Skip to contentSkip to conversation

cross-compilers

DISCUSSION Alex Chiang 20 participants 34 messages Apr 8, 2009 – Apr 11, 2009

lore
Share & tools
lore
#0 lore raw

Hi Andrew,

I've been using your cross-compilers here:

http://userweb.kernel.org/~akpm/cross-compilers/

for a long time now, but they're starting to suffer from a bit of neglect.

For example, the ia64 bundle, which used gcc 3.4.5 is now finally too old to build 2.6.30-rc1, because of a gcc bug related to labels.

Some of the newer bundles which use gcc 4.1.0 don't work because of a check in:

include/linux/compiler-gcc4.h

So my question is, do you still use those tools hosted on kernel.org or do you have a new solution these days?

If you have a new solution, I'd like to hear it, because I found those cross-compilers pretty useful, as I'm sure others did.

I spent most of yesterday fiddling about and managed to build an x86_64 host, ia64 target, gcc 4.2.3, glibc 2.3.6 bundle, and it all seems to work.

Is this something you're interested in? I could send you my tarball (and slowly work on some of the other archs).

If so, what were the crosstool build options you used? I'm specifically wondering about:

- should I am for lowest common denominator host or are you ok with x86_64 host

- did you statically link the toolchain? or is it dynamically linked?

Thanks.

/ac

#1 lore raw

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Good Luck,
Robin

Quoted 48 lines · Alex Chiang

Hi Andrew,

I've been using your cross-compilers here:

http://userweb.kernel.org/~akpm/cross-compilers/

for a long time now, but they're starting to suffer from a bit of neglect.

For example, the ia64 bundle, which used gcc 3.4.5 is now finally too old to build 2.6.30-rc1, because of a gcc bug related to labels.

Some of the newer bundles which use gcc 4.1.0 don't work because of a check in:

include/linux/compiler-gcc4.h

So my question is, do you still use those tools hosted on kernel.org or do you have a new solution these days?

If you have a new solution, I'd like to hear it, because I found those cross-compilers pretty useful, as I'm sure others did.

I spent most of yesterday fiddling about and managed to build an x86_64 host, ia64 target, gcc 4.2.3, glibc 2.3.6 bundle, and it all seems to work.

Is this something you're interested in? I could send you my tarball (and slowly work on some of the other archs).

If so, what were the crosstool build options you used? I'm specifically wondering about:

- should I am for lowest common denominator host or are you ok with x86_64 host

- did you statically link the toolchain? or is it dynamically linked?

Thanks.

/ac

--
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

Or shall we just recommend emdebian to everyone? :)

Thanks.

/ac

#3 lore raw

Hi Alex,

Quoted 3 lines · Alex Chiang

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

I don't know about Andrew, but Vegard might be interested:

http://www.kernel.org/pub/tools/crosstool/

#4 lore raw
In reply to Alex Chiang
Quoted 11 lines · On Tue, 7 Apr 2009 23:46:12 -0600 Alex Chiang <[email protected]> wrote:

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

Yes, the stuff I put together is very old and at the time crosstool was horridly hard to use. Hardly any combinations of anything actually worked - what you see there is about 5% of the toolchains I had to build. Apparently is has become better.

Quoted 1 line

Or shall we just recommend emdebian to everyone? :)

That sounds suspiciously like "thou shalt use debian". I was so traumatised by dselect ten years ago that I don't think I could afford the therapy bills.

#5 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Andrew" = Andrew Morton <[email protected]> writes:

Quoted 1 line · Alex Chiang
Quoted 1 line

Or shall we just recommend emdebian to everyone? :)

Andrew> That sounds suspiciously like "thou shalt use debian". I was Andrew> so traumatised by dselect ten years ago that I don't think I Andrew> could afford the therapy bills.

It's *much* better now :-) Or you could use Ubuntu.

--
Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au
http://www.ertos.nicta.com.au ERTOS within National ICT Australia
A university is a non-profit organisation only in the sense that it spends everything it gets ... Luca Turin.

