Skip to contentSkip to conversation

mmc: Add fsl,esdhc as a valid compatible to bind against

PATCH Applied Kumar Gala 3 participants 4 messages May 8, 2009 – May 22, 2009

Subsystems (2)
lore
Share & tools
lore

Kumar Gala

author
#0 lore raw

PATCH 1/1 mmc: Add fsl,esdhc as a valid compatible to bind against

We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it.

---
 drivers/mmc/host/sdhci-of.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/mmc/host/sdhci-of.c +1 -0
index 3ff4ac3..09cc597 100644
@@ -277,6 +277,7 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev)
 static const struct of_device_id sdhci_of_match[] = {
 	{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
 	{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
+	{ .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
 	{ .compatible = "generic-sdhci", },
 	{},
 };
Signature · 1 line
1.6.0.6
#1 lore raw
Quoted 2 lines · Kumar Gala

We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it.

I was going to NAK this based on its non-sensical changelog, but going backward you're not the first to be going forward :)

cheers

author
#2 lore raw
In reply to Kumar Gala
Quoted 7 lines · Kumar Gala

We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it.

---
drivers/mmc/host/sdhci-of.c | 1 +

1 files changed, 1 insertions(+), 0 deletions(-)

Any feedback or possibility of picking this up.

- k

Quoted 22 lines
drivers/mmc/host/sdhci-of.c +1 -0
index 3ff4ac3..09cc597 100644
@@ -277,6 +277,7 @@ static int __devexit sdhci_of_remove(struct  
 of_device *ofdev)
 static const struct of_device_id sdhci_of_match[] = {
 	{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
 	{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
+	{ .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
 	{ .compatible = "generic-sdhci", },
 	{},

};

Signature · 6 lines
1.6.0.6

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
#3 lore raw
In reply to Kumar Gala
Quoted 5 lines · On Fri, 8 May 2009 08:52:49 -0500 Kumar Gala <[email protected]> wrote:

We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it.

---

Applied.

Rgds

Signature · 6 lines
     -- Pierre Ossman

  WARNING: This correspondence is being monitored by the
  Swedish government. Make sure your server uses encryption
  for SMTP traffic and consider using PGP for end-to-end
  encryption.