Nova-T 500 does not survive reboot
Hello all,
I am running an hg clone from a few days ago with firmware 1.20 on a 64-bit Ubuntu Intrepid (2.6.27 kernel).
I have noticed that for some time now the card/driver/firmware combination does not like warm reboots.
If I reboot the system and try to use any Nova-T 500 tuner, I immediately get the mt2060 I2C errors.
If I completely shut down the system, remove the power, then reboot, all is fine.
I have missed most of the linux-media traffic, I was still stuck on linux-dvb. Have I missed some discussions about this?
Thanks!
Nico
Quoted 18 lines · Nicolas Will <nico <at> youplala.net> writes:
Hello all,
I am running an hg clone from a few days ago with firmware 1.20 on a 64-bit Ubuntu Intrepid (2.6.27 kernel).
I have noticed that for some time now the card/driver/firmware combination does not like warm reboots.
If I reboot the system and try to use any Nova-T 500 tuner, I immediately get the mt2060 I2C errors.
If I completely shut down the system, remove the power, then reboot, all is fine.
I have missed most of the linux-media traffic, I was still stuck on linux-dvb. Have I missed some discussions about this?
Quoted 10 lines
Thanks!
Nico
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo <at> vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Nicholas
I posted the very same thing 3 days ago:
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973
This is something that has been occuring lately, since some months ago. I don't know when exactly was this bug introduced, but it has been in HG for a couple of months at least. I can remenber that other guy posted about this issue some time ago, but I can't find the link.
And for what I see, Janne Grunau is also having problems with the card. See what he have just posted...:
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973
Best regards,
Eduard Huguet
Quoted 20 lines · Eduard Huguet
Quoted 18 lines · Nicolas Will <nico <at> youplala.net> writes:
Hello all,
I am running an hg clone from a few days ago with firmware 1.20 on a 64-bit Ubuntu Intrepid (2.6.27 kernel).
I have noticed that for some time now the card/driver/firmware combination does not like warm reboots.
If I reboot the system and try to use any Nova-T 500 tuner, I immediately get the mt2060 I2C errors.
If I completely shut down the system, remove the power, then reboot, all is fine.
I have missed most of the linux-media traffic, I was still stuck on linux-dvb. Have I missed some discussions about this?
Quoted 7 lines
Quoted 3 lines
Thanks!
Nico
Hi, Nicholas
I posted the very same thing 3 days ago:
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973
Argh, I missed it (I don't really like gmame's archiving... I will need to get used to it).
I have the same :
Apr 29 22:42:41 favia kernel: [ 72.272045] ehci_hcd 0000:07:01.2: force halt; handhake ffffc20000666814 00004000 00000000 -> -110
then
Apr 29 22:43:02 favia kernel: [ 92.900094] mt2060 I2C write failed Apr 29 22:43:02 favia kernel: [ 92.905830] mt2060 I2C write failed (len=2) Apr 29 22:43:02 favia kernel: [ 92.905835] mt2060 I2C write failed (len=6) Apr 29 22:43:02 favia kernel: [ 92.905838] mt2060 I2C read failed Apr 29 22:43:02 favia kernel: [ 92.912552] mt2060 I2C read failed Apr 29 22:43:02 favia kernel: [ 92.920572] mt2060 I2C read failed Apr 29 22:43:02 favia kernel: [ 92.928552] mt2060 I2C read failed Apr 29 22:43:02 favia kernel: [ 92.936554] mt2060 I2C read failed Apr 29 22:43:02 favia kernel: [ 92.944552] mt2060 I2C read failed
...............
and at one point I get the following before I shut down
Apr 29 22:44:27 favia kernel: [ 177.818215] dvb-usb: could not submit URB no. 0 - get them all back Apr 29 22:44:27 favia kernel: [ 177.818222] dvb-usb: error while enabling fifo.
Quoted 6 lines
This is something that has been occuring lately, since some months ago. I don't know when exactly was this bug introduced, but it has been in HG for a couple of months at least. I can remenber that other guy posted about this issue some time ago, but I can't find the link.
I'm with that too. I was just really busy at the time to dig into it.
Quoted 5 lines
And for what I see, Janne Grunau is also having problems with the card. See what he have just posted...:
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/4973
I saw that one too, it arrived as I subscribed to the proper list.
I'm not directly concerned now, but I will be facing this too when I will want to upgrade my system to the current Ubuntu release.
Soooooo...
What can I/we do to help track/fix this?
I'm game for a bit of testing, within reason, though, at the system is in production.
Do you know if the issue is the same with a Nova-TD stick? If it is, then I could be able to use debugging as an excuse to buy one, and then add 2 tuners to the system when all is done :o)
Quoted 2 lines · Eduard Huguet
I can remenber that other guy posted about this issue some time ago, but I can't find the link.
http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/2423/focus=2591
I guess.
nico
getting used to gmame :o)
Quoted 15 lines · Nicolas Will <nico <at> youplala.net> writes:
Hello all,
I am running an hg clone from a few days ago with firmware 1.20 on a 64-bit Ubuntu Intrepid (2.6.27 kernel).
I have noticed that for some time now the card/driver/firmware combination does not like warm reboots.
If I reboot the system and try to use any Nova-T 500 tuner, I immediately get the mt2060 I2C errors.
If I completely shut down the system, remove the power, then reboot, all is fine.
Quoted 7 lines
I have missed most of the linux-media traffic, I was still stuck on linux-dvb. Have I missed some discussions about this?
Thanks!
Nico
Hi,
Any news on this? I'd like to try the URB patch someone mentioned, but I
can't find the link.
Best regards,
Eduard
A message that is not in the archive (sent off-list or not yet received): 1241530356.5394.2.camel@acropora
Quoted 7 lines
Quoted 4 lines
Hi,
Any news on this? I'd like to try the URB patch someone mentioned,
but I
can't find the link.
Quoted 10 lines
I am running a current dvb tree with this patch.
so far so good.
I did not find the time to check if I regained proper reboots, though. I know, sad excuse...
nico
I'll give it a try. Thanks for the tip!
Cheers,
Eduard