ARM: MTD: add NOR lash driver for Freescale MXC
Subsystems (2)
PATCH 1/1 ARM: MTD: add NOR lash driver for Freescale MXC
This adds a driver for Freescale MXC's NOR flash.
The driver is taken from Freescale's BSP - I just made it compile for current kernel versions and cleaned up the CodingStyle here and there.
Successfully tested on a MX31 board.
--- drivers/mtd/maps/Kconfig | 10 +++ drivers/mtd/maps/Makefile | 1 + drivers/mtd/maps/mxc_nor.c | 184 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 195 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/maps/mxc_nor.c
drivers/mtd/maps/Kconfig +10 -0
@@ -562,4 +562,14 @@ config MTD_VMU To build this as a module select M here, the module will be called vmu-flash. +config MTD_MXC + tristate "Map driver for Freescale MXC boards" + depends on MTD && ARCH_MXC + default y + select MTD_CFI + select MTD_PARTITIONS + help + This enables access to the flash chips on Freescale MXC based + platforms. If you have such a board, say 'Y'. + endmenu
drivers/mtd/maps/Makefile +1 -0
@@ -62,3 +62,4 @@ obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o +obj-$(CONFIG_MTD_MXC) += mxc_nor.o
drivers/mtd/maps/mxc_nor.c new file +184 -0
184 lines not on this page · raw message
Signature · 1 line
1.6.2.1
Hi Daniel,
comment inline..
Quoted 134 lines · On Tue, 19 May 2009 14:07:10 +0200 Daniel Mack <[email protected]> wrote:
This adds a driver for Freescale MXC's NOR flash.
The driver is taken from Freescale's BSP - I just made it compile for current kernel versions and cleaned up the CodingStyle here and there.Successfully tested on a MX31 board.
Signed-off-by Daniel Mack <[email protected]>Cc Sascha Hauer <[email protected]>Cc linux-mtd <[email protected]>--- drivers/mtd/maps/Kconfig | 10 +++ drivers/mtd/maps/Makefile | 1 + drivers/mtd/maps/mxc_nor.c | 184 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 195 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/maps/mxc_nor.cdrivers/mtd/maps/Kconfig +10
-0@@ -562,4 +562,14 @@ config MTD_VMU To build this as a module select M here, the module will be called vmu-flash. +config MTD_MXC + tristate "Map driver for Freescale MXC boards" + depends on MTD && ARCH_MXC + default y + select MTD_CFI + select MTD_PARTITIONS + help + This enables access to the flash chips on Freescale MXC based + platforms. If you have such a board, say 'Y'. + endmenudrivers/mtd/maps/Makefile +1
-0@@ -62,3 +62,4 @@ obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o +obj-$(CONFIG_MTD_MXC) += mxc_nor.odrivers/mtd/maps/mxc_nor.c new file +84
-0@@ -0,0 +1,184 @@ +/* +* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. +* (c) 2005 MontaVista Software, Inc. +* +* This file contains the MTD Mapping information on the MXC. +*/ + +/* +* The code contained herein is licensed under the GNU General Public +* License. You may obtain a copy of the GNU General Public License +* Version 2 or later at the following locations: +* +* http://www.opensource.org/licenses/gpl-license.html +* http://www.gnu.org/copyleft/gpl.html +*/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/ioport.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/clocksource.h> +#include <asm/mach-types.h> +#include <asm/mach/flash.h> + +#define DVR_VER "2.0" + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probes[] = {"RedBoot" ,"cmdlinepart" ,NULL }; +#endif + +#ifdef CONFIG_MTD_XIP +struct clocksource *mtd_xip_clksrc; +#endif + +struct mxcflash_info { +struct mtd_partition *parts; +struct mtd_info *mtd; +struct map_info map; +}; + +static int __devinit mxcflash_probe (struct platform_device *pdev) +{ +int err, nr_parts =0 ; +struct mxcflash_info *info; +struct flash_platform_data *flash = pdev->dev.platform_data; +struct resource *res = pdev->resource; +unsigned long size = res->end - res->start +1 ; + + info =kzalloc (sizeof (struct mxcflash_info ),GFP_KERNEL ); +if (!info) +return -ENOMEM ; + +if (!request_mem_region (res->start, size,"flash" )) { + err = -EBUSY ; + goto out_free_info; + } + + info->map.virt =ioremap (res->start, size); +if (!info->map.virt) { + err = -ENOMEM ; + goto out_release_mem_region; + } + + info->map.name = pdev->name; + info->map.phys = res->start; + info->map.size = size; + info->map.bankwidth = flash->width; + +#ifdef CONFIG_MTD_XIP + mtd_xip_clksrc =clocksource_get_next (); +#endif + +simple_map_init (&info->map); + info->mtd =do_map_probe (flash->map_name, &info->map); + +if (!info->mtd) { + err = -EIO ; + goto out_iounmap;
drivers/mtd/maps/mxc_nor.c line 94
Quoted 10 lines
drivers/mtd/maps/mxc_nor.c new file +10
-0+ } + + info->mtd->owner =THIS_MODULE ; + +#ifdef CONFIG_MTD_PARTITIONS + nr_parts = +parse_mtd_partitions (info->mtd, part_probes, &info->parts,0 ); +if (nr_parts >0 ) { +add_mtd_partitions (info->mtd, info->parts, nr_parts); + }else if (nr_parts <0 && flash->parts) {
Since cmdlinepart partition parser return 0 also if no partition definition is passed by command line, I suggest:
} else if (nr_parts <= 0 && flash->parts) {so static partitioning is supported.
