IEEE 802.15.4 implementation for Linux
Subsystems (5)
Hi,
As a part of research activities in the Embedded Systems - Open Platform Group from Siemens Corporate Technology we are working on adding support for the IEEE 802.15.4 Wireless Personal Area Networks to the Linux. Our current implementation is neither certified nor even feature complete. However we'd like to present current state of our patchset to the Linux developers community to gain comments, fixes, ideas, etc. This is not yet a pull request, but more like an RFC.
The project page is available at http://apps.sourceforge.net/trac/linux-zigbee
with source code of kernel part available from git at
http://zigbee-linux.git.sourceforge.net, mirrored for convenience atgit://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
The source code for userspace utils is available from git at
http://linux-zigbee.git.sourceforge.net/
Several comments about our implementation:
* As with 802.11 there are two types of devices: the smart ones that implement most parts of the protocol by themselves and more or less dumb ones which simply send and receive what they are told. Currently we do only support the second type of devices (SoftMAC)
* The implementation is split between code driving radio, (master, mwpanX
interface: mdev.c), code processing frames according the IEEE 802.15.4 rules (slave wpanX devices) and finally sockets (af_ieee802154.c, dgram.c, raw.c).
* We do present two example drivers using our stack. One is purely virtual one either looping the packets back or connecting several virtual interfaces (the one at fakelb.c), and the driver for the Freescale MC13192 evaluation boards (13192-SARD, 13192-EVK) using our custom firmware (currently only available at request, we are working on publishing it). The driver for the Atmel at86rf230/at86rf231 chips will follow in several weeks.
The following changes since commit 59a3759d0fe8d969888c741bb33f4946e4d3750d:
Linus Torvalds (1):
Linux 2.6.30-rc7
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git for-review-v0
Dmitry Eremin-Solenikov (5):
Add constants for the ieee 802.15.4/ZigBee stack
net: add IEEE 802.15.4 partial implementation
ieee802154: add socket address family code
ieee802154: add virtual loopback driver
ieee802154: add serial dongle driver
drivers/Makefile | 1 + drivers/ieee802154/Kconfig | 26 + drivers/ieee802154/Makefile | 4 + drivers/ieee802154/fakelb.c | 335 +++++++++++ drivers/ieee802154/serial.c | 1001 ++++++++++++++++++++++++++++++++ drivers/net/Kconfig | 2 + include/linux/if.h | 2 + include/linux/if_arp.h | 2 + include/linux/if_ether.h | 2 + include/linux/socket.h | 6 +- include/linux/tty.h | 3 +- include/net/ieee802154/af_ieee802154.h | 65 ++ include/net/ieee802154/beacon.h | 53 ++ include/net/ieee802154/beacon_hash.h | 40 ++ include/net/ieee802154/const.h | 696 ++++++++++++++++++++++ include/net/ieee802154/crc.h | 38 ++ include/net/ieee802154/dev.h | 107 ++++ include/net/ieee802154/mac_def.h | 96 +++ include/net/ieee802154/netdev.h | 74 +++ include/net/ieee802154/nl.h | 166 ++++++ include/net/ieee802154/phy.h | 117 ++++ net/Kconfig | 1 + net/Makefile | 1 + net/core/dev.c | 6 +- net/core/sock.c | 3 + net/ieee802154/Kconfig | 12 + net/ieee802154/Makefile | 6 + net/ieee802154/af_ieee802154.c | 312 ++++++++++ net/ieee802154/beacon.c | 251 ++++++++ net/ieee802154/beacon_hash.c | 105 ++++ net/ieee802154/crc.c | 73 +++ net/ieee802154/dev.c | 935 +++++++++++++++++++++++++++++ net/ieee802154/dgram.c | 372 ++++++++++++ net/ieee802154/mac_cmd.c | 226 +++++++ net/ieee802154/main.c | 175 ++++++ net/ieee802154/mdev.c | 189 ++++++ net/ieee802154/netlink.c | 637 ++++++++++++++++++++ net/ieee802154/raw.c | 249 ++++++++ net/ieee802154/scan.c | 211 +++++++ net/ieee802154/start.c | 46 ++ 40 files changed, 6642 insertions(+), 4 deletions(-) create mode 100644 drivers/ieee802154/Kconfig create mode 100644 drivers/ieee802154/Makefile create mode 100644 drivers/ieee802154/fakelb.c create mode 100644 drivers/ieee802154/serial.c create mode 100644 include/net/ieee802154/af_ieee802154.h create mode 100644 include/net/ieee802154/beacon.h create mode 100644 include/net/ieee802154/beacon_hash.h create mode 100644 include/net/ieee802154/const.h create mode 100644 include/net/ieee802154/crc.h create mode 100644 include/net/ieee802154/dev.h create mode 100644 include/net/ieee802154/mac_def.h create mode 100644 include/net/ieee802154/netdev.h create mode 100644 include/net/ieee802154/nl.h create mode 100644 include/net/ieee802154/phy.h create mode 100644 net/ieee802154/Kconfig create mode 100644 net/ieee802154/Makefile create mode 100644 net/ieee802154/af_ieee802154.c create mode 100644 net/ieee802154/beacon.c create mode 100644 net/ieee802154/beacon_hash.c create mode 100644 net/ieee802154/crc.c create mode 100644 net/ieee802154/dev.c create mode 100644 net/ieee802154/dgram.c create mode 100644 net/ieee802154/mac_cmd.c create mode 100644 net/ieee802154/main.c create mode 100644 net/ieee802154/mdev.c create mode 100644 net/ieee802154/netlink.c create mode 100644 net/ieee802154/raw.c create mode 100644 net/ieee802154/scan.c create mode 100644 net/ieee802154/start.c
Signature · 7 lines
With best wishes Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 1/5 Add constants for the ieee 802.15.4/ZigBee stack
IEEE 802.15.4/ZigBee stack requires several constants to be defined/adjusted.
--- include/linux/if.h | 2 ++ include/linux/if_arp.h | 2 ++ include/linux/if_ether.h | 2 ++ include/linux/socket.h | 6 +++++- net/core/dev.c | 6 ++++-- net/core/sock.c | 3 +++ 6 files changed, 18 insertions(+), 3 deletions(-)
include/linux/if.h +2 -0
@@ -68,6 +68,8 @@#define IFF_MASTER_ARPMON 0x100/* bonding master, ARP mon in use */ #define IFF_WAN_HDLC 0x200/* WAN HDLC device */ +#define IFF_IEEE802154_COORD 0x100/* IEEE802.15.4 PAN coordinator */ +#define IF_GET_IFACE 0x0001/* for querying only */ #define IF_GET_PROTO 0x0002
include/linux/if_arp.h +2 -0
@@ -86,6 +86,8 @@#define ARPHRD_IEEE80211 801/* IEEE 802.11 */ #define ARPHRD_IEEE80211_PRISM 802/* IEEE 802.11 + Prism2 header */ #define ARPHRD_IEEE80211_RADIOTAP 803/* IEEE 802.11 + radiotap header */ +#define ARPHRD_IEEE802154 804 +#define ARPHRD_IEEE802154_PHY 805#define ARPHRD_PHONET 820/* PhoNet media type */ #define ARPHRD_PHONET_PIPE 821/* PhoNet pipe header */
include/linux/if_ether.h +2 -0
@@ -106,6 +106,8 @@#define ETH_P_DSA 0x001B/* Distributed Switch Arch. */ #define ETH_P_TRAILER 0x001C/* Trailer switch tagging */ #define ETH_P_PHONET 0x00F5/* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6/* IEEE802.15.4 frame */ +#define ETH_P_IEEE802154_MAC 0x00F7/* IEEE802.15.4 MAC frame */ /* * This is an Ethernet frame header.
include/linux/socket.h +5 -1
@@ -194,7 +194,9 @@ struct ucred {#define AF_RXRPC 33/* RxRPC sockets */ #define AF_ISDN 34/* mISDN sockets */ #define AF_PHONET 35/* Phonet sockets */ -#define AF_MAX 36/* For now.. */ +#define AF_IEEE802154 36/* IEEE802154 sockets */ +#define AF_ZIGBEE 37/* ZIGBEE sockets */ +#define AF_MAX 38/* For now.. */ /* Protocol families, same as address families. */ #define PF_UNSPEC AF_UNSPEC
@@ -233,6 +235,8 @@ struct ucred {#define PF_RXRPC AF_RXRPC#define PF_ISDN AF_ISDN#define PF_PHONET AF_PHONET +#define PF_IEEE802154 AF_IEEE802154 +#define PF_ZIGBEE AF_ZIGBEE#define PF_MAX AF_MAX/* Maximum queue length specifiable by listen. */
net/core/dev.c +4 -2
@@ -268,7 +268,8 @@ static const unsigned short netdev_lock_type[] =ARPHRD_IRDA ,ARPHRD_FCPP ,ARPHRD_FCAL ,ARPHRD_FCPL ,ARPHRD_FCFABRIC ,ARPHRD_IEEE802_TR ,ARPHRD_IEEE80211 ,ARPHRD_IEEE80211_PRISM ,ARPHRD_IEEE80211_RADIOTAP ,ARPHRD_PHONET , - ARPHRD_PHONET_PIPE, ARPHRD_VOID, ARPHRD_NONE}; +ARPHRD_PHONET_PIPE ,ARPHRD_IEEE802154 ,ARPHRD_IEEE802154_PHY , + ARPHRD_VOID, ARPHRD_NONE};static const char *netdev_lock_name[] = {"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25",
@@ -285,7 +286,8 @@ static const char *netdev_lock_name[] ="_xmit_IRDA" ,"_xmit_FCPP" ,"_xmit_FCAL" ,"_xmit_FCPL" ,"_xmit_FCFABRIC" ,"_xmit_IEEE802_TR" ,"_xmit_IEEE80211" ,"_xmit_IEEE80211_PRISM" ,"_xmit_IEEE80211_RADIOTAP" ,"_xmit_PHONET" , - "_xmit_PHONET_PIPE", "_xmit_VOID", "_xmit_NONE"}; +"_xmit_PHONET_PIPE" ,"_xmit_IEEE802154" ,"_xmit_IEEE802154_PHY" , + "_xmit_VOID", "_xmit_NONE"};static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE (netdev_lock_type)];static struct lock_class_key netdev_addr_lock_key[ARRAY_SIZE (netdev_lock_type)];
net/core/sock.c +3 -0
@@ -155,6 +155,7 @@ static const char *af_family_key_strings[AF_MAX+1] = {"sk_lock-27" ,"sk_lock-28" ,"sk_lock-AF_CAN" ,"sk_lock-AF_TIPC" ,"sk_lock-AF_BLUETOOTH" ,"sk_lock-IUCV" ,"sk_lock-AF_RXRPC" ,"sk_lock-AF_ISDN" ,"sk_lock-AF_PHONET" , +"sk_lock-AF_IEEE802154" ,"sk_lock-AF_ZIGBEE" ,"sk_lock-AF_MAX" }; static const char *af_family_slock_key_strings[AF_MAX+1] = {
@@ -170,6 +171,7 @@ static const char *af_family_slock_key_strings[AF_MAX+1] = {"slock-27" ,"slock-28" ,"slock-AF_CAN" ,"slock-AF_TIPC" ,"slock-AF_BLUETOOTH" ,"slock-AF_IUCV" ,"slock-AF_RXRPC" ,"slock-AF_ISDN" ,"slock-AF_PHONET" , +"slock-AF_IEEE802154" ,"slock-AF_ZIGBEE" ,"slock-AF_MAX" }; static const char *af_family_clock_key_strings[AF_MAX+1] = {
@@ -185,6 +187,7 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = {"clock-27" ,"clock-28" ,"clock-AF_CAN" ,"clock-AF_TIPC" ,"clock-AF_BLUETOOTH" ,"clock-AF_IUCV" ,"clock-AF_RXRPC" ,"clock-AF_ISDN" ,"clock-AF_PHONET" , +"clock-AF_IEEE802154" ,"clock-AF_ZIGBEE" ,"clock-AF_MAX" };
Signature · 1 line
1.6.2.4
PATCH 2/5 net: add IEEE 802.15.4 partial implementation
Add support for communication over IEEE 802.15.4 networks. This implementation is neither certified nor complete, but aims to that goal. This commit contains only parts of MAC implementation, socket code and drivers supporting this stack will follow.
Initial implementation was done by Maxim Gorbachyov, Maxim Osipov and Pavel Smolensky as a research project at Siemens AG. Later the stack was heavily reworked to better suit the linux networking model, and is now maitained as an open project partially sponsored by Siemens.
--- include/net/ieee802154/af_ieee802154.h | 65 +++ include/net/ieee802154/beacon.h | 53 ++ include/net/ieee802154/beacon_hash.h | 40 ++ include/net/ieee802154/const.h | 696 ++++++++++++++++++++++++ include/net/ieee802154/crc.h | 38 ++ include/net/ieee802154/dev.h | 107 ++++ include/net/ieee802154/mac_def.h | 96 ++++ include/net/ieee802154/netdev.h | 74 +++ include/net/ieee802154/nl.h | 166 ++++++ include/net/ieee802154/phy.h | 117 ++++ net/Kconfig | 1 + net/Makefile | 1 + net/ieee802154/Kconfig | 12 + net/ieee802154/Makefile | 5 + net/ieee802154/beacon.c | 251 +++++++++ net/ieee802154/beacon_hash.c | 105 ++++ net/ieee802154/crc.c | 73 +++ net/ieee802154/dev.c | 935 ++++++++++++++++++++++++++++++++ net/ieee802154/mac_cmd.c | 226 ++++++++ net/ieee802154/main.c | 175 ++++++ net/ieee802154/mdev.c | 189 +++++++ net/ieee802154/netlink.c | 637 ++++++++++++++++++++++ net/ieee802154/scan.c | 211 +++++++ net/ieee802154/start.c | 46 ++ 24 files changed, 4319 insertions(+), 0 deletions(-) create mode 100644 include/net/ieee802154/af_ieee802154.h create mode 100644 include/net/ieee802154/beacon.h create mode 100644 include/net/ieee802154/beacon_hash.h create mode 100644 include/net/ieee802154/const.h create mode 100644 include/net/ieee802154/crc.h create mode 100644 include/net/ieee802154/dev.h create mode 100644 include/net/ieee802154/mac_def.h create mode 100644 include/net/ieee802154/netdev.h create mode 100644 include/net/ieee802154/nl.h create mode 100644 include/net/ieee802154/phy.h create mode 100644 net/ieee802154/Kconfig create mode 100644 net/ieee802154/Makefile create mode 100644 net/ieee802154/beacon.c create mode 100644 net/ieee802154/beacon_hash.c create mode 100644 net/ieee802154/crc.c create mode 100644 net/ieee802154/dev.c create mode 100644 net/ieee802154/mac_cmd.c create mode 100644 net/ieee802154/main.c create mode 100644 net/ieee802154/mdev.c create mode 100644 net/ieee802154/netlink.c create mode 100644 net/ieee802154/scan.c create mode 100644 net/ieee802154/start.c
include/net/ieee802154/af_ieee802154.h new file +65 -0
@@ -0,0 +1,65 @@ +/* +* IEEE 802.15.4 inteface for userspace +* +* Copyright 2007, 2008 Siemens AG +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +* +* Written by: +* Sergey Lapin <[email protected]> +* Dmitry Eremin-Solenikov <[email protected]> +*/ + +#ifndef _AF_IEEE802154_H +#define _AF_IEEE802154_H + +#include <linux/socket.h> /* for sa_family_t */ + +enum { +IEEE802154_ADDR_NONE =0x0 , +/* RESERVED = 0x01, */ +IEEE802154_ADDR_SHORT =0x2 ,/* 16-bit address + PANid */ +IEEE802154_ADDR_LONG =0x3 ,/* 64-bit address + PANid */ +}; + +/* address length, octets */ +#define IEEE802154_ADDR_LEN 8 + +struct ieee802154_addr { +int addr_type; +u16 pan_id; +union { +u8 hwaddr[IEEE802154_ADDR_LEN ]; +u16 short_addr; + }; +}; + +struct sockaddr_ieee802154 { +sa_family_t family;/* AF_IEEE802154 */ +struct ieee802154_addr addr; +}; + +/* master device */ +#define IEEE802154_SIOC_ADD_SLAVE (SIOCDEVPRIVATE + 0) + +#ifdef __KERNEL__ +#include <linux/skbuff.h> +#include <linux/netdevice.h> +extern struct proto ieee802154_raw_prot; +extern struct proto ieee802154_dgram_prot; +void ieee802154_raw_deliver (struct net_device *dev,struct sk_buff *skb); +int ieee802154_dgram_deliver (struct net_device *dev,struct sk_buff *skb); +#endif + +#endif
include/net/ieee802154/beacon.h new file +53 -0
53 lines not on this page · raw message
include/net/ieee802154/beacon_hash.h new file +40 -0
@@ -0,0 +1,40 @@ +/* +* MAC beacon hash storage +* +* Copyright 2007, 2008 Siemens AG +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +* +* Written by: +* Sergey Lapin <[email protected]> +* Dmitry Eremin-Solenikov <[email protected]> +*/ + +#ifndef IEEE802154_BEACON_HASH_H +#define IEEE802154_BEACON_HASH_H + +#define IEEE802154_BEACON_HTABLE_SIZE 256 + +struct beacon_node { +struct hlist_node list; +struct ieee802154_addr coord_addr; +u16 pan_addr; +}; +struct beacon_node *ieee802154_beacon_find_pan (struct ieee802154_addr *coord_addr, +u16 pan_addr); +void ieee802154_beacon_hash_add (struct ieee802154_addr *coord_addr); +void ieee802154_beacon_hash_del (struct ieee802154_addr *coord_addr); +void ieee802154_beacon_hash_dump (void ); +#endif +
include/net/ieee802154/const.h new file +696 -0
696 lines not on this page · raw message
include/net/ieee802154/crc.h new file +38 -0
@@ -0,0 +1,38 @@ +/* +* based on crc-itu-t.c. +* Basically it's CRC-ITU-T but with inverted bit numbering +* +* Copyright 2007, 2008 Siemens AG +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 +* as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. +* +* Written by: +* Dmitry Eremin-Solenikov <[email protected]> +*/ + +extern const u16 ieee802154_crc_table[256 ]; + +static inline u16 ieee802154_crc_byte (u16 crc,const u8 data) +{ +return (crc >>8 ) ^ ieee802154_crc_table[(crc ^ data) &0xff ]; +} + +static inline u16 ieee802154_crc (u16 crc,const u8 *buffer,size_t len) +{ +while (len--) + crc =ieee802154_crc_byte (crc, *buffer++); +return crc; +} + +
include/net/ieee802154/dev.h new file +107 -0
107 lines not on this page · raw message
include/net/ieee802154/mac_def.h new file +96 -0
96 lines not on this page · raw message
include/net/ieee802154/netdev.h new file +74 -0
74 lines not on this page · raw message
include/net/ieee802154/nl.h new file +166 -0
166 lines not on this page · raw message
include/net/ieee802154/phy.h new file +117 -0
117 lines not on this page · raw message
net/Kconfig +1 -0
@@ -179,6 +179,7 @@ source "net/lapb/Kconfig" source "net/econet/Kconfig" source "net/wanrouter/Kconfig" source "net/phonet/Kconfig" +source "net/ieee802154/Kconfig" source "net/sched/Kconfig" source "net/dcb/Kconfig"
net/Makefile +1 -0
@@ -60,6 +60,7 @@ obj-$(CONFIG_NET_9P) += 9p/ ifneq ($(CONFIG_DCB),) obj-y += dcb/ endif +obj-y += ieee802154/ ifeq ($(CONFIG_NET),y) obj-$(CONFIG_SYSCTL) += sysctl_net.o
net/ieee802154/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +config IEEE802154 + tristate "IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support (EXPERIMENTAL)" + depends on EXPERIMENTAL + ---help--- + IEEE Std 802.15.4 defines a low data rate, low power and low complexity + short range wireless personal area networks. It was designed to + organise networks of sensors, switches, etc automation devices. Maximum + allowed data rate is 250 kb/s and typical personal operating space + around 10m. + + Say Y here to compile LR-WPAN support into the kernel or say M to + compile it as modules.
net/ieee802154/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +obj-$(CONFIG_IEEE802154) += ieee802154.o +ieee802154-objs := main.o mdev.o dev.o netlink.o mac_cmd.o scan.o \ + crc.o beacon.o beacon_hash.o start.o + +EXTRA_CFLAGS += -Wall -DDEBUG
net/ieee802154/beacon.c new file +251 -0
251 lines not on this page · raw message
net/ieee802154/beacon_hash.c new file +105 -0
105 lines not on this page · raw message
net/ieee802154/crc.c new file +73 -0
73 lines not on this page · raw message
net/ieee802154/dev.c new file +935 -0
935 lines not on this page · raw message
net/ieee802154/mac_cmd.c new file +226 -0
153 lines not on this page · raw message
net/ieee802154/main.c new file +175 -0
175 lines not on this page · raw message
net/ieee802154/mdev.c new file +189 -0
189 lines not on this page · raw message
net/ieee802154/netlink.c new file +637 -0
637 lines not on this page · raw message
net/ieee802154/scan.c new file +211 -0
211 lines not on this page · raw message
net/ieee802154/start.c new file +46 -0
46 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.6.2.4
Part of the diff is not shown here. View the raw message.
PATCH 3/5 ieee802154: add socket address family code
Add support for BSD sockets over the IEEE 802.15.4 networks. One can either send RAW datagrams or use SOCK_DGRAM to encapsulate data inside normal IEEE 802.15.4 packets.
--- net/ieee802154/Makefile | 3 +- net/ieee802154/af_ieee802154.c | 312 +++++++++++++++++++++++++++++++++ net/ieee802154/dgram.c | 372 ++++++++++++++++++++++++++++++++++++++++ net/ieee802154/raw.c | 249 +++++++++++++++++++++++++++ 4 files changed, 935 insertions(+), 1 deletions(-) create mode 100644 net/ieee802154/af_ieee802154.c create mode 100644 net/ieee802154/dgram.c create mode 100644 net/ieee802154/raw.c
net/ieee802154/Makefile +2 -1
@@ -1,5 +1,6 @@ -obj-$(CONFIG_IEEE802154) += ieee802154.o +obj-$(CONFIG_IEEE802154) += ieee802154.o af_802154.o ieee802154-objs := main.o mdev.o dev.o netlink.o mac_cmd.o scan.o \ crc.o beacon.o beacon_hash.o start.o +af_802154-objs := af_ieee802154.o raw.o dgram.o EXTRA_CFLAGS += -Wall -DDEBUG
net/ieee802154/af_ieee802154.c new file +312 -0
312 lines not on this page · raw message
net/ieee802154/dgram.c new file +372 -0
372 lines not on this page · raw message
net/ieee802154/raw.c new file +249 -0
249 lines not on this page · raw message
Signature · 1 line
1.6.2.4
A message that is not in the archive (sent off-list or not yet received): 1243336988-20109-3-git-send-email-dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
PATCH 4/5 ieee802154: add virtual loopback driver
fakelb is a virtual loopback driver implementing one or several interconnected radios. Packets from the radio are either sent back to the node (if no other fake radio are registered) or to all other fake radio.
--- drivers/Makefile | 1 + drivers/ieee802154/Kconfig | 23 +++ drivers/ieee802154/Makefile | 3 + drivers/ieee802154/fakelb.c | 335 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/Kconfig | 2 + 5 files changed, 364 insertions(+), 0 deletions(-) create mode 100644 drivers/ieee802154/Kconfig create mode 100644 drivers/ieee802154/Makefile create mode 100644 drivers/ieee802154/fakelb.c
drivers/Makefile +1 -0
@@ -107,3 +107,4 @@ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_STAGING) += staging/ obj-y += platform/ +obj-y += ieee802154/
drivers/ieee802154/Kconfig new file +23 -0
@@ -0,0 +1,23 @@ +menuconfig IEEE802154_DRIVERS + bool "IEEE 802.15.4 drivers" + depends on NETDEVICES && IEEE802154 + default y + ---help--- + Say Y here to get to see options for IEEE 802.15.4 Low-Rate + Wireless Personal Area Network device drivers. This option alone + does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if IEEE802154_DRIVERS && NETDEVICES && IEEE802154 +config IEEE802154_FAKELB + tristate "Fake LR-WPAN driver with several interconnected devices" + ---help--- + Say Y here to enable the fake driver that can emulate a net + of several interconnected radio devices. + + This driver can also be built as a module. To do so say M here. + The module will be called 'fakelb'. + +endif +
drivers/ieee802154/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o + +EXTRA_CFLAGS += -DDEBUG -DCONFIG_FFD
drivers/ieee802154/fakelb.c new file +335 -0
335 lines not on this page · raw message
drivers/net/Kconfig +2 -0
@@ -2704,6 +2704,8 @@ source "drivers/net/wan/Kconfig" source "drivers/atm/Kconfig" +source "drivers/ieee802154/Kconfig" + source "drivers/s390/net/Kconfig" config XEN_NETDEV_FRONTEND
Signature · 6 lines
1.6.2.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH 5/5 ieee802154: add serial dongle driver
Add a tty ldisc supporting IEEE 802.15.4 over serial line. Currently the only protocol implemented/device supported is our firmware for Freescale 13192 evaluation boards.
--- drivers/ieee802154/Kconfig | 3 + drivers/ieee802154/Makefile | 1 + drivers/ieee802154/serial.c | 1001 +++++++++++++++++++++++++++++++++++++++++++ include/linux/tty.h | 3 +- 4 files changed, 1007 insertions(+), 1 deletions(-) create mode 100644 drivers/ieee802154/serial.c
drivers/ieee802154/Kconfig +3 -0
@@ -19,5 +19,8 @@ config IEEE802154_FAKELB This driver can also be built as a module. To do so say M here. The module will be called 'fakelb'. +config IEEE802154_SERIAL + tristate "Simple LR-WPAN UART driver" + endif
drivers/ieee802154/Makefile +1 -0
@@ -1,3 +1,4 @@ obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o +obj-$(CONFIG_IEEE802154_SERIAL) += serial.o EXTRA_CFLAGS += -DDEBUG -DCONFIG_FFD
drivers/ieee802154/serial.c new file +1001 -0
1,001 lines not on this page · raw message
include/linux/tty.h +2 -1
@@ -23,7 +23,7 @@*/ #define NR_UNIX98_PTY_DEFAULT 4096/* Default maximum for Unix98 ptys */ #define NR_UNIX98_PTY_MAX (1 << MINORBITS)/* Absolute limit */ -#define NR_LDISCS 19 +#define NR_LDISCS 20/* line disciplines */ #define N_TTY 0
@@ -46,6 +46,7 @@#define N_GIGASET_M101 16/* Siemens Gigaset M101 serial DECT adapter */ #define N_SLCAN 17/* Serial / USB serial CAN Adaptors */ #define N_PPS 18/* Pulse per Second */ +#define N_IEEE802154 19/* Serial / USB serial IEEE802154.4 devices */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as
Signature · 1 line
1.6.2.4
A message that is not in the archive (sent off-list or not yet received): 1243336988-20109-2-git-send-email-dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Re: [PATCH 2/5] net: add IEEE 802.15.4 partial implementation
On Tue, 2009-05-26 at 15:23 +0400, Dmitry Eremin-Solenikov wrote:
[...]
Quoted 5 lines
include/net/ieee802154/af_ieee802154.h new file +0
-0
[...]
include/net/ieee802154/af_ieee802154.h line 58
Quoted 3 lines
include/net/ieee802154/af_ieee802154.h new file +3
-0+#ifdef __KERNEL__ +#include <linux/skbuff.h> +#include <linux/netdevice.h>
The struct declarations would be sufficient.
Quoted 12 lines
include/net/ieee802154/af_ieee802154.h new file +7
-0+extern struct proto ieee802154_raw_prot; +extern struct proto ieee802154_dgram_prot; +void ieee802154_raw_deliver (struct net_device *dev,struct sk_buff *skb); +int ieee802154_dgram_deliver (struct net_device *dev,struct sk_buff *skb); +#endif + +#endif include/net/ieee802154/beacon.h new file +0
-0
[...]
include/net/ieee802154/beacon.h line 39
Quoted 9 lines
include/net/ieee802154/beacon.h new file +9
-0+/* Per spec; optimizations are needed */ +struct ieee802154_pandsc { +struct list_head list; +struct ieee802154_addr addr;/* Contains panid */ +int channel; +u16 sf; +bool gts_permit; +u8 lqi; +u32 timestamp;/* FIXME */
When and how does this need to be fixed, if at all?
Quoted 4 lines
include/net/ieee802154/beacon.h new file +4
-0+bool security; +u8 mac_sec; +bool sec_fail; +};
[...]
Quoted 2 lines
include/net/ieee802154/const.h new file +0
-0
[...]
Quoted 5 lines
+/* Time related constants, in microseconds.
+ *
+ * The 1SYM_TIME values are shown how much time is needed to transmit one
+ * symbol across media.
+ * The callculation is following:
Quoted 8 lines
+ * For a 2450 MHZ radio freq rate is 62,5 ksym/sec. A byte (8 bit) transfered
+ * by low 4 bits in first symbol, high 4 bits in next symbol. So, to transmit
+ * 1 byte in 2450Mhz freq 2 symbols are needed. Therefore we have 31,25 kbyte/sec
+ * rate. 1 symbol transfered in 16*10^(-6) sec, or 16 microseconds.
+ * For a 868Mhz and 915Mhz, 1 symbol is equal to 1 byte. So, we have 20kbyte/sec
+ * and 40 kbyte/sec respectively. And 5*10^(-5) sec and 2,5*10(-5) sec,
+ * or 50 and 25 microseconds respectively for 868Mhz and 915Mhz freq.
+ */
This is so verbose as to be unhelpful. Since the following constants only refer to symbol time, it should be sufficient to refer to the specified symbol rates.
include/net/ieee802154/const.h line 53
Quoted 10 lines
include/net/ieee802154/const.h new file +10
-0+#define IEEE802154_2450MHZ_1SYM_TIME 16 +#define IEEE802154_868MHZ_1SYM_TIME 50 +#define IEEE802154_915MHZ_1SYM_TIME 25 + +/******************************************************************************/ +/* MAC constants */ +/******************************************************************************/ +/** The number of symbols forming a superframe slot when the superframe order +* is equal to 0. +*/
Don't use two asterisks at the start of a comment unless it's in kernel-doc format.
[...]
Quoted 5 lines
+/**
+ * \brief PHY return codes description
+ *
+ * The return values of PHY operations
+ */
...and definitely don't use Doxygen format.
[...]
Quoted 1 line
+/* #define
ZB_ED_EDGE0x7f*/
Define it or delete it.
include/net/ieee802154/const.h line 694
Quoted 4 lines
include/net/ieee802154/const.h new file +4
-0+/* I've got 0xBE on idle channel; let threshold be a little higher */ +#define ZB_ED_EDGE 0xc8 +/* In an ideal world this should be 1 */ +#define IEEE802154_SLOW_SERIAL_FIXUP 75
Yes but what are these *for*?
include/net/ieee802154/crc.h line 3
Quoted 10 lines
include/net/ieee802154/const.h new file +1
-0+#endif /* IEEE802154_CONST_H */ include/net/ieee802154/crc.h new file +3
-0@@ -0,0 +1,38 @@ +/* +* based on crc-itu-t.c. +* Basically it's CRC-ITU-T but with inverted bit numbering
This can probably be handled by crc_itu_t_bitreversed():
(That patch hasn't gone anywhere yet as Greg K-H is dragging his heels over actually fixing his crap, but feel free to resubmit it as part of your own patch series.)
[...]
Quoted 2 lines
include/net/ieee802154/nl.h new file +0
-0
[...]
Quoted 5 lines
include/net/ieee802154/nl.h new file +5
-0+/* commands */ +/* REQ should be responded with CONF +* and INDIC with RESP +*/ +enum {
include/net/ieee802154/nl.h line 122
Quoted 10 lines
include/net/ieee802154/nl.h new file +10
-0+ __IEEE802154_COMMAND_INVALID, + +IEEE802154_ASSOCIATE_REQ , +IEEE802154_ASSOCIATE_CONF , +IEEE802154_DISASSOCIATE_REQ , +IEEE802154_DISASSOCIATE_CONF , +IEEE802154_GET_REQ , +IEEE802154_GET_CONF , +/* IEEE802154_GTS_REQ, */ +/* IEEE802154_GTS_CONF, */
Why are some of these commented out? Since they're apparently exposed to user-space you can't insert them later.
[...]
Quoted 2 lines
net/ieee802154/beacon.c new file +0
-0
[...]
Quoted 11 lines
net/ieee802154/beacon.c new file +11
-0+/* TODO GTS */ + gts =0 ; + +if (flags &IEEE802154_BEACON_FLAG_GTSPERMIT ) + gts |=IEEE802154_BEACON_GTS_PERMIT ; +memcpy (skb_put (skb,sizeof (gts)), >s,sizeof (gts)); + +/* FIXME pending address */ + addr16_cnt =0 ; + addr64_cnt =0 ; +#if 0
net/ieee802154/beacon.c line 186
Quoted 10 lines
net/ieee802154/beacon.c new file +10
-0+/* need more thinking about this */ +list_for_each_entry (l, al->list, list) { + struct ieee802154_addr *s = container_of(l, struct list_head, list); +if (s->addr_type ==IEEE802154_ADDR_LONG ) + addr16_cnt++; + +if (s->addr_type ==IEEE802154_ADDR_SHORT ) + addr64_cnt++; + } +#endif
This all looks very unfinished - as do several other sections with FIXME, #if 0, commented-out code...
[...]
net/ieee802154/beacon.c
Quoted 3 lines
net/ieee802154/beacon.c new file +3
-0+#define IEEE802154_FETCH_U64 (skb, var) \ + do { \ + if (skb->len < IEEE802154_ADDR_LEN) \
I see what you did there...
Quoted 3 lines
net/ieee802154/beacon.c new file +3
-0+ goto exit_error; \ +fetch_skb_u64 (skb, &var); \ + }while (0 )
[...]
net/ieee802154/netlink.c line 2
Quoted 5 lines
net/ieee802154/netlink.c new file +2
-0@@ -0,0 +1,637 @@ +/* +* Netlink intefcace for IEEE 802.15.4 stack
[...]
Speling misstake.
Ben.
Signature · 2 lines
Ben Hutchings Teamwork is essential - it allows you to blame someone else.
Re: [PATCH 2/5] net: add IEEE 802.15.4 partial implementation
Quoted 14 lines
[...]
Quoted 2 lines
include/net/ieee802154/nl.h new file +0
-0[...]
Quoted 10 lines
include/net/ieee802154/nl.h new file +10
-0+/* commands */ +/* REQ should be responded with CONF +* and INDIC with RESP +*/ +enum { + __IEEE802154_COMMAND_INVALID, + + IEEE802154_ASSOCIATE_REQ, + IEEE802154_ASSOCIATE_CONF, + IEEE802154_DISASSOCIATE_REQ,
Quoted 9 lines
include/net/ieee802154/nl.h line 122
Quoted 5 lines
+
IEEE802154_DISASSOCIATE_CONF,
+IEEE802154_GET_REQ,
+IEEE802154_GET_CONF,include/net/ieee802154/nl.h new file +2
-0+/* IEEE802154_GTS_REQ, */ +/* IEEE802154_GTS_CONF, */ Why are some of these commented out? Since they're apparently exposed to user-space you can't insert them later.
We are working to define a next version of netlink API for the stack right now. But taking into account, that iz tool & upper layers of stack will be the only users of this API at least for next year, and IEEE802.15.4 spec is evolving, it is probably not necessary to come up with a very final version.
Kind regards,
Maxim
Re: [PATCH 2/5] net: add IEEE 802.15.4 partial implementation
In reply to Ben HutchingsQuoted 8 lines · Ben Hutchings
On Tue, 2009-05-26 at 15:23 +0400, Dmitry Eremin-Solenikov wrote:
[...]Quoted 5 lines
include/net/ieee802154/af_ieee802154.h new file +0
-0[...]
Quoted 5 lines
include/net/ieee802154/af_ieee802154.h line 58
Quoted 3 lines
include/net/ieee802154/af_ieee802154.h new file +3
-0+#ifdef __KERNEL__ +#include <linux/skbuff.h> +#include <linux/netdevice.h> The struct declarations would be sufficient.
Do you mean just:
struct sk_buff;
struct net_device;
Quoted 26 lines
Quoted 11 lines
include/net/ieee802154/af_ieee802154.h new file +7
-0+extern struct proto ieee802154_raw_prot; +extern struct proto ieee802154_dgram_prot; +void ieee802154_raw_deliver (struct net_device *dev,struct sk_buff *skb); +int ieee802154_dgram_deliver (struct net_device *dev,struct sk_buff *skb); +#endif + +#endif include/net/ieee802154/const.h new file +0
-0[...]
Quoted 5 lines
+/* Time related constants, in microseconds.
+ *
+ * The 1SYM_TIME values are shown how much time is needed to transmit one
+ * symbol across media.
+ * The callculation is following:Quoted 8 lines
+ * For a 2450 MHZ radio freq rate is 62,5 ksym/sec. A byte (8 bit) transfered
+ * by low 4 bits in first symbol, high 4 bits in next symbol. So, to transmit
+ * 1 byte in 2450Mhz freq 2 symbols are needed. Therefore we have 31,25 kbyte/sec
+ * rate. 1 symbol transfered in 16*10^(-6) sec, or 16 microseconds.
+ * For a 868Mhz and 915Mhz, 1 symbol is equal to 1 byte. So, we have 20kbyte/sec
+ * and 40 kbyte/sec respectively. And 5*10^(-5) sec and 2,5*10(-5) sec,
+ * or 50 and 25 microseconds respectively for 868Mhz and 915Mhz freq.
+ */
Quoted 3 lines
This is so verbose as to be unhelpful. Since the following constants only refer to symbol time, it should be sufficient to refer to the specified symbol rates.
const.h was inherited from the previous implementation of our stack. I somehow missed that it needs a bit of polishing. A great bit.
Quoted 13 lines
include/net/ieee802154/crc.h line 3
Quoted 10 lines
include/net/ieee802154/const.h new file +1
-0+#endif /* IEEE802154_CONST_H */ include/net/ieee802154/crc.h new file +3
-0@@ -0,0 +1,38 @@ +/* +* based on crc-itu-t.c. +* Basically it's CRC-ITU-T but with inverted bit numbering This can probably be handled by
crc_itu_t_bitreversed():
Quoted 5 lines
(That patch hasn't gone anywhere yet as Greg K-H is dragging his heels over actually fixing his crap, but feel free to resubmit it as part of your own patch series.)
Fine, I'll use this patch.
Quoted 14 lines
[...]
Quoted 2 lines
include/net/ieee802154/nl.h new file +0
-0[...]
Quoted 10 lines
include/net/ieee802154/nl.h new file +10
-0+/* commands */ +/* REQ should be responded with CONF +* and INDIC with RESP +*/ +enum { + __IEEE802154_COMMAND_INVALID, + +IEEE802154_ASSOCIATE_REQ , +IEEE802154_ASSOCIATE_CONF , +IEEE802154_DISASSOCIATE_REQ ,
Quoted 8 lines
include/net/ieee802154/nl.h line 122
Quoted 5 lines
include/net/ieee802154/nl.h new file +5
-0+IEEE802154_DISASSOCIATE_CONF , +IEEE802154_GET_REQ , + IEEE802154_GET_CONF, +/* IEEE802154_GTS_REQ, */ +/* IEEE802154_GTS_CONF, */ Why are some of these commented out? Since they're apparently exposed to user-space you can't insert them later.
Those are not implemented yet. We planned on appending them later to the end of this enum. Most probably I'll just uncomment them and add simple stubs returning an error instead.
Quoted 21 lines
[...]
Quoted 2 lines
net/ieee802154/beacon.c new file +0
-0[...]
Quoted 16 lines
net/ieee802154/beacon.c new file +16
-0+/* TODO GTS */ + gts =0 ; + +if (flags &IEEE802154_BEACON_FLAG_GTSPERMIT ) + gts |=IEEE802154_BEACON_GTS_PERMIT ; +memcpy (skb_put (skb,sizeof (gts)), >s,sizeof (gts)); + +/* FIXME pending address */ + addr16_cnt =0 ; + addr64_cnt =0 ; +#if 0 +/* need more thinking about this */ +list_for_each_entry (l, al->list, list) { + struct ieee802154_addr *s = container_of(l, struct list_head, list); +if (s->addr_type ==IEEE802154_ADDR_LONG ) + addr16_cnt++;
Quoted 8 lines
net/ieee802154/beacon.c line 186
Quoted 5 lines
net/ieee802154/beacon.c new file +5
-0+ +if (s->addr_type ==IEEE802154_ADDR_SHORT ) + addr64_cnt++; + } +#endif This all looks very unfinished - as do several other sections with FIXME, #if 0, commented-out code...
As I said, the code is in early stage of development.
Quoted 7 lines
[...]
net/ieee802154/beacon.c
Quoted 3 lines
net/ieee802154/beacon.c new file +3
-0+#define IEEE802154_FETCH_U64 (skb, var) \ + do { \ + if (skb->len < IEEE802154_ADDR_LEN) \I see what you did there...
???
Quoted 4 lines
Quoted 3 lines
net/ieee802154/beacon.c new file +3
-0+ goto exit_error; \ +fetch_skb_u64 (skb, &var); \ + }while (0 )[...]
Signature · 7 lines
With best wishes Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/5] net: add IEEE 802.15.4 partial implementation
Quoted 15 lines · Dmitry Eremin-Solenikov
Quoted 8 lines · Ben Hutchings
On Tue, 2009-05-26 at 15:23 +0400, Dmitry Eremin-Solenikov wrote:
[...]Quoted 5 lines
include/net/ieee802154/af_ieee802154.h new file +0
-0[...]
Quoted 5 lines
include/net/ieee802154/af_ieee802154.h line 58
Quoted 3 lines
include/net/ieee802154/af_ieee802154.h new file +3
-0+#ifdef __KERNEL__ +#include <linux/skbuff.h> +#include <linux/netdevice.h> The struct declarations would be sufficient.
Quoted 3 lines
Do you mean just:
structsk_buff;
structnet_device;
Right.
[...]
Quoted 9 lines
Quoted 7 lines
[...]
include/net/ieee802154/af_ieee802154.h
Quoted 3 lines
include/net/ieee802154/af_ieee802154.h new file +3
-0+#define IEEE802154_FETCH_U64 (skb, var) \ + do { \ + if (skb->len < IEEE802154_ADDR_LEN) \I see what you did there...
???
[...]
This macro works with u64 values, not specifically addresses, which happen to be 8 bytes long too. I infer that someone search-and-replaced instances of the literal 8 with IEEE802154_ADDR_LEN and wrongly replaced this instance.
Ben.
Signature · 2 lines
Ben Hutchings Logic doesn't apply to the real world. - Marvin Minsky
Hi Dmitry,
Le Tuesday 26 May 2009 13:21:57 Dmitry Eremin-Solenikov, vous avez écrit :
Quoted 9 lines
Hi,
As a part of research activities in the Embedded Systems - Open Platform Group from Siemens Corporate Technology we are working on adding support for the IEEE 802.15.4 Wireless Personal Area Networks to the Linux. Our current implementation is neither certified nor even feature complete. However we'd like to present current state of our patchset to the Linux developers community to gain comments, fixes, ideas, etc. This is not yet a pull request, but more like an RFC.
Let met just thank you for doing this, I am glad some people worked on this. Got a couple of questions below.
Quoted 11 lines
The project page is available at
http://apps.sourceforge.net/trac/linux-zigbee with source code of kernel part available from git at
http://zigbee-linux.git.sourceforge.net, mirrored for convenience atgit://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.gitThe source code for userspace utils is available from git at
http://linux-zigbee.git.sourceforge.net/From the project page I understand that you plan on providing a ZigBee stack,
based on this 802.15.4 stack ? Do you plan on submitting the ZigBee stack later on ?
Maybe you should mention that this implementation is royalty-free, but that commercial products using it should both respect the GPL license and pay a ZigBee royalty as per the ZigBee Alliance . That is just for clarification since right now it simply does 802.15.4 which is not subject to this royalty thing.
Quoted 10 lines
Several comments about our implementation:
* As with 802.11 there are two types of devices: the smart ones that implement most parts of the protocol by themselves and more or less dumb ones which simply send and receive what they are told. Currently we do only support the second type of devices (SoftMAC)
* The implementation is split between code driving radio, (master, mwpanX
interface:mdev.c), code processing frames according the IEEE 802.15.4 rules (slave wpanX devices) and finally sockets (af_ieee802154.c,dgram.c,raw.c).
This sounds good. Do you also plan on integrating some meshing algorithm on top of 802.15.4 ? If so,
Quoted 7 lines
* We do present two example drivers using our stack. One is purely virtual one either looping the packets back or connecting several virtual
interfaces (the one atfakelb.c), and the driver for the Freescale MC13192 evaluation boards (13192-SARD, 13192-EVK) using our custom firmware (currently only available at request, we are working on publishing it). The driver for the Atmel at86rf230/at86rf231 chips will follow in several weeks.
Is the virtual interface just like mac80211_hwsim for 802.11 ?h
Signature · 4 lines
Best regards, Florian Fainelli Email : [email protected] http://openwrt.org -------------------------------
2009/5/27 Florian Fainelli <[email protected]>:
Quoted 9 lines
Hi Dmitry,
Le Tuesday 26 May 2009 13:21:57 Dmitry Eremin-Solenikov, vous avez écrit :
Quoted 6 lines
The project page is available at
http://apps.sourceforge.net/trac/linux-zigbee with source code of kernel part available from git at
http://zigbee-linux.git.sourceforge.net, mirrored for convenience atgit://git.kernel.org/pub/scm/linux/kernel/git/lumag/lowpan.git
Quoted 6 lines
Quoted 2 lines
The source code for userspace utils is available from git at
http://linux-zigbee.git.sourceforge.net/From the project page I understand that you plan on providing a ZigBee stack, based on this 802.15.4 stack ? Do you plan on submitting the ZigBee stack later on ?
The ZigBee stack currently is in design stage of development. When it will be more or less "in shape" we will present it to the community.
Quoted 5 lines
Maybe you should mention that this implementation is royalty-free, but that commercial products using it should both respect the GPL license and pay a ZigBee royalty as per the ZigBee Alliance . That is just for clarification since right now it simply does 802.15.4 which is not subject to this royalty thing.
We will look into this, thank you for putting our attention on this topic.
Quoted 12 lines
Quoted 11 lines
Several comments about our implementation:
* As with 802.11 there are two types of devices: the smart ones that implement most parts of the protocol by themselves and more or less dumb ones which simply send and receive what they are told. Currently we do only support the second type of devices (SoftMAC)
* The implementation is split between code driving radio, (master, mwpanX
interface:mdev.c), code processing frames according the IEEE 802.15.4 rules (slave wpanX devices) and finally sockets (af_ieee802154.c,dgram.c,raw.c).
Quoted 2 lines
This sounds good. Do you also plan on integrating some meshing algorithm on top of 802.15.4 ? If so,
Hmmm. IIUC the 802.15.4 doesn't have any knowledge about meshing. It's the part of higher level protocol. ZigBee part will of course contain some kind of routing/
meshing algos. If you'd like to implement mesing over raw 802.15.4, it's up to your
protocol. We plan to provide all hooks necessary for doing this.
Quoted 9 lines
Quoted 7 lines
* We do present two example drivers using our stack. One is purely virtual one either looping the packets back or connecting several virtual interfaces (the one at
fakelb.c), and the driver for the Freescale MC13192 evaluation boards (13192-SARD, 13192-EVK) using our custom firmware (currently only available at request, we are working on publishing it). The driver for the Atmel at86rf230/at86rf231 chips will follow in several weeks.Is the virtual interface just like
mac80211_hwsimfor 802.11 ?h
More or less.We do not implement the global 'monitor' interface, only separate radios. We have a page in the wiki that describes usage of this virtual device driver:
http://apps.sourceforge.net/trac/linux-zigbee/wiki/GettingStarted
Signature · 2 lines
With best wishes Dmitry