359886] em28xx_dvb: Unknown symbol dvb_dmx_swfilter [ 2003.360514] em28xx_dvb: Unknown symbol dvb_dmxdev_release [ 2003.360638] em28xx_dvb: Unknown symbol dvb_frontend_detach [ 2003.360737] em28xx_dvb: Unknown symbol dvb_net_release [ 2003.360898] em28xx_dvb: Unknown symbol em28xx_register_extension [ 2003.361189] em28xx_dvb: Unknown symbol dvb_unregister_frontend [ 2003.361455] em28xx_dvb: Unknown symbol dvb_register_frontend [ 2003.361554] em28xx_dvb: Unknown symbol dvb_unregister_adapter [ 2003.361653] em28xx_dvb: Unknown symbol dvb_dmx_init [ 2003.362770] em28xx_audioep: Unknown symbol snd_pcm_new [ 2003.362872] em28xx_audioep: Unknown symbol snd_card_register [ 2003.362973] em28xx_audioep: Unknown symbol snd_card_free [ 2003.363375] em28xx_audioep: Unknown symbol snd_card_new [ 2003.363479] em28xx_audioep: Unknown symbol snd_pcm_lib_ioctl [ 2003.363659] em28xx_audioep: Unknown symbol snd_pcm_set_ops [ 2003.363843] em28xx_audioep: Unknown symbol snd_pcm_hw_constraint_integer [ 2003.364044] em28xx_audioep: Unknown symbol snd_pcm_period_elapsed [ 2038.162200] pcmcia_socket pcmcia_socket0: pccard: card ejected fromslot 0
As you can see, there were several problems, I'll explain them a little bit further: first of all a lot of unresolved symbols which are part of ALSA itself (snd_* ones.) This is perfectly valid and true since I don't use ALSA but OSS, however, using the provided modules seems not to be working without ALSA - bummer deal... I'd appreciate any help here (other than "switch to ALSA" rants, of course, which are not very productive!)
Secondly, there are a lot of unresolved dvb* symbol errors personally I can not explain.
After this episode of failing I wanted to give LinuxTV.org's v4l-dvb tree a shot... once again had all installed v4l and dvb modules removed (module-wise out of the Kernel as well as file-wise on the harddisk of course), checked out the other repo, built the modules, installed them, re-inserted the card.
This time I got the following new errors, but at least not the old ones:
[ 2197.245488] cx88xx: Unknown symbol i2c_bit_add_bus [ 2197.251385] cx8800: Unknown symbol cx88_reset [ 2197.251672] cx8800: Unknown symbol cx88_call_i2c_clients [ 2197.251774] cx8800: Unknown symbol cx88_wakeup [ 2197.251904] cx8800: Unknown symbol cx88_risc_stopper [ 2197.260330] cx8800: Unknown symbol cx88_print_irqbits [ 2197.260435] cx8800: Unknown symbol cx88_set_scale [ 2197.260567] cx8800: Unknown symbol cx88_shutdown [ 2197.260763] cx8800: Unknown symbol cx88_vdev_init [ 2197.260913] cx8800: Unknown symbol cx88_core_put [ 2197.261231] cx8800: Unknown symbol cx88_audio_thread [ 2197.261479] cx8800: Unknown symbol cx88_core_irq [ 2197.261614] cx8800: Unknown symbol cx88_core_get [ 2197.261715] cx8800: Unknown symbol cx88_get_stereo [ 2197.261816] cx8800: Unknown symbol cx88_ir_stop [ 2197.262195] cx8800: Unknown symbol cx88_set_tvnorm [ 2197.262297] cx8800: Unknown symbol cx88_ir_start [ 2197.262705] cx8800: Unknown symbol cx88_risc_buffer [ 2197.263412] cx8800: Unknown symbol cx88_set_stereo [ 2197.263882] cx8800: Unknown symbol cx88_sram_channels [ 2197.264169] cx8800: Unknown symbol cx88_set_tvaudio [ 2197.264271] cx8800: Unknown symbol cx88_sram_channel_dump [ 2197.264406] cx8800: Unknown symbol cx88_sram_channel_setup [ 2197.264612] cx8800: Unknown symbol cx88_free_buffer [ 2197.265458] cx8800: Unknown symbol cx88_newstation [ 2197.276698] cx88xx: Unknown symbol i2c_bit_add_bus [ 2197.289372] cx8802: Unknown symbol cx88_reset [ 2197.289474] cx8802: Unknown symbol cx88_wakeup [ 2197.289605] cx8802: Unknown symbol cx88_risc_stopper [ 2197.289736] cx8802: Unknown symbol cx88_print_irqbits [ 2197.289866] cx8802: Unknown symbol cx88_shutdown [ 2197.289984] cx8802: Unknown symbol cx88_core_put [ 2197.290382] cx8802: Unknown symbol cx88_core_irq [ 2197.290513] cx8802: Unknown symbol cx88_core_get [ 2197.290792] cx8802: Unknown symbol cx88_sram_channels [ 2197.290893] cx8802: Unknown symbol cx88_sram_channel_dump [ 2197.290997] cx8802: Unknown symbol cx88_sram_channel_setup [ 2197.291381] cx8802: Unknown symbol cx88_free_buffer [ 2197.291589] cx8802: Unknown symbol cx88_risc_databufferI thought I had to remove any in-kernel driver before using the v4l-dvb tree, but obviously this was wrong... however, after installing the in-kernel cx88 module as well, I got the following result:
