Skip to contentSkip to conversation

ide-cd: cdrom_decode_status: use return codes instead of naked numbers

PATCH Applied Borislav Petkov 2 participants 3 messages Apr 5, 2009 – Apr 7, 2009 libata

lore
Share & tools
lore
#0 lore raw

PATCH 2/2 ide-cd: cdrom_decode_status: use return codes instead of naked numbers

Remove unused SECTOR_SIZE while at it.

There should be no functional change resulting from this patch.

---
 drivers/ide/ide-cd.c |   22 ++++++++--------------
 drivers/ide/ide-cd.h |   12 ++++++------
 2 files changed, 14 insertions(+), 20 deletions(-)
drivers/ide/ide-cd.c +8 -14
index 2aa13d8..1dc61fc 100644
@@ -301,12 +301,6 @@ static int ide_cd_breathe(ide_drive_t *drive, struct request *rq)
 	}
 }
 
-/**
- * Returns:
- * 0: if the request should be continued.
- * 1: if the request will be going through error recovery.
- * 2: if the request should be ended.
- */
 static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -329,7 +323,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 		 * Just give up.
 		 */
 		rq->cmd_flags |= REQ_FAILED;
-		return 2;
+		return REQ_FAIL;
 	}
 
 	/* if we have an error, pass CHECK_CONDITION as the SCSI status byte */
@@ -343,7 +337,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 	case NOT_READY:
 		if (blk_fs_request(rq) && rq_data_dir(rq) == WRITE) {
 			if (ide_cd_breathe(drive, rq))
-				return 1;
+				return REQ_RECOVER;
 		} else {
 			cdrom_saw_media_change(drive);
 
@@ -357,7 +351,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 		cdrom_saw_media_change(drive);
 
 		if (blk_fs_request(rq) == 0)
-			return 0;
+			return REQ_CONT;
 
 		/*
 		 * Arrange to retry the request but be sure to give up if we've
@@ -409,7 +403,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 		if (err & ~ATA_ABORTED) {
 			/* go to the default handler for other errors */
 			ide_error(drive, "cdrom_decode_status", stat);
-			return 1;
+			return REQ_RECOVER;
 		} else if (++rq->errors > ERROR_MAX)
 			/* we've racked up too many retries, abort */
 			do_end_request = 1;
@@ -431,7 +425,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 	/* if we got a CHECK_CONDITION status, queue a request sense command */
 	if (stat & ATA_ERR)
 		cdrom_queue_request_sense(drive, NULL, NULL);
-	return 1;
+	return REQ_RECOVER;
 
 end_request:
 	if (stat & ATA_ERR) {
@@ -445,9 +439,9 @@ end_request:
 		hwif->rq = NULL;
 
 		cdrom_queue_request_sense(drive, rq->sense, rq);
-		return 1;
-	} else
-		return 2;
+		return REQ_RECOVER;
+	}
+	return REQ_FAIL;
 }
 
 /*
drivers/ide/ide-cd.h +6 -6
index 1d97101..7e17e70 100644
@@ -18,15 +18,15 @@
 
 #define ATAPI_WAIT_WRITE_BUSY	(10 * HZ)
 
-/************************************************************************/
-
-#define SECTOR_BITS 		9
-#ifndef SECTOR_SIZE
-#define SECTOR_SIZE		(1 << SECTOR_BITS)
-#endif
+#define SECTOR_BITS		9
 #define SECTORS_PER_FRAME	(CD_FRAMESIZE >> SECTOR_BITS)
 #define SECTOR_BUFFER_SIZE	(CD_FRAMESIZE * 32)
 
+/* internal decode_status codes */
+#define REQ_CONT               0
+#define REQ_RECOVER            1
+#define REQ_FAIL               2
+
 /* Capabilities Page size including 8 bytes of Mode Page Header */
 #define ATAPI_CAPABILITIES_PAGE_SIZE		(8 + 20)
 #define ATAPI_CAPABILITIES_PAGE_PAD_SIZE	4
Signature · 1 line
1.6.2.1
#1 lore raw
Quoted 5 lines · Borislav Petkov

Remove unused SECTOR_SIZE while at it.

There should be no functional change resulting from this patch.

[...]

Quoted 10 lines
drivers/ide/ide-cd.c +1 -1
@@ -431,7 +425,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 	/* if we got a CHECK_CONDITION status, queue a request sense command */
 	if (stat & ATA_ERR)
 		cdrom_queue_request_sense(drive, NULL, NULL);
-	return 1;
+	return REQ_RECOVER;
 
 end_request:
 	if (stat & ATA_ERR) {

drivers/ide/ide-cd.c end_request: · line 445

Quoted 10 lines
drivers/ide/ide-cd.c +3 -3
@@ -445,9 +439,9 @@ end_request:
 		hwif->rq = NULL;
 
 		cdrom_queue_request_sense(drive, rq->sense, rq);
-		return 1;
-	} else
-		return 2;
+		return REQ_RECOVER;
+	}
+	return REQ_FAIL;
 }

Could it be that cdrom_newpc_intr() chunk got lost somewhere along the way, IIRC it was there?

[...]

drivers/ide/ide-cd.h line 28

Quoted 4 lines
drivers/ide/ide-cd.h +4 -0
+/* internal decode_status codes */
+#define REQ_CONT               0
+#define REQ_RECOVER            1
+#define REQ_FAIL               2

Did you notice my comments about REQ_* in previous mail?

#2 lore raw

Hi,

Quoted 21 lines · Bartlomiej Zolnierkiewicz
Quoted 5 lines · Borislav Petkov

Remove unused SECTOR_SIZE while at it.

There should be no functional change resulting from this patch.

[...]

Quoted 12 lines
drivers/ide/ide-cd.c +1 -1
@@ -431,7 +425,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
 	/* if we got a CHECK_CONDITION status, queue a request sense command */
 	if (stat & ATA_ERR)
 		cdrom_queue_request_sense(drive, NULL, NULL);
-	return 1;
+	return REQ_RECOVER;
 
 end_request:
 	if (stat & ATA_ERR) {
@@ -445,9 +439,9 @@ end_request:
 		hwif->rq = NULL;
 
Quoted 11 lines

drivers/ide/ide-cd.c end_request: · line 445

Quoted 8 lines
drivers/ide/ide-cd.c +3 -3
 		cdrom_queue_request_sense(drive, rq->sense, rq);
-		return 1;
-	} else
-		return 2;
+		return REQ_RECOVER;
+	}
+	return REQ_FAIL;
 }

Could it be that cdrom_newpc_intr() chunk got lost somewhere along the way, IIRC it was there?

That I dropped :), my bad.

Quoted 6 lines

drivers/ide/ide-cd.h line 28

Quoted 4 lines
drivers/ide/ide-cd.h +4 -0
+/* internal decode_status codes */
+#define REQ_CONT               0
+#define REQ_RECOVER            1
+#define REQ_FAIL               2

Did you notice my comments about REQ_* in previous mail?

Yep, about those - is there a valid reason for calling them IDE_RQ_*? I know REQ_* is too generic but since they're private to the driver it really is the only proper naming you _can_ have without adding too much information to the name. FWIW, SCSI has even more generic names for them
- SUCCESS, FAILED, etc. And the IDE_* prefix is only then called for when they're going to be visible/used by some other IDE parts. So IMHO REQ_* or RQ_* is actually better in this case.

Signature · 2 lines
Regards/Gruss,
    Boris.