Skip to contentSkip to conversation

btrfs vs ext4 benchmark

DISCUSSION Morten P.D. Stevens 2 participants 3 messages Apr 4, 2009 – Apr 7, 2009 Btrfs file system

lore
Share & tools
lore
#0 lore raw

Hi,

here are some tests on an IBM server with btrfs vs. ext4.

Kernel: 2.6.29.1
Benchmark software: compilerbench with options -i 10 -r 30
CPU: Intel Xeon Quadcore E5310
Chipset: Intel 5000
Memory: 4 GB FB-DIMM DDR2-667
HDDs: 2x WD6400AAKS @ Raid0
Storage Controller: IBM Serveraid 8k

btrfs Result:

intial create total runs 10 avg 50.89 MB/s (user 0.85s sys 2.59s) create total runs 5 avg 23.62 MB/s (user 0.82s sys 2.55s) patch total runs 4 avg 11.35 MB/s (user 0.38s sys 2.22s) compile total runs 7 avg 66.33 MB/s (user 0.19s sys 1.32s) clean total runs 4 avg 195.76 MB/s (user 0.03s sys 0.50s) read tree total runs 2 avg 11.99 MB/s (user 0.66s sys 2.59s) read compiled tree total runs 1 avg 30.14 MB/s (user 0.88s sys 3.64s) delete tree total runs 2 avg 10.79 seconds (user 0.43s sys 3.39s) no runs for delete compiled tree
stat tree total runs 4 avg 9.62 seconds (user 0.41s sys 1.03s) stat compiled tree total runs 1 avg 10.51 seconds (user 0.49s sys 1.19s)

ext4 Result:

intial create total runs 10 avg 96.09 MB/s (user 0.77s sys 1.34s) create total runs 5 avg 50.84 MB/s (user 0.82s sys 1.20s) patch total runs 4 avg 20.17 MB/s (user 0.28s sys 1.04s) compile total runs 7 avg 94.39 MB/s (user 0.17s sys 1.07s) clean total runs 4 avg 959.66 MB/s (user 0.03s sys 0.11s) read tree total runs 2 avg 14.67 MB/s (user 0.78s sys 1.26s) read compiled tree total runs 1 avg 31.96 MB/s (user 0.87s sys 2.31s) delete tree total runs 2 avg 2.14 seconds (user 0.34s sys 0.81s) no runs for delete compiled tree
stat tree total runs 4 avg 1.82 seconds (user 0.40s sys 0.35s) stat compiled tree total runs 1 avg 1.83 seconds (user 0.35s sys 0.33s)

Best regards,

Morten

#1 lore raw

Update:

And here the compilebench with options -i 90 and -r 150 (the same as or= acle)

btrfs:

=2E/compilebench -D /btrfs/work2 -i 90 -r 150

run complete:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D
intial create total runs 90 avg 45.18 MB/s (user 0.84s sys 2.89s) create total runs 20 avg 13.30 MB/s (user 0.88s sys 2.93s) patch total runs 24 avg 5.94 MB/s (user 0.34s sys 2.56s) compile total runs 23 avg 37.04 MB/s (user 0.19s sys 1.60s) clean total runs 14 avg 71.36 MB/s (user 0.03s sys 0.83s) read tree total runs 17 avg 7.02 MB/s (user 0.75s sys 3.26s) read compiled tree total runs 8 avg 16.27 MB/s (user 0.86s sys 4.83s) delete tree total runs 14 avg 21.51 seconds (user 0.45s sys 4.07s) delete compiled tree total runs 6 avg 29.23 seconds (user 0.57s sys 4.6= 6s)
stat tree total runs 14 avg 15.99 seconds (user 0.41s sys 1.31s) stat compiled tree total runs 10 avg 19.68 seconds (user 0.41s sys 1.51=
s)

ext4:

=2E/compilebench -D /mnt/work2 -i 90 -r 150

run complete:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D
intial create total runs 90 avg 92.42 MB/s (user 0.76s sys 1.38s) create total runs 20 avg 52.06 MB/s (user 0.73s sys 1.26s) patch total runs 24 avg 17.28 MB/s (user 0.37s sys 0.96s) compile total runs 23 avg 85.64 MB/s (user 0.17s sys 1.05s) clean total runs 14 avg 887.53 MB/s (user 0.02s sys 0.11s) read tree total runs 17 avg 13.60 MB/s (user 0.79s sys 1.34s) read compiled tree total runs 8 avg 24.65 MB/s (user 0.95s sys 2.07s) delete tree total runs 14 avg 2.26 seconds (user 0.39s sys 0.78s) delete compiled tree total runs 6 avg 2.82 seconds (user 0.43s sys 0.91=
s)
stat tree total runs 14 avg 1.71 seconds (user 0.38s sys 0.33s) stat compiled tree total runs 10 avg 1.99 seconds (user 0.42s sys 0.33s= )

I=B4m a little disappointed about the btrfs results. I was hopefully that btrfs is faster than ext4....