[ 4734.289076] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 4734.289113] cx8800 0000:07:00.0: enabling device (0000 -> 0002) [ 4734.289123] cx8800 0000:07:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4734.306537] cx88[0]: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60,autodetected], frontend(s): 1 [ 4734.306541] cx88[0]: TV tuner type 71, Radio tuner type 71 [ 4734.317119] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 4734.428129] tuner' 4-0061: chip found @ 0xc2 (cx88[0]) [ 4734.525243] xc2028 4-0061: creating new instance [ 4734.525247] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.525254] xc2028 4-0061: destroying instance [ 4734.525345] xc2028 4-0061: creating new instance [ 4734.525347] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.525350] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [ 4734.525365] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 22, latency: 0, mmio: 0x8c000000 [ 4734.525375] cx8800 0000:07:00.0: setting latency timer to 64 [ 4734.525530] cx88[0]/0: registered device video0 [v4l2] [ 4734.525564] cx88[0]/0: registered device vbi0 [ 4734.525596] cx88[0]/0: registered device radio0 [ 4734.525685] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.529919] xc2028 4-0061: Error: firmware xc3028-v27.fw not found. [ 4734.530152] cx88[0]/2: cx2388x 8802 Driver Manager [ 4734.530165] cx88-mpeg driver manager 0000:07:00.2: enabling device (0000 -> 0002) [ 4734.530175] cx88-mpeg driver manager 0000:07:00.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4734.530184] cx88-mpeg driver manager 0000:07:00.2: setting latency timer to 64 [ 4734.530193] cx88[0]/2: found at 0000:07:00.2, rev: 5, irq: 22, latency: 64, mmio: 0x8e000000 [ 4734.594309] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 4734.594313] cx88/2: registering cx8802 driver, type: dvb access: shared [ 4734.594316] cx88[0]/2: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60] [ 4734.594319] cx88[0]/2: cx2388x based DVB/ATSC card [ 4734.594321] cx8802_alloc_frontends() allocating 1 frontend(s) [ 4734.598305] xc2028 4-0061: attaching existing instance [ 4734.598308] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [ 4734.598310] cx88[0]/2: xc3028 attached [ 4734.598317] DVB: registering new adapter (cx88[0]) [ 4734.598320] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... [ 4734.608466] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.626640] xc2028 4-0061: Error: firmware xc3028-v27.fw not found.Lazy people just scrolling by, reading the beginning and the end of those dmesg messages might have spotted the problem already, which particularly is:
Quoted 8 lines
[ 4734.608466] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [ 4734.626640] xc2028 4-0061: Error: firmware xc3028-v27.fw not found.This indicates that I seem to miss this firmware file. However, once again the Wiki article suggests using the firmware driver package for Pinnacle from this site: http://mcentral.de/firmware/
Quoted 4 lines
I use to build the firwmare into the drivers which are in userland nowadays. There are no drivers(sources) available which require any *external* firmware from mcentral.de anymore.
Hi Markus,
that's cool... but which tree is the one you actually do speak about? v4l-dvb-experimental? As stated... I've already tried it without any success. :(
Other than this I am out of ideas... but you could mean userspace-drivers though, is this the tree to go? The page the README file points to is outdated by the way...
