Skip to contentSkip to conversation

Fix 64bit Mapple Host Bridge Address and Size Nodes

PATCH In review [email protected] 2 participants 4 messages Apr 3, 2009 – Apr 14, 2009 PowerPC

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines · Benjamin Herrenschmidt
Quoted 2 lines

Thanks.

Firstly sorry for the delay response.

Quoted 4 lines
Quoted 4 lines

Now, is there any reason you can't fold the fix inside the existing fixup_device_tree_maple() fixup ? IE. Does it apply to any Maple board or only this ATCA6101 ?

I really don't validate this on every Maple board since it's impossible to access them for me. I'm glad to improve everything if someone can hold my hand.

Quoted 5 lines
Quoted 5 lines

If not (if it does only apply to this specific board), then give the function a better name, such as fixup_device_tree_atca6101() and make it check for the /model property of the device-tree to make sure you only hit that board and nothing else.

So I have to do the later as you said and please check my v1 patch.

Michael,

Fortunately this patch could be fix something as you expect when you comments one patch about CPC925 on atca6101. Hope helpful!

Best Regards
Tiejun

Quoted 188 lines
Quoted 188 lines

Cheers,
Ben.

Quoted 170 lines · Tiejun Chen
Quoted 170 lines

2009/2/27 Benjamin Herrenschmidt <[email protected]>
On Thu, 2009-02-26 at 18:08 +0800, Tiejun Chen wrote:
> In the DTB tree created by firmware on Maple 64bit target, host bridge
> parent
> node has specified both of these two properties to be 2. However, the
> actual
> "cell" value for host bridge node is 1. we have to provide one fixup
> function.

Hi !

Thanks for the patch. A couple of things tho: Can you make it a bit
more robust by properly checking the board type first ?

That is ATCA 6101 and the following is from the MOTLoad firmware.
------
Copyright Motorola Inc. 1999-2006, All Rights Reserved MOTLoad RTOS Version 2.0, PAL Version 1.1 RM01
Built on Tue Jun 13 10:31:56 EDT 2006 by q3316c
bbs 2.0 build 38

Part Number =01-W3930F04A
Serial Number =0000001

MPU-Type             =PPC970FX DD3.1
MPU-Int Clock Speed  =1800MHz
Memory Speed         =333MHz
PCI bus instance 1   =64 bit, 100 MHz, PCI-X
PCI bus instance 2   =64 bit, 100 MHz, PCI-X
PCI bus instance 3   =64 bit, 100 MHz, PCI-X
PCI bus instance 4   =64 bit, 100 MHz, PCI-X
PCI bus instance 5   =32 bit, 33 MHz, PCI
HT Link instance 1   =16 bit, 400 MHz
HT Link instance 2   = 8 bit, 600 MHz
HT Link instance 3   = 8 bit, 200 MHz

MOTLoad FLASH Image =FLASH Bank A

Local Memory Found =080000000 (&2147483648)
User Download Buffer =0611A5000:0613A4FFF
------

Here is some board information I can know:
------
Board revision: 01
Boot loader version: 2.0
Silicon revision: 3.1 (pvr 003c 0301)
------

Also, what is this "hostbridge" node ? ie, what does it represent ?

That means IBM CPC925 system controller resided on the ATCA 6101.

Can you send me a full dump of /proc/device-tree from the machine ?
(ie tar it up)

See the attachment.

Finally, it looks like your patch was whitespace damaged by your mailer.

After you confirm others is ok I will send v2 improved patch.

Thanks & Best Regards
Tiejun

        Cheers,
        Ben.
        
