ppc4xx: Remove unused code for Sequoia NAND booting version
PATCH v2 1/1 ppc4xx: Remove unused code for Sequoia NAND booting version
The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not used at all. This patch changes it's define to the currently used value of 133333333 and removes the unnecessary code.
--- board/amcc/sequoia/sdram.c | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-)
board/amcc/sequoia/sdram.c +1 -5
@@ -44,7 +44,7 @@ extern void denali_core_search_data_eye(void);* for the 4k NAND boot image so define bus_frequency to 133MHz here * which is save for the refresh counter setup. */ -#define get_bus_freq (val) 133000000 +#define get_bus_freq (val) 133333333#endif /*************************************************************************
@@ -55,11 +55,7 @@ extern void denali_core_search_data_eye(void);phys_size_t initdram (int board_type) {#if !defined(CONFIG_NAND_U_BOOT ) || defined(CONFIG_NAND_SPL ) -#if !defined(CONFIG_NAND_SPL )ulong speed =get_bus_freq (0 ); -#else -ulong speed =133333333 ;/* 133MHz is on the safe side */ -#endif mtsdram (DDR0_02 ,0x00000000 );
Signature · 1 line
1.6.2.3
PATCH v2 1/1 ppc4xx: Remove unused code for Sequoia NAND booting version
Dear Stefan Roese,
Quoted 23 lines · In message <[email protected]> you wrote:
The current define of
get_bus_freq()in theCONFIG_NAND_SPL#ifdef is not used at all. This patch changes it's define to the currently used value of 133333333 and removes the unnecessary code.Signed-off-by Stefan Roese <[email protected]>--- board/amcc/sequoia/sdram.c | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-)board/amcc/sequoia/sdram.c +1
-1@@ -44,7 +44,7 @@ extern void denali_core_search_data_eye(void);* for the 4k NAND boot image so define bus_frequency to 133MHz here * which is save for the refresh counter setup. */ -#define get_bus_freq (val) 133000000 +#define get_bus_freq (val) 133333333#endif /*************************************************************************
board/amcc/sequoia/sdram.c extern void denali_core_search_data_eye(void); · line 60
Quoted 10 lines
board/amcc/sequoia/sdram.c +0
-4@@ -55,11 +55,7 @@ extern void denali_core_search_data_eye(void);phys_size_t initdram (int board_type) {#if !defined(CONFIG_NAND_U_BOOT ) || defined(CONFIG_NAND_SPL ) -#if !defined(CONFIG_NAND_SPL )ulong speed =get_bus_freq (0 ); -#else -ulong speed =133333333 ;/* 133MHz is on the safe side */ -#endif mtsdram (DDR0_02 ,0x00000000 );
Overwriting the function definition in "cpu/ppc4xx/speed.c" with a #define like here is pretty ugly.
Looking closer at this, I think the whole implementation of get_bus_freq() needs to be cleaned up. Why does get_bus_freq() need an agument? I don't see it used anywhere - not on 4xx nor on any other architecture.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I knew then (in 1970) that a 4-kbyte minicomputer would cost as much
as a house. So I reasoned that after college, I'd have to live
cheaply in an apartment and put all my money into owning a computer."
- Apple co-founder Steve Wozniak, EE Times, June 6, 1988, pg 45PATCH v2 1/1 ppc4xx: Remove unused code for Sequoia NAND booting version
Hi Wolfgang,
Quoted 7 lines · Wolfgang Denk
Overwriting the function definition in "
cpu/ppc4xx/speed.c" with a #define like here is pretty ugly.Looking closer at this, I think the whole implementation of
get_bus_freq()needs to be cleaned up. Why doesget_bus_freq()need an agument? I don't see it used anywhere - not on 4xx nor on any other architecture.
Agreed. But this is a bigger task. Perhaps their is some volunteer somewhere doing such a cleanup.
But back to my little patch. What exactly do you want me to do now? With my patch the situation changes definitely to the better (from my point of view). But I can easily drop this patch from my patch series if you really don't want this change.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================
PATCH v2 1/1 ppc4xx: Remove unused code for Sequoia NAND booting version
In reply to Wolfgang DenkQuoted 2 lines · Wolfgang Denk
Overwriting the function definition in "
cpu/ppc4xx/speed.c" with a #define like here is pretty ugly.
BTW: speed.c is not compiled in this NAND-booting version because of size reasons (4k limit). Forgot to mention this in my previous mail.
Best regards,
Stefan
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
=====================================================================