powerpc: Emulate enough of SPE instructions to make gcc happy
RFC PATCH 1/1 powerpc: Emulate enough of SPE instructions to make gcc happy
Based on patch from Edmar Wienskoski
---
I posting this to see if anyone would possibly use this support if it was in the stock kernel. It allows us to build and use e500/SPE toolchains on G5 HW.
- k
arch/powerpc/include/asm/processor.h | 6 +- arch/powerpc/kernel/traps.c | 60 +++++++++- arch/powerpc/math-emu/Makefile | 1 + arch/powerpc/math-emu/math_efp.c | 219 +++++++++++++++++++++++++++++++- arch/powerpc/platforms/Kconfig.cputype | 6 + 5 files changed, 286 insertions(+), 6 deletions(-)
arch/powerpc/include/asm/processor.h +3 -3
@@ -191,12 +191,12 @@ struct thread_struct {/* VSR status */ int used_vsr;/* set if process has used altivec */ #endif /* CONFIG_VSX */ -#ifdef CONFIG_SPE +#if defined(CONFIG_SPE ) || defined(CONFIG_SPE_EMULATION )unsigned long evr[32 ];/* upper 32-bits of SPE regs */ u64 acc;/* Accumulator */ unsigned long spefscr;/* SPE & eFP status */ int used_spe;/* set if process has used spe */ -#endif /* CONFIG_SPE */ +#endif /* CONFIG_SPE || CONFIG_SPE_EMULATION */ };#define ARCH_MIN_TASKALIGN 16
@@ -205,7 +205,7 @@ struct thread_struct {#define INIT_SP_LIMIT \ (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) -#ifdef CONFIG_SPE +#if defined(CONFIG_SPE ) || defined(CONFIG_SPE_EMULATION )#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,#else #define SPEFSCR_INIT
arch/powerpc/kernel/traps.c +58 -2
84 lines not on this page · raw message
arch/powerpc/math-emu/Makefile +1 -0
@@ -11,6 +11,7 @@ obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \ math.o fmr.o lfd.o stfd.o obj-$(CONFIG_SPE) += math_efp.o +obj-$(CONFIG_SPE_EMULATION) += math_efp.o CFLAGS_fabs.o = -fno-builtin-fabs CFLAGS_math.o = -fno-builtin-fabs
arch/powerpc/math-emu/math_efp.c +218 -1
337 lines not on this page · raw message
arch/powerpc/platforms/Kconfig.cputype +6 -0
@@ -169,6 +169,12 @@ config ALTIVEC If in doubt, say Y here. +config SPE_EMULATION + bool "SPE Emulation Support" + depends on (CLASSIC32 || POWER4) && !ALTIVEC && !SPE + ---help--- + This option enables kernel support for the Altivec extensions to the + config VSX bool "VSX Support" depends on POWER4 && ALTIVEC && PPC_FPU
Signature · 1 line
1.5.6.6
arch/powerpc/platforms/Kconfig.cputype config ALTIVEC · line 177
Quoted 6 lines · Kumar Gala
arch/powerpc/platforms/Kconfig.cputype +6
-0+config SPE_EMULATION + bool "SPE Emulation Support" + depends on (CLASSIC32 || POWER4) && !ALTIVEC && !SPE + ---help--- + This option enables kernel support for the Altivec extensions to the +
Looks like you kind of trailed off here... :)
cheers, Kyle
Quoted 10 lines · Kyle McMartin
Quoted 7 lines · Kumar Gala
arch/powerpc/platforms/Kconfig.cputype +5
-0+config SPE_EMULATION + bool "SPE Emulation Support" + depends on (CLASSIC32 || POWER4) && !ALTIVEC && !SPE + ---help--- + This option enables kernel support for the Altivec extensionsto the
+Looks like you kind of trailed off here... :)
Yeah, the patch is still a bit of a hack.. I'm just trying to gage interest. If there is any than I'll spend some more effort to clean it up.
:)
- k