Quoted 90 lines
drivers/mtd/maps/mxc_nor.c new file +90
-0+ add_mtd_partitions(info->mtd, flash->parts, flash->nr_parts); + } else +#endif + { +dev_info (&pdev->dev,"no partition info available, " +"registering whole flash\n" ); +add_mtd_device (info->mtd); + } + +platform_set_drvdata (pdev, info); +return 0 ; + +out_iounmap: +iounmap (info->map.virt); +out_release_mem_region: +release_mem_region (res->start, size); +out_free_info: +kfree (info); + +return err; +} + +static int __devexit mxcflash_remove(struct platform_device *pdev) +{ + +struct mxcflash_info *info =platform_get_drvdata (pdev); +struct flash_platform_data *flash = pdev->dev.platform_data; + +platform_set_drvdata (pdev,NULL ); + +if (!info) +return 0 ; + +if (info->parts) { +del_mtd_partitions (info->mtd); +kfree (info->parts); + }else if (flash->parts) +del_mtd_partitions (info->mtd); +else +del_mtd_device (info->mtd); + +map_destroy (info->mtd); +release_mem_region (info->map.phys, info->map.size); +iounmap ((void __iomem *)info->map.virt); +kfree (info); + +return 0 ; +} + +static struct platform_driver mxcflash_driver = { + .driver = { + .name ="mxc_nor_flash" , + }, + .probe = mxcflash_probe, + .remove =__devexit_p (mxcflash_remove), +}; + +/* +* This is the module's entry function. It passes board specific +* config details into the MTD physmap driver which then does the +* real work for us. After this function runs, our job is done. +*/ +static int __init mxc_mtd_init (void ) +{ +pr_info ("MXC MTD nor Driver %s\n" ,DVR_VER ); +if (platform_driver_register (&mxcflash_driver) !=0 ) { +printk (KERN_ERR "Driver register failed for mxcflash_driver\n" ); +return -ENODEV ; + } + +return 0 ; +} + +/* +* This function is the module's exit function. It's empty because the +* MTD physmap driver is doing the real work and our job was done after +* mxc_mtd_init() runs. +*/ +static void __exit mxc_mtd_exit(void) +{ +platform_driver_unregister (&mxcflash_driver); +} + +module_init (mxc_mtd_init); +module_exit (mxc_mtd_exit); + +MODULE_AUTHOR ("Freescale Semiconductor, Inc." ); +MODULE_DESCRIPTION ("MTD map and partitions for Freescale MXC boards" ); +MODULE_LICENSE ("GPL" ); +
Sascha Hauer
maintainerQuoted 3 lines · Daniel Mack
This adds a driver for Freescale MXC's NOR flash.
The driver is taken from Freescale's BSP - I just made it compile for current kernel versions and cleaned up the CodingStyle here and there.
Why do we need this driver? This is what the physmap driver is for.
Sascha
Quoted 235 lines
Successfully tested on a MX31 board.
Signed-off-by Daniel Mack <[email protected]>Cc Sascha Hauer <[email protected]>Cc linux-mtd <[email protected]>--- drivers/mtd/maps/Kconfig | 10 +++ drivers/mtd/maps/Makefile | 1 + drivers/mtd/maps/mxc_nor.c | 184 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 195 insertions(+), 0 deletions(-) create mode 100644 drivers/mtd/maps/mxc_nor.cdrivers/mtd/maps/Kconfig +10
-0@@ -562,4 +562,14 @@ config MTD_VMU To build this as a module select M here, the module will be called vmu-flash. +config MTD_MXC + tristate "Map driver for Freescale MXC boards" + depends on MTD && ARCH_MXC + default y + select MTD_CFI + select MTD_PARTITIONS + help + This enables access to the flash chips on Freescale MXC based + platforms. If you have such a board, say 'Y'. + endmenudrivers/mtd/maps/Makefile +1
-0@@ -62,3 +62,4 @@ obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o obj-$(CONFIG_MTD_VMU) += vmu-flash.o +obj-$(CONFIG_MTD_MXC) += mxc_nor.odrivers/mtd/maps/mxc_nor.c new file +184
-0@@ -0,0 +1,184 @@ +/* +* Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved. +* (c) 2005 MontaVista Software, Inc. +* +* This file contains the MTD Mapping information on the MXC. +*/ + +/* +* The code contained herein is licensed under the GNU General Public +* License. You may obtain a copy of the GNU General Public License +* Version 2 or later at the following locations: +* +* http://www.opensource.org/licenses/gpl-license.html +* http://www.gnu.org/copyleft/gpl.html +*/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/ioport.