When trying to compile all the stuff, I am getting this error messages:
sui userspace-drivers # ./build.sh
found kernel version (2.6.28.7-tuxonice-squashFS3.4-OSS4.1) make -C /lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/build M=/usr/src/Pinnacle/userspace-drivers/kernel modules -Wall make[1]: Entering directory `/usr/src/linux-2.6.28.7'
CC [M] /usr/src/Pinnacle/userspace-drivers/kernel/media-stub.o/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c: In Funktion »tuner_request_module«:/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:1466: Fehler:
Dereferenzierung eines Zeigers auf unvollständigen Typen /usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c: In Funktion »tuner_init«:/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:2208: Fehler:
Implizite Deklaration der Funktion »class_device_create« /usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:2208: Warnung:
Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung /usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c: In Funktion »tuner_exit«:/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:2218: Fehler:
Implizite Deklaration der Funktion »class_device_destroy« make[2]: *** [/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.o] Fehler 1
make[1]: *** [_module_/usr/src/Pinnacle/userspace-drivers/kernel] Fehler 2 make[1]: Leaving directory `/usr/src/linux-2.6.28.7'
make: *** [all] Fehler 2
make INSTALL_MOD_PATH= INSTALL_MOD_DIR=kernel/drivers/media/userspace \
-C /lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/buildM=/usr/src/Pinnacle/userspace-drivers/kernel modules_install make[1]: Entering directory `/usr/src/linux-2.6.28.7'
DEPMOD 2.6.28.7-tuxonice-squashFS3.4-OSS4.1
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol em28xx_i2c_call_clients
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_pcm_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_card_register
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_card_free
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_component_add
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_card_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_pcm_lib_ioctl
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_pcm_set_ops
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_pcm_hw_constraint_integer
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.ko needs unknown symbol snd_pcm_period_elapsed
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_pcm_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_card_register
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_card_free
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_card_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_pcm_lib_ioctl
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_pcm_set_ops
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_pcm_hw_constraint_integer
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.ko needs unknown symbol snd_pcm_period_elapsed
make[1]: Leaving directory `/usr/src/linux-2.6.28.7'
depmod -a
gcc -c media-core.c "-I/lib/modules/uname -r/source/include" gcc media-core.o tuner-qt1010.c -o tuner-qt1010 "-I/lib/modules/uname -r/source/include" -g
gcc media-core.o tuner-mt2060.c -o tuner-mt2060 "-I/lib/modules/uname -r/source/include" -g
gcc -shared media-core.c -o libmedia-core.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-core tuner-xc3028.c -o libtuner-xc3028.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-core demod-zl10353.c -o libdemod-zl10353.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -L. -lmedia-core demod-zl10353.c -o demod-zl10353 "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -L. -lmedia-core vdecoder-tvp5150.c -o vdecoder-tvp5150 "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-core vdecoder-tvp5150.c -o libvdec-tvp5150.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-core vdecoder-cx25840.c -o libvdec-cx25840.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-core demod-lgdt3304.c -o libdemod-lgdt3304.so "-I/lib/modules/uname -r/source/include" -fPIC -g
make[1]: Entering directory `/usr/src/Pinnacle/userspace-drivers/userspace/xc5000'
g++ XC5000_example_app.cpp i2c_driver.c xc5000_control.c -o test "-I/lib/modules/uname -r/source/include" -lmedia-core -L.. gcc -shared tuner-xc5000.c i2c_driver.c xc5000_control.c -o libtuner-xc5000.so -g -fPIC -lm "-I/lib/modules/uname -r/source/include" gcc tuner-xc5000.c i2c_driver.c xc5000_control.c -o tuner-xc5000 -g -L.. -lmedia-core -lm "-I/lib/modules/uname -r/source/include" make[1]: Leaving directory /usr/src/Pinnacle/userspace-drivers/userspace/xc5000' make[1]: Entering directory /usr/src/Pinnacle/userspace-drivers/userspace/drx3975d'
gcc drx3973d.c drx_dap_wasi.c bsp_host.c bsp_i2c.c drx_driver.c main.c -lmedia-core -L.. -DDRXD_TYPE_B -o test -lm -g "-I/lib/modules/uname -r/source/include"drx_dap_wasi.c: In Funktion »DRXDAP_WASI_WriteBlock«:
drx_dap_wasi.c:463: Warnung: Unverträgliche implizite Deklaration der eingebauten Funktion »printf«
gcc drx3973d.c drx_dap_wasi.c bsp_host.c bsp_i2c.c drx_driver.c demod-drx3975d.c -shared -DDRXD_TYPE_B -DDRXD_TYPE_A -fPIC -o libdemod-drx3975d.so -lm -L.. -lmedia-core -g "-I/lib/modules/uname -r/source/include"drx_dap_wasi.c: In Funktion »DRXDAP_WASI_WriteBlock«:
drx_dap_wasi.c:463: Warnung: Unverträgliche implizite Deklaration der eingebauten Funktion »printf«
make[1]: Leaving directory /usr/src/Pinnacle/userspace-drivers/userspace/drx3975d' make[1]: Entering directory /usr/src/Pinnacle/userspace-drivers/userspace/xc3028'
gcc xc3028_example_app.c -lm -o test
gcc tuner-xc3028.c -o tuner-xc3028 -g -L.. -lmedia-core -lm gcc -shared tuner-xc3028.c -o libtuner-xc3028.so -g -fPIC -lm make[1]: Leaving directory `/usr/src/Pinnacle/userspace-drivers/userspace/xc3028'
gcc media-daemon.c -L. -lmedia-core -ldl -o media-daemon "-I/lib/modules/uname -r/source/include" -g
mkdir -p //usr/sbin
mkdir -p //usr/lib
mkdir -p //usr/lib/v4l-dvb
install media-daemon //usr/sbin
cp libmedia-core.so //usr/lib
cp libtuner-xc3028.so //usr/lib/v4l-dvb
cp libdemod-zl10353.so //usr/lib/v4l-dvb
cp libvdec-tvp5150.so //usr/lib/v4l-dvb
cp libvdec-cx25840.so //usr/lib/v4l-dvb
cp libdemod-lgdt3304.so //usr/lib/v4l-dvb
cp xc5000/libtuner-xc5000.so //usr/lib/v4l-dvb
cp xc3028/libtuner-xc3028.so //usr/lib/v4l-dvb
cp drx3975d/libdemod-drx3975d.so //usr/lib/v4l-dvb
* WARNING: media-daemon has not yet been started.
