ARM: DaVinci: DM646x Video: DM646x display driver
v3 cover ARM: DaVinci: DM646x Video: DM646x display driver
Display driver for TI DM646x EVM
These patches add the display driver support for TI DM646x EVM. This patch set has been tested for basic display functionality for Composite and Component outputs.
This patch set consists of the updates based on the review comments by Hans Verkuil.
Patch 1: Display device platform and board setup Patch 2: VPIF driver
Patch 3: DM646x display driver
Patch 4: Makefile and config files modifications for Display
Some of the features like the HBI/VBI support are not yet implemented. Also there are some known issues in the code implementation like fine tuning to be done to TRY_FMT ioctl.The USERPTR usage has not been tested extensively.
-Chaithrika
Hi All,
Do you have any review comments on this patch set?
Regards,
Chaithrika
Quoted 33 lines
-----Original Message-----
From: Chaithrika U S [mailto:[email protected]]
Sent: Friday, May 08, 2009 6:55 PM
To: [email protected]
Cc: [email protected]; Manjunath Hadli; Brijesh Jadav; Chaithrika U S
Subject: [PATCH v3 0/4] ARM: DaVinci: DM646x Video: DM646x display driverDisplay driver for TI DM646x EVM
Signed-off-by Manjunath Hadli <[email protected]>Signed-off-by Brijesh Jadav <[email protected]>Signed-off-by Chaithrika U S <[email protected]>These patches add the display driver support for TI DM646x EVM. This patch set has been tested for basic display functionality for Composite and Component outputs.
This patch set consists of the updates based on the review comments by Hans Verkuil.
Patch 1: Display device platform and board setup Patch 2: VPIF driver
Patch 3: DM646x display driver
Patch 4:Makefileand config files modifications for DisplaySome of the features like the HBI/VBI support are not yet implemented. Also there are some known issues in the code implementation like fine tuning to be done to
TRY_FMTioctl.The USERPTR usage has not been tested extensively.-Chaithrika
Hans Verkuil
Reviewed-byQuoted 3 lines · On Thursday 21 May 2009 08:12:57 chaithrika wrote:
Hi All,
Do you have any review comments on this patch set?
I'm happy with these patches!
There is one thing that can be improved, though. It is really an enhancement and does not prevent this from being merged.
Currently the isr routine refuses to switch to the next frame if the dma queue is empty. However, I see no reason for this: it should always go to that frame regardless and keep that until new frames are queued. I've made this change in the (very old) driver I use at work, but this should become standard behavior.
Regards,
Hans
Quoted 42 lines
Regards,
ChaithrikaQuoted 27 lines
-----Original Message-----
From: Chaithrika U S [mailto:[email protected]]
Sent: Friday, May 08, 2009 6:55 PM
To: [email protected]
Cc: [email protected]; Manjunath Hadli; Brijesh Jadav; Chaithrika U S
Subject: [PATCH v3 0/4] ARM: DaVinci: DM646x Video: DM646x display driverDisplay driver for TI DM646x EVM
Signed-off-by Manjunath Hadli <[email protected]>Signed-off-by Brijesh Jadav <[email protected]>Signed-off-by Chaithrika U S <[email protected]>These patches add the display driver support for TI DM646x EVM. This patch set has been tested for basic display functionality for Composite and Component outputs.
This patch set consists of the updates based on the review comments by Hans Verkuil.
Patch 1: Display device platform and board setup Patch 2: VPIF driver
Patch 3: DM646x display driver
Patch 4:Makefileand config files modifications for DisplayQuoted 6 lines
Some of the features like the HBI/VBI support are not yet implemented. Also there are some known issues in the code implementation like fine tuning to be done to
TRY_FMTioctl.The USERPTR usage has not been tested extensively.-Chaithrika
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 1 line
Hans Verkuil - video4linux developer - sponsored by TANDBERG
Hans,
Quoted 9 lines
-----Original Message-----
From: Hans Verkuil [mailto:[email protected]]
Sent: Thursday, May 21, 2009 7:45 PM
To: chaithrika
Cc: [email protected]; davinci-linux-open- [email protected]; 'Manjunath Hadli'; 'Brijesh Jadav'
Subject: Re: [PATCH v3 0/4] ARM: DaVinci: DM646x Video: DM646x display driver
Quoted 9 lines
Quoted 3 lines · On Thursday 21 May 2009 08:12:57 chaithrika wrote:
Hi All,
Do you have any review comments on this patch set?
Reviewed-by Hans Verkuil <[email protected]>I'm happy with these patches!
Thanks!
Quoted 4 lines
There is one thing that can be improved, though. It is really an enhancement
and does not prevent this from being merged.
Quoted 10 lines
Currently the isr routine refuses to switch to the next frame if the dma
queue is empty. However, I see no reason for this: it should always go to
that frame regardless and keep that until new frames are queued. I've made
this change in the (very old) driver I use at work, but this should become
standard behavior.
OK. I will look into this.
Thanks,
Chaithrika
Quoted 56 lines
Regards,
Hans
Quoted 9 lines
Regards,
ChaithrikaQuoted 5 lines
-----Original Message-----
From: Chaithrika U S [mailto:[email protected]]
Sent: Friday, May 08, 2009 6:55 PM
To: [email protected]
Cc: [email protected]; ManjunathHadli;
Quoted 10 lines
Quoted 10 lines
Brijesh Jadav; Chaithrika U S
Subject: [PATCH v3 0/4] ARM: DaVinci: DM646x Video: DM646x display driverDisplay driver for TI DM646x EVM
Signed-off-by Manjunath Hadli <[email protected]>Signed-off-by Brijesh Jadav <[email protected]>Signed-off-by Chaithrika U S <[email protected]>Quoted 5 lines
Quoted 5 lines
These patches add the display driver support for TI DM646x EVM. This patch set has been tested for basic display functionality for Composite and Component outputs.
This patch set consists of the updates based on the review comments
by
Quoted 8 lines
Quoted 8 lines
Hans Verkuil.
Patch 1: Display device platform and board setup Patch 2: VPIF driver
Patch 3: DM646x display driver
Patch 4:Makefileand config files modifications for DisplaySome of the features like the HBI/VBI support are not yet
implemented.
Quoted 2 lines
Quoted 2 lines
Also there are some known issues in the code implementation like fine tuning to be done to
TRY_FMTioctl.The USERPTR usage has notbeen
Quoted 6 lines
Quoted 3 lines
tested extensively.
-Chaithrika
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
Quoted 2 lines
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html--
Hans Verkuil - video4linux developer - sponsored by TANDBERG