Skip to contentSkip to conversation

bluez 4.x questions, SCO stops

PATCH In review Brock Denson 4 participants 6 messages May 7, 2009 – May 11, 2009 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,
I am having a problem with SCO stopping after 1 minute that I would really appreciate some help with. I can connect to the headset, query responses, etc, but when I start sco either via a dbus-send command or with the test-telephony play <> command then after 30 seconds I get a dbus timeout and then 30 more seconds later the SCO will stop. I have air-traced the session and can see that the host is sending silence while SCO is being transmitted, so it seems functional, but I am sure I am missing something. I have included just about everything I can think of below in the hopes that someone has a few minutes to point out the problem. Distribution is FC10.

---- asoundrc file (from bluez source)

pcm.headset {
	type bluetooth
	device "00:0b:2e:85:1e:53"
	profile voice
}

ctl.headset {
type bluetooth
}

---- audio.conf -------------------
[General]
SCORouting=PCM
[Headset]
HFP=true
MaxConnections=1

---- Userland ---------------------
[brockd@demo3 bluez]$ test/test-telephony play 00:0b:2e:85:1e:53 Traceback (most recent call last):
File "test/test-telephony", line 91, in <module>
headset.Play()
File "/usr/lib/python2.5/site-packages/dbus/proxies.py", line 68, in
__call__
return self._proxy_method(*args, **keywords)
File "/usr/lib/python2.5/site-packages/dbus/proxies.py", line 140, in
__call__

    **keywords)

File "/usr/lib/python2.5/site-packages/dbus/connection.py", line 630,
in call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

---- HCI land ---------------------
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
< HCI Command: Disconnect (0x01|0x0006) plen 3

Quoted 5 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Disconn Complete (0x05) plen 4 HCI Event: Max Slots Change (0x1b) plen 3 HCI Event: Mode Change (0x14) plen 6
HCI Event: Mode Change (0x14) plen 6

< HCI Command: Add SCO Connection (0x01|0x0007) plen 4

Quoted 5 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Max Slots Change (0x1b) plen 3 HCI Event: Connect Complete (0x03) plen 11 ACL data: handle 38 flags 0x02 dlen 17
ACL data: handle 38 flags 0x01 dlen 2

    L2CAP(d): cid 0x0040 len 15 [psm 0]
< ACL data: handle 38 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 0]
Quoted 3 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Mode Change (0x14) plen 6
HCI Event: Mode Change (0x14) plen 6

< HCI Command: Disconnect (0x01|0x0006) plen 3

Quoted 5 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Disconn Complete (0x05) plen 4 HCI Event: Max Slots Change (0x1b) plen 3 HCI Event: Mode Change (0x14) plen 6
HCI Event: Mode Change (0x14) plen 6

< HCI Command: Add SCO Connection (0x01|0x0007) plen 4

Quoted 5 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Max Slots Change (0x1b) plen 3 HCI Event: Connect Complete (0x03) plen 11 ACL data: handle 38 flags 0x02 dlen 17
ACL data: handle 38 flags 0x01 dlen 2

    L2CAP(d): cid 0x0040 len 15 [psm 0]
< ACL data: handle 38 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 0]
Quoted 3 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Mode Change (0x14) plen 6
HCI Event: Mode Change (0x14) plen 6

< HCI Command: Disconnect (0x01|0x0006) plen 3

Quoted 6 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Disconn Complete (0x05) plen 4 HCI Event: Max Slots Change (0x1b) plen 3 HCI Event: Mode Change (0x14) plen 6
HCI Event: Mode Change (0x14) plen 6
ACL data: handle 38 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 0]
< ACL data: handle 38 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 0]
Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0041
< ACL data: handle 38 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0041
Quoted 4 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Mode Change (0x14) plen 6
HCI Event: Disconn Complete (0x05) plen 4 HCI Event: Connect Request (0x04) plen 10

< HCI Command: Accept Connection Request (0x01|0x0009) plen 7

Quoted 3 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Connect Complete (0x03) plen 11
HCI Event: Page Scan Repetition Mode Change (0x20) plen 7

< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2

Quoted 3 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Max Slots Change (0x1b) plen 3 HCI Event: Command Status (0x0f) plen 4

< HCI Command: Remote Name Request (0x01|0x0019) plen 10

Quoted 4 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Read Remote Supported Features (0x0b) plen 11 HCI Event: Remote Name Req Complete (0x07) plen 255 HCI Event: Link Key Request (0x17) plen 6

< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22

Quoted 2 lines

HCI Event: Command Complete (0x0e) plen 10 ACL data: handle 38 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 1 scid 0x0040

< ACL data: handle 38 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 38 flags 0x02 dlen 10
L2CAP(s): Info req: type 2

Quoted 3 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 16

L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 38 flags 0x02 dlen 16

    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful
Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 48 
< ACL data: handle 38 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      MTU 48 
< ACL data: handle 38 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
Quoted 3 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 14

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
Quoted 1 line

ACL data: handle 38 flags 0x02 dlen 24

    L2CAP(d): cid 0x0040 len 20 [psm 1]
        SDP SSA Req: tid 0x1 len 0xf
          pat uuid-32 0x111f (Handsfree AG)
          max 38
          aid(s) 0x0004 (ProtocolDescList)
          cont 00
< ACL data: handle 38 flags 0x02 dlen 33
    L2CAP(d): cid 0x0040 len 29 [psm 1]
        SDP SSA Rsp: tid 0x1 len 0x18
          count 21
          record #0
              aid 0x0004 (ProtocolDescList)
                 < < uuid-16 0x0100 (L2CAP) > <
                 uuid-16 0x0003 (RFCOMM) uint 0xd > >
          cont 00
Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 38 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 3 scid 0x0041
< ACL data: handle 38 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0
      Connection successful
Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 132 
< ACL data: handle 38 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
      MTU 132 
< ACL data: handle 38 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
      MTU 1013 
Quoted 3 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 18

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      MTU 1013 
Quoted 1 line

ACL data: handle 38 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c 
< ACL data: handle 38 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 
Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 18

L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 26 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 126 max_retrans 0 credits 0
< ACL data: handle 38 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 dlci 26 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size 126 max_retrans 0 credits 7

Quoted 2 lines

HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 8

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 26 pf 1 ilen 0 fcs 0xe7 

< HCI Command: Authentication Requested (0x01|0x0011) plen 2

Quoted 2 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Auth Complete (0x06) plen 3

< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3

Quoted 2 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Encrypt Change (0x08) plen 4

< ACL data: handle 38 flags 0x02 dlen 8

    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 26 pf 1 ilen 0 fcs 0x2c 
< HCI Command: Switch Role (0x02|0x000b) plen 7
< ACL data: handle 38 flags 0x02 dlen 12
    L2CAP(d): cid 0x0041 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
Quoted 5 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Role Change (0x12) plen 8
HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 12

    L2CAP(d): cid 0x0040 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
Quoted 1 line

ACL data: handle 38 flags 0x02 dlen 12

    L2CAP(d): cid 0x0040 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
Quoted 1 line

ACL data: handle 38 flags 0x02 dlen 9

    L2CAP(d): cid 0x0040 len 5 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 0 fcs 0xf8 credits 15
< ACL data: handle 38 flags 0x02 dlen 12
    L2CAP(d): cid 0x0041 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len 0
< ACL data: handle 38 flags 0x02 dlen 9
    L2CAP(d): cid 0x0041 len 5 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 0 fcs 0x22 credits 33
Quoted 3 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle 38 flags 0x02 dlen 19

    L2CAP(d): cid 0x0040 len 15 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 11 fcs 0xe4 
< ACL data: handle 38 flags 0x02 dlen 22
    L2CAP(d): cid 0x0041 len 18 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 14 fcs 0x3e 
< ACL data: handle 38 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
Quoted 4 lines

HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Mode Change (0x14) plen 6
HCI Event: Disconn Complete (0x05) plen 4