Gentoo found
The latter ones are not fatal, but the first ones are, that said... tuner-stub won't be built at all (bad stuff...)
I did use the following GCC version: gcc (GCC) 4.1.2 20070214 ( (gdc 0.24, using dmd 1.020)) (Gentoo 4.1.2 p1.0.2)
Best regards,
Mihai
Quoted 6 lines
Hi Markus,
that's cool... but which tree is the one you actually do speak about? v4l-dvb-experimental? As stated... I've already tried it without any success. :(
this tree doesn't exist anymore it's just a symlink to the split out em28xx driver on mcentral.de
you should try your luck with the linuxtv.org/hg/v4l-dvb repository
Quoted 4 lines
Other than this I am out of ideas... but you could mean userspace-drivers though, is this the tree to go? The page the README file points to is outdated by the way...
those things are not relevant for your device, no drivers on mcentral.de are relevant for your device.
read your first dmesg log carefully and try to obtain the xc3028 firmware and put it to /lib/firmware
regards,
Markus
Quoted 173 lines
When trying to compile all the stuff, I am getting this error messages:
sui userspace-drivers # ./build.sh
found kernel version (2.6.28.7-tuxonice-squashFS3.4-OSS4.1) make -C/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/buildM=/usr/src/Pinnacle/userspace-drivers/kernel modules -Wall make[1]: Entering directory `/usr/src/linux-2.6.28.7'
CC [M] /usr/src/Pinnacle/userspace-drivers/kernel/media-stub.o/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c: In Funktion »tuner_request_module«:/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:1466: Fehler:
Dereferenzierung eines Zeigers auf unvollständigen Typen/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c: In Funktion »tuner_init«:/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:2208: Fehler:
Implizite Deklaration der Funktion »class_device_create«/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:2208: Warnung:
Zuweisung erzeugt Zeiger von Ganzzahl ohne Typkonvertierung/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c: In Funktion »tuner_exit«:/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.c:2218: Fehler:
Implizite Deklaration der Funktion »class_device_destroy« make[2]: *** [/usr/src/Pinnacle/userspace-drivers/kernel/media-stub.o] Fehler 1
make[1]: *** [_module_/usr/src/Pinnacle/userspace-drivers/kernel] Fehler 2 make[1]: Leaving directory `/usr/src/linux-2.6.28.7'
make: *** [all] Fehler 2
make INSTALL_MOD_PATH= INSTALL_MOD_DIR=kernel/drivers/media/userspace \
-C/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/buildM=/usr/src/Pinnacle/userspace-drivers/kernelmodules_installmake[1]: Entering directory `/usr/src/linux-2.6.28.7'
DEPMOD 2.6.28.7-tuxonice-squashFS3.4-OSS4.1
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolem28xx_i2c_call_clients
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_pcm_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_card_register
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_card_free
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_component_add
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_card_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_pcm_lib_ioctl
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_pcm_set_ops
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_pcm_hw_constraint_integer
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audio.koneeds unknown symbolsnd_pcm_period_elapsed
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_pcm_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_card_register
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_card_free
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_card_new
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_pcm_lib_ioctl
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_pcm_set_ops
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_pcm_hw_constraint_integer
WARNING:/lib/modules/2.6.28.7-tuxonice-squashFS3.4-OSS4.1/empia/em28xx-audioep.koneeds unknown symbolsnd_pcm_period_elapsed
make[1]: Leaving directory `/usr/src/linux-2.6.28.7'
depmod -a
gcc -cmedia-core.c"-I/lib/modules/uname -r/source/include" gcc media-core.otuner-qt1010.c-o tuner-qt1010 "-I/lib/modules/uname -r/source/include" -g
gcc media-core.otuner-mt2060.c-o tuner-mt2060 "-I/lib/modules/uname -r/source/include" -g
