Skip to contentSkip to conversation

Support for MB86R01 cpu

U-Boot Thirumalai 3 participants 6 messages May 18, 2010 – May 21, 2010

lore
Share & tools
lore

Thirumalai

author
#0 lore raw

Hi Matthias,
We are using MB86R01 processor in our design. We just want to know
what emulator/debugger can be used for initial board bring-up activity and also whether the latest u-boot(2010.03) is supporting this processor ?

-Thirumalai

#1 lore raw

Hello Thirumalai

Am 18.05.2010 07:37, schrieb Thirumalai:

Quoted 4 lines

Hi Matthias,
We are using MB86R01 processor in our design. We just want to know
what emulator/debugger can be used for initial board bring-up activity and also whether the latest u-boot(2010.03) is supporting this processor ?

I recently posted a patch series adding support for MB86R01 to u-boot. I did not receive any comments on V2 so I thinks its more or less fine and I hope it will be merged within the upcoming merge window.

See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the initial mail of the patch series.

I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html)
for initial flash programming. A Segger JLink
(http://www.segger.com/cms/jlink.html) works also.

Hope this helped.

Matthias

author
#2 lore raw

Hi Matthias,
I am going to use u-boot alone for my development. Which debugger is
suitable for debugging u-boot and initial board bringup activity? My choice is BDI2000. Is it ok.
Also tell me what toolchains need to be used. Is ELDK supports? Whether the video driver is available on u-boot ?
-Thirumalai

----- Original Message -----
From: "Matthias Wei?er" <[email protected]>
To: "Thirumalai" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, May 18, 2010 11:18 AM
Subject: Re: [U-Boot] Support for MB86R01 cpu

Quoted 24 lines

Hello Thirumalai

Am 18.05.2010 07:37, schrieb Thirumalai:

Quoted 6 lines

Hi Matthias,
We are using MB86R01 processor in our design. We just want to
know
what emulator/debugger can be used for initial board bring-up activity and
also whether the latest u-boot(2010.03) is supporting this processor ?

I recently posted a patch series adding support for MB86R01 to u-boot. I did not receive any comments on V2 so I thinks its more or less fine and I hope it will be merged within the upcoming merge window.

See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the initial mail of the patch series.

I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html) for initial flash programming. A Segger JLink
(http://www.segger.com/cms/jlink.html) works also.

Hope this helped.

Matthias

#3 lore raw

Hi Thirumalai

Am 18.05.2010 08:29, schrieb Thirumalai:

Quoted 4 lines

Hi Matthias,
I am going to use u-boot alone for my development. Which debugger is
suitable for debugging u-boot and initial board bringup activity? My choice is BDI2000. Is it ok.

Yes. As I said. But I never used it to debug u-boot together together with GDB. After the serial console was up I used printf-like debugging. And before that point I could live quite good with simple BDI commands.

Quoted 1 line

Also tell me what toolchains need to be used. Is ELDK supports?

I don't know. I used a toolchain which I build myself using crosstools-ng (see http://freshmeat.net/projects/crosstool-ng/)

Quoted 1 line

Whether the video driver is available on u-boot ?

Check my patch series and you will see ;-)

Matthias

Quoted 35 lines

-Thirumalai

----- Original Message -----
From: "Matthias Wei?er" <[email protected]>
To: "Thirumalai" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, May 18, 2010 11:18 AM
Subject: Re: [U-Boot] Support for MB86R01 cpu

Quoted 24 lines

Hello Thirumalai

Am 18.05.2010 07:37, schrieb Thirumalai:

Quoted 6 lines

Hi Matthias,
We are using MB86R01 processor in our design. We just want to
know
what emulator/debugger can be used for initial board bring-up activity and
also whether the latest u-boot(2010.03) is supporting this processor ?

I recently posted a patch series adding support for MB86R01 to u-boot. I did not receive any comments on V2 so I thinks its more or less fine and I hope it will be merged within the upcoming merge window.

See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the initial mail of the patch series.

I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html) for initial flash programming. A Segger JLink
(http://www.segger.com/cms/jlink.html) works also.

Hope this helped.

Matthias

author
#4 lore raw

Hi Matthias,

Quoted 9 lines

Hi Thirumalai

Am 18.05.2010 08:29, schrieb Thirumalai:

Quoted 5 lines

Hi Matthias,
I am going to use u-boot alone for my development. Which debugger
is
suitable for debugging u-boot and initial board bringup activity? My choice is BDI2000. Is it ok.

Quoted 4 lines

Yes. As I said. But I never used it to debug u-boot together together with GDB. After the serial console was up I used printf-like debugging. And before that point I could live quite good with simple BDI commands.

Whether source level debugging is possible with BDI2000?

Quoted 8 lines
Quoted 1 line

Also tell me what toolchains need to be used. Is ELDK supports?

I don't know. I used a toolchain which I build myself using crosstools-ng (see http://freshmeat.net/projects/crosstool-ng/)

Quoted 1 line

Whether the video driver is available on u-boot ?

Check my patch series and you will see ;-)

I will check and tell this.

Quoted 41 lines

Matthias

Quoted 37 lines

-Thirumalai

----- Original Message -----
From: "Matthias Wei?er" <[email protected]>
To: "Thirumalai" <[email protected]>
Cc: <[email protected]>
Sent: Tuesday, May 18, 2010 11:18 AM
Subject: Re: [U-Boot] Support for MB86R01 cpu

Quoted 26 lines

Hello Thirumalai

Am 18.05.2010 07:37, schrieb Thirumalai:

Quoted 6 lines

Hi Matthias,
We are using MB86R01 processor in our design. We just want to
know
what emulator/debugger can be used for initial board bring-up activity and
also whether the latest u-boot(2010.03) is supporting this processor ?

I recently posted a patch series adding support for MB86R01 to u-boot. I did not receive any comments on V2 so I thinks its more or less fine and I
hope it will be merged within the upcoming merge window.

See http://lists.denx.de/pipermail/u-boot/2010-May/071097.html for the initial mail of the patch series.

I am using a BDI2000 (http://www.abatron.ch/products/bdi-family.html)
for
initial flash programming. A Segger JLink
(http://www.segger.com/cms/jlink.html) works also.

Hope this helped.

Matthias

#5 lore raw

Hi Thirumalai,

Quoted 11 lines

Hi Matthias,

Quoted 9 lines

Hi Thirumalai

Am 18.05.2010 08:29, schrieb Thirumalai:

Quoted 5 lines

Hi Matthias,
I am going to use u-boot alone for my development. Which debugger
is
suitable for debugging u-boot and initial board bringup activity? My choice is BDI2000. Is it ok.

Quoted 6 lines
Quoted 4 lines

Yes. As I said. But I never used it to debug u-boot together together with GDB. After the serial console was up I used printf-like debugging. And before that point I could live quite good with simple BDI commands.

Whether source level debugging is possible with BDI2000?

Yes of course this is possible. It's even in the documentation:

http://www.denx.de/wiki/view/DULG/DebuggingUBoot

Cheers
Detlev

Signature · 7 lines
Wenn ein Kopf und ein Buch zusammenstossen und es klingt hohl; ist
denn das allemal im Buche?
                               - Lichtenberg
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de