        
        
        > Signed-off-by: Tiejun Chen <[email protected]>
        > ---
        >  arch/powerpc/kernel/prom_init.c |   42
        > +++++++++++++++++++++++++++++++++++++++
        >  1 files changed, 42 insertions(+), 0 deletions(-)
        >
        > diff --git a/arch/powerpc/kernel/prom_init.c
        > b/arch/powerpc/kernel/prom_init.c
        > index 2445945..9cd23b6 100644
        > --- a/arch/powerpc/kernel/prom_init.c
        > +++ b/arch/powerpc/kernel/prom_init.c
        > @@ -1948,8 +1948,49 @@ static void __init
        > fixup_device_tree_maple(void)
        >        prom_setprop(isa, name, "ranges",
        >                        isa_ranges, sizeof(isa_ranges));
        >  }
        > +
        > +/* On Maple 64bit target host bridge parent node has
        specified
        > address and
        > + * size properties to be 2. But the actual "cell" value for
        host
        > bridge node
        > + * is 1 since early MOTLoad internal bug. */
        > +static void __init fixup_device_tree_maple_hb(void)
        > +{
        > +       phandle hb;
        > +       u32 hb_ranges[4];
        > +       u32 size_cell, addr_cell;
        > +       struct prom_t *_prom = &RELOC(prom);
        > +       char *name;
        > +
        > +       name = "/hostbridge@f8000000";
        > +       hb = call_prom("finddevice", 1, 1, ADDR(name));
        > +       if (!PHANDLE_VALID(hb))
        > +               return;
        > +
        > +       if (prom_getproplen(hb, "reg") != 8)
        > +               return;
        > +
        > +       if (prom_getprop(hb, "reg", hb_ranges,
        (sizeof(hb_ranges))/2)
        > +               == PROM_ERROR)
        > +               return;
        > +
        > +       prom_getprop(_prom->root, "#address-cells",
        &addr_cell,
        > sizeof(addr_cell));
        > +       prom_getprop(_prom->root, "#size-cells", &size_cell,
        > sizeof(size_cell));
        > +
        > +       if ((addr_cell != 2) || (size_cell != 2) ||
        > +               (hb_ranges[0] != 0xf8000000))
        > +               return;
        > +
        > +       prom_printf("Fixing up bogus HOSTBRIDGE reg on
        > Maple/Apache...\n");
        > +
        > +       hb_ranges[3] = hb_ranges[1];
        > +       hb_ranges[1] = hb_ranges[0];
        > +       hb_ranges[0] = hb_ranges[2] = 0;
        > +       prom_setprop(hb, name, "reg",
        > +               hb_ranges, sizeof(hb_ranges));
        > +}
        > +
        >  #else
        >  #define fixup_device_tree_maple()
        > +#define fixup_device_tree_maple_hb()
        >  #endif
        >
        >  #ifdef CONFIG_PPC_CHRP
        > @@ -2190,6 +2231,7 @@ static void __init
        fixup_device_tree_efika(void)
        >  static void __init fixup_device_tree(void)
        >  {
        >        fixup_device_tree_maple();
        > +       fixup_device_tree_maple_hb();
        >        fixup_device_tree_chrp();
        >        fixup_device_tree_pmac();
        >        fixup_device_tree_efika();
Quoted 8 lines
Quoted 8 lines
        > --
        > 1.5.6
        >
        >
        >

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

#1 lore raw

PATCH 1/1 Fix 64bit Maple Host Bridge Address and Size Nodes

In the DTB tree created by firmware on some Maple 64bit targets, such as ATCA6101, these two properties, address&size, should be 2. But the actual corresponding values of host bridge node are set 1 incorrectly by the firmware, we have to provide one fixup function to fix that.

---
 arch/powerpc/kernel/prom_init.c |   51 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 50 insertions(+), 1 deletions(-)
arch/powerpc/kernel/prom_init.c +50 -1
index 2445945..7848b45 100644
@@ -1907,14 +1907,63 @@ static void __init flatten_device_tree(void)
 }
 