---- Bluetoothd ------------------
[brockd@demo3 bluez]$ sudo bluetoothd -n -d bluetoothd[25721]: Bluetooth daemon
bluetoothd[25721]: Enabling debug information bluetoothd[25721]: parsing main.conf
bluetoothd[25721]: discovto=0
bluetoothd[25721]: pairto=0
bluetoothd[25721]: pageto=8192
bluetoothd[25721]: name=%h-%d
bluetoothd[25721]: class=0x000100
bluetoothd[25721]: inqmode=0
bluetoothd[25721]: Key file does not have key 'DeviceID' bluetoothd[25721]: Starting SDP server
bluetoothd[25721]: Loading plugins /usr/lib/bluetooth/plugins bluetoothd[25721]: register_interface: path /org/bluez/25721/any bluetoothd[25721]: Registered interface org.bluez.Service on path /org/bluez/25721/any
bluetoothd[25721]: Parsing /etc/bluetooth/network.conf failed: No such file or directory
bluetoothd[25721]: Config options: InterfacePrefix=bnep%d, PANU_Script=(null), GN_Script=(null), NAP_Script=(null), GN_Interface=pan0, NAP_Interface=pan1, Security=true bluetoothd[25721]: bridge pan0 created
bluetoothd[25721]: Parsing /etc/bluetooth/input.conf failed: No such file or directory
bluetoothd[25721]: Unix socket created: 13 bluetoothd[25721]: audio.conf: Key file does not have key 'MaxConnected' bluetoothd[25721]: Telephony plugin initialized bluetoothd[25721]: HFP AG features: "Ability to reject a call" "Enhanced call status" "Extended Error Result Codes" bluetoothd[25721]: HCI dev 0 registered
bluetoothd[25721]: child 25724 forked
bluetoothd[25721]: Agent registered for hci0 at :1.32:/org/bluez/agent/hci0
bluetoothd[25721]: HCI dev 0 up
bluetoothd[25721]: Starting security manager 0 bluetoothd[25721]: register_interface: path /org/bluez/25721/hci0 bluetoothd[25721]: Registered interface org.bluez.Service on path /org/bluez/25721/hci0
bluetoothd[25721]: network_server_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: Adding record with handle 0x10000 bluetoothd[25721]: Record pattern UUID 0000000f-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001115-0000-1000-8000-00805f9 bluetoothd[25721]: register_server_record: got record id 0x10000 bluetoothd[25721]: Registered interface org.bluez.NetworkPeer on path /org/bluez/25721/hci0
bluetoothd[25721]: network_server_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: Adding record with handle 0x10001 bluetoothd[25721]: Record pattern UUID 0000000f-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001117-0000-1000-8000-00805f9 bluetoothd[25721]: register_server_record: got record id 0x10001 bluetoothd[25721]: Registered interface org.bluez.NetworkHub on path /org/bluez/25721/hci0
bluetoothd[25721]: network_server_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: Adding record with handle 0x10002 bluetoothd[25721]: Record pattern UUID 0000000f-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001116-0000-1000-8000-00805f9 bluetoothd[25721]: register_server_record: got record id 0x10002 bluetoothd[25721]: Registered interface org.bluez.NetworkRouter on path /org/bluez/25721/hci0
bluetoothd[25721]: proxy_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: Registered interface org.bluez.SerialProxyManager on path /org/bluez/25721/hci0
bluetoothd[25721]: headset_server_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: audio.conf: Key file does not have key 'Master' bluetoothd[25721]: Adding record with handle 0x10003 bluetoothd[25721]: Record pattern UUID 00000003-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001108-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001112-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001203-0000-1000-8000-00805f9 bluetoothd[25721]: Adding record with handle 0x10004 bluetoothd[25721]: Record pattern UUID 00000003-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000111e-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000111f-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001203-0000-1000-8000-00805f9 bluetoothd[25721]: a2dp_server_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: audio.conf: Key file does not have key 'Disable' bluetoothd[25721]: audio.conf: Key file does not have group 'A2DP' bluetoothd[25721]: audio.conf: Key file does not have group 'A2DP' bluetoothd[25721]: audio.conf: Key file does not have group 'A2DP' bluetoothd[25721]: audio.conf: Key file does not have group 'A2DP' bluetoothd[25721]: audio.conf: Key file does not have key 'Master' bluetoothd[25721]: SEP 0x179b5b0 registered: type:0 codec:0 seid:1 bluetoothd[25721]: Adding record with handle 0x10005 bluetoothd[25721]: Record pattern UUID 00000019-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000110a-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000110d-0000-1000-8000-00805f9 bluetoothd[25721]: avrcp_server_probe: path /org/bluez/25721/hci0 bluetoothd[25721]: audio.conf: Key file does not have key 'Master' bluetoothd[25721]: Adding record with handle 0x10006 bluetoothd[25721]: Record pattern UUID 00000017-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000110c-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000110e-0000-1000-8000-00805f9 bluetoothd[25721]: Adding record with handle 0x10007 bluetoothd[25721]: Record pattern UUID 00000017-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[25721]: Record pattern UUID 0000110e-0000-1000-8000-00805f9 bluetoothd[25721]: Creating device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
00001108-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: Registered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111E-0000-1000-8000-00805F9B34FB
bluetoothd[25721]: headset_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Registered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Found Headset record
bluetoothd[25721]: Discovered Headset service on RFCOMM channel 2 bluetoothd[25721]: Registered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Adapter /org/bluez/25721/hci0 has been enabled bluetoothd[25721]: child 25724 exited
