Skip to contentSkip to conversation

powerpc/pci: clean up direct access to sysdata by iseries platform

PATCH Superseded Kumar Gala 2 participants 3 messages May 15, 2009 – May 18, 2009 PowerPC

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Kumar Gala

author
#0 lore raw

PATCH v2 1/1 powerpc/pci: clean up direct access to sysdata by iseries platform

We shouldn't directly access sysdata to get the device node. We should be calling pci_device_to_OF_node().

---
* Updated based on sfr's iseries pci fix patch

 arch/powerpc/platforms/iseries/iommu.c |    2 +-
 arch/powerpc/platforms/iseries/pci.c   |    8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)
arch/powerpc/platforms/iseries/iommu.c +1 -1
index 4021982..224913a 100644
@@ -177,7 +177,7 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
 static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
 {
 	struct iommu_table *tbl;
-	struct device_node *dn = pdev->sysdata;
+	struct device_node *dn = pci_device_to_OF_node(dev);
 	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
 
arch/powerpc/platforms/iseries/pci.c +4 -4
index 21cddc3..175aac8 100644
@@ -318,6 +318,7 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 {
 	struct resource *bar_res = &dev->resource[bar_num];
 	long bar_size = pci_resource_len(dev, bar_num);
+	struct device_node *dn = pci_device_to_OF_node(dev);
 
 	/*
 	 * No space to allocate, quick exit, skip Allocation.
@@ -335,9 +336,9 @@ static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
 	 * Allocate the number of table entries needed for BAR.
 	 */
 	while (bar_size > 0 ) {
-		iomm_table[current_iomm_table_entry] = dev->sysdata;
+		iomm_table[current_iomm_table_entry] = dn;
 		ds_addr_table[current_iomm_table_entry] =
-			iseries_ds_addr(dev->sysdata) | (bar_num << 24);
+			iseries_ds_addr(dn) | (bar_num << 24);
 		bar_size -= IOMM_TABLE_ENTRY_SIZE;
 		++current_iomm_table_entry;
 	}
@@ -410,7 +411,7 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 	struct device_node *node;
 	int i;
 
-	node = find_device_node(bus, pdev->devfn);
+	node = pci_device_to_OF_node(pdev);
 	pr_debug("PCI: iSeries %s, pdev %p, node %p\n",
 		 pci_name(pdev), pdev, node);
 	if (!node) {
@@ -441,7 +442,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
 		}
 	}
 
-	pdev->sysdata = node;
 	allocate_device_bars(pdev);
 	iseries_device_information(pdev, bus, *sub_bus);
 }
Signature · 1 line
1.6.0.6
author
#1 lore raw
Quoted 10 lines · Kumar Gala

We shouldn't directly access sysdata to get the device node. We should be calling pci_device_to_OF_node().

---
* Updated based on sfr's iseries pci fix patch

arch/powerpc/platforms/iseries/iommu.c |    2 +-
arch/powerpc/platforms/iseries/pci.c   |    8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)

Stephen if you can test this version that would be great.

thanks

- k

#2 lore raw
Quoted 10 lines · Kumar Gala
Quoted 8 lines · Kumar Gala

We shouldn't directly access sysdata to get the device node. We should
be calling pci_device_to_OF_node().

---
* Updated based on sfr's iseries pci fix patch

Quoted 5 lines
Quoted 3 lines
arch/powerpc/platforms/iseries/iommu.c |    2 +-
arch/powerpc/platforms/iseries/pci.c   |    8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)

Stephen if you can test this version that would be great.

Fails with:

/home/benh/linux-powerpc-test/arch/powerpc/platforms/iseries/iommu.c: In function ‘pci_dma_dev_setup_iseries’:
/home/benh/linux-powerpc-test/arch/powerpc/platforms/iseries/iommu.c:180: error: ‘dev’ undeclared (first use in this function) /home/benh/linux-powerpc-test/arch/powerpc/platforms/iseries/iommu.c:180: error: (Each undeclared identifier is reported only once /home/benh/linux-powerpc-test/arch/powerpc/platforms/iseries/iommu.c:180: error: for each function it appears in.)

(I suspect it should have been "pdev" instead of "dev")

Cheers,
Ben.