-

Morten

2009/4/4 Morten P.D. Stevens <[email protected]>:

Quoted 14 lines

Hi,

here are some tests on an IBM server with btrfs vs. ext4.

Kernel: 2.6.29.1
Benchmark software: compilerbench with options -i 10 -r 30
CPU: Intel Xeon Quadcore E5310
Chipset: Intel 5000
Memory: 4 GB FB-DIMM DDR2-667
HDDs: 2x WD6400AAKS @ Raid0
Storage Controller: IBM Serveraid 8k

btrfs Result:

Quoted 11 lines

intial create total runs 10 avg 50.89 MB/s (user 0.85s sys 2.59s) create total runs 5 avg 23.62 MB/s (user 0.82s sys 2.55s) patch total runs 4 avg 11.35 MB/s (user 0.38s sys 2.22s) compile total runs 7 avg 66.33 MB/s (user 0.19s sys 1.32s) clean total runs 4 avg 195.76 MB/s (user 0.03s sys 0.50s) read tree total runs 2 avg 11.99 MB/s (user 0.66s sys 2.59s) read compiled tree total runs 1 avg 30.14 MB/s (user 0.88s sys 3.64s) delete tree total runs 2 avg 10.79 seconds (user 0.43s sys 3.39s) no runs for delete compiled tree
stat tree total runs 4 avg 9.62 seconds (user 0.41s sys 1.03s) stat compiled tree total runs 1 avg 10.51 seconds (user 0.49s sys 1.1=

9s)

Quoted 14 lines

ext4 Result:

intial create total runs 10 avg 96.09 MB/s (user 0.77s sys 1.34s) create total runs 5 avg 50.84 MB/s (user 0.82s sys 1.20s) patch total runs 4 avg 20.17 MB/s (user 0.28s sys 1.04s) compile total runs 7 avg 94.39 MB/s (user 0.17s sys 1.07s) clean total runs 4 avg 959.66 MB/s (user 0.03s sys 0.11s) read tree total runs 2 avg 14.67 MB/s (user 0.78s sys 1.26s) read compiled tree total runs 1 avg 31.96 MB/s (user 0.87s sys 2.31s) delete tree total runs 2 avg 2.14 seconds (user 0.34s sys 0.81s) no runs for delete compiled tree
stat tree total runs 4 avg 1.82 seconds (user 0.40s sys 0.35s) stat compiled tree total runs 1 avg 1.83 seconds (user 0.35s sys 0.33=

s)

Quoted 6 lines

Best regards,

Morten

--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" = in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
Quoted 3 lines · Morten P.D. Stevens

Update:
=20
And here the compilebench with options -i 90 and -r 150 (the same as =

oracle)

Quoted 1 line

=20

The difference in initial create times is pretty surprising. My guess is that single spindle duplication of metadata hurts more on this raid array.

=46or the other times compilebench was actually written to make btrfs l= ook
bad. The main goal was to age and fragment the metadata, while constantly clearing out the caches used to make things fast.

IOW, it was meant to be a worst case ;) Some of these numbers look lik= e
the cache clearing wasn't hitting ext4. I'll rerun the test against ext4 next week.

-chris

Quoted 6 lines

btrfs:
=20
./compilebench -D /btrfs/work2 -i 90 -r 150
=20
run complete:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D

Quoted 9 lines

intial create total runs 90 avg 45.18 MB/s (user 0.84s sys 2.89s) create total runs 20 avg 13.30 MB/s (user 0.88s sys 2.93s) patch total runs 24 avg 5.94 MB/s (user 0.34s sys 2.56s) compile total runs 23 avg 37.04 MB/s (user 0.19s sys 1.60s) clean total runs 14 avg 71.36 MB/s (user 0.03s sys 0.83s) read tree total runs 17 avg 7.02 MB/s (user 0.75s sys 3.26s) read compiled tree total runs 8 avg 16.27 MB/s (user 0.86s sys 4.83s) delete tree total runs 14 avg 21.51 seconds (user 0.45s sys 4.07s) delete compiled tree total runs 6 avg 29.23 seconds (user 0.57s sys 4=