#6 lore raw
In reply to Andrew Morton
Quoted 5 lines · Andrew Morton
Quoted 1 line

Or shall we just recommend emdebian to everyone? :)

That sounds suspiciously like "thou shalt use debian". I was so traumatised by dselect ten years ago that I don't think I could afford the therapy bills.

I think it's been about ten years since I last used dselect ;-)

Signature · 4 lines
Matthew Wilcox				Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours.  We can't possibly take such
a retrograde step."
#7 lore raw
In reply to Andrew Morton
Quoted 3 lines · Andrew Morton

That sounds suspiciously like "thou shalt use debian". I was so traumatised by dselect ten years ago that I don't think I could afford the therapy bills.

I hate dselect. I like debian though.

Fortunately dselect is history. It had one of the worst interfaces I have ever dealt with.

So I have no problem with everyone using debian. I am sure the non debian users do have a problem with that.

Signature · 1 line
Len Sorensen
#8 lore raw
In reply to Andrew Morton
Quoted 5 lines · Andrew Morton
Quoted 1 line

Or shall we just recommend emdebian to everyone? :)

That sounds suspiciously like "thou shalt use debian". I was so traumatised by dselect ten years ago that I don't think I could afford the therapy bills.

Sure. But try aptitude for a change.

Xav

#9 lore raw
In reply to Andrew Morton

* Andrew Morton <[email protected]>:

Quoted 10 lines · On Tue, 7 Apr 2009 23:46:12 -0600 Alex Chiang <[email protected]> wrote:
Quoted 9 lines

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

Quoted 6 lines
Quoted 3 lines

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

Ok, I'll work with Vegard on this.

Thanks.

/ac

#10 lore raw
Quoted 13 lines · Alex Chiang

* Andrew Morton <[email protected]>:

Quoted 12 lines · On Tue, 7 Apr 2009 23:46:12 -0600 Alex Chiang <[email protected]> wrote:
Quoted 11 lines

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

Quoted 6 lines
Quoted 2 lines

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

Ok, I'll work with Vegard on this.

Thanks.

Thank you. We should be able to have these tools
without using any specific $distro.

Signature · 1 line
~Randy
#11 lore raw
In reply to Alex Chiang
Quoted 10 lines · Alex Chiang

* Andrew Morton <[email protected]>:

Quoted 9 lines · On Tue, 7 Apr 2009 23:46:12 -0600 Alex Chiang <[email protected]> wrote:
Quoted 8 lines

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

Ok, I'll work with Vegard on this.

Is anybody building GCC trunk for the targets on a daily basis? I do build vax-linux (kernel-only) cross compilers quite often and the build script could probably also handle other targets.

MfG, JBG

Signature · 3 lines
      Jan-Benedict Glaw      [email protected]              +49-172-7608481
  Signature of:                        Lauf nicht vor Deinem Glück davon:
  the second  :                             Es könnte hinter Dir stehen!
#12 lore raw
Quoted 1 line

Is anybody building GCC trunk for the targets on a daily basis?

Not daily yet, but often anyway. Also binutils and kernel mainline.

Scripts: <http://git.infradead.org/users/segher/buildall.git>

Edit "config" for your local paths etc.
Run ./build [--kernel] <arch> [<some-defconfig>] to build a toolchain and a kernel, or only the kernel if --kernel is given. Run ./buildall to build a toolchain+kernel for all archs.

Segher

#13 lore raw
In reply to Andrew Morton
Quoted 9 lines · On Wednesday 08 April 2009 00:54:57 Andrew Morton wrote:
Quoted 8 lines · On Tue, 7 Apr 2009 23:46:12 -0600 Alex Chiang <[email protected]> wrote:

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

Quoted 6 lines
Quoted 3 lines

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

I already maintain cross compilers for my own use and the uClibc.org guys, along with little root filesystems and system images bootable under qemu:

http://uclibc.org/downloads/binaries

We're about to start doing nightly builds based on uClibc snapshots, I could easily get our server to do similar nightly builds based on the git version kernel headers and upload 'em to
http://kernel.org/pub/linux/kernel/people/landley/ if there's any interest...