gcc -sharedmedia-core.c-o libmedia-core.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-coretuner-xc3028.c-o libtuner-xc3028.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-coredemod-zl10353.c-o libdemod-zl10353.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -L. -lmedia-coredemod-zl10353.c-o demod-zl10353 "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -L. -lmedia-corevdecoder-tvp5150.c-o vdecoder-tvp5150 "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-corevdecoder-tvp5150.c-o libvdec-tvp5150.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-corevdecoder-cx25840.c-o libvdec-cx25840.so "-I/lib/modules/uname -r/source/include" -fPIC -g
gcc -shared -L. -lmedia-coredemod-lgdt3304.c-o libdemod-lgdt3304.so "-I/lib/modules/uname -r/source/include" -fPIC -g
make[1]: Entering directory `/usr/src/Pinnacle/userspace-drivers/userspace/xc5000'
g++ XC5000_example_app.cppi2c_driver.cxc5000_control.c-o test "-I/lib/modules/uname -r/source/include" -lmedia-core -L.. gcc -sharedtuner-xc5000.ci2c_driver.cxc5000_control.c-o libtuner-xc5000.so -g -fPIC -lm "-I/lib/modules/uname -r/source/include" gcctuner-xc5000.ci2c_driver.cxc5000_control.c-o tuner-xc5000 -g -L.. -lmedia-core -lm "-I/lib/modules/uname -r/source/include" make[1]: Leaving directory/usr/src/Pinnacle/userspace-drivers/userspace/xc5000' make[1]: Entering directory/usr/src/Pinnacle/userspace-drivers/userspace/drx3975d'
gccdrx3973d.cdrx_dap_wasi.cbsp_host.cbsp_i2c.cdrx_driver.cmain.c(quoted diff) +0
-2-lmedia-core -L.. -DDRXD_TYPE_B -o test -lm -g "-I/lib/modules/`uname -r`/source/include"
drx_dap_wasi.c: In Funktion »DRXDAP_WASI_WriteBlock«:
drx_dap_wasi.c:463: Warnung: Unverträgliche implizite Deklaration der eingebauten Funktion »printf«
gccdrx3973d.cdrx_dap_wasi.cbsp_host.cbsp_i2c.cdrx_driver.cdemod-drx3975d.c-shared -DDRXD_TYPE_B -DDRXD_TYPE_A -fPIC -o libdemod-drx3975d.so -lm -L.. -lmedia-core -g "-I/lib/modules/uname -r/source/include"drx_dap_wasi.c: In Funktion »DRXDAP_WASI_WriteBlock«:
drx_dap_wasi.c:463: Warnung: Unverträgliche implizite Deklaration der eingebauten Funktion »printf«
make[1]: Leaving directory/usr/src/Pinnacle/userspace-drivers/userspace/drx3975d' make[1]: Entering directory/usr/src/Pinnacle/userspace-drivers/userspace/xc3028'
gccxc3028_example_app.c-lm -o test
gcctuner-xc3028.c-o tuner-xc3028 -g -L.. -lmedia-core -lm gcc -sharedtuner-xc3028.c-o libtuner-xc3028.so -g -fPIC -lm make[1]: Leaving directory `/usr/src/Pinnacle/userspace-drivers/userspace/xc3028'
gccmedia-daemon.c-L. -lmedia-core -ldl -o media-daemon "-I/lib/modules/uname -r/source/include" -g
mkdir -p //usr/sbin
mkdir -p //usr/lib
mkdir -p //usr/lib/v4l-dvb
install media-daemon //usr/sbin
cp libmedia-core.so //usr/lib
cp libtuner-xc3028.so //usr/lib/v4l-dvb
cp libdemod-zl10353.so //usr/lib/v4l-dvb
cp libvdec-tvp5150.so //usr/lib/v4l-dvb
cp libvdec-cx25840.so //usr/lib/v4l-dvb
cp libdemod-lgdt3304.so //usr/lib/v4l-dvb
cp xc5000/libtuner-xc5000.so //usr/lib/v4l-dvb
cp xc3028/libtuner-xc3028.so //usr/lib/v4l-dvb
cp drx3975d/libdemod-drx3975d.so //usr/lib/v4l-dvb
* WARNING: media-daemon has not yet been started.
Gentoo foundThe latter ones are not fatal, but the first ones are, that said... tuner-stub won't be built at all (bad stuff...)
I did use the following GCC version: gcc (GCC) 4.1.2 20070214 ( (gdc 0.24, using dmd 1.020)) (Gentoo 4.1.2 p1.0.2)
Best regards,
Mihai
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Quoted 10 lines · * On 15.03.2009 01:25, Markus Rechberger wrote:
Quoted 6 lines
Hi Markus,
that's cool... but which tree is the one you actually do speak about? v4l-dvb-experimental? As stated... I've already tried it without any success. :(
this tree doesn't exist anymore it's just a symlink to the split out em28xx driver on mcentral.de
you should try your luck with the linuxtv.org/hg/v4l-dvb repository
Okay, thank you!
Quoted 7 lines
Quoted 4 lines
Other than this I am out of ideas... but you could mean userspace-drivers though, is this the tree to go? The page the README file points to is outdated by the way...
those things are not relevant for your device, no drivers on mcentral.de are relevant for your device.
Interesting... thought they'd be the right drivers to get the device working due to the (possibly outdated) information on it's wiki page...
Quoted 2 lines
read your first dmesg log carefully and try to obtain the xc3028 firmware and put it to
/lib/firmwar
Well, that seems to be some sort of problem. I found this site (and several others during March, 14th)
http://lists-archives.org/video4linux/20835-extract-tool-for-xc3028-firmware.html
which shows how to extract the firmware file in question. It doesn't seem to fit my card though... I've done it anyways though.