=2E66s)

Quoted 2 lines

stat tree total runs 14 avg 15.99 seconds (user 0.41s sys 1.31s) stat compiled tree total runs 10 avg 19.68 seconds (user 0.41s sys 1.=

51s)

Quoted 9 lines

=20
=20
ext4:
=20
./compilebench -D /mnt/work2 -i 90 -r 150
=20
=20
run complete:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D

Quoted 9 lines

intial create total runs 90 avg 92.42 MB/s (user 0.76s sys 1.38s) create total runs 20 avg 52.06 MB/s (user 0.73s sys 1.26s) patch total runs 24 avg 17.28 MB/s (user 0.37s sys 0.96s) compile total runs 23 avg 85.64 MB/s (user 0.17s sys 1.05s) clean total runs 14 avg 887.53 MB/s (user 0.02s sys 0.11s) read tree total runs 17 avg 13.60 MB/s (user 0.79s sys 1.34s) read compiled tree total runs 8 avg 24.65 MB/s (user 0.95s sys 2.07s) delete tree total runs 14 avg 2.26 seconds (user 0.39s sys 0.78s) delete compiled tree total runs 6 avg 2.82 seconds (user 0.43s sys 0.=

91s)

Quoted 2 lines

stat tree total runs 14 avg 1.71 seconds (user 0.38s sys 0.33s) stat compiled tree total runs 10 avg 1.99 seconds (user 0.42s sys 0.3=

3s)

Quoted 32 lines

=20
=20
I=C2=B4m a little disappointed about the btrfs results. I was hopefully that btrfs is faster than ext4.... =20
-
=20
Morten
=20
=20
2009/4/4 Morten P.D. Stevens <[email protected]>:

Quoted 21 lines

Hi,

here are some tests on an IBM server with btrfs vs. ext4.

Kernel: 2.6.29.1
Benchmark software: compilerbench with options -i 10 -r 30
CPU: Intel Xeon Quadcore E5310
Chipset: Intel 5000
Memory: 4 GB FB-DIMM DDR2-667
HDDs: 2x WD6400AAKS @ Raid0
Storage Controller: IBM Serveraid 8k

btrfs Result:

intial create total runs 10 avg 50.89 MB/s (user 0.85s sys 2.59s) create total runs 5 avg 23.62 MB/s (user 0.82s sys 2.55s) patch total runs 4 avg 11.35 MB/s (user 0.38s sys 2.22s) compile total runs 7 avg 66.33 MB/s (user 0.19s sys 1.32s) clean total runs 4 avg 195.76 MB/s (user 0.03s sys 0.50s) read tree total runs 2 avg 11.99 MB/s (user 0.66s sys 2.59s) read compiled tree total runs 1 avg 30.14 MB/s (user 0.88s sys 3.64=

s)

Quoted 4 lines
Quoted 4 lines

delete tree total runs 2 avg 10.79 seconds (user 0.43s sys 3.39s) no runs for delete compiled tree
stat tree total runs 4 avg 9.62 seconds (user 0.41s sys 1.03s) stat compiled tree total runs 1 avg 10.51 seconds (user 0.49s sys 1=

=2E19s)

Quoted 10 lines
Quoted 10 lines

ext4 Result:

intial create total runs 10 avg 96.09 MB/s (user 0.77s sys 1.34s) create total runs 5 avg 50.84 MB/s (user 0.82s sys 1.20s) patch total runs 4 avg 20.17 MB/s (user 0.28s sys 1.04s) compile total runs 7 avg 94.39 MB/s (user 0.17s sys 1.07s) clean total runs 4 avg 959.66 MB/s (user 0.03s sys 0.11s) read tree total runs 2 avg 14.67 MB/s (user 0.78s sys 1.26s) read compiled tree total runs 1 avg 31.96 MB/s (user 0.87s sys 2.31=

s)

Quoted 4 lines
Quoted 4 lines

delete tree total runs 2 avg 2.14 seconds (user 0.34s sys 0.81s) no runs for delete compiled tree
stat tree total runs 4 avg 1.82 seconds (user 0.40s sys 0.35s) stat compiled tree total runs 1 avg 1.83 seconds (user 0.35s sys 0.=

33s)

Quoted 8 lines
Quoted 6 lines

Best regards,

Morten

--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs=

" in

Quoted 2 lines

the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" = in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html