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> +#include <linux/clocksource.h> +#include <asm/mach-types.h> +#include <asm/mach/flash.h> + +#define DVR_VER "2.0" + +#ifdef CONFIG_MTD_PARTITIONS +static const char *part_probes[] = {"RedBoot" ,"cmdlinepart" ,NULL }; +#endif + +#ifdef CONFIG_MTD_XIP +struct clocksource *mtd_xip_clksrc; +#endif + +struct mxcflash_info { +struct mtd_partition *parts; +struct mtd_info *mtd; +struct map_info map; +}; + +static int __devinit mxcflash_probe (struct platform_device *pdev) +{ +int err, nr_parts =0 ; +struct mxcflash_info *info; +struct flash_platform_data *flash = pdev->dev.platform_data; +struct resource *res = pdev->resource; +unsigned long size = res->end - res->start +1 ; + + info =kzalloc (sizeof (struct mxcflash_info ),GFP_KERNEL ); +if (!info) +return -ENOMEM ; + +if (!request_mem_region (res->start, size,"flash" )) { + err = -EBUSY ; + goto out_free_info; + } + + info->map.virt =ioremap (res->start, size); +if (!info->map.virt) { + err = -ENOMEM ; + goto out_release_mem_region; + } + + info->map.name = pdev->name; + info->map.phys = res->start; + info->map.size = size; + info->map.bankwidth = flash->width; + +#ifdef CONFIG_MTD_XIP + mtd_xip_clksrc =clocksource_get_next (); +#endif + +simple_map_init (&info->map); + info->mtd =do_map_probe (flash->map_name, &info->map); + +if (!info->mtd) { + err = -EIO ; + goto out_iounmap; + } + + info->mtd->owner =THIS_MODULE ; + +#ifdef CONFIG_MTD_PARTITIONS + nr_parts = +parse_mtd_partitions (info->mtd, part_probes, &info->parts,0 ); +if (nr_parts >0 ) { +add_mtd_partitions (info->mtd, info->parts, nr_parts); + }else if (nr_parts <0 && flash->parts) { +add_mtd_partitions (info->mtd, flash->parts, flash->nr_parts); + } else +#endif + { +dev_info (&pdev->dev,"no partition info available, " +"registering whole flash\n" ); +add_mtd_device (info->mtd); + } + +platform_set_drvdata (pdev, info); +return 0 ; + +out_iounmap: +iounmap (info->map.virt); +out_release_mem_region: +release_mem_region (res->start, size); +out_free_info: +kfree (info); + +return err; +} + +static int __devexit mxcflash_remove(struct platform_device *pdev) +{ + +struct mxcflash_info *info =platform_get_drvdata (pdev); +struct flash_platform_data *flash = pdev->dev.platform_data; + +platform_set_drvdata (pdev,NULL ); + +if (!info) +return 0 ; + +if (info->parts) { +del_mtd_partitions (info->mtd); +kfree (info->parts); + }else if (flash->parts) +del_mtd_partitions (info->mtd); +else +del_mtd_device (info->mtd); + +map_destroy (info->mtd); +release_mem_region (info->map.phys, info->map.size); +iounmap ((void __iomem *)info->map.virt); +kfree (info); + +return 0 ; +} + +static struct platform_driver mxcflash_driver = { + .driver = { + .name ="mxc_nor_flash" , + }, + .probe = mxcflash_probe, + .remove =__devexit_p (mxcflash_remove), +}; + +/* +* This is the module's entry function. It passes board specific +* config details into the MTD physmap driver which then does the +* real work for us. After this function runs, our job is done. +*/ +static int __init mxc_mtd_init (void ) +{ +pr_info ("MXC MTD nor Driver %s\n" ,DVR_VER ); +if (platform_driver_register (&mxcflash_driver) !=0 ) { +printk (KERN_ERR "Driver register failed for mxcflash_driver\n" ); +return -ENODEV ; + } + +return 0 ; +} + +/* +* This function is the module's exit function. It's empty because the +* MTD physmap driver is doing the real work and our job was done after +* mxc_mtd_init() runs. +*/ +static void __exit mxc_mtd_exit(void) +{ +platform_driver_unregister (&mxcflash_driver); +} + +module_init (mxc_mtd_init); +module_exit (mxc_mtd_exit); + +MODULE_AUTHOR ("Freescale Semiconductor, Inc." ); +MODULE_DESCRIPTION ("MTD map and partitions for Freescale MXC boards" ); +MODULE_LICENSE ("GPL" ); +Signature · 1 line
1.6.2.1
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Quoted 6 lines · Sascha Hauer
Quoted 3 lines · Daniel Mack
This adds a driver for Freescale MXC's NOR flash.
The driver is taken from Freescale's BSP - I just made it compile for current kernel versions and cleaned up the CodingStyle here and there.Why do we need this driver? This is what the physmap driver is for.
Totally right, forget about that - the generic driver works fine (see patch 6/8 in my last set).
Thanks,
Daniel