No error messages printed by the drivers anymore, just the normal output:
[16398.130540] Linux video capture interface: v2.00 [16398.176622] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [16398.177500] cx88[0]: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60,autodetected], frontend(s): 1 [16398.177504] cx88[0]: TV tuner type 71, Radio tuner type 71 [16398.185553] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [16398.326195] tveeprom 4-0050: Huh, no eeprom present (err=-6)? [16398.326200] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [16398.326207] cx88[0]/2: cx2388x 8802 Driver Manager [16398.326221] cx88-mpeg driver manager 0000:07:00.2: enabling device (0000 -> 0002) [16398.326231] cx88-mpeg driver manager 0000:07:00.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [16398.326240] cx88-mpeg driver manager 0000:07:00.2: setting latency timer to 64 [16398.326249] cx88[0]/2: found at 0000:07:00.2, rev: 5, irq: 22, latency: 64, mmio: 0x8e000000 [16398.330880] cx8800 0000:07:00.0: enabling device (0000 -> 0002) [16398.330890] cx8800 0000:07:00.0: PCI INT A -> GSI 22 (level, low) - -> IRQ 22 [16398.330899] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 22, latency: 0, mmio: 0x8c000000 [16398.330908] cx8800 0000:07:00.0: setting latency timer to 64 [16398.331217] cx88[0]/0: registered device video0 [v4l2] [16398.331249] cx88[0]/0: registered device vbi0 [16398.331284] cx88[0]/0: registered device radio0 [16398.353479] cx88/2: cx2388x dvb driver version 0.0.6 loaded [16398.353483] cx88/2: registering cx8802 driver, type: dvb access: shared [16398.353486] cx88[0]/2: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60] [16398.353489] cx88[0]/2: cx2388x based DVB/ATSC card [16398.353491] cx8802_alloc_frontends() allocating 1 frontend(s) [16398.362618] xc2028 4-0061: creating new instance [16398.362621] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [16398.362624] cx88[0]/2: xc3028 attached [16398.362628] DVB: registering new adapter (cx88[0]) [16398.362632] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353
DVB-T)...
Here comes the interesting part, though: radio -s is finding no stations (this is not critical for me, but indicates some misbehavior) and dvbscan does only output "Unable to query frontend status" (Exit code 1.)
After running dvbcan, dmesg grows by following messages:
[16485.369819] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [16485.374523] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [16485.374629] cx88[0]: Calling XC2028/3028 callback [16485.374632] cx88[0]: setting GPIO to radio! [16487.371046] xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [16487.371053] cx88[0]: Calling XC2028/3028 callback [16487.371055] cx88[0]: setting GPIO to radio! [16491.995176] xc2028 4-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [16492.039958] xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [16492.080028] cx88[0]: Calling XC2028/3028 callback
I've also been curious about analog TV (which is my premier "want to get it working" aim)... with no luck. tvtime-scanner scanned and scanned and scanned without finding any station.
New messages after running tvtime-scanner:
[16491.995176] xc2028 4-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [16492.039958] xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [16492.080028] cx88[0]: Calling XC2028/3028 callback
So... I guess nothing is working sadly...
I'm really not sure whether the correct firmware is used. This HVR firmware file is said to be "generic" (more or less), but your firmware package for Pinnacle devices does include a lot of other firmware files which seem not to include this "*-v27.fw" file either...
Thank you once again for helping out.
Best regards,
Mihai
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iQIcBAEBCgAGBQJJvFeHAAoJEB/WLtluJTqHQFgP/2mDAgLz28No8YwGu5TMu3eN s//kEu2G3bUp3gwQ/ijz8C2GTMO8Ioei+ptwyELetet3gUK/yBs0xf5jLTldw2iz BkvOQ0P+nPKcHQ87eB21TmRxSZOunju9fjQc/euMOY625QCFqsw7z6pru77ATOC/ SpJHRVJpTrycFY6Xt67edO2URcrBJQuF+MDDkZhUec4CGMCxxxM/FmJ0KoohEMuI re1ci/Dh0untENo9Up4i1MkcpfUFQoKcXddZQj56FPovQFbmF7Wb2CoRToXnr6mR cVu3CTTJ64BKpBBqzq0nZu3bmvk5eo9Z3WpfvBZJ32d6umZzix53sOsSXk22Dko6 D2hg78va/kKBw5YJ+fvwZmlBOJingZkH78VkTgzVNvO8O6fH+jPm0w1tou3oExxg 6tKixARkDrwF4KiFEXsEaP/e0D+A6FvfsS1CL5DxSiXe7XDLoWPZ+RGjOdoKx1jX Y3PoWV1plVHkiZOz22mgnQUuO7et96/gxpWUXkugYqSgvgG4D2d/j0t1WsS2yCfw pdJEyGvtwrMpiuokrp28TRqUaeqZAGCYyJs0xIzvs1sdz//3yX0aBZvv7DrBlGoZ 3POk1vXjdi0ECj9SAg/cnHfyvmDijUbVTMd+aRpqz9xos2WG5FHvZj0jsCLDAreE oDAr1qlnvbXj78ySD/eQ
=SQzv
-----END PGP SIGNATURE-----
Please don't cc-flood (is that the correct way to name it?:)) your recipients ;)
To answer any questions that were posed at me, I have not been using the card much, but were able to get analog picture (no sound) with it using Ubuntu 8.10 stock kernel - I'm guessing 2.6.27 at the time.