 #ifdef CONFIG_PPC_MAPLE
+/* On ATCA6101 64bit target host bridge parent node has specified address and
+ * size properties to be 2. But the actual "cell" value for host bridge node 
+ * is 1 since early MOTLoad internal bug. */
+static void __init fixup_device_tree_atca6101(void)
+{
+	phandle hb;
+	u32 hb_ranges[4];
+	u32 size_cell, addr_cell;
+	struct prom_t *_prom = &RELOC(prom);
+	char *name;
+
+	name = "/hostbridge@f8000000";
+	hb = call_prom("finddevice", 1, 1, ADDR(name));
+	if (!PHANDLE_VALID(hb))
+		return;
+
+	if (prom_getproplen(hb, "reg") != 8)
+		return;
+
+	if (prom_getprop(hb, "reg", hb_ranges, (sizeof(hb_ranges))/2) 
+		== PROM_ERROR)
+		return;
+
+	prom_getprop(_prom->root, "#address-cells", &addr_cell, sizeof(addr_cell));
+	prom_getprop(_prom->root, "#size-cells", &size_cell, sizeof(size_cell));
+	
+	if ((addr_cell != 2) || (size_cell != 2) || 
+		(hb_ranges[0] != 0xf8000000))
+		return;
+
+	prom_printf("Fixing up bogus HOSTBRIDGE reg on ATCA6101...\n");
+
+	hb_ranges[3] = hb_ranges[1];
+	hb_ranges[1] = hb_ranges[0];
+	hb_ranges[0] = hb_ranges[2] = 0;
+	prom_setprop(hb, name, "reg",
+	hb_ranges, sizeof(hb_ranges));
+}
 /* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
- * The values are bad, and it doesn't even have the right number of cells. */
+ * The values are bad, and it doesn't even have the right number of cells. 
+ * Additionally, the early MOTLoad generate incorrect address&size cells on 
+ * some Maple platform such as ATCA6101. */ 
 static void __init fixup_device_tree_maple(void)
 {
 	phandle isa;
 	u32 rloc = 0x01002000; /* IO space; PCI device = 4 */
 	u32 isa_ranges[6];
 	char *name;
+	u32 node;
+	char prop[64];
+	int model;
+	
+	/*  FIXME: This may be used for more Maple targets not only ATCA6101. */
+	node = call_prom("finddevice", 1, 1, ADDR("/"));
+	model = prom_getprop(node, "model", prop, sizeof(prop));
+	if (model != PROM_ERROR && (strcmp(prop, "Motorola,ATCA-6101") == 0))
+                fixup_device_tree_atca6101();
 
 	name = "/ht@0/isa@4";
 	isa = call_prom("finddevice", 1, 1, ADDR(name));
Signature · 1 line
1.5.6
Reviewed-by on v1 1/1
#2 lore raw

Re: [v1 PATCH 1/1] Fix 64bit Maple Host Bridge Address and Size Nodes

Quoted 2 lines

In the DTB tree created by firmware on some Maple 64bit targets, such as ATCA6101, these two properties, address&size, should be 2.

And they are.

Quoted 3 lines

But the actual corresponding values
of host bridge node are set 1 incorrectly by the firmware, we have to provide one fixup function to fix that.

It is the "reg" property that is incorrectly encoded as-if #address-cells and #size-cells were 1.

Please fix the commit message (and subject line).

arch/powerpc/kernel/prom_init.c static void __init flatten_device_tree(void) · line 1922

Quoted 2 lines
arch/powerpc/kernel/prom_init.c +2 -0
+	name = "/hostbridge@f8000000";
+	hb = call_prom("finddevice", 1, 1, ADDR(name));

It's interesting that the firmware can find your node this way, it won't match the "reg"! Looks like there is more than one bug in there.

Code looks good,

Segher

#3 lore raw

Re: [v1 PATCH 1/1] Fix 64bit Maple Host Bridge Address and Size Nodes

Segher,

Thank you very much for your review.

I already re-send this patch as you expect and please check this:
[v2 PATCH 1/1] Fix 64bit Maple Host Bridge 'reg' property

Best Regards
Tiejun

2009/4/14 Segher Boessenkool <[email protected]>

Quoted 34 lines

In the DTB tree created by firmware on some Maple 64bit targets, such as

Quoted 3 lines

ATCA6101,
these two properties, address&size, should be 2.

And they are.

But the actual corresponding values

Quoted 4 lines

of host bridge node are set 1 incorrectly by the firmware, we have to provide one
fixup function to fix that.

It is the "reg" property that is incorrectly encoded as-if #address-cells and #size-cells were 1.

Please fix the commit message (and subject line).

+ name = "/hostbridge@f8000000";

Quoted 2 lines

+ hb = call_prom("finddevice", 1, 1, ADDR(name));

It's interesting that the firmware can find your node this way, it won't match the "reg"! Looks like there is more than one bug in there.

Code looks good,

Segher