Rob

Signature · 1 line
GPLv3 is to GPLv2 what Attack of the Clones is to The Empire Strikes Back.
#14 lore raw
In reply to Andrew Morton
Quoted 2 lines · Andrew Morton

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

I build wont say maintain many of the cross compilers used for linux-next. I can place them somehere. They're kernel only as I don't build libc.

I can build compilers for running on intel (32-bit) and powerpc (32-bit). If there is a need for other hosted compilers and people can give me access to an appropriate host/VM I'll build them too.

Yours Tony

#15 lore raw
Quoted 7 lines · On Thu, 9 Apr 2009 10:33:08 +1000 Tony Breeds <[email protected]> wrote:
Quoted 2 lines · Andrew Morton

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

I build wont say maintain many of the cross compilers used for linux-next. I can place them somehere.

Please do.

Several people have made suggestions but I don't think I've yet seen anything which is download-and-go. Many of them appear to be ways of tricking people into installing distributions which include dselect, but I'm awake to their little games.

#16 lore raw

* Andrew Morton <[email protected]>:

Quoted 8 lines · On Tony Breeds <[email protected]> wrote:
Quoted 7 lines
Quoted 2 lines · Andrew Morton

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

Quoted 7 lines
Quoted 2 lines

I build wont say maintain many of the cross compilers used for linux-next. I can place them somehere.

Please do.

Several people have made suggestions but I don't think I've yet seen anything which is download-and-go.

This is what I plan on doing with Vegard. I've already sent him mail offline.

Thanks.

#17 lore raw
Quoted 5 lines · Alex Chiang
Quoted 2 lines

Several people have made suggestions but I don't think I've yet seen anything which is download-and-go.

This is what I plan on doing with Vegard. I've already sent him mail offline.

Any chance to add cross compilers for linux-parisc and linux-parisc64 as well?

Helge

#18 lore raw

* Helge Deller <[email protected]>:

Quoted 9 lines
Quoted 5 lines · Alex Chiang
Quoted 2 lines

Several people have made suggestions but I don't think I've yet seen anything which is download-and-go.

This is what I plan on doing with Vegard. I've already sent him mail offline.

Any chance to add cross compilers for linux-parisc and linux-parisc64 as well?

I can try.

I'm about to leave on a two-week holiday so it'll be a while.

Thanks.

/ac

#19 lore raw
In reply to Andrew Morton
Quoted 1 line · Andrew Morton

Please do.

linux-next is built on powerpc so I needed to rebuild many of the compilers for intel.

While I was there I "updated to 4.3.3 and a 4.4.0 snapshot (20090216).

I've placed (well am placing):

x86_64 host, gcc 4.3.3, binutils 2.19.1:
alpha-linux
arm-linux
avr-linux
cris-linux
hppa64-linux
hppa-linux
i386-linux
m68k-linux
mipsel-linux
mips-linux
powerpc-linux
s390x-linux
sparc-linux
xtensa-linux

x86_64 host, gcc 4.4.0-20090216, binutils 2.19.1:
alpha-linux
arm-linux
avr-linux
cris-linux
hppa64-linux
i386-linux
m68k-linux
powerpc-linux
s390x-linux
sparc-linux

I haven't succeeded in builting a ia64 compiler, but I'll keep trying.

The i386,powerpc and sparc compilers are biarch and seem to build the 32/64 kernels appropriately.

I'm building i386 hosted compiiler ATM and I'll uplaod them when done.

Looking at the 4.3.3 compilers, asside from ia64 what arches are missing?

Quoted 4 lines

Several people have made suggestions but I don't think I've yet seen anything which is download-and-go. Many of them appear to be ways of tricking people into installing distributions which include dselect, but I'm awake to their little games.

These should all be relocatable, in that you can wack them anywhere (/opt/cross for me) and set your CROSS_COMPILE var and go.