I might give it a try some time, once dvb becomes more popular over here I believe.
Stay tuned.
Dnia 2009-03-15, nie o godzinie 02:19 +0100, Ionic pisze:
Quoted 141 lines
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512Quoted 10 lines · * On 15.03.2009 01:25, Markus Rechberger wrote:
Quoted 6 lines
Hi Markus,
that's cool... but which tree is the one you actually do speak about? v4l-dvb-experimental? As stated... I've already tried it without any success. :(
this tree doesn't exist anymore it's just a symlink to the split out em28xx driver on mcentral.de
you should try your luck with the linuxtv.org/hg/v4l-dvb repositoryOkay, thank you!
Quoted 7 lines
Quoted 4 lines
Other than this I am out of ideas... but you could mean userspace-drivers though, is this the tree to go? The page the README file points to is outdated by the way...
those things are not relevant for your device, no drivers on mcentral.de are relevant for your device.
Interesting... thought they'd be the right drivers to get the device working due to the (possibly outdated) information on it's wiki page...
Quoted 2 lines
read your first dmesg log carefully and try to obtain the xc3028 firmware and put it to
/lib/firmwarWell, that seems to be some sort of problem. I found this site (and several others during March, 14th)
http://lists-archives.org/video4linux/20835-extract-tool-for-xc3028-firmware.html
which shows how to extract the firmware file in question. It doesn't seem to fit my card though... I've done it anyways though.No error messages printed by the drivers anymore, just the normal output:
[16398.130540] Linux video capture interface: v2.00 [16398.176622] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [16398.177500] cx88[0]: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60,autodetected], frontend(s): 1 [16398.177504] cx88[0]: TV tuner type 71, Radio tuner type 71 [16398.185553] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [16398.326195] tveeprom 4-0050: Huh, no eeprom present (err=-6)? [16398.326200] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw [16398.326207] cx88[0]/2: cx2388x 8802 Driver Manager [16398.326221] cx88-mpeg driver manager 0000:07:00.2: enabling device (0000 -> 0002) [16398.326231] cx88-mpeg driver manager 0000:07:00.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [16398.326240] cx88-mpeg driver manager 0000:07:00.2: setting latency timer to 64 [16398.326249] cx88[0]/2: found at 0000:07:00.2, rev: 5, irq: 22, latency: 64, mmio: 0x8e000000 [16398.330880] cx8800 0000:07:00.0: enabling device (0000 -> 0002) [16398.330890] cx8800 0000:07:00.0: PCI INT A -> GSI 22 (level, low) - -> IRQ 22 [16398.330899] cx88[0]/0: found at 0000:07:00.0, rev: 5, irq: 22, latency: 0, mmio: 0x8c000000 [16398.330908] cx8800 0000:07:00.0: setting latency timer to 64 [16398.331217] cx88[0]/0: registered device video0 [v4l2] [16398.331249] cx88[0]/0: registered device vbi0 [16398.331284] cx88[0]/0: registered device radio0 [16398.353479] cx88/2: cx2388x dvb driver version 0.0.6 loaded [16398.353483] cx88/2: registering cx8802 driver, type: dvb access: shared [16398.353486] cx88[0]/2: subsystem: 12ab:1788, board: Pinnacle Hybrid PCTV [card=60] [16398.353489] cx88[0]/2: cx2388x based DVB/ATSC card [16398.353491] cx8802_alloc_frontends() allocating 1 frontend(s) [16398.362618] xc2028 4-0061: creating new instance [16398.362621] xc2028 4-0061: type set to XCeive xc2028/xc3028 tuner [16398.362624] cx88[0]/2: xc3028 attached [16398.362628] DVB: registering new adapter (cx88[0]) [16398.362632] DVB: registering adapter 0 frontend 0 (Zarlink ZL10353DVB-T)...
Here comes the interesting part, though: radio -s is finding no stations (this is not critical for me, but indicates some misbehavior) and dvbscan does only output "Unable to query frontend status" (Exit code 1.)
After running dvbcan, dmesg grows by following messages:
[16485.369819] i2c-adapter i2c-4: firmware: requesting xc3028-v27.fw [16485.374523] xc2028 4-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [16485.374629] cx88[0]: Calling XC2028/3028 callback [16485.374632] cx88[0]: setting GPIO to radio! [16487.371046] xc2028 4-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [16487.371053] cx88[0]: Calling XC2028/3028 callback [16487.371055] cx88[0]: setting GPIO to radio! [16491.995176] xc2028 4-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [16492.039958] xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [16492.080028] cx88[0]: Calling XC2028/3028 callbackI've also been curious about analog TV (which is my premier "want to get it working" aim)... with no luck. tvtime-scanner scanned and scanned and scanned without finding any station.
