Skip to contentSkip to conversation

mac80211: remove IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT

PATCH In review Johannes Berg 2 participants 2 messages Apr 22, 2009 mac80211

lore
Share & tools
lore

Johannes Berg

author maintainer
#0 lore raw

PATCH 1/1 mac80211: remove IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT

Just setting IEEE80211_CONF_CHANGE_PS should be sufficient for changes in the power saving things. The driver already tells us whether it wants notification of dynps via the "have dynps support" hw flag.

---
 include/net/mac80211.h |   10 ++++------
 net/mac80211/wext.c    |    3 +--
 2 files changed, 5 insertions(+), 8 deletions(-)
include/net/mac80211.h +4 -6
@@ -532,8 +532,7 @@ enum ieee80211_conf_flags {
  * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
  * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
- * @IEEE80211_CONF_CHANGE_PS: the PS flag changed
- * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed
+ * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
@@ -544,10 +543,9 @@ enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
 	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
-	IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT	= BIT(5),
-	IEEE80211_CONF_CHANGE_POWER		= BIT(6),
-	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(7),
-	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(8),
+	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
+	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
+	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
 };
 
 /**
net/mac80211/wext.c +1 -2
@@ -622,8 +622,7 @@ static int ieee80211_ioctl_siwpower(stru
 	conf->dynamic_ps_timeout = timeout;
 
 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
-		ieee80211_hw_config(local,
-				    IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT);
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
 
 	ieee80211_recalc_ps(local, -1);
 
Reviewed-by on v1 1/1
#1 lore raw
Quoted 4 lines · Johannes Berg

Just setting IEEE80211_CONF_CHANGE_PS should be sufficient for changes in the power saving things. The driver already tells us whether it wants notification of dynps via the "have dynps support" hw flag.

I agree.

Quoted 1 line
Signature · 1 line
Kalle Valo