bluetoothd[25721]: Computer is classified as laptop bluetoothd[25721]: Current device class is 0x4a010c bluetoothd[25721]: Setting 0x00010c for major/minor device class bluetoothd[25721]: Removing device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: input_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: create_device(00:0b:2e:85:1e:53) bluetoothd[25721]: adapter_create_device(00:0b:2e:85:1e:53) bluetoothd[25721]: Creating device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: error updating services: Host is down (112)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: pin_code_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
requesting agent authentication
bluetoothd[25721]: link_key_notify (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53, type=0)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: local auth 0x00 and remote auth 0xff bluetoothd[25721]: storing link key of type 0x00 bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: setting timer for reverse service discovery bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: hcid_dbus_bonding_process_complete: no pending auth request
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111E-0000-1000-8000-00805F9B34FB
bluetoothd[25721]: Registered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Registered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[25721]: authorize request was sent for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111e-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
00001108-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: headset_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Registered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Headset record
bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Accepted headset connection from 00:0B:2E:85:1E:53 for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Received AT+BRSF=26
bluetoothd[25721]: HFP HF features: "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control" bluetoothd[25721]: Received AT+CIND=?
bluetoothd[25721]: Received AT+CIND?
bluetoothd[25721]: Received AT+CMER=3, 0, 0, 1 bluetoothd[25721]: Event reporting (CMER): mode=3, ind=1 bluetoothd[25721]: HFP Service Level Connection established bluetoothd[25721]: telephony-dummy: device 0x179c5e8 connected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED bluetoothd[25721]: Received AT+VGS=08
bluetoothd[25721]: telephony-dummy: device 0x179c5e8 disconnected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_CONNECTED -> HEADSET_STATE_DISCONNECTED
bluetoothd[25721]: Disconnected from 00:0B:2E:85:1E:53, /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: stored link key type = 0x00 bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: hcid_dbus_bonding_process_complete: no pending auth request
bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[25721]: authorize request was sent for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Accepted headset connection from 00:0B:2E:85:1E:53 for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Received AT+BRSF=26
bluetoothd[25721]: HFP HF features: "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control" bluetoothd[25721]: telephony-dummy: device 0x179c5e8 disconnected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_DISCONNECTED bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: stored link key type = 0x00 bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: hcid_dbus_bonding_process_complete: no pending auth request
bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[25721]: authorize request was sent for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Accepted headset connection from 00:0B:2E:85:1E:53 for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Received AT+BRSF=26
bluetoothd[25721]: HFP HF features: "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control" bluetoothd[25721]: Removing device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Headset unregistered while device was connected! bluetoothd[25721]: telephony-dummy: device 0x179c5e8 disconnected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_DISCONNECTED bluetoothd[25721]: Unregistered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: input_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: No matching connection found for handle 38 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: adapter_create_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Creating device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: pin_code_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
requesting agent authentication
bluetoothd[25721]: /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
canceling authentication request
bluetoothd[25721]: Removing temporary device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Removing device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: adapter_create_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Creating device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: pin_code_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
requesting agent authentication
bluetoothd[25721]: link_key_notify (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53, type=0)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: local auth 0x00 and remote auth 0xff bluetoothd[25721]: storing link key of type 0x00 bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: setting timer for reverse service discovery bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: hcid_dbus_bonding_process_complete: no pending auth request
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111E-0000-1000-8000-00805F9B34FB
bluetoothd[25721]: Registered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Registered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[25721]: authorize request was sent for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111e-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
00001108-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: headset_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Registered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Headset record
bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Accepted headset connection from 00:0B:2E:85:1E:53 for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Received AT+BRSF=26
bluetoothd[25721]: HFP HF features: "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control" bluetoothd[25721]: Received AT+CIND=?
bluetoothd[25721]: Received AT+CIND?
bluetoothd[25721]: Received AT+CMER=3, 0, 0, 1 bluetoothd[25721]: Event reporting (CMER): mode=3, ind=1 bluetoothd[25721]: HFP Service Level Connection established bluetoothd[25721]: telephony-dummy: device 0x17960d0 connected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED bluetoothd[25721]: Received AT+VGS=08
bluetoothd[25721]: telephony-dummy: device 0x17960d0 disconnected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_CONNECTED -> HEADSET_STATE_DISCONNECTED
bluetoothd[25721]: Removing device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: input_remove: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Unregistered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: adapter_create_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Creating device /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: pin_code_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
requesting agent authentication
bluetoothd[25721]: link_key_notify (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53, type=0)
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: local auth 0x00 and remote auth 0xff bluetoothd[25721]: storing link key of type 0x00 bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: setting timer for reverse service discovery bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: hcid_dbus_bonding_process_complete: no pending auth request
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111E-0000-1000-8000-00805F9B34FB
bluetoothd[25721]: Registered interface org.bluez.Serial on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Registered interface org.bluez.Headset on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[25721]: authorize request was sent for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Probe drivers for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
0000111e-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: serial_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
00001108-0000-1000-8000-00805f9b34fb
bluetoothd[25721]: headset_probe: path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Registered interface org.bluez.Input on path /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Found Headset record
bluetoothd[25721]: Found Handsfree record
bluetoothd[25721]: Discovered Handsfree service on RFCOMM channel 1 bluetoothd[25721]: Accepted headset connection from 00:0B:2E:85:1E:53 for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Received AT+BRSF=26
bluetoothd[25721]: HFP HF features: "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control" bluetoothd[25721]: Received AT+CIND=?
bluetoothd[25721]: Received AT+CIND?
bluetoothd[25721]: Received AT+CMER=3, 0, 0, 1 bluetoothd[25721]: Event reporting (CMER): mode=3, ind=1 bluetoothd[25721]: HFP Service Level Connection established bluetoothd[25721]: telephony-dummy: device 0x1794b48 connected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_CONNECTED bluetoothd[25721]: Received AT+VGS=08
bluetoothd[25721]: Received AT+VGS=09
bluetoothd[25721]: Received AT+VGS=11
bluetoothd[25721]: Received AT+VGS=09
bluetoothd[25721]: Received AT+VGS=07
bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS
bluetoothd[25721]: Received AT+VGS=07
bluetoothd[25721]: connect(): Connection timed out (110) bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_PLAY_IN_PROGRESS -> HEADSET_STATE_CONNECTED bluetoothd[25721]: No matching connection found for handle 42 bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS
bluetoothd[25721]: Received AT+VGS=07
bluetoothd[25721]: connect(): Connection timed out (110) bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_PLAY_IN_PROGRESS -> HEADSET_STATE_CONNECTED bluetoothd[25721]: No matching connection found for handle 42 bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_CONNECTED -> HEADSET_STATE_PLAY_IN_PROGRESS
bluetoothd[25721]: Received AT+VGS=07
bluetoothd[25721]: connect(): Connection timed out (110) bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_PLAY_IN_PROGRESS -> HEADSET_STATE_CONNECTED bluetoothd[25721]: No matching connection found for handle 42 bluetoothd[25721]: telephony-dummy: device 0x1794b48 disconnected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_CONNECTED -> HEADSET_STATE_DISCONNECTED
bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: link_key_request (sba=00:02:5B:00:F3:00, dba=00:0B:2E:85:1E:53)
bluetoothd[25721]: kernel auth requirements = 0x00 bluetoothd[25721]: stored link key type = 0x00 bluetoothd[25721]: hcid_dbus_bonding_process_complete: status=00 bluetoothd[25721]: adapter_get_device(00:0B:2E:85:1E:53) bluetoothd[25721]: hcid_dbus_bonding_process_complete: no pending auth request
bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53: HEADSET_STATE_DISCONNECTED -> HEADSET_STATE_CONNECT_IN_PROGRESS
bluetoothd[25721]: authorize request was sent for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Accepted headset connection from 00:0B:2E:85:1E:53 for /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53 bluetoothd[25721]: Received AT+BRSF=26
bluetoothd[25721]: HFP HF features: "Call waiting and 3-way calling" "Voice recognition activation" "Remote volume control" bluetoothd[25721]: telephony-dummy: device 0x1794b48 disconnected bluetoothd[25721]: State changed /org/bluez/25721/hci0/dev_00_0B_2E_85_1E_53:
HEADSET_STATE_CONNECT_IN_PROGRESS -> HEADSET_STATE_DISCONNECTED