For what it's worth these compilers were built with something derrived from the buildall scripts by Segher (http://git.infradead.org/users/segher/buildall.git)

Thanks Segher!

Yours Tony

#20 lore raw
Quoted 6 lines · Tony Breeds
Quoted 1 line · Andrew Morton

Please do.

linux-next is built on powerpc so I needed to rebuild many of the compilers for intel.

I've started a build-bot like script for binutils + GCC from CVS/GIT. If it builds through, I'll start uploading i686 hosted compilers later on today.

MfG, JBG

Signature · 3 lines
      Jan-Benedict Glaw      [email protected]              +49-172-7608481
Signature of:                   ...und wenn Du denkst, es geht nicht mehr,
the second  :                          kommt irgendwo ein Lichtlein her.
#21 lore raw
Quoted 11 lines · Jan-Benedict Glaw
Quoted 6 lines · Tony Breeds
Quoted 1 line · Andrew Morton

Please do.

linux-next is built on powerpc so I needed to rebuild many of the compilers for intel.

I've started a build-bot like script for binutils + GCC from CVS/GIT. If it builds through, I'll start uploading i686 hosted compilers later on today.

So... I've now build trunk kernel-only cross-compilers (hosted on i686) for these targets:

	alpha-linux.tar.bz2
	am33_2.0-linux.tar.bz2
	arm-linux.tar.bz2
	avr-linux.tar.bz2
	bfin-uclinux.tar.bz2
	cris-linux.tar.bz2
	frv-linux.tar.bz2
	h8300-elf.tar.bz2
	hppa64-linux.tar.bz2
	hppa-linux.tar.bz2
	i386-linux.tar.bz2
	ia64-linux.tar.bz2
	m32r-linux.tar.bz2
	m68k-linux.tar.bz2
	mips64-linux.tar.bz2
	mips-linux.tar.bz2
	powerpc64-linux.tar.bz2
	powerpc-linux.tar.bz2
	s390-linux.tar.bz2
	sh3-linux.tar.bz2
	sh64-linux.tar.bz2
	sparc64-linux.tar.bz2
	sparc-linux.tar.bz2
	v850e-linux.tar.bz2
	vax-linux.tar.bz2
	x86_64-linux.tar.bz2
	xtensa-linux.tar.bz2

They seem to build reliably, I'd easily build them once a day. If anybody is interested, I'll put them somewhere on lug-owl.de, or if you wish, on kernel.org .

Comments?

MfG, JBG

Signature · 3 lines
      Jan-Benedict Glaw      [email protected]              +49-172-7608481
Signature of:          GDB has a 'break' feature; why doesn't it have 'fix' too?
the second  :
#22 lore raw
Quoted 9 lines · Jan-Benedict Glaw
Quoted 3 lines · Jan-Benedict Glaw

I've started a build-bot like script for binutils + GCC from CVS/GIT. If it builds through, I'll start uploading i686 hosted compilers later on today.

So... I've now build trunk kernel-only cross-compilers (hosted on i686) for these targets:

       bfin-uclinux.tar.bz2

we already host up-to-date Blackfin compilers on the Blackfin website:
http://blackfin.uclinux.org/gf/project/toolchain/frs/

and we build for a variety of platforms ... atm that is x86, x86_64, ia64, and ppc

we also provide for simple distro integration:
- Gentoo has ebuilds in-tree
- deb based distros can use "deb
http://download.analog.com/27516/distros/debian stable main"
- rpms are available at the link above (fedora/suse/etc...)
- tarballs are available at the link above (everyone else)

not sure it can get much easier than that for installing the Blackfin toolchain ;)
-mike

#23 lore raw
Quoted 24 lines · Mike Frysinger
Quoted 9 lines · Jan-Benedict Glaw
Quoted 3 lines · Jan-Benedict Glaw

I've started a build-bot like script for binutils + GCC from CVS/GIT. If it builds through, I'll start uploading i686 hosted compilers later on today.

So... I've now build trunk kernel-only cross-compilers (hosted on i686) for these targets:

       bfin-uclinux.tar.bz2

we already host up-to-date Blackfin compilers on the Blackfin website:
http://blackfin.uclinux.org/gf/project/toolchain/frs/

and we build for a variety of platforms ... atm that is x86, x86_64, ia64, and ppc

we also provide for simple distro integration:
- Gentoo has ebuilds in-tree
- deb based distros can use "deb
http://download.analog.com/27516/distros/debian stable main"
- rpms are available at the link above (fedora/suse/etc...)
- tarballs are available at the link above (everyone else)

Quoted 2 lines

not sure it can get much easier than that for installing the Blackfin toolchain ;)

It can...
I'm after a one-stop place where we can locate cross compilers for all architectures that Linux supports so it is a much simpler task to actaully try to build our changes for as many architectures as we supports.

And please host them on kernel.org - preferably as an update of Vegards pages.

Sam

#24 lore raw
Quoted 28 lines · Sam Ravnborg
Quoted 24 lines · Mike Frysinger
Quoted 9 lines · Jan-Benedict Glaw
Quoted 3 lines · Jan-Benedict Glaw

I've started a build-bot like script for binutils + GCC from CVS/GIT. If it builds through, I'll start uploading i686 hosted compilers later on today.

So... I've now build trunk kernel-only cross-compilers (hosted on i686) for these targets:

       bfin-uclinux.tar.bz2

we already host up-to-date Blackfin compilers on the Blackfin website:
http://blackfin.uclinux.org/gf/project/toolchain/frs/

and we build for a variety of platforms ... atm that is x86, x86_64, ia64, and ppc

we also provide for simple distro integration:
 - Gentoo has ebuilds in-tree
 - deb based distros can use "deb
http://download.analog.com/27516/distros/debian stable main"
 - rpms are available at the link above (fedora/suse/etc...)
 - tarballs are available at the link above (everyone else)

Quoted 2 lines

not sure it can get much easier than that for installing the Blackfin toolchain ;)

Quoted 8 lines

It can...
I'm after a one-stop place where we can locate cross compilers for all architectures that Linux supports so it is a much simpler task to actaully try to build our changes for as many architectures as we supports.

And please host them on kernel.org - preferably as an update of Vegards pages.

whoever is maintaining the one location should simply mirror our tarballs (grabbing the 1 uclinux from the Debian link would be easiest) ... unlike the random ones people are compiling and posting, the binaries we post have gone through extensive testing -- both in terms of included testsuites (gcc/binutils/etc...) as well as actually building/running the kernel and userspace
-mike

#25 lore raw
In reply to Sam Ravnborg
Quoted 9 lines · Sam Ravnborg

On Fri, Apr 10, 2009 at 06:19:21AM -0400, Mike Frysinger wrote:

I'm after a one-stop place where we can locate cross compilers for all architectures that Linux supports so it is a much simpler task to actaully try to build our changes for as many architectures as we supports.

And please host them on kernel.org - preferably as an update of Vegards pages.

Known-working compilers, or the current latest-and-greatest for testing? I can provide the HEAD compilers easily.

MfG, JBG

Signature · 3 lines
      Jan-Benedict Glaw      [email protected]              +49-172-7608481
  Signature of:                          Zensur im Internet? Nein danke!
  the second  :
#26 lore raw
Quoted 8 lines · Jan-Benedict Glaw
Quoted 7 lines · Sam Ravnborg

On Fri, Apr 10, 2009 at 06:19:21AM -0400, Mike Frysinger wrote:

I'm after a one-stop place where we can locate cross compilers for all architectures that Linux supports so it is a much simpler task to actaully try to build our changes for as many architectures as we supports.

Quoted 5 lines
Quoted 2 lines

And please host them on kernel.org - preferably as an update of Vegards pages.

Known-working compilers, or the current latest-and-greatest for testing? I can provide the HEAD compilers easily.

