ath5k: disable MIB interrupts
PATCH 1/2 ath5k: disable MIB interrupts
The MIB interrupt fires whenever counters overflow; however without support for automatic noise immunity, we can sometimes get an interrupt storm. The get_stats() callback reads the counters anyway so we can disable the interrupt for now until ANI is implemented. This fixes the issue reported in http://bugzilla.kernel.org/show_bug.cgi?id=12647.
Changes-licensed-under: 3-Clause-BSD
Signed-off-by Bob Copeland <[email protected]>
--- drivers/net/wireless/ath5k/base.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/net/wireless/ath5k/base.c +1 -1
@@ -2305,7 +2305,7 @@ ath5k_init(struct ath5k_softc *sc) sc->curband = &sc->sbands[sc->curchan->band]; sc->imask =AR5K_INT_RXOK |AR5K_INT_RXERR |AR5K_INT_RXEOL |AR5K_INT_RXORN |AR5K_INT_TXDESC |AR5K_INT_TXEOL | -AR5K_INT_FATAL |AR5K_INT_GLOBAL |AR5K_INT_MIB ; +AR5K_INT_FATAL |AR5K_INT_GLOBAL ; ret =ath5k_reset (sc, false, false);if (ret) goto done;
Signature · 1 line
1.6.0.6
PATCH 2/2 ath5k: remove dummy PCI "retry timeout" fix
Remove the PCI retry timeout code, for all the same reasons that Luis Rodriguez removed it for ath9k (wireless-testing commit 3149fde1bf083d32d5190cdc7f2bf8d0035966b1).
Changes-licensed-under: 3-Clause-BSD
Cc Luis Rodriguez <[email protected]>
Signed-off-by Bob Copeland <[email protected]>
--- drivers/net/wireless/ath5k/base.c | 7 ------- 1 files changed, 0 insertions(+), 7 deletions(-)
drivers/net/wireless/ath5k/base.c +0 -7
@@ -685,13 +685,6 @@ ath5k_pci_resume(struct pci_dev *pdev)if (err)return err; -/* -* Suspend/Resume resets the PCI configuration space, so we have to -* re-disable the RETRY_TIMEOUT register (0x41) to keep -* PCI Tx retries from interfering with C3 CPU state -*/ -pci_write_config_byte (pdev,0x41 ,0 ); - err =request_irq (pdev->irq, ath5k_intr,IRQF_SHARED ,"ath" , sc);if (err) {ATH5K_ERR (sc,"request_irq failed\n" );
Signature · 1 line
1.6.0.6