Skip to contentSkip to conversation

Added gsoap version 2.7.13

PATCH In review Dirk 'Virk' Van Haerenborgh 2 participants 4 messages Apr 7, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Added gsoap version 2.7.13

The patch is to make sure the just build binary soapcpp2 is used instead of looking for it in /usr/bin in the staging dir, just the same as v2.7.7 of gsoap.

---
 .../use-just-built-binary-2.7.13.patch             |   12 +++++++
 recipes/gsoap/gsoap-native_2.7.13.bb               |   16 ++++++++++
 recipes/gsoap/gsoap_2.7.13.bb                      |   31 ++++++++++++++++++++
 3 files changed, 59 insertions(+), 0 deletions(-)
 create mode 100644 recipes/gsoap/gsoap-native/use-just-built-binary-2.7.13.patch
 create mode 100644 recipes/gsoap/gsoap-native_2.7.13.bb
 create mode 100644 recipes/gsoap/gsoap_2.7.13.bb
recipes/gsoap/gsoap-native/use-just-built-binary-2.7.13.patch new file +12 -0
new file mode 100644
index 0000000..25a8ef0
@@ -0,0 +1,12 @@
+diff -urN gsoap-2.7.orig/gsoap/wsdl/Makefile.am gsoap-2.7.orig/gsoap/wsdl/Makefile.am
+--- gsoap-2.7.orig/gsoap/wsdl/Makefile.am	2009-03-21 22:24:42.000000000 +0100
++++ gsoap-2.7.orig/gsoap/wsdl/Makefile.am	2009-04-07 11:30:50.000000000 +0200
+@@ -17,7 +17,7 @@ BUILT_SOURCES=$(SOAP_CPP_SRC)
+ # WSDL2H_EXTRA_LIBS=-lssl -lcrypto -lz # defined in configure.in
+ 
+ $(SOAP_CPP_SRC) : $(SOAPHEADER)
+-	$(SOAP) $(SOAP_FLAGS) $(SOAPHEADER)
++	../src/soapcpp2 $(SOAP_FLAGS) $(SOAPHEADER)
+ 
+ #LIBS=
+ 
recipes/gsoap/gsoap-native_2.7.13.bb new file +16 -0
new file mode 100644
index 0000000..e046ff6
@@ -0,0 +1,16 @@
+require gsoap_${PV}.bb
+
+DEPENDS = ""
+PR = "r1"
+
+SRC_URI += "file://use-just-built-binary-2.7.13.patch;patch=1"
+
+inherit native
+
+do_stage() {
+	autotools_stage_all
+}
+
+do_install() {
+	:
+}
recipes/gsoap/gsoap_2.7.13.bb new file +31 -0
new file mode 100644
index 0000000..53d02d2
@@ -0,0 +1,31 @@
+DESCRIPTION = "The gSOAP toolkit provides a unique SOAP-to-C/C++ language binding \
+for the development of SOAP Web Services and clients."
+SECTION = "devel"
+LICENSE = "GPL"
+DEPENDS = "gsoap-native"
+PR = "r1"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/gsoap2/gsoap_${PV}.tar.gz"
+
+S = "${WORKDIR}/gsoap-2.7"
+
+inherit autotools
+
+PARALLEL_MAKE = ""
+
+EXTRA_OEMAKE = "SOAP=${STAGING_BINDIR_NATIVE}/soapcpp2"
+
+do_install_append() {
+	install -d ${D}${libdir}
+	for lib in libgsoapssl libgsoapssl++ libgsoap libgsoapck++ libgsoap++ libgsoapck
+	do
+		oe_libinstall -C gsoap $lib ${D}${libdir}
+	done
+}
+
+do_stage() {
+	autotools_stage_all
+}
+
+PACKAGES = "${PN}-dbg ${PN}-dev ${PN} ${PN}-doc ${PN}-locale"
+FILES_gsoap-dev = "${bindir}/wsdl2h ${bindir}/src ${libdir}"
Signature · 1 line
1.6.0.4
#1 lore raw

Review

Quoted 8 lines · Dirk 'Virk' Van Haerenborgh

The patch is to make sure the just build binary soapcpp2 is used instead of looking for it in /usr/bin in the staging dir, just the same as v2.7.7 of gsoap.

+++ b/recipes/gsoap/gsoap-native_2.7.13.bb

(quoted diff) +1 -0
@@ -0,0 +1,16 @@
 
+PR = "r1"

remove that

recipes/gsoap/gsoap-native_2.7.13.bb line 12

Quoted 3 lines
recipes/gsoap/gsoap-native_2.7.13.bb new file +3 -0
+do_stage() {
+	autotools_stage_all
+}

Remove that (see below)

Quoted 3 lines

+++ b/recipes/gsoap/gsoap_2.7.13.bb

+PR = "r1"

remove that

Quoted 1 line

+inherit autotools

change that to autotools_stage

recipes/gsoap/gsoap-native_2.7.13.bb line 12

Quoted 3 lines
recipes/gsoap/gsoap-native_2.7.13.bb new file +3 -0
+do_stage() {
+	autotools_stage_all
+}

That can be removed if you inherit autotools_stage

Quoted 1 line

+PACKAGES = "${PN}-dbg ${PN}-dev ${PN} ${PN}-doc ${PN}-locale"

That looks wrong, remove that

Quoted 1 line

+FILES_gsoap-dev = "${bindir}/wsdl2h ${bindir}/src ${libdir}"

Change that to something like:

FILES_${PN}-dev += "${bindir}/wsdl2h ${bindir}/src ${libdir}"

And define FILES_${PN} more narrowly.

regards,

Koen

#2 lore raw

Thanks for looking at it.

I've changed everything as advised.

However, I am quite new to both gsoap and OE, hence I do not know how to define FILES_${PN} more narrowly.

this recipe is quite similar to gsoap_2.7.7 (which is in the oe.dev repo atm) in which FILES_${PN} as broad as here.

-Dirk

2009/4/7 Koen Kooi <[email protected]>

Quoted 69 lines · Dirk 'Virk' Van Haerenborgh
Quoted 5 lines

The patch is to make sure the just build binary soapcpp2 is used instead of looking for it in /usr/bin in the staging dir, just the same as v2.7.7 of gsoap.

+++ b/recipes/gsoap/gsoap-native_2.7.13.bb

Review

Quoted 2 lines
(quoted diff) +0 -0
@@ -0,0 +1,16 @@

+PR = "r1"

Quoted 1 line

remove that

+do_stage() {

Review

Quoted 3 lines
(quoted diff) +2 -0
+       autotools_stage_all
+}

Remove that (see below)

+++ b/recipes/gsoap/gsoap_2.7.13.bb

Quoted 1 line

+PR = "r1"

Quoted 1 line

remove that

+inherit autotools

Quoted 1 line

change that to autotools_stage

+do_stage() {

Review

Quoted 3 lines
(quoted diff) +2 -0
+       autotools_stage_all
+}

That can be removed if you inherit autotools_stage

+PACKAGES = "${PN}-dbg ${PN}-dev ${PN} ${PN}-doc ${PN}-locale"

Quoted 1 line

That looks wrong, remove that

+FILES_gsoap-dev = "${bindir}/wsdl2h ${bindir}/src ${libdir}"

Quoted 1 line

Change that to something like:

FILES_${PN}-dev += "${bindir}/wsdl2h ${bindir}/src ${libdir}"

And define FILES_${PN} more narrowly.

regards,

Koen

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

#3 lore raw
Quoted 6 lines · Dirk Van Haerenborgh

Thanks for looking at it.

I've changed everything as advised.

However, I am quite new to both gsoap and OE, hence I do not know how to define FILES_${PN} more narrowly.

Basically:

dpkg-deb -c gsoap-ipk-produced-from-old-recipe.ipk

Look at the output e.g.

/usr/bin/foo
/usr/bin/bar

Based on that do:

FILES_${PN} = "${bindir}/foo \
${bindir}/bar \
"

I suspect the PACKAGES and FILES_gsoap-dev trickery was used to keep some files *out* of ${PN}.

regards,

Koen

Quoted 76 lines

this recipe is quite similar to gsoap_2.7.7 (which is in the oe.dev repo atm) in which FILES_${PN} as broad as here.

-Dirk

2009/4/7 Koen Kooi<[email protected]>

Quoted 69 lines · Dirk 'Virk' Van Haerenborgh
Quoted 5 lines

The patch is to make sure the just build binary soapcpp2 is used instead of looking for it in /usr/bin in the staging dir, just the same as v2.7.7 of gsoap.

+++ b/recipes/gsoap/gsoap-native_2.7.13.bb

Review

Quoted 2 lines
(quoted diff) +0 -0
@@ -0,0 +1,16 @@

+PR = "r1"

Quoted 1 line

remove that

+do_stage() {

Review

Quoted 3 lines
(quoted diff) +2 -0
+       autotools_stage_all
+}

Remove that (see below)

+++ b/recipes/gsoap/gsoap_2.7.13.bb

Quoted 1 line

+PR = "r1"

Quoted 1 line

remove that

+inherit autotools

Quoted 1 line

change that to autotools_stage

+do_stage() {

Review

Quoted 3 lines
(quoted diff) +2 -0
+       autotools_stage_all
+}

That can be removed if you inherit autotools_stage

+PACKAGES = "${PN}-dbg ${PN}-dev ${PN} ${PN}-doc ${PN}-locale"

Quoted 1 line

That looks wrong, remove that

+FILES_gsoap-dev = "${bindir}/wsdl2h ${bindir}/src ${libdir}"

Quoted 1 line

Change that to something like:

FILES_${PN}-dev += "${bindir}/wsdl2h ${bindir}/src ${libdir}"

And define FILES_${PN} more narrowly.

regards,

Koen

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel