ppc4xx: Disable POST memory test on NAND-booting Sequoia
PATCH 1/1 ppc4xx: Disable POST memory test on NAND-booting Sequoia
Don't run the memory POST on the NAND-booting version. It will overwrite part of the U-Boot image which is already loaded from NAND to SDRAM. We were just lucky that it booted at all with this SDRAM test enabled.
Signed-off-by Stefan Roese <[email protected]>
--- include/configs/sequoia.h | 15 +++++++++++++-- 1 files changed, 13 insertions(+), 2 deletions(-)
include/configs/sequoia.h +13 -2
@@ -301,13 +301,24 @@#define CONFIG_SYS_POST_FPU_ON 0#endif +/* +* Don't run the memory POST on the NAND-booting version. It will +* overwrite part of the U-Boot image which is already loaded from NAND +* to SDRAM. +*/ +#if defined(CONFIG_NAND_U_BOOT ) +#define CONFIG_SYS_POST_MEMORY_ON 0 +#else +#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY +#endif +/* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ CONFIG_SYS_POST_CPU | \ CONFIG_SYS_POST_ETHER | \ - CONFIG_SYS_POST_FPU_ON | \ + CONFIG_SYS_POST_FPU_ON | \ CONFIG_SYS_POST_I2C | \ - CONFIG_SYS_POST_MEMORY | \ + CONFIG_SYS_POST_MEMORY_ON | \ CONFIG_SYS_POST_SPR | \ CONFIG_SYS_POST_UART)
Signature · 1 line
1.6.2.3