New messages after running tvtime-scanner:
[16491.995176] xc2028 4-0061: Loading firmware for type=D2633 DTV8 (210), id 0000000000000000. [16492.039958] xc2028 4-0061: Loading SCODE for type=DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 SCODE HAS_IF_4760 (620003e0), id 0000000000000000. [16492.080028] cx88[0]: Calling XC2028/3028 callbackSo... I guess nothing is working sadly...
I'm really not sure whether the correct firmware is used. This HVR firmware file is said to be "generic" (more or less), but your firmware package for Pinnacle devices does include a lot of other firmware files which seem not to include this "*-v27.fw" file either...
Thank you once again for helping out.
Best regards,
Mihai
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.orgiQIcBAEBCgAGBQJJvFeHAAoJEB/WLtluJTqHQFgP/2mDAgLz28No8YwGu5TMu3eN s//kEu2G3bUp3gwQ/ijz8C2GTMO8Ioei+ptwyELetet3gUK/yBs0xf5jLTldw2iz BkvOQ0P+nPKcHQ87eB21TmRxSZOunju9fjQc/euMOY625QCFqsw7z6pru77ATOC/ SpJHRVJpTrycFY6Xt67edO2URcrBJQuF+MDDkZhUec4CGMCxxxM/FmJ0KoohEMuI re1ci/Dh0untENo9Up4i1MkcpfUFQoKcXddZQj56FPovQFbmF7Wb2CoRToXnr6mR cVu3CTTJ64BKpBBqzq0nZu3bmvk5eo9Z3WpfvBZJ32d6umZzix53sOsSXk22Dko6 D2hg78va/kKBw5YJ+fvwZmlBOJingZkH78VkTgzVNvO8O6fH+jPm0w1tou3oExxg 6tKixARkDrwF4KiFEXsEaP/e0D+A6FvfsS1CL5DxSiXe7XDLoWPZ+RGjOdoKx1jX Y3PoWV1plVHkiZOz22mgnQUuO7et96/gxpWUXkugYqSgvgG4D2d/j0t1WsS2yCfw pdJEyGvtwrMpiuokrp28TRqUaeqZAGCYyJs0xIzvs1sdz//3yX0aBZvv7DrBlGoZ 3POk1vXjdi0ECj9SAg/cnHfyvmDijUbVTMd+aRpqz9xos2WG5FHvZj0jsCLDAreE oDAr1qlnvbXj78ySD/eQ
=SQzv
-----END PGP SIGNATURE-----
Signature · 3 lines
Mateusz Jędrasik <[email protected]> tel. +48(79)022-9393, +48(51)69-444-90 http://imachine.szklo.eu.org
Quoted 2 lines · * On 15.03.2009 03:03, Mateusz Jędrasik wrote:
Please don't cc-flood (is that the correct way to name it?:)) your
recipients ;)
Sorry, this has not been my intention. Still as far as I know, this is the preferred method on LKML (adding as many CCs as one thinks people could be or are involved into the problem in question.)
Quoted 4 lines
To answer any questions that were posed at me, I have not been using the card much, but were able to get analog picture (no sound)
with it using Ubuntu 8.10 stock kernel - I'm guessing 2.6.27 at
the time.
Cool, this would be a great start, really! I will switch to in-kernel drivers again, too (thought 2.6.28.7 ones.) Let's see whether this does work...
Quoted 2 lines
I might give it a try some time, once dvb becomes more popular over
here I believe.
Well, the zone I'm living in was the first area where DVB-T has been tested (somewhat around 1997 tests began IIRC.) Thus, we have a high rate of DVB-T broadcasting stations here and you are basically happy to watch DVB-T programmes nearly everywhere here.
Thus, I'd find having DVB-T working too would be AMAZING (I don't want to pay cable fees either.)
Quoted 1 line
Stay tuned.
But I cannot tune anything! ;-)
Best regards,
Mihai
Quoted 9 lines · * On 15.03.2009 11:34, I myself wrote:
Quoted 4 lines · * On 15.03.2009 03:03, Mateusz Jędrasik wrote:
To answer any questions that were posed at me, I have not been using the card much, but were able to get analog picture (no sound) with it using Ubuntu 8.10 stock kernel - I'm guessing 2.6.27 at the time.
Cool, this would be a great start, really! I will switch to in-kernel drivers again, too (thought 2.6.28.7 ones.) Let's see whether this does work...
Tried out the stock Kernel drivers and experienced following:
- DVB-T is working fine, at least with VLC... Kaffeine leaves the
card in an unusable state sometimes which can be only solved be re-plugging the card, really weird stuff...
- radio is still not working and it actually does break analog TV
output (obviously? Needs further investigation!)
- analog TV is working fine now in picture but the sound fails on
full scale - can this problem be addressed by anyone here? What exactly is wrong with it? I read about sound working with this usbaudio.sh script, but it's ALSA only... could OSS support be possibly integrated?
Quoted 3 lines
Quoted 1 line
Stay tuned.
But I cannot tune anything! ;-)
Done - tuned in correctly now. :-)
Best regards,
Mihai