There's /pub/scm/linux/kernel/git/viro/toolchain.git/ on kernel.org. Not updated for a while and it's Fedora-based set.

#27 lore raw
In reply to Sam Ravnborg
Quoted 5 lines · Sam Ravnborg

It can...
I'm after a one-stop place where we can locate cross compilers for all architectures that Linux supports so it is a much simpler task to actaully try to build our changes for as many architectures as we supports.

As long as nobody objects, I'll put snapshot compilers once a week to

http://www.kernel.org/pub/linux/kernel/people/jbglaw/cross_compilers

The first round is uploading right now, it should show up soon.

MfG, JBG

Signature · 3 lines
      Jan-Benedict Glaw      [email protected]              +49-172-7608481
Signature of:  The course of history shows that as a government grows, liberty
the second  : decreases."  (Thomas Jefferson)
#28 lore raw
In reply to Tony Breeds
Quoted 10 lines · Tony Breeds
Quoted 1 line · Andrew Morton

Please do.

linux-next is built on powerpc so I needed to rebuild many of the compilers for intel.

While I was there I "updated to 4.3.3 and a 4.4.0 snapshot (20090216).

I've placed (well am placing):

Where can I find them?

Sam

#29 lore raw
Quoted 5 lines · Sam Ravnborg
Quoted 4 lines · Tony Breeds
Quoted 1 line · Andrew Morton

Please do.

Quoted 8 lines
Quoted 6 lines

linux-next is built on powerpc so I needed to rebuild many of the compilers for intel.

While I was there I "updated to 4.3.3 and a 4.4.0 snapshot (20090216).

I've placed (well am placing):

Where can I find them?

D'oh Sorry http://bakeyournoodle.com/cross/

Yours Tony

#30 lore raw
In reply to Tony Breeds
Quoted 6 lines · Tony Breeds
Quoted 2 lines · Andrew Morton

We would benefit very much from having someone who actually maintains a suite of cross-compilers for kernel developers.

I build wont say maintain many of the cross compilers used for linux-next.  I can place them somehere.  They're kernel only as I don't build libc.

Any chance m68k-unknown-linux-gnu-gcc 4.0.2 can be updated, so we get proper m68k allmodconfig coverage again? Recently we had some allmodconfig breakage in mainline (not limited to m68k though) for stuff that had been in -next, but was
never tried with m68k allmodconfig due to the ICE, while I could reproduce it.

Mine is gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21), so far no ICEs
when not trying randconfig (strange that randconfig triggers those).

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

#31 lore raw
In reply to Alex Chiang
Quoted 7 lines · Alex Chiang

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

That is all I do.

Robin

#32 lore raw
In reply to Alex Chiang
Quoted 8 lines · Alex Chiang

* Robin Holt <[email protected]>:

Quoted 2 lines

Don't know if this answers your problem, but I use the tools from emdebian and they do not suffer from the problems you list below.

Wow, this seems _much_ simpler. Once you get the toolchain installed, all you have to do is set ARCH and CROSS_COMPILE appropriately?

Quoted 5 lines

I guess the question remains for Andrew. Since I pretty much did all the work needed to update his cross-compiler repo, is there still value in it?

Or shall we just recommend emdebian to everyone? :)

SUSE also has cross-gcc-* rpms. Typically for icecream, but they're relatively easy to extract into native format.

-Andi

Signature · 1 line
[email protected] -- Speaking for myself only.
#33 lore raw
In reply to Alex Chiang

On Tue, 7 Apr 2009 18:39:21 -0600, I waved a wand and this message magically appears in front of Alex Chiang:

Quoted 6 lines

I've been using your cross-compilers here:

http://userweb.kernel.org/~akpm/cross-compilers/

for a long time now, but they're starting to suffer from a bit of neglect.

Why bother?

You can use 'crossdev' to build your own cross-compilers instead. They can build either stable or unstable toolchains for your target architectures.

Signature · 3 lines
http://www.munted.org.uk

Fearsome grindings.