#1 lore raw

Hi Brock,

Quoted 10 lines · Brock Denson

I am having a problem with SCO stopping after 1 minute that I would really appreciate some help with. I can connect to the headset, query responses, etc, but when I start sco either via a dbus-send command or with the test-telephony play <> command then after 30 seconds I get a dbus timeout and then 30 more seconds later the SCO will stop. I have air-traced the session and can see that the host is sending silence while SCO is being transmitted, so it seems functional, but I am sure I am missing something. I have included just about everything I can think of below in the hopes that someone has a few minutes to point out the problem. Distribution is FC10.

You've got several occurences of the following in the logs:
bluetoothd[25721]: connect(): Connection timed out (110)

I'm pretty sure that's coming for the SCO socket and I recall there being a related kernel bug which got fixed some time back. You might want to try with the latest 2.6.30-rc kernel or one of Marcel's git trees (e.g. bluetooth-testing). Those should have the issue fixed.

Johan

#2 lore raw

Hi Johan,
Changing kernels would be very difficult for me now. Would this be in reference to 'Fix SCO state handling for incoming connections' commit from Marcel Holtmann on 15 Jan 2009? I can relatively easily put in this change.

Brock

-----Original Message-----
From: Johan Hedberg [mailto:[email protected]]
Sent: Thursday, May 07, 2009 4:25 PM
To: Brock Denson
Cc: [email protected]
Subject: Re: bluez 4.x questions, SCO stops

Hi Brock,

Quoted 7 lines · Brock Denson

I am having a problem with SCO stopping after 1 minute that I would really appreciate some help with. I can connect to the headset, query responses, etc, but when I start sco either via a dbus-send command or with the test-telephony play <> command then after 30 seconds I get a dbus timeout and then 30 more seconds later the SCO will stop. I have air-traced the session and can see that the host is sending silence while SCO is being transmitted, so it seems functional, but I am sure

I

Quoted 1 line

am missing something. I have included just about everything I can

think

Quoted 2 lines

of below in the hopes that someone has a few minutes to point out the problem. Distribution is FC10.

You've got several occurences of the following in the logs:
bluetoothd[25721]: connect(): Connection timed out (110)

I'm pretty sure that's coming for the SCO socket and I recall there being
a related kernel bug which got fixed some time back. You might want to try
with the latest 2.6.30-rc kernel or one of Marcel's git trees (e.g. bluetooth-testing). Those should have the issue fixed.

Johan

To report this email as spam click
https://www.mailcontrol.com/sr/rAh+GXBN20nTndxI!oX7UsdpzMR7Bo2KTOUX18r2s
UgefAez5Mzz7yd1bhrfSNyTdIWXn92SVA2toBNtFUgrMg== .

#3 lore raw
In reply to Johan Hedberg

-----Original Message-----
From: Johan Hedberg [mailto:[email protected]]
Sent: Thursday, May 07, 2009 4:25 PM
To: Brock Denson
Cc: [email protected]
Subject: Re: bluez 4.x questions, SCO stops

Hi Brock,

Quoted 7 lines · Brock Denson

I am having a problem with SCO stopping after 1 minute that I would really appreciate some help with. I can connect to the headset, query responses, etc, but when I start sco either via a dbus-send command or with the test-telephony play <> command then after 30 seconds I get a dbus timeout and then 30 more seconds later the SCO will stop. I have air-traced the session and can see that the host is sending silence while SCO is being transmitted, so it seems functional, but I am sure

I

Quoted 1 line

am missing something. I have included just about everything I can

think

Quoted 2 lines

of below in the hopes that someone has a few minutes to point out the problem. Distribution is FC10.

You've got several occurences of the following in the logs:
bluetoothd[25721]: connect(): Connection timed out (110)

I'm pretty sure that's coming for the SCO socket and I recall there being
a related kernel bug which got fixed some time back. You might want to try
with the latest 2.6.30-rc kernel or one of Marcel's git trees (e.g. bluetooth-testing). Those should have the issue fixed.

Johan

[mbd] So I went back and took the changes from Marcel's commit c89b6e6bda... and this appears to fix the problem I was seeing. Thanks a lot for your help.

To report this email as spam click
https://www.mailcontrol.com/sr/rAh+GXBN20nTndxI!oX7UsdpzMR7Bo2KTOUX18r2s
UgefAez5Mzz7yd1bhrfSNyTdIWXn92SVA2toBNtFUgrMg== .

#4 lore raw

PATCH 1/1 Fix introspection issue in gdbus

Hi Marcel,

Attached is a patch to fix a small issue with introspection when using gdbus library. Basically the introspection data for '/' can never be invalidated, which leads to funny results when objects are added & removed from '/' hierarchy.

Attached patch should fix the issue.

Regards,
-Denis

From 3cd7a2c3483ceac8950c32d0c96786b15e05946f Mon Sep 17 00:00:00 2001
From: Denis Kenzior <[email protected]>
Date: Wed, 1 Apr 2009 16:56:53 -0500
Subject: [PATCH] Make the parent path invalidateable

---
 gdbus/object.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)
gdbus/object.c +5 -1
index 2823054..3186921 100644
@@ -307,7 +307,11 @@ static void invalidate_parent_data(DBusConnection *conn, const char *child_path)
 	if (!slash)
 		goto done;
 
-	*slash = '\0';
+	if (slash == parent_path && parent_path[1] != '\0')
+		parent_path[1] = '\0';
+	else
+		*slash = '\0';
+
 	if (!strlen(parent_path))
 		goto done;
 
Signature · 1 line
1.6.0.6
maintainer
#5 lore raw

Re: [PATCH] Fix introspection issue in gdbus

Hi Denis,

please don't hijack older threads :)

Quoted 6 lines

Attached is a patch to fix a small issue with introspection when using gdbus library. Basically the introspection data for '/' can never be invalidated, which leads to funny results when objects are added & removed from '/' hierarchy.

Attached patch should fix the issue.

patch has been applied to BlueZ, obexd, ConnMan and oFono. Thanks.

Regards

Marcel