ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
PATCH 1/1 ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
Currently the NOR & NAND support in Linux only works for the "standard" Sequoia, the version booting for NOR flash. The NAND-booting version has the chip-selects swapped. Here the chip-select mappings:
"Standard" NOR-booting version:
CS0 NOR
CS3 NAND
NAND-booting version:
CS0 NAND
CS3 NOR
With this path the dtb gets fixed-up, so that the correct chip-select numbers are patched in the dtb enabling correct NOR & NAND support in Linux on the NAND-booting Sequoia version.
Signed-off-by Stefan Roese <[email protected]>
--- board/amcc/sequoia/sequoia.c | 58 ++++++++++++++++++++++++++++++++++++++++- 1 files changed, 56 insertions(+), 2 deletions(-)
board/amcc/sequoia/sequoia.c +56 -2
@@ -1,5 +1,5 @@/* -* (C) Copyright 2006-2007 +* (C) Copyright 2006-2009 * Stefan Roese, DENX Software Engineering, sr at denx.de. * * (C) Copyright 2006
@@ -35,7 +35,8 @@ DECLARE_GLOBAL_DATA_PTR;extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS ];/* info for FLASH chips */ -ulong flash_get_size (ulong base,int banknum); +extern void __ft_board_setup (void *blob,bd_t *bd); +ulong flash_get_size (ulong base,int banknum);int board_early_init_f (void ) {
@@ -513,3 +514,56 @@ int post_hotkeys_pressed(void)return 0 ;/* No hotkeys supported */ }#endif /* CONFIG_POST */ + +#if defined(CONFIG_NAND_U_BOOT ) +/* +* On NAND-booting sequoia, we need to patch the chips select numbers +* in the dtb (CS0 - NAND, CS3 - NOR) +*/ +void ft_board_setup (void *blob,bd_t *bd) +{ +int rc; +int len; +int nodeoffset; +struct fdt_property *prop; +u32 *reg; +char path[32 ]; + +/* First do common fdt setup */ +__ft_board_setup (blob, bd); + +/* And now configure NOR chip select to 3 instead of 0 */ +strcpy (path,"/plb/opb/ebc/nor_flash at 0,0" ); + nodeoffset =fdt_path_offset (blob, path); + prop =fdt_get_property_w (blob, nodeoffset,"reg" , &len); +if (prop ==NULL ) { +printf ("Unable to update NOR chip select for NAND booting\n" ); +return ; + } + reg = (u32 *)&prop->data[0 ]; + reg[0 ] =3 ; + rc =fdt_find_and_setprop (blob, path,"reg" , reg,3 *sizeof (u32),1 ); +if (rc) { +printf ("Unable to update property NOR mappings, err=%s\n" , +fdt_strerror (rc)); +return ; + } + +/* And now configure NAND chip select to 0 instead of 3 */ +strcpy (path,"/plb/opb/ebc/ndfc at 3,0" ); + nodeoffset =fdt_path_offset (blob, path); + prop =fdt_get_property_w (blob, nodeoffset,"reg" , &len); +if (prop ==NULL ) { +printf ("Unable to update NDFC chip select for NAND booting\n" ); +return ; + } + reg = (u32 *)&prop->data[0 ]; + reg[0 ] =0 ; + rc =fdt_find_and_setprop (blob, path,"reg" , reg,3 *sizeof (u32),1 ); +if (rc) { +printf ("Unable to update property NDFC mappings, err=%s\n" , +fdt_strerror (rc)); +return ; + } +} +#endif /* CONFIG_NAND_U_BOOT */
Signature · 